Can't install 10.3.2 please help!!

I just tried to install Panther to my iMac 350 with OS 9.2 and the firmware update.
When I try to install, after it says restart, I get a message that says, "startup disk was unable to select CD as start up disk."
I went to the startup disk control panel and I can see the 10.3.2 install disk, but I can't choose it.
Please help if you can. Is this, perhaps, an update and not a 10 install?
Thank you
Allan

allano:
To install Panther your computer will need to meet the minimum system requirements for Panther.
You will also need to purchase the Full Retail version of Panther. Please note that Computer specific or upgrade versions should be avoided since they are optimized for the computer to which they are specific and will therefore, very likely, cause problems during or after installation. On the legal side, it may be a violation of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...You can purchase universal installer Panther disks, guaranteed to install, from applerescue.
If your computer meets the above qualitifcations and if you have a Full Retai Version of Panther, try this proceure for installation:
Warning! Be sure you have a tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
Boot from you install disk holding down the "C" key.
When booted, select language.
Go to Instaaller menu (Panther & earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
After Permissions are repaired Click Repair Disk.
Quit Disk Utility.
Open Installer and begin installation.
Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Check box to install BSD subsystem.
Proceed with installation.
After installation computer will restart for setup.
After setup, reboot computer.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Connect to Internet.
Download and install 10.3.9 Combo Update
Restart computer.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
If you run into issues with this please post back.
Good luck.
corneliius
Message was edited by: cornelius

Similar Messages

IMovie 08 Requirements. Can't install iMovie 08! Please help!

I have a G5 Dual 2.0 Ghz PPC with 2gb of memory.
I am trying to install iLife 08.
The requirements say:
iLife ’08 requirements
Hardware: Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
• iMovie requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0GHz or faster), or an iMac G5 (1.9GHz or faster)
• iDVD requires 733MHz or faster processor
512MB of RAM; 1GB recommended; high-definition video requires at least 1GB of RAM
I have the minimum.
Why can't I install iMovie if i have the minimum requirements?
Please help! I bought iLife 08 just to run the new iMovie. Don't tell me i have to purchase a new computer now?!?
Thanks!

As Ben says, solved, it is.
Here's my little saga:
Upon detaching the 24" from the ATI 9200 and restarting, the installation, including iMovie, went without a hitch. Again, this is with the 9200 still seated comfortably in its PCI slot.
After reattaching the display and restarting, iMovie '08 would not even launch. I was greeted with a small dialog box:
"*Quartz Extreme Required*
iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics cards does not support Quartz Extreme."
The only button was Quit. As a comparison, I then launched iMovie '06. I was greeted with this:
"*Your computer contains a graphics card which may not support iMovie.*
iMovie requires a “Quartz Extreme Compatible” graphics card. Certain iMovie features such as Themes, Ken Burns Photos, and Video FX may not work properly with your graphics card."
In this instance, however, my options were "Quit" and "Launch iMovie." Selecting "Launch iMovie" allowed me to use the application, but without the Quartz animations.
Definitely a "kinder, gentler" iMovie.
Whenever I wish to use either version of iMovie, I'll have to unplug the third display, and restart before I can get down to business.
Two things of interest to me are:
1) What would happen if I had unplugged the third display and restarted, launched iMovie (either version, but '08 especially), and then hot-attached the third display to the 9200? I'm curious to see what would happen. Naturally, attaching and un-attaching displays to a running Mac is not recommended, but it's been fairly common practice in the Mac repair shops at which I've worked. *I definitely do not recommend it, as you may end up frying something.*
That being said, I'm still curious to see if iMovie would still run properly, freeze, or quit.
2) Remember a few generations of Mac OS X back there was a little software hack called "PCI Extreme?" It's purpose was to fool an application into thinking you were Quartz enabled. There were many caveats, most notably that it could not perform magic on older cards, but many folks had success with it in Jaguar and Panther. Now, it seems, a few Tiger users are playing with it. The developer’s notes mention the following:
"Unfortunately, because Apple hardcoded the setting into CoreGraphics, I'm not aware of a way to enable both AGP and PCI graphics quartz acceleration at the same time. If you know a way, please let me know."
Therein, as the Bard tells us, lies the rub. Still, this avenue remains interesting. If I knew the first thing about coding, I'd delve into this to see if there was a method by which an application like iMovie would at least "ignore" the 9200 (as in this particular case) and just let the X850 XT do its thing.
For the adventurous among you, PCI Extreme is still available and does, to some extent, function in Tiger. You can get a it at http://www.macupdate.com/info.php/id/8979#descContainer_link
I agree that this issue is solved insofar as the boundaries of the initial question posted by Marc. It's the geeky can of worms that follows that will nag at me for a while.
This is ironic, as I use iMovie so infrequently I shouldn’t be concerned by this, especially seeing as there is a work-around if at least one of your installed cards is, indeed, capable of baring the brunt.
The biggest lingering issue, to me, is why can't we have a better, more powerful PCI option than the 9200? I suppose the answer is; "There is. It's called a Mac Pro."
This has been a fun one. Good work, everyone!
As always, I remain your humble crooner.
crooner

I can't install mac OS X please help me!!

i can't install my macbook pro cuz i have problem. so how should i do?? can everyone help me how to do?, i can't install my macbook pro cuz i have problem. so how should i do?? can everyone help me how to do?
when i select the disk where i want to install Mac OS X . they thay have messege is
to install on this disk open disk ulitities by choosing ulitities - disk ulitities and repartition this disk using GUID Partition table important you will lose all data on this by repartitioning it
here but i don't uderstand how to do

you have to go to the disk utility and select the hard drive, then choose partition, partition the drive to your choice and make shure that jurnaling is enabled.
Hope this helps!

Can't Install CS4 properly. Please help.

Hi,
I've looked around, this forum and other forums for help, but nothing has availed.
I have tried so many things such as running the winCS4cleanupScript.
Problem:
When i try to install CS4, everything seems fine until a message pops up saying,
Installation has failed, following programs failed to install, adobe premiere & some other program.
I click continue, and happens again to all the programs.
In the end the error code was 1603, Looked something like this:
Adobe Photoshop CS4
Error:
Error 1603. Fatal error during installation.
Adobe Bridge CS4
Error:
Error 1603. Fatal error during installation.
Adobe Device Central CS4
Error:
Error 1603. Fatal error during installation. etc.
Any help would be appreciated.

Hi Tim,
Follow the mentioned below steps it will work for you.
1) Download and install the Windows Installer CleanUp Utility here:
http://support.microsoft.com/kb/290301
2) Download, unzip, and run the Adobe Windows CS3 Cleanup Script (which relies on the Windows program mentioned above to run) here:
http://www.adobe.com/support/contact/cs3clean.html
Please run level 3 of the cleanup script to make it work.
As I said before, even though the Cleanup Script says it’s for CS3, it did work for me in installing CS4 as well.
Note: This is something we should use with Win 32 not with Win 64.
Regards,
Sam

I can't install Adobe flash payer, please help me!

When i want install Adobe flash player this happen--->
Please someone help me

I had the same problem. Later I found a post that said to use this link: [To avoid malware, always download software directly from the vendor] http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It's worked for me. Good luck.

My iphone5 has no facetime.. how can i install on it?please help me..

help me..how will i install facetime on my iphone:(

where did you buy the phone? facetime is banned in many middle east countries. if you didn't buy it in the middle east, go to settings and scroll down to facetime. there is no app for facetime on the iphone.

I just downloaded the newest version of Itunes. I can't delete anything and I can't sync to my MP3 player. I tried deleting it and installing an earlier version of Itunes but it can't read the library. Please help.

I just downloaded the newest version of Itunes on my Windows 7 PC. I can't delete anything and I can't sync to my MP3 player. I tried deleting it and installing an earlier version of Itunes but it can't read the library. Please help.

With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
This screenshot is from a Mac, but it should be similar on a PC :

How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

Hi mujabee1111,
Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
Download CS5 products
Regards,
Sheena

I just install Photoshop CC. I try to open the file picture. All open as solid black picture. But on the right side under layer I can see little pic preview. Please help!

I just install Photoshop CC. I try to open the file picture. All open as solid black picture. But on the right side under layer I can see little pic preview. Please help!

These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

HT1365 Hi I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help

Hi everybody,
I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
Thanks

Hello:
There was an OS X 10.7 update released a month or so ago that fixed this problem. Run software update.
Barry

I believe that I have a keylogger or some sort of spyware installed on my mac, please help!

I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro.

I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro.

Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!

Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!
My MBP will not "see" my new MB or my back-up drive—both connected via a firewire 400 (6 pin) cable. Both running Tiger X.4.11
I have used this cable to connect my MBP and a TiBook in the past as well as to back-up onto the LaCie e-drive.
I have run "disk repair" and "permissions" on both machines.
BTW—"permissions" are regularly out of wack on the MBP. But, the disk is OK according to Disk Utilities.
I also cannot put the machine to sleep after logging out. Has a hard time shutting down as well. Sometimes I need to force a re-boot.
Can't run Disk Doctor because I don't have a bootable disk yet. It's coming via snail mail.
The new MB "sees" the e-drive connected with the same cable.
I can't transfer my files to the new MB nor can I back up.
Is it time for a "clean install"? Makes me nervous that I cannot backup before trying anything drastic.
Can someone please help me?
Thanks in advance.
Tek

Put the more recalcitrant computer into Target Drive mode by starting it with the T key down until you see the yellow on blue screen. Then connect it to the other machine by firewire cable while both are already awake.
I hope that you did not do any upgrades while you had external drives connected... that is an automatic problem. Always disconnect from externals and accessories before doing any upgrades. Always back up before doing any upgrades.
Firewire networking is not the same as using a computer in Target Disc mode. In Target disc mode, you are using the internal drive of the Td computer as an external. That should allow you to run disk utility. Do use the proper disc utility version for the OSX version that is on problem drive. ie don't use the Leopard disc utility for the Tiger disc or vice versa.

I can't find my redemption code, please help!

I can't find my redemption code, please help!

You have purchased Creative Cloud Photography plan on Sept. 26, 2014.
If the CC is asking for serial number then please follow the steps in http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
To download the CC purchased you need to install &activate it. Please refer to
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Download and Installation Help
Hope it resolves your issue.
Regards
Rajshree

I have bought a CS5 suite (student) 2 years back. I have lost the original box and DVD. Now I am migrating to another computer and I couldnt find a source to install the CS5. Please help.

I have bought a CS5 suite (student) 2 years back. I have lost the original box and DVD. Now I am migrating to another computer and I couldnt find a source to install the CS5. Please help.
I couldnt even contact adobe direct to address the issue.

If you registered with Adobe, your authorization number will be in your account on Adobe's website. Then you can use their downloads page and download CS5 and install it. A search on their main page will get you to the download page.

I bought new Macbook Pro 13" around two months before .My Apple ID is working on all other things except app store . It is buffering for a lot of time and lastly coming on screen " can not connect to app store " Please help me

I bought new Macbook Pro 13" around two months before .My Apple ID is working on all other things except app store . It is buffering for a lot of time and lastly coming on screen " can not connect to app store " Please help me

Have you tried repairing disk permissions : iTunes download error -45054

Can't install 10.3.2 please help!!

Similar Messages

Maybe you are looking for