Can't install adobe flash and how I solved the problem

This will sound crazy, but I was desperate. And then it worked, on the Air and on my Pseudo-Husband's new MacBook Pro.
I changed the download folder to Applications. (Just for this one download. I've since changed it back to Desktop which works best for me.)
In Applications, it installed fully, and works fine. I have no idea why, as I'm not a trained person on these things. But it seemed like a good idea to try. (Macs for 20 years.)
Try it! I have no idea if it will work for you, but it did for us. Goo

When the Flash installer reports that Safari and System Preferences need to be closed to continue it gives you the option of closing them from the panel.
If you select the action to close them what happens?

Similar Messages

  • Unwanted signals going through RS-232 port when Analog I/O channels are being used. Why and how to solve the problem?

    My application involves operating a pH meter via RS-232 protocol. Other hardware are operated using an E-series DAQ board whereby waveforms are software-generated and sent to the relevant hardware using an Analog Output channel. Data acquisition is performed utilising Analog Input channels of the DAQ card that have been configured in a Referenced Single-Ended mode. When the Analog I/O channels are active erroneous readings are observed on the pH meter if the RS-232 cable is connected between the pH meter and the control PC. No problem is observed if the RS-232 cable is disconnected. What could be the problem and any suggestions on how to solve this.

    Comments to your questions:
    Built-in = Originally supplied on the PC's motherboard
    1)I use built-in RS-232 interface
    2)I use built-in Bus type
    3)The RS-232 cable is shield connected
    4) I'm not sure on how to check if the RS-232's digital ground signal is connected. I simply connected the RS-232 cable from the pH meter to the serial port. The serial communication works fine, with no disturbance to the pH meter if i don't initiate data acquisition.

  • What cause my phone to be stuck at the apple logo and how to solve the problem

    help me

    If its on that logo, you can try restoring it via recovery mode
    1.Turn off the iPhone, if you can't turn it off due to a lack of response to input, just let the battery drain completly
    2. Turn on iTunes on your COMPUTER, dont go to apple.com/itunes, actually open the program.
    3. First holding down the home button on the front of the phone, plug the phone into the computer
    4. This will do two things. On the phone it should show a usb cable pointing to the iTunes logo, youll know you did it right if you see that. On the computer it will show in itunes that it has detected a device in recovery mode, and that it needs to be restored. Once you see that, hit ok on that, and hit the restore button that should be available on the screen. Once this is done your device should work. If it doesnt take down the error number it gives you and call apple.
    Keep in mind, that doing this means losing all your data, before you do this, at least try to sync with iTunes and make a backup, though if its frozen it very well may not.
    Hope this helps, cheers

  • How can I install adobe flash player on my iPod mini.

    How can i install adobe flash player on my Ipad mini?

    Adobe has not made a version of Flash for the iPad.
    Kappy explains why. https://discussions.apple.com/message/19446567#19446567
    5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/
     Cheers, Tom

  • How can I install Adobe Flash Player on my Mac/Yosemite?

    How can I install Adobe Flash Player on my Mac Pro/Yosemite?

    Zoeykm wrote:
    How can I install Adobe Flash Player on my Mac Pro/Yosemite?
    Download the DMG installer from Adobe here and run it.

  • How can I install adobe flash for my iPad 2

    How can I install adobe flash for my iPad 2

    Search before posting please.  This question has been asked and discussed over and over and over and over and over and over again.
    You can't.  Adobe doesn't make a version of Flash for iOS.

  • How can I install Adobe Flash Media live encoder on a G5 power pc?

    How can I install Adobe Flash Media live encoder on a G5 power pc?

    Unfortunately, you can't.  When FMLE was initially released in 2007, Apple had already transitioned to using Intel processors in their computers.  Your PowerPC processor isn't compatible with software written for an Intel processor.  From Adobe's website, the (5 year-old) FMLE v. 3.2 has these system hardware requirements for the Apple platform:
    • 2 GHz Intel Core 2 Duo or faster processor
    • Mac OS X v10.5.6
    • 1GB of RAM
    • 50MB of available hard-disk space (excludes archived FLV and F4V files)
    • 1024x768 screen resolution
    • QuickTime compatible audio/video capture devices
    • QuickTime 7 software or later

  • Can't install Adobe flash cuz  I don't know how to close   "system preferences"

    CAN'T INSTALL   ADOBE  FLASH PLAYER  CUZ  I  DON'T KNOW HOW TO CLOSE  SYSTEM PREFERENCES  ON MY  MAC  !!!

    Open your Linux distribution's package manager and install Flash Player from there.
    * https://help.ubuntu.com/community/RestrictedFormats/Flash
    The following support article lists alternative installation methods.
    * [[Install the Flash plugin to view videos, animations and games]]
    If you continue having problems, please describe exactly what steps you've taken and what went wrong (error messages, if any).

  • How can I install adobe flash on my firefox when it keeps opening automatically in Chrome?

    How can I install adobe flash on my firefox when it keeps opening automatically in Chrome?

    Flash Player Plug-in (All other browsers)
    That's the installer, regardless of what browser you download it with.

  • Browser out of date and can't install Adobe Flash Player

    My browser is out of date according to everything I am visiting.  I can't post pictures on twitter, some of the videos I watch have blocked plug-ins, and I can't install adobe flash player.  My computer is a MacBook Pro 10.6.4, and I would like to keep Safari.  Can someone direct me to where I get the newest version of Safari and why I cannot install Adobe Flash Player.  I have installed, uninstalled, and done everything I know to do to get this problem resolved.  Next step is take it to the Apple store as I am not a tech person.  Thanks for any assistance.

    Upgrade to Snow Leopard 10.6.8: Mac OS X 10.6.8 Update Combo v1.1. Upgrade further:
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite - System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • How can I install adobe flash player when it is not supported by my galaxy notebook?

    How can I install adobe flash player when it is not supported by my samsung galaxy notebook?

    Please see this page for a list of all certified devices:
    Flash Player Certified Devices
    If your device is supported, this FAQ will walk you through the process of manually installing the plugin:
    How do I manually install Flash Player on my Android device?

  • Can't install adobe flash player on macbook pro

    Can't install adobe flash player on macbook pro. Installation file automatically runs through Matlab as a default program. What to do?

    I have this version installed on my MacBook Pro.  3.3.7.0 (3.3.7.0) I am using Lion OS X 10.8.4.
    I have followed the instructions from the Adobe site, The installation process completes. I click "FInish"
    I get taken to the Adobe website, http://get.adobe.com/flashplayer/completion/aih/?exitcode=0&type=install where I am told the installation is complete.
    I restart the computere just in case, go to YOuTube and blam. You need the latest version of Flash Player error shows up again to complete my frustrating loop.
    Under Applications on my Hard Drive, I have: AdobeFlashPlayerInstaller_11_ltrosxd_aaa_aih.dmg
    When I look at my downloads folder, I find Wccb63Gg.dmg.part
    I don't know what to do. I don't seem to have the same file name as others on this site for the download. and I can't find it anywhere.
    Thanks to anyone who can help.
    Ahulani

  • I can't install adobe flash player update on my macbook pro. Goes to " Device" lather then download

    I can't install adobe flash player update to my macbook pro. Download to " device" lather then " download" When I click device for Adobe flash player, it won't finish installing. I am so done with this update. When I watch youtube, keep popping up " out to date flash player message . Please help me…...

      1. Save downloaded files to "Downloads" folder.
          Safari > Preferences > General
          Save downloaded files to:
          Select "Downloads".
    2. System Preferences >  Flash Player > Advanced >  Delete  All
        Press the "Delete All" button.
        Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
         Follow the prompts and install the Flash Player.

  • Can't install Adobe Flash Player, can't install Adobe Flash Player, can't install Adobe Flash Player

    For some reason I can't install Adobe Flash Player.

    This is a community forum focused on MacBook Pro Hardware.  Adobe publishes Flash, and they are the ones who would be best to contact about these issues.  Here's some info from the Adobe website:
    http://kb2.adobe.com/cps/908/cpsid_90893.html

  • Can't install adobe flash player update

    can't install adobe flash player update for my windows tablet

      1. Save downloaded files to "Downloads" folder.
          Safari > Preferences > General
          Save downloaded files to:
          Select "Downloads".
    2. System Preferences >  Flash Player > Advanced >  Delete  All
        Press the "Delete All" button.
        Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
         Follow the prompts and install the Flash Player.

Maybe you are looking for

  • Windows 8.1 Devices and Printers Issues

    We have deployed a brand new Active Directory domain for a customer. ALL the servers without exception are Windows 2012 R2 and all clients are Windows 8.1 32bit VDI clients. The issue that we have is around network printers.  We are deploying 4 print

  • KFs in BPC

    Hi Folks: As you know, the objects configured in BPC automatically generate Objects in BW. (e.g.) Master Data: 1.-  Dimension & Dimension Members in BPC  >>>>>>Characteristics & Values  in BW (Ok) My cuestion is in case of Transaccional Data: 2.- No

  • Airport Network?

    Hi All Hopefully someone can put me straight and unconfuse me. I am looking to create a wireless network using my G5 1.8 upstairs, linking to my hifi downstairs. I know I will need and extreme card for the mac and an Express Base station with Airtune

  • New attribute added in BO, but not reflecting in WF container

    Hi Experts,     Purchase req overall release  workflow was using a z business object in my requirment, now i have needed some enhancements so i made some changes like i added few attributes in BO. then i did the delegation. but the new attributes are

  • Report server trace or debug

    HI Team, How to enable trace or debug mode for report server 6i in Oralce apps11.5.10.2? My iuuse is: We are using quoting module . The user is running reports through report server. The user is unable to run report through report server. he edited t