Can't install Acrobat form cs6 diskete: I get this error: Exit Code: 6 - ARKSelector.dylib not found at /Library/Application Support/Adobe/DECor
How an I get around this error when I try to install Acrobat form CS-6 Design & Web Premium CD on my Mac air?
Exit Code: 6 - ARKSelector.dylib not found at /Library/Application Support/Adobe/DECor
HELP!
Errors "Exit Code: 6," "Exit Code: 7"
Mylenium
Similar Messages
-
i can't install icloud on my pc i get this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'.this could indicate a network error, an error reading from the CD-ROM, or a problem with this package! please help!!!!!
“the procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.”
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
I can't download Lightroom for some reason. I keep getting this error:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.4.0.0 Adobe Photoshop Lightroom 5.pkg_5.4 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/ -
Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
ThanksThanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying. -
I installed LR CC , but when i try launching it flashes & it is gone. I tried the solution in the Adobe Site - which says search for the folder Library/Application Support/ Adobe/ Sl Store ...., but i can't seem to find the SL Store or SLCache folders ( i use the Mac). Only then can i apply the solution. I just cant seem to find the folder in the first place
That did not work for me & as per adobe site help if signing out does not help- we are supposed to go the above folders & do some additional steps, but i could not find the folders & hence the question
-
After updating to 10.9.2 the Finder changed and I feel something is hiding - for example, I no longer seem to be able to "GET INFO" about my hardrive... only my drive and "my documents" etc... maybe this has something to do with not being able to find this folder: Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions
Jeff... Yes. I meant to mark this solved - found another thread recommending using FINDER-GO TO- and /Library/Application Support/Adobe/Bridge CC Extensions.
It worked easy.
That little bit of info would be a great addition to that install AOM instructions.
Thank you for asking! -
It says this when I try to open iTunes:
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
Error 2
I've tried uninstalling it and installing it several times. I've tried to download Apple Application Support separately but it just says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4... Please refer to Help and Support for more information. HRESULT:0x800736FDYou have missing information in your Windows programming.
You need to repair your computer so it can run iTunes. If you plug those error codes into your browser you may get an answer. -
Hi, I was running itunes software just fine. I got some malware and unintalled everything that was from apple. Now, I reinstalled itunes but can't run it because I get the msg "Apple application support was not found. Apple application support is required to run itunes. Error msg 2.
What can I do to fix this?
Thank you.With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update
I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally. -
When I try to access Itunes Icon on my dell computer I get an Apple application support was not found. Apple application support required to run Itunes, and say uninstall itunes, then install itunes again. It used to work. What do I do?
I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally. -
I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am not trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks
You want your user library
Mac(user)/Library/Application Support/Adobe/Camera Raw/Settings
In finder click on Go then hold down the Option key and then click on Library -
Install error on Mac "could not create ~/library/application support/adobe/coresync"
Any reason why this would be happening and what I should do?
I'm getting this same error after trying to install on my mac pro.
I see that the cloud installer was able to create the ~/Library/Application Support/Adobe folder and a bunch of folders in side that, but it complains
about not being able to create the CoreSync folder.
I ran into this, then uninstalled everything, and nuked the ~/Library/Application Support/Adobe folder completely and started over.
The installed created the Adobe folder and "AAMUpdaterInventory", "AdobeApplicationManager", "Extension Manager CC", OOBE, SLCache, SLStore, Vulcan
folders just fine. but it can't create the CoreSync folder in the same location.
I'm stuck. -
So when I plugged in my iPhone 4 (iOS 7.0.4), iTunes told me it needed to update to the newest version... so I did. After installing it it gave me an error (-45019) that said that a required component wasn't installed. I looked it up and people were saying to unistall iTunes and all apple related software and reinstall itunes which i did. I am on Windows 8.1.
Now it gives me this error. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please unistall iTunes and install iTunes again. Error 2 (Windows Error 2)." I did this and it gave me the same message... Please help! How do i get iTunes running again?Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes
Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
Cannot install ITunes--Mesage is "Apple Application Support was not found. Apple application Support is required to run ITunes Helper. Please uninstall ITunes, then install ITunes again. Error 2 (Windows Error 2)
See Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
when i click on creative cloud it opens the has a white screen and a load symbol and loads and does that forever
-
Looping flash intro in IE7 not IE6
Hey all, I have a pretty simple site that utilizes flash streaming video via .flv files. These swfs have a small intro with my company logo and the video title in the beginning and then the video plays after the intro is finished. In IE6 this works g
-
Unable to set sga_max_size parameter through spfile
My 10g db running in spfile. I am trying to decrease sga_max_size to 1024M where i have 1504 now ... Do i am not doing in a right way ? Please suggest me i am trying like this ..... SQL> sho parameter sga NAME TYPE VALUE lock_sga boolean FALSE pre_pa
-
Hi guys... I'm trying to show a TableView in HTMLB, but I get the following execption : I debugged the JSPDynpage and I do get the data succesfully from the data base. I think the problem is when the tableview tries to get the model. I am not sure, b
-
OS 9 stops working on OS 10.3.9
In a lab of iMac G5s, a certain OS9 CD seems to be breaking the 9 Systems. After using it, the SF no longer is blessed. Tried dumping the whole folder, then reinstalling from original disks, but still not a healthy SysFdr. Is there another way to Cle