Can't install a modem on my KT3 Ultra2

I have just built a system with a kt3 ultra2 mobo and I have tried to install several modems and none will install. windows recognizes the modem on startup but says there is no modem installed when it looks for a modem.any help would greatly appreciated.

usb modem ? seriall modem ? os ?

Similar Messages

USB2.0 Install Troubles With WinXP and KT3 Ultra2?

I installed WinXP (Fresh) on my system with the KT3 Ultra2 board in it. I had ACPI (Plug and Play OS Installed) turned OFF in the bios, and I have all 6 USB ports enabled in bios (legacy support off).
Upon installing WinXP and the SP1 full update (~130mb file I believe), I check the device manager to see what was up so far. I had several yellow exclamation marks, but two of the three were expected (onboard audio and my video card had no drivers yet). But the third one threw me... Under "Other devices" I had "USB Host Controller" listed....
So I installed the Via 4in1's version 4.43 using the "quick install" option. Check device manager, same result. Mr. Steveo suggested I try right clicking the controller in the device manager and choosing to "update driver". I did, and it automatically updated the driver and placed it in the USB section of the device manager (with the other USB entries).
The problem is, the device name seems weird: "Enhanced PCI to USB Host Controller" instead of something like "USB2.0 PCI to USB Host Controller" or something like that. The yellow exclamation mark is gone, but I just dont know if this is the correct device setup or not.
Can any of you other Ultra2 owners tell me if this is what you have in your USB controller list, and if not, how did you install WinXP to get to the point where you had the "correct" listing? Maybe it makes a difference whether ACPI is turned on during install or something?
I tried to run the Via USB2.0 driver file (7011Kb) from the MSI site to see if it would help, but it quits the install and says that the SP1 update drivers are newer and should not be updated with this driver.
Any suggestions or comments are very much appreciated.
Kyle
Detroit, MI

Quote
Originally posted by Stevesmith
I have a new 845E Max2 motherboard and installed Windows XP.
I have a similar USB2 problem after installing XP SP1 - yellow question marks in the hardware manager under "Other Hardware"/"USB (Universal Serial Bus)-Controller".
I tried "Uninstalling" the USB controller as was suggested in the forum, but it won't let itself be removed.
When I try "Search for new hardware" it shows a message that an error occurred when installing the hardware, and that the hardware is not properly configured (Code 1). It suggests that I re-install the driver. When I select "re-install driver", I just get another error message. It asks me if I have a CD or disk wit drivers, but I can't find anything appropriate on the driver disk I got with the motherboard.
Does anyone have an idea what's wrong?
Regards Steve
Hi, yours is 845E MAX2 motherboard, you should use Intel USB2.0 drivers .
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php
And don't use "search for new hardware", instead you manually point the drivers location to where you extracted the downloaded file. Sometimes WinXP drivers search is "blind" 8)

Tecra M9 PTM91E - Can I install 3G modem and Turbo memory module?

Hi guys,
I have this notebook, but I want install aditional mini express card, like a 3G modem and Intel Turbo memory module, but I dont have free connector.
I bought two mini express conectors and solder on mainboard. But cards dont working in notebook. I must somthing enable in BIOS or solder aditional component? Second question is, I want web cam, I have one crom old notebok which is connected across USB. Have this motherboard any free USB conector?
Sry for my English. THX guys

hi Fab30,
i wonder how you know where to solder the components on the mainboard, some kind of magic i suppose...
if you wanna use your "self-soldered" items make sure that the chipset is able to handle it....
otherwise use a 3g-modem on usb...
the intel turbo memory... as far as i know this is a special chip on the mainboard which stores data to exalerate your os...
if you wanna use these features you have some options:
- redesign mainboard to your need, some reverse engineering have to be done too
- buy a notebook which has the desired features in it
in my point of view buying a new one will be easier....

KT3 Ultra2 won't run XP 2500 at more than 151 Mhz

Not an unusual topic I know but I haven't found any solutions in this forum as yet!
With my XP 2000 cpu installed my system is stable when the FSB is overclocked to 150 Mhz. When I install the XP 2500 cpu and set the FSB in the BIOS (latest vertsion) to 166 Mhz it won't access the hard drives at all. My initial thought was the psu so I reduced the system to 1 hdd, 1 DVD rewriter, 256Mb memory and tried again. No change! Then I started reducing the FSB until at 151 Mhz it would boot but as an XP 1900 cpu. The VIA chipset drivers are up to date.
I' don't know what to try next. Any ideas?

I can only say, I'm running my KT3 Ultra2 with XP 2800+ without any problem at 333 Mhz. Remember you have to upgrade Bios with ver 5.7 so Mobo can work with a 166 FSB. Also, better try starting with only one memory module. You can take a look at my P.S. specs. on my sig. It's not too good, but enough for this rig. So, don't dispose yet your 2500+, try and tell us how did it go.
A bit off: Do you like this Forum ? If yes, Read the post on first page in this Forum " Forum Team on Strike...". If you want this Forum to stay as it is now, please send a mail to MSI. Adress is mentioned in first post.

Need help with ATI R9600PRO in MSI KT3 Ultra2

I just got ATI R9600PRO but can't make it work with my KT3 Ultra2 MB, I did up grade Bios, etc but still didn't work , anyone can help?
- AMD XP 2000
- MSI KT3 ULTRA2
- Apacer 256 mb(memory)
- OS Windows XP Pro
- Bios 5.7

Quote from: chiochio on 21-November-05, 20:20:31
When I plugged in ATI R9600 Pro, My monitor was blank. PSU? sorry newbie .
Power Supply details..
try set AGP Vcore to 1.6

Installing wireless router, router works fine but can't configure the modem

I'm configuring a wireless network for my parents, and I can't seem to get it set up right on my parents desktop with Windows XP SP2.
I bought a Linksys wireless router (WRT54GT) to set up a home network, and set that up quickly. It's not having any problems, but I can't set the modem into bridge mode. I'm connecting to DSL using a Westell Wirespeed modem (C90-36R516-01) that is pretty old, but I don't see why there is a problem. I went to the IP 192.168.1.1 in my browser while connected to only the modem to configure it, but the server always times out. When I plug in the router, it goes easily to the Linksys' configuration panel.
The only thing I can think of it that I configured the router before switching to bridge mode.
I tried getting around this problem by configuring the router to dial Verizon automatically using PPoE, but I don't know if it's actually working correctly, and it still asks me to dial up when I start Firefox. Other computers on the network see the router, but don't connect to the internet.

One thing you should do is get rid of that Westell modem from verizon. Its junk. I replaced it with a DLink DSL modem and internet is faster. Not that this suggestion solves your problem.

Can I install Panther & OS 9.2.1 on a Firewire partition?

From reading other posts, it seems that Panther/Classic can be installed on a partitioned Firewire drive. Not quite sure how do do that as other posts were about different issues.
Info
There's a G3 beige tower that there is no space for, but I'd like to run some of its apps, files and games on a Firewire drive on the iMac. There are backups for all the G3 data on CDs, and on 135MB removable drives. There were 2 HDs in the G3. The HD running 9.2.1 died; the other is running OS 7.1. The machine boots from the 9.2.1 CD, but not from Panther.
Questions:
1. One can never have too much backup, so will partitioning the Firewire drive leave enough free space after Panther and Classic are installed? *see # 2
2. I assume it's better to use Panther rather than Tiger, as it's a smaller OS. The Firewire drive has 65GB capacity, with 44GB used for a Leopard 10.5.8 backup. About 20GB is available. And best to leave at least 10-20% of that space free.
3. Would an 8GB flash memory stick work to backup Panther and 9.2.1, as well as apps, files, etc.? Nothing is large on the G3--would not need about 70% of the software that was originally installed on it (printer, scanner, browsers, modem, etc.)
Is this a workable idea?
Thanks!
G

Hi G, The floods are in the north and I live in the south so everything is good here, but it seems half the world is either flooded or snowbound.
The La Nina effect in the Pacific is one explanation for the Australian deluge. Whether the extensive snow in the northern hemisphere is related, I'd be guessing.
As to your ambition, maybe find someone with a working Panther OS and clone it to an external with SuperDuper, and see if that works for you. As I've said, I have my doubts and think preserving your old hardware is perhaps the most straightforward thing to do.
If your old G3 is taking up space, maybe acquire an old laptop just for the purpose.
Every so often I fire up my iBook, so as to run an old app under Classic.

Want a Help page on installing Fax Modem and how to use it.

I have bought the Apple USB fax Modem.
But I have been unable to find instructions on:
1) installing the modem,
2) setting up the modem
3) configuration of software that drives the modem, cover sheets etc.
4) If I need to deactivate my Airport before using it
5) How to connect my cell by Bluetooth or tether to send/receive Faxes
Now I know that you use the print to PDF Fax,
But I have sent several faxes and never found a prompt that says they made it or failed.
Does anyone know where I can find this info??
Thanks
Dunc
I have a MBP 2.4, 4 gigs

1) installing the modem,
Plug it in
2) setting up the modem
If you want to use it for connecting to dial-up you would do this in Network Preferences, where you would enter the number, username and password, but I guess this isn't what you want to do as you have Airport.
3) configuration of software that drives the modem, cover sheets etc.
To send a fax, choose 'Fax PDF' from the Print dialog. You set up the telephone number and whether you want a cover sheet there.
4) If I need to deactivate my Airport before using it
Not to send a fax
5) How to connect my cell by Bluetooth or tether to send/receive Faxes
I'll have to pass on that, I don't have a clever mobile phone. You might like to post it again as a separate question.
But I have sent several faxes and never found a prompt that says they made it or failed.
You don't get any progress report faxing this way.
If you are going to do a lot of faxing you might like to look at PageSender which offers many more features.

New DSL install for modem 12/31. Today my landline went dead (1/3/14)

Hi,
New DSL install for modem only12/31. Today my landline went dead after having a whistling noise. (1/3/14). I've checked service box. Exterior line is dead. How can I notify service?
Thanks,
cnewton
Richmond, VA, 23223

Hopefully you reached someone by now. Remember this forum is peer to peer and not really a way to contact Verizon.
Try this page http://www.verizon.com/Support/Residential/phone.htm
Or call using another phone 1-800-verizon

Nokia X6 Oviplayer can't install (Windows 7 ultima...

Windows 7 ultimate
2.8Ghz,1GB RAM.free HD > 50Gb.
I bought the NOKIA X6.
I downloaded and installed the Ovi suite (works very well).
I want to download music,from Nokia music store,i signed in
i have permission to download for 12 months!.
I MUST use & download first the OVI PLAYER!!!.
After downloading installing failed!!!
I can't use oviplayer,means i can't use the nokia music player?.
Can someone PLEASE help me to install it and make it work!!.
There is NO firewall,antivirusprogram,fireall from windows 7 which blocks installing!!!.
I log in username with admin rights!!!.
I noted this problem to NOKIA but no respons!!!.
I have the latest Firmware for the NOKIA X6..
Also i can't use from NOKIA X6 the Wifi for connecting with mine wireless Thomson 780 adsl modem!!.
The modem is working very well(tested)..
So i do have 2 problems with this NEW NOKIA X6 phone with 32GB for music:
1)Ovi player doe'sn't work windows Ultimate with enough free space?.
2)Wifi on the Phone says: WEB:no gateway!.
Please help me!!!...

Hello,
I maybe able to help you with your WIFI problem on your phone?
What security settings do you have set on your modem?
I have an N85, and my WIFI modem had WPA2 security which when connecting N85 through
seemed to have connected but it gave WEB:no gateway reply error
So I changed the security settings on the modem, removed it actually and set up MAC accessing to avoid unauthorized use.
So try changing the security settings on your modem to lower one like WEP or I would really prefer MAC filtering and all !
Hope this helps !
Oh and for Ovi Player same problem is with me, can't install on Windows 7 Ultimate

I can't install the wireless on Satellite L40-14B

I can't install the wireless on this laptop. Was bought new with no software on it.
i tried all the drivers from this site recommended by Toshiba partner : http://aps2.toshiba-tro.de/wlan/?page=downloads
Intel PRO/Wireless 2100
Intel PRO/Wireless 2200/2915
Intel PRO/Wireless 3945/4965
Atheros Wireless LAN Adapter
this is the image with the device that is not instaled .. the only device .. i hope this is the wireless if not .. where is wireless divices ???
http://www.findjobuk.com/wireless/test.jpg
this is the device information :
USB\VID_0BDA&PID_819&REV_0200
USB\VID_0BDA&PID_819
I don't know what to do else ,
If anyone can help me.
Thanks

i installed the driver but isn't work yet.
I change the net8187b.inf
this :
USB\VID_0BDA&PID_8187&REV_0200
USB\VID_0BDA&PID_8189
to :
USB\VID_0BDA&PID_8197&REV_0200
USB\VID_0BDA&PID_8197
the instalation works ... and say that everything is working ok but when i turn wireless capability on say that the repair but the problem persist.
So i think i need another driver .. have any suggestions ? :)
Thanks Pedro i know about that code .. i found in some specification for L40 , but i didn't find anything on the internet ...
Also this laptop didnt' any system on it .. this why was so cheap. But no cd on it ...
Component List Satellite L40, Satellite Pro L 40, Equium L 40
Contents and Installation order
for Windows VISTA
1 Windows Vista RTM
2 Intel(R) Chipset Software Installation Utility V8.2.0.1014 (logo'd)
3 Intel 945GM/940GML Display Driver V7.14.10.1244 (logo'd)
4 Synaptics Luxpad & TouchPad Driver V9.1.23.11 (logo'd)
5 ADI Audio Driver(ADI 1986A) V6.10.1.6140 (logo'd)
6 TOSHIBA Software Modem SM2177ALD03
7 Realtek 8100CL Lan Driver V6.103.126.2007 (logo'd)
8 Atheros Wirless LAN Driver (Foxconn) v7.2.0.164
9 Atheros WirelessLAN 802.11a/g.g Driver v7.2.0.164
10 Realtek Wireless Lan Driver 6.1082.504.2007(logo'd)
11 RICOH(R5C847) V3.51.01(logo'd)
12 ATK Hotkey driver V1043.2.31.100 (logo'd)
13 ATK Hotkey utility V1012
14 TOSHIBA Accessibility 1.39.0.15
15 TOSHIBA SD Utilities v1.8.1.1
16 TOSHIBA Assist v2.00.03(For Philly10 Eng)
17 TOSHIBA ConfigFree v7.00.28
18 TOSHIBA Speech System v1.00.2512
19 Toshiba Extended Tiles for Windows Mobility Center V1.01
20 CD/DVD Acoustic Silencer v2.01.01
21 TOSHIBA DVD PLAYER V1.00.21A
Message was edited by: marius pascariuc

Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

Check your Network control panel and turn off Auto-Proxy setting.
This is one of the top #4 "how can they do this' pet-peeve errors.
The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
If auto proxy isn't it, router/modem and DNS settings.

HT1178 Can I install Time Capsule strictly as a back-up to my local devices?

Can I install Time Capsule strictly as a back-up to my Windows laptop and Apple devices without using it as an Airport Extreme Base Station? I do not want to use my Time Capsule as my access to the Internet, just as a back-up. I have U-verse voice and data services and am using their wireless router to connect to the Internet.

You are asking multiple questions..
The setup of the TC can have a whole bunch of variations. If you followed the instructions to plug in by ethernet and turn off wireless, then all connection is via the uverse modem router.
TerrenceV wrote:
Thank you. Since I am not using my TC to connect to the Internet - I have U-verse, so I installed AT&T's wireless router - it was recommended that I put the TC into bridge mode and connect it to the router using the ethernet. Without wireless, how do I send my backups to the TC?
If you don't use wireless then you use ethernet.. it can be plugged into either the uverse router or the TC..makes no difference.
Should I disconnect the ethernet, re-establish wireless, and let all my Apple and Windows 7 devices use their active wireless connections to backup to the TC? If so, how do I direct the backups to TC? I have Airport installed on my Windows 7 primary computer. Again, thanks for the help.
Why do you want to use wireless if you have ethernet? Ethernet is much better and faster.
If ethernet is not available you can use wireless.. if you turned off wireless in the TC.. then all connections will be via the uverse .. TC .. nothing wrong with that.
If you leave the TC wireless on.. then you can connect to TC instead and use TC. That is also fine.. makes no difference .. use what works.
I think you need to play some more.. you questions show you are not understanding the fundamentals..
In bridge the TC is a dumb hard drive.. plus switch.. plus wireless AP.
Plugged into the uverse router.. it is like the uverse router now has more switch ports.. a secondary wireless AP and a hard disk.. they are effectively one unit. Any connection to uverse is connection to TC.. any connection to TC is connection to uverse..

How many computers can I install my Creative Cloud apps on?

You can install the apps available in Creative Cloud on your primary computer and one backup computer, as long as they are not running at the same time. You will have access to both the Mac OS and Windows versions, so if you have a Mac at home and a PC at work, for example, you can install your applications on both. See the product license agreements page for more information.
Read more in the Creative Cloud FAQ

Jeff,
Here is a concern I have. I called sales support yesterday and asked the following questions.   I have 3 computers (1) PC tower, (1) iMac and (1) MacBook Pro.   When I first started using Adobe all the way through CS5 Master Collection I always owned the Windows Box Versions. I have been waiting for months for this to come out so I could move my workflow over to MacOS X.    Since the Creative Cloud supports both MAC and Windows installs the question I asked was can I install it on both my 2 Mac Computers. Then if I need to use it on my PC can I simply deactivate and then activate on it for use?
The answer your support person gave was "YES" So the answer in this topic don't even flow with the answers from calling the 800 number!
So now reading this forum topic I am really confused.   I like many others have definate reasons why I may want to flip flop the machine I am using the software on (1) I have $4500 worth of AE plug-ins. $2000 worth of these are platform specific. So they only run on a windows machine. Even, though I intend on my primary workflow to be used on a MAC there may come a time when I need to use one of these plug-ins and then would have to switch my activation to the PC to use it.
Another scenario, Let's face it Apple has not been to keen on upgrading the Mac Pro system's. iMac's are great but have their limitations with graphics cards, drives, and memory. So if you go a complicated AE render to do,iIt makes a lot more sense to run it on a PC at this time for me. So my hope here is I would de-activate one of my MAC's activate my PC then render away.
I like many others completely understand that we are only suppose to operate our software on 1 machine at a time. I am cool with you checking this. Other posters have asked what if I forget to turn one machine off leave with my MacBook Pro and then fire it up. Will I be in trouble? Not sure how you handle this if you don't have a connection. But Spotify the music streaming company license their software to me the user. If I fire up one machine, Then grab my iPhone and try to listen it turns it off on the other machine. Apps in the app store like MotionX Drive do the same thing.
I am an Electrical Automation Engineer by day and a Graphic/Video Designer Enthusiast at night.   In all the programming software that every vendor provides they provide a licensing server software service that sits locally within the location. It manages concurrent licenses, without the need for online connections. Any computer needing to run simply pulls the license from the network connected license server software service. When the program is done it releases the license. The only issues with this is if your license server crashes. It can be a bit of a headache with support to get your license back.   Others simply have an online site (like Apple) Where you simply log in and de-activate devices as needed. (Heck even Hulu, and Netflix offer this.)
I think if Adobe wants the Cloud thing to take off then they need to re-evaluate this. The license needs to follow the user not the device. The user should have a painless simple way to activate and de-activate their license back to their Adobe ID.

HT4722 How many computers can you install Final Cut on

How many computers can you install Final Cut on with one license or purchase?

This is an excerpt from the FCPX license, available here.
http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
2. Permitted License Uses and Restrictions.
A. Mac App Store License. Subject to the terms and conditions of this License and as permitted by the Mac App Store Product Usage Rules set forth in the App Store Terms and Conditions (http:// www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non- exclusive license:
to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
(ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library.

Can't install a modem on my KT3 Ultra2

Similar Messages

Maybe you are looking for