Can't install a video card

Built a PC w/KT6 delta mb a week ago. Have been unable to successfully install a video card. Tried ATI 9600SE first. Took that back and got a Diamond S90 w GeForce FX 5200 123 8xAGP. Loaded new chipset drivers and used up to date NVidea drivers. Screen goes blackafter Windows 98 intro screen. Any ideas? I've reinstalled WIN98SE 5 3 times.....no luck.

I had the same problem with new video card in Win XP (and I think this may apply to Win 98 also). I am using a KM2M board with built in video.
After installing drivers for new video card, boot into windows with monitor still attached to built in port. Go to Display Properties (Where you setup screeensavers, etc.) and go to Settings. Set Windows to use your new video card by default and Apply. Screen should go blank. Move monitor cable to new card video port and Windows will return. Set resolution, etc. to desired levels.
P.S. Wonka needs to just tell everyone to get a 400 watt or better PS to solve all problems. Then we poor wogs won't be chastised every day about PS specs.

Similar Messages

Installing a video card

what is the right order to install new video card ?? is it like this :
install
1. AGP SIS DRIVER
2. original software from VIDEOCARD CD
3. install directX
4. install DETONATOR

This is what I would do for 98.
Uninstall the device and drivers and reboot. let 98 install the standard VGA drivers after the restart.
Run the Detonator Destroyer found at Guru3d.
Shutdown replace old vid card with new and restart, then install the detonators recommended for the new card.
As far as direct x I do not know what version you have but youy can do that before or after.

Can you install a SIM card in a iPad model MD510B/AR

Can you install a SIM card in a iPad model MD510B/AR

Nope this appears to be a WiFi model only if my information is correct. If you have the device to hand then check it for a SIM card tray. With the Home key at the bottom the SIM card try if available will be in the top-left corner.
Regards,
Steve

Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics

Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics and if i can where
can i find a graphics card that will install in that computer.

There are many MANY threads on this, the answer is that it's not worth your time since you have to have a replacement card that the HP system BIOS already likes,, and this is not the same as replacing anything in a desktop, this is the equivalent of replacing the graphics in a laptop.
Since the graphics cards are not considered a user upgradable component there are no lists of "approved cards" nor guides to doing it, the closest you could do is the service or recycling disassembly sheets.

How can i make my video card and sounds work on Windows 7 on my Macbook Pro 2.2? Help please...

How can i make my video card and sounds work on Windows 7 on my Macbook Pro 2.2? Help please...

i lost my Mac OSX dvd...

Not install the video card driver

Please help solve the problem, HP Pavilion dv6 6051-er Why not install the video card driver or a video card is burned? When I install a video card driver Radeon (TMM) HD 6770 in a few seconds during the installation screen is black and so is, download the drivers from multiple sites from off site and others, please: help solve the problem.

that´s a strange problem.
Maybe the agp-slot somehow is faulty since you ran into problems with booth cards.
Have you visually check mainboard for any signs of bad capacitors, agp slot interface etc.
PS, seems like you do the driver install about the same order as me
- Win XP + all updates
- DirectX
- Inf driver
- Vga driver
- rest......
If the problems occured on a regulary basis when playing games etc, then it could be some heatingproblems or to weak psu, but that don´t seems to be the problem for you.

Can anyone recommend a video card for a stock Acer Aspire X AXC-605-UR11?

Can anyone recommend a video card for an Acer Aspire X AXC-605-UR11 with stock 220 watt Power Supply?

Hi Shaun, here's some video card choices, but check which Mac Pro they work on, might even ask OWC for Motion details...
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity|1&Ne=5000&N=7418&Ntt=video+cards

How can you test the video card?

I just got a cinema display and I am having trouble calibrating it.
I just notice that when I open up bridge CS4 it takes awhile for it to refresh. When I go to film strip view and click on a picture it will not diplay it.
Then I change views and there is a line down the middle of the display where it gets update but the left side does not.
Any thoughts on what it could be?
Video card of is it the monitor?
How can I test it?

The only ways I can think of to test the card are XBench and the Apple Hardware Tests (insert Install DVD and restart while holding down 'd')

Can I upgrade the video card in my 2009 iMac with the new ATI 2 GB VRAM card?

I am looking for more video RAM for video, CGI and animation work in Blender.
I may purchase Final Cut Pro X in the near future and I need to make sure there is enough video RAM to be able to work with this version of FInal Cut.
I, currently, use Final Cut 4 Express and though this runs fine, through Rosetta, on my current setup, I fear this much newer version may need more graphics power than I have, now.
I, also noticed some lag when working with Blender.
No where near as much graphics or video/animation lag as when I using Blender on my old G4m but it's still slightly noticeable.
I realize I may have to install this myself.
Can I purchase, somewhere, Apple's 1 or 2 GB ATI card seperately or from a third party vendor and install, myself.
I have seen posts that tell that the 27 inch iMac has a removable video card and is not soldered to the logic board like in the 21 inch models.
If true, is there a complete procedure for the iMac breakdown, installation of the video card and reassembly procedure?
My iMac only has the stock 256 MB VRAM graphics card.
If the take down looks more difficult than I feel I can attempt, I have an Apple authorized reseller, repair facilty here, in my area.
Could I purchase the card and have them install it for a fee?
ThanX for all of the info and advice, in advance
Michel

You will need to check if your model originally was offered with a custom build option that included a different graphics card. If so, you may be able to have it done; here is a fellow who managed to do it on a 2011 iMac (graphics card not soldered) and the model originally offered a better card option:
https://discussions.apple.com/message/18919734#18919734
Is this yours:
http://everymac.com/systems/apple/imac/specs/imac-core-2-duo-3.06-27-inch-alumin um-late-2009-specs.html
In particular, click on the link in this section of the specs:
I'd check either with Apple and/or an AASP to see if it can be done with yours or if yours is one of those where it is part of the Logic Board/soldered to it.

MS-6714 trying to install new video card

Well, I have done everything I can think of short of sledgehammering my computer into oblivion. Just bought this comp it is a 2.8 celeron using the 6714. Thought I could just stick a new video card in. It recogzines the video card, but will not use it. Even when I disable the on board through the device manager. It just uses generic vga drivers. Any clue how I can get this card to be used?

Hi,
Which 6714 are you using???
Check link:
http://www.msi.com.tw/program/search/ser/SerConProRes.php?keyword=6714&kind=1
Also,
1)have you disabled the ONBOARD graphics in the BIOS???
2)which video card you trying to install and which version of drivers?
3)what PSU do you have and model number?
Every single piece of info you give, shortens the answer/solution time...
Del

Just installed Blackmagic Video card now I have no BUILT IN audio

Hey all, I just bought a video card today. Blackmagic SP. I installed it, downloaded the driver. my problem is this, I just want to here the BUILT IN audio from Mac. I dont need the card at this point. However, in preferences, when selected, I cant here any audio for BUILT IN audio.
I don't know the answer on this one.
Any help appreciated

I just want to here the BUILT IN audio from Mac.
Do you mean while working with FCP or did it shut down the audio of all applications?
...However, in preferences, when selected, I cant here any audio for BUILT IN audio.
So there are 2 places to toggle.
In your mac's Systen Preferences > SOUND > Output you can select where audio from all your applications go.
In FCP: Menu > View > Audio Playback you can select your audio output (default is Follow Video. So when your video output is the Blackmagic, your audio will automatically be also). Set this to Built in. Be aware though that when your video is soming out of the Blackmagic and the audio from Built in, that the audio will be off sync.
Rienk

Trouble installing new video card

I have a HP Pavilion a6720y Desktop which operates with Windows Vista 64-bit, and I had uninstalled the drivers on my current video card and powered down and opened up my computer, however I could not find a graphics card anywhere in my computer, the PCI slot was empty. So I put in the new card and when I tried turning on the computer again the monitor would not display anything as if the computer were off, when it was clearly on. Can anyone tell me what to do and where exactly the old video card is so I can remove it, If I can remove it.

Hi:
Below is the link to the product specs for your PC.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01643511&tmp_task=prodinfoCategory&cc=us&dlc=en...
There is no add-on video card (one you can remove).
The video on your PC is a GPU chip integrated onto the motherboard.
You may have to connect the monitor cable back to the onboard (old) video input, and go into the BIOS, and look for a setting to either disable the onboard video, or enable the PCIe/PCI video, or set it as the primary video controller.
I don't have your model PC, so I don't know what BIOS settings it has.
Not all PC's automatically disable the onboard video chip when an add on video card is installed.
If there are no video settings then one of two things is possible:
1. You inadvertently hooked the monitor back up to the old video port (I've done that before).
2. Your video card is defective or incompatible with your PC (may draw too much power, or be too high a PCIe version like 2.1).
Paul

K9N2 Diamond no video after installing second video card

Hey everyone , I hate to sound desperate but I Need Help fast Please!! I have a lot of work to do on this system tomorrow , I really do not want to use this old PC I am on now.
First off let me say that I have had this board for about a month (maybe longer) and besides a slight power down issue it has been Rock solid and runs everything.
but my problem started tonight when I went to install a second video card that I bought , I had a 9600GT as a second card but it never made it into this build because my kids needed a video card for their PC so pay no attention to the 9600GT in my system config list. Again I have only ever had a single GTX260 installed in this system.
but I finally got an 8600GT (for PhysX only) and installed it tonight after downloading a driver form Nvidia , system was working fine , but after installing my 8600GT in the second PCI-e slot I powered up to NO VIDEO , so I figured I would have to reset CMOS to set the video cards or something so I powered down tried resetting that and restarted , still NO video.
So I removed the 8600GT PhysX card and restarted again and still NO video , so I tried the onboard VGA plug and still NO video.
I then tried to remove the battery , reset the CMOS (no power to the computer at all) and put everything back and still NO video!!
I must say I am at a loss here , shouldn't the "Clear CMOS" button actually clear the CMOS and boot the PC to default settings?? I simply do not understand this problem. what can I be doing wrong?
Things I have Tried:
all video ports Including onboard
Clearing the CMOS by holding down the button for 30 seconds several times
Removed the battery and pressed the Clear CMOS
Removed 1 stick of RAM
Video card in different slots
Powering on and off several times
PS: My 4 green lights are now from the top when they were al green before:
Green
Green
Red
Green
Please thank you for any help

Quote from: Henry on 04-June-09, 13:51:11
Looks like time to take it all out of the case and give things a test run on the table top. Take it all apart down to the bare MB and start from scratch and see what happens.
Thanks for the reply Henry , I can try that as my motherboard tray comes out easily but I have a question , what is this supposed to accomplish? if this motherboard won't run in my case its useless to me. I think what I am going to try first though is a 9850 BE CPU to eliminate a bad CPU , and I must get the info off my HDD as it did not complete a backup last night due to this video thing , that is my main concern right now. I have had this case for 2.5 years and hav had 2 ASUS motherboards in it , it is very well grounded/proven. But I will try anything.
Quote from: Bas on 04-June-09, 14:09:16
Try with 1 strick of memory in the slot next to the cpu.
Thanks for the reply Bas , I already tried that last night and it did not work , I also tried 2 different video cards in ALL PCI-e slots and a single RAM chip in slot #2.
NOTE to BAS , your suggestion to turn off the WOL setting on my 2 nic cards in another thread worked all day for me yesterday , thank you for that suggestion.
Is there ANY other way to clear the CMOS other than with the push button and the battery out?
thanks guys , I'll try another CPU tonight and see if that works , if not I will try to RMA or just junk the board as if I cannot get it to post its useless.

I've got a Mac Book Pro 17" 2008 with FCS 2. Compressor 3 only gives me MOV-1 which are no use so I've bought Compressor 4 from the App store: it says the graphic card is not compatible. Can I install a new card on my mbp? If so which is best? Thanks John

I've got a 17" Mac Book Pro with Snow Leopard and Final Cut Studio 2 . Compressor 3 is only giving MOV-1 which are no use to me. So I've bought Compressor 4 from the App store which it says isn't compatible with the graphics card on my 2008 mbp. Can I
Install a new graphics card on my computer if so which one? If not can I solve the MOV-1 problem ?
Thanks in anticipation
John Lawrence

Ask here:
https://discussions.apple.com/community/professional_applications/final_cut_stud io

Can I install a graphics card on Satellite M70?

I have got a Toshiba Satellite M70-394 (psm70e). I have seen that I have a pcie slot in my system through a hardware identifier program. Is it possible that I can install a graphics card through the back if I unscrew the back or get a professional to do it?

Hi!
> an express card slot.
Do you know what an express card slot is?
I think you are mixing something
The express card slot is designed for express cards. Its similar to PCMCIA cards.
You will not find a graphic card that is designed for the express card slot. For these slot you can buy USB extension cards for example.
Check your user manual!!!
There you will find more details about this slot.
Bye

Can't install a video card

Similar Messages

Maybe you are looking for