Can't instal SMC firmware update on my MBP 1.83

Hi. I tried installing the new firmware 3 times but my MBP restarts and shows a blinking file folder with a question mark. If i then restart i start right up into OSX. I also have a partition for XP and have no problems booting using the option key. Any ideas? Thanks all!!

Hi,
First go to System Preferences -> Startup Disk -> select your Macintosh Disk, and click the lock to prevent changes.
That should do it.

Similar Messages

  • Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

    Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

    Check your Network control panel and turn off Auto-Proxy setting.
    This is one of the top #4 "how can they do this' pet-peeve errors.
    The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
    Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
    If auto proxy isn't it, router/modem and DNS settings.

  • HT204032 Can't install SMC firmware update

    I'm trying to install the SMC firmware update 1.6 on a mid-2011 Macbook Air.  First downloaded it from App Store, and after restart it was stuck at a gray screen with spinning icon, no text or progress indicator-- stayed that way overnight.  Tried downloading directly from Apple, same result.  Tried resetting SMC, then installing, same result.  It won't finish instlaling the update-- any ideas?

    Check your system profiler ...if your SMC is up to date it will read: SMC Version 1.4f12. If it is not and you have the first gen. Macbook (CoreDuo) then make certain that you are running 10.4.8 before you begin the update.
    Make sure you are following these instructions explicitly...
    To update the SMC firmware on your MacBook:
    Your computer’s power cord must be connected and plugged into a working power source.
    1. Quit all other open applications.
    2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.
    The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
    As the instructions say - you have to restart the machine via the installer. Also, you do not mention but did you have a status bar appear during the update?
    Macbook 1.8-)   Mac OS X (10.4.8)   Week 38 base model w/1G Ram

  • Macbook (late 2006) RSS unable to install SMC firmware update

    Hello,
    I bought my macbook on the 27th of December, and the first week it worked fine. Then started the RSS. I did some googling and found out some stuff about RSS, tried to install the SMC firmware update but it would just tell me that I don't need the update. After two weeks of constant RSS:ing I called applecare and told the guy about the problem, he told me to try to update the SMC and if I can't do it bring it in for service.
    Monday the 15th of January I went to the macstation in downtown Vancouver and told them about the trouble, they tried to boot it, and it actually booted but after like 3 minutes the macbook crashed. For about 10 minutes two guys tried to boot it and so on, but they didn't get it to boot. So they took it in for service and somebody was going to check out the macbook and see if it would need a replacement logic board - which it did. So on Monday they ordered the logic board, and today Monday 22nd of January I got it back. Now the thing that bothers me is that when I now try to update the SMC firmware (my current version is btw 1.13f3) it still just says that This computer does not need this update. oh well - i went to apples support page to try to see if there would be a newer release of the smc and then I noticed that in the bottom of the SMC firmware 1.1 update page it says:
    Note: This update is only or the original MacBook, and will not install on a MacBook (Late 2006).
    Then I really was like W T F?!
    I would assume that people who work for apple would know that the SMC update will not update on a computer from late 2006, but nobody ever mentioned this to me.
    I've now had the computer for about an hour and the CPU temperature is at about 50 degrees celcius, with firefox, msn and a terminal open... about 5% cpu load.
    What I'm really wondering is that is there anyone who has similar problems with a macbook late 2006? I guess I'll just have to see if it works and just like I told the guy at macstation, if it starts RSS:ing again I'll be banging on their door
    macbook 2,1 Mac OS X (10.4.8) rss, unable to install SMC firmware update
    macbook 2,1   Mac OS X (10.4.8)   rss

    See if reviewing the installation instructions provides any help:
    http://www.apple.com/support/downloads/macbookefifirmwareupdate10.html

  • Can't install EFI Firmware Update

    Hello,
    i can't install the Firmware Update (EFI 1.1) on my MacBook (Core 2Duo, OS X Version: 10.4.10).
    My System is on an GUID partition scheme.
    I get a white screen after the "long beep" and after a few minutes the cpu fan start to run.
    I disconnected all my peripherals but this does not work either.
    Any suggestions?
    Regards,
    jan

    Welcome to Apple Discussions!
    This article explains the firmware more in depth and what to do if there is an issue:
    http://docs.info.apple.com/article.html?artnum=303364

  • Error while trying to install SMC Firmware Update

    I have 2 original model 13" MacBooks doing the spontaneous shutdown thing. Both are running OS 10.4.11. One has SMC version 1.4f8, the other has SMC version 1.4f10. When I run software updater it comes up with 2 updates: MacBook EFI Firmware Update 1.0, and MacBook SMC Firmware Update 1.1. The first time I used the standard method of clicking on "Install 2 Items", etc. When the restart instructions came up, I clicked on restart, entered the password, and got the message: "An unexpected error occurred (0). Your Firmware cannot be upgraded."
    I tried again, only I selected just the SMC update instead of both. Same result. I downloaded the package and tried to install directly instead of going through Software Updater, same result. I tried installing the EFI update by itself using different methods. Same result. Using advice from another thread, I tried opening the firmware updater application directly from the utilities folder. Still get the same error.
    Anyone have any additional suggestions?

    I have 2 original model 13" MacBooks doing the spontaneous shutdown thing. Both are running OS 10.4.11. One has SMC version 1.4f8, the other has SMC version 1.4f10. When I run software updater it comes up with 2 updates: MacBook EFI Firmware Update 1.0, and MacBook SMC Firmware Update 1.1. The first time I used the standard method of clicking on "Install 2 Items", etc. When the restart instructions came up, I clicked on restart, entered the password, and got the message: "An unexpected error occurred (0). Your Firmware cannot be upgraded."
    I tried again, only I selected just the SMC update instead of both. Same result. I downloaded the package and tried to install directly instead of going through Software Updater, same result. I tried installing the EFI update by itself using different methods. Same result. Using advice from another thread, I tried opening the firmware updater application directly from the utilities folder. Still get the same error.
    Anyone have any additional suggestions?

  • How do I install the firmware update for LinkSys E900 router?

    Hi,
    I'm using Mac 10.7.5 and a few months back had purchased the E900 wireless router.  It has firmware 1.0.03 installed and I noticed there is a 1.0.04 update.  I downloaded the update, which is a .bin file, but I do not have a CD burner nor access to a Windows machine.  How can I install the firmware update?
    Thanks, - Dave
    Solved!
    Go to Solution.

    Simple, with your wired computer (never wireless) just access the GUI in the router and perform the firmware update.  Just point to the .bin file and away you go.  Make sure to hard reset the router and reconfigure it after you are done.

  • How to install Graphics Firmware Update 1.0 in Lion?

    I'm trying to install Windows 7 on a 27" iMac with a NVidia 7600GT graphics card.  Knowledgebase article HT3986 says that Graphics Firmware Update 1.0 must be installed first. I downloaded the firmware update  but on running it says the Mac OS X 10.6 is required  but I've already upgraded to Lion.
    I was able to install Windows 7 but I have to disable the graphics card for it to boot and use it in VGA mode.
    How can I install the firmware update?

    I used BC 4.0. I don't remember installing the firmware update and thought it likely that I would skip it as I didn't intend to install Windows.
    Here's the system profile information:
    NVIDIA GeForce 7600 GT:
      Chipset Model:          NVIDIA GeForce 7600 GT
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x16
      VRAM (Total):          256 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0391
      Revision ID:          0x00a1
      ROM Revision:          3022
    I can't find info on what to look for on this iMac to know if it's been updated.

  • SMC Firmware Update 1.7 "Installed Successfully" Multiple Times, But Still Not Installed

    MacBook Pro, 15", Early 2011
    OS X 10.8.2
    Software Update keeps telling me that I have the MacBook Pro SMC Firmware Update 1.7 available for my machine.  I have run this update several times, both through Software Update and through directly downloading it from http://support.apple.com/kb/HT1237
    Through either method, running the update yields the same result:  it runs, reports that the update is installed, restarts the machine, and all seems good.  However, if I run Software Update again or check the SMC version, I still have the old SMC version 1.69f3 and the same update is still available in Software Update.
    This thread -- https://discussions.apple.com/message/20649193 -- suggests running Disk Utility to find errors.  I have already run Disk Utility to check for errors (multiple times) and no errors have been reported.
    This thread -- https://discussions.apple.com/message/21320561 -- suggested running a clean installation of the OS.  The other thread's solution ultimately also was a clean installation of the OS.  Having just done that barely a month ago on this machine, I really would prefer to not do that again so soon!
    Has anyone else run into this issue and found a (hopefully less drastic) solution?  Thanks.

    I guess I just fixed it.  Do you bootcamp to windows?  Once I changed my startup disk from the windows to the mac partition, rebooted, then dd the system update, the firmware update installed and took hold. 

  • After updating the MACBOOK AIR SMC FIRMWARE UPDATE 1.9 so many times still can see update? How to get rid of this one please help.

    After updating OS X Mavericks MacBook Air SMC Firmware Update 1.9 so many times (restarted more than 10times) but then still cannot update? Please help.

    Here it is...
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *121.3 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS MACintosh HD            120.5 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    do I need to disable the FlieVault?

  • HT2368 Hello, I have MacBook Late 2008 (Unibody). And I can't install this firmware, need help. Thanks

    Hello,
    I have MacBook Late 2008 (Unibody). And I can't install this firmware MacBook SMC Firmware Update 1.5
    Need your help.
    Thanks

    Also, according the the 1.4 update page here: http://support.apple.com/kb/DL974
    It will update the Boot ROM version (on MB 5,1) to MB51.007D.003.
    Yet I have (MB 5,1) Boot ROM version MB51.007D.B03. Weird again!
    What a mess Apple. Considering how important firmware updates are you'd think they could make this a little clearer.
    Anyways, again, I don't think we need it.

  • Mac Pro SMC Firmware Update 1.1 keeps repeating

    Recently I had my MacPro motherboard replaced by an Authorized Repair Center, and for the most part, everything has been working great since.  That said, as I've been performing my regular software updates, I've noticed that the "Mac Pro SMC Firmware Update 1.1" keeps appearing as new update.  I've installed this update multiple times now (or it seemed as though I did), but it keeps appearing with each new update.
    Is there some way I can complete the update?  Is it possible that there is some serial number conflict between my old/new motherboard that is preventing this?  Do I need to return my machine to the repair center?
    Thanks for any help.

    Did you actually run the update from your Utilities folder (where I believe it ends up)? You'll go through a process of rebooting and hearing the long tone / seeing grey screen and progress bar. Until it's actually run properly, you'll keep seeing reminders.
    Matt

  • MacBook Pro SMC Firmware Update 1.3 update freezes mouse pointer

    After installing the update released today 5/28 (MacBook Pro SMC Firmware Update 1.3) my mouse pointer stalls, freezes on occasion. Very annoying. Anyone seeing the same. Fixes ... ?

    After applying the SMC Firmware update a few days ago, my keyboard and trackpad were acting erratic (freezing, hanging). It was immediately after the update and I had not had any problems with it before.
    I have also had random crashes, inability to use the keyboard/trackpad ever since.
    Today my keyboard and trackpad are completely unusable, external mouse works fine.
    I will take it to an Apple store tomorrow, hopefully my firmware can be reverted.
    Sounds like a lot of other people are having problems with this update. http://discussions.apple.com/thread.jspa?messageID=9549034&tstart=0#9549034

  • Mac Pro SMC Firmware Update "An Unexpected Error Occurred (0)" HELP

    Mac Pro SMC Firmware Update (Version 1.1) Size (970 KB)
    "The SMC Firmware Update adjusts fan behavior in Mac Pro. The updater application will be installed in the /Applications/Utilities folder and will launch automatically. Please follow the instructions in the updater application to complete the process."
    -----THIS IS WHAT HAPPEND TO ME----I try this morning to install and this is what I got:
    " An unexpected error occurred (0).
    Your firmware can not be Updated. "
    "See www.apple.com/support for more information."

    Are you booting from RAID? even though it warns that you can't be booting from RAID, some people still run the update.
    Any problem with your system?
    While it only says that you need to quit any and all open programs, sometimes it helps to reboot (and boot into Safe Mode) just to begin the process.
    When there was an SMC Firmware update before (last fall) some people also had trouble.
    We aren't mind readers, and to say it failed doesn't give those of us reading this (and non of us are Apple tech support) a lot to go on.
    +Please follow the instructions in the updater application to complete the process.+
    +To update the SMC firmware on your Mac Pro:+
    +Your computer’s power cord must be connected and plugged into a working power source.+
    +1. Quit all other open applications.+
    +2. Click Restart in the Mac Pro SMC Firmware Update window and wait for your computer to restart.+
    +The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.+
    +Important: Do not interrupt the update.+
    +Your computer restarts automatically when the update is completed and opens the Mac Pro SMC Firmware Update.+
    +3. Click OK. The SMC firmware is now up-to-date.+
    +If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.+
    Note:
    +This update requires a Macintosh formatted disk or partition. If you are starting up using a RAID (Redundant Array of Independent Disks) subsystem, you must attach a Macintosh formatted storage device to apply this update.+
    *+Some USB and FireWire devices may prevent firmware updates from installing correctly.+*
    *If you are having trouble installing an update try disconnecting non-essential devices and use only an Apple branded keyboard, mouse and monitor.+*
    http://www.apple.com/support/downloads/macprosmcfirmwareupdate11.html

  • SMC firmware update 1.4 for Tiger? Does it exist?

    Hey everyone,
    I got a new L-style charger for my old (2006) MacBook Pro. Now it doesn't work, which I've come to learn is a known problem related to the firmware (the charger works fine in new MBPs, and my MBP charges fine with the old T-style chargers). In order to fix the problem, I need to install the SMC Firmware update 1.4, but I'm not finding one that works for 10.4.11 (only 10.5 and higher). Does one exist? If not, how does Apple expect me fix the problem? Sink more money into it? Any help would be appreciated. Thanks.
    -

    You many have to try calling Apple sales/support and ask to speak to a
    product specialist about the charger adapter you have this problem with.
    There may be a different version of the charger, or an older style new
    stock model required for your computer which matches its hardware.
    Or, check with a third party reseller of original Apple hardware parts to
    see if you can get the original AC adapter without the L variant.
    The 1-800-MY-APPLE number would get you the main Apple sales
    and sales support division; same as the main web page call center.
    Other than this suggestion, due to the difference in build model year,
    I have no other ideas at this time. Other than it's time for coffee...
    Good luck & happy computing!

Maybe you are looking for

  • How can I retrieve my old back ups?

    I was having a probelm with my Iphone today and it wouldn't back up via icload, so i backed up to labtop and it gave me an error and couldn't send backup. it asked me to reset, so i did and it reset to a 4 month ago version. how can i see my last bac

  • SM58 : Internal error when accessing a table

    Hi there, We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the

  • Lost media need download acrobat X1 standard

    cannot see how I get download replacement.  I have the key for my original download.

  • Deactivation of my photoshop elements 8 serial number

    I need to deactivate my devices from my serial number of photoshop elements 8 help please?

  • Brother HL-1230 for Mac OS X 10.5.8

    I'm finding that it's extremely difficult to find driver downloads for Mac OS versions higher than 10.1 for my Brother HL-1230. I've seen a few posts about 'finally figuring it out,' but without completely describing how. I'm not technical... can any