Can't install airport express
Have a new intel imac running OS X 10.5.2. I've established a wireless network using built-in wireless cards to my powerbook G4 running OS x 10.3.9. This network runs fine, but I'm trying to extend the range of the network using an airport express to make a wireless distribution system (WDS). When I plug the airport express in it flashes amber as expected, but when I run the airport utility on the iMac the airport express is not found. What's wrong?
If I follow correctly - you are using your iMac to create a wireless network? In other words, you are not using an Airport Base Station but instead you are using your iMac to do this job, correct?
If so, you cannot create a WDS. Main and remote base stations in a WDS must be Airport Extreme Base Stations (any model) or Airport Express devices. You cannot use a Mac as one of the base stations.
Similar Messages
-
How can i install airport express A 1264 on os x 10.9.2
How can i install Airport Express A 1264 on os x 10.9.2
Hello chawich
All you should need is Airport Utility that is located in the Utilities folder that sits in the Application folder. If you have an iOS device, you can also set it up with that device with Airport Utility or in Wi-Fi section in Settings.
AirPort Utility software and firmware downloads
https://support.apple.com/kb/HT1998
Regards,
-Norm G. -
Can't install AirPort Express Software
Help!
Trying to install AirPort Express Software in my computer. It's an iMac 1.25 GHz PowerPC G4. It was installed with OS X 10.3 with updates through 10.3.9. I recently installed Leopard 10.5 and it is now updated to version 10.5.1. But, when I try to install the software for my new AirPort Express, it says "you cannot install AirPort on this volume. The version of Mac OS X on this volume is not supported." Huh? AirPort express says it can be used by computers working on OS X 10.4 or later. What might be my problem? THANKS!
TerryDuane,
Thank you for your speedy response!!!!
When I open the AirPort Utility.app, a window opens called AirPort Utility, the twirly/stopwatch icon goes into motion next to the words"Discovering Base Stations." After this happens for some seconds, these words appear...
"AirPort Utility was unable to find any AirPort base stations. Please make sure the AirPort base station you want to set up is plugged in and in range of your computer, and then click rescan to try again."
My express is plugged in five feet from my computer. What to do....?
Many thanks!
Terry -
Can't install AirPort Express Assistant because I already have Utilities
Just having some annoying trouble here.
I have a MacBook Pro that came installed with AirPort Utilities, and it has the latest version.
I bought an AirPort Express so I could stream music to my speakers with AirTunes. I'm not hooking an ethernet cable to the airport, because my wireless already works fine in my house.
I need to install AirPort Express Assistant in order to set up the network between the express and my computer, but I can't even use the CD it came with because once I get to the part to select where I want to save it, it says "this computer already has a more recent version of AirPort on it etc..." However, I only have Utilities, not the assistant.
With the Express plugged in, I go to Utilities and it doesn't pick anything up, which makes sense. So basically, what can I do?
I tried deleting Utilities off my computer so I could just install the whole CD but even that did nothing.
Thanks.Your version of Snow Leopard already had the latest version of AirPort Utility 5.5.1, which is the version that you should use to configure the AirPort Express.
The disk which came with the AirPort Express was produced some time ago and the version of AirPort Utility on the disk is out of date.
Not sure what you mean by Assistant. There is a guided setup process in AirPort Utility that is initiated when you click the Continue button. That may be what you are thinking of.
You made a mistake by deleting AirPort Utility 5.5.1 from your computer. You should download AirPort Utility 5.5.1 and install it so that you can configure your AirPort Express.
http://support.apple.com/kb/DL955 -
Can't install AirPort Express, and unit is flashing amber
Hi,
I've just bought an Airport Express unit, with the aim of playing iTunes remotely (I have a separate wireless connection to the net). I have two problems:
1) When I try to install the Airport Express software provided, the setup tells me that I have a later version of iTunes and cannot install Airport Express. Does that mean iTunes v7.0 (which I am using) already contains Airport Express?
2)My Airport Express unit is flashing amber. Resetting the unit makes no difference. I suspect this is due to the problem of 1) but am really stuck on how to progress!
many thanks in advance!
MikeDuane,
Thank you for your speedy response!!!!
When I open the AirPort Utility.app, a window opens called AirPort Utility, the twirly/stopwatch icon goes into motion next to the words"Discovering Base Stations." After this happens for some seconds, these words appear...
"AirPort Utility was unable to find any AirPort base stations. Please make sure the AirPort base station you want to set up is plugged in and in range of your computer, and then click rescan to try again."
My express is plugged in five feet from my computer. What to do....?
Many thanks!
Terry -
I can't install Airport Express on my Mac. It says "you cannot install Airport on this volume. The Version of Mac OSX on this volume is not supported" The Airport disc says 10.4 or higher is required and I'm running 10.5.6.
Mac OS X 10.5.6 includes the software for it. You don't need to and shouldn't install anything.
(41417) -
I have a Mac 10.6.8. Just installed Airport Express. I can't see any base stations. I did a hard reset on the Airport Express, turned off all devices, turned them back on. I see plenty of Airport networks in the neighborhood. How can I tell if I have a Mac problem or an Airport Express problem? Airport Express blinks Amber.
Obviously, I'm still using ethernet to be able to reply to this.
Alright, use the same ethernet cable to plug directly into the airport express. This will FORCE the airport utility to now see it regardless of weak signals & interference. You can set it up that way.
BTW, what is the original intent on the express? -
I have installed airport express on my Window 7 and had problem to find the airport express.
I solved the problem by turning off my AVG firewall and the airport tool found the airport express and it went steady green.
I then turned on the AVG firewall again and it continues ok.
But when I turn off and restarted my laptop I have to follow the same procedure.
The AVG firewall is set to All Allowed for the airport express.
Is there anybody out there that can give assistance to solve this problem?Hi,
I solved the problem myself by updating the Wi-fi driver.
Now it works perfect. -
I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.
What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?
-
Can't configure airport express with laptop after 10.5.6 update
I can't configure airport express with laptop after 10.5.6 update
the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
Other computer gets to the configuration screen without problem.
And the airport utility describes the airport express like this: syAP.802.11formatI downloaded the airport utility and re-installed
and the problem was solved -
Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise
If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting? -
New router now can't get airport express to work
Att installed a new wireless router.
Everything else seems to be fine but can't get airport Express to communicate with My MAC. Green light on airport device. Just downloaded OX on Mac recently.
Any suggestions would be appreciated!Reset the Express to factory and start over.. this is always required when you make major network changes.
-
Is there a way I can connect my airport express to ba able to air play to my speakers the audio from apple tv?
GEESAR wrote:
hi there
is there anyway i can use the unlimited data i have from my mobile network provider (o2) on this i pod touch 4 generation the latest model NO.
and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider NO
if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
geeeeesar also how does this ipod touch4 pick up the wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of. These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants. Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for.
thanks can i pod touch 4 generation download movies too please help thank u very much.... Yes. If your iPod has a WiFi connection and you have an account with a service like NetFlix.... -
Can you install logic express on more than one computer
can you install logic express on more than one computer ?
Be sure to read the End User Licensing Agreement for questions of this nature. You are allowed to install Logic on two computers that you own, for example an iMac and a MacBook Pro. You cannot, however, use the two computers at the same time if they are on the same network. You can use one computer as a Logic Node to shift some of the processing load (which you would likely do with an ethernet cable) but you don't need to have a full installation of Logic on the Node machine, just the Logic Node installation. The idea of allowing two installations is so that you might take advantage of a portable computer in the field for on-site recording then later transfer those files to a desktop studio set up for further editing.
-
Airport Utility can't find Airport Express after setting up as repeater station
I wanted to extend my 2Wire-based wireless network into a specific room that never seems to be able to pick up the signal, and found the following instructions on how to do so on Apple's website:
(note: these instructions were submitted by another user in response to a question as to whether or not an Airport Express could be used as a repeater station for non-Airport Extreme-based wireless networks - linked here http://store.apple.com/us/question/answers/product/MB321LL/A?pqid=QY4CAJJC7KFTTD KYH72DKPXF4CAUA9D4J).
Yes, you can do this two ways: If you can connect your airport express to your router via ethernet, then you will perform the following steps in the airport utility:
1. Select your airport express.
2. Select manual set up.
3. Under Wireless, select Participate in a WDS network
4. Enter your network name, radio mode, channel, and security
5. Under WDS, select WDS main
6. Check wireless clients
7. Add the MAC address of the router
8. Click update
That's it
Now, if you connect your airport express to your router wirelessly, all the steps are the same except for step 5. In this step, select WDS remote instead. Everything else is the same.
I followed those instructions exactly with my Airport Express and, after restarting, the amber light is flashing on and off continuously and the Airport Utility can't find the Airport Extreme base station. What the heck went wrong here?Update:
I restarted the laptop I used to set up the AX as well as pushing the "reset" button on the AX (first time - pressed it for 1 second, Second Time - pressed and held for 15 seconds then let go). The Utility still isn't recognizing the base station.
I also upgraded the Utility's software to 5.5.3 right before I went through these steps, and now it's not recognizing the base station. ARGH.
Update #2: I plugged the AX into my laptop with an ethernet cable and the utility STILL can't detect it. This is ridiculous.
Update #3: Not 30 seconds after update #2, it FOUND the **** AX >.< I'm updating the firmware, but I still can't get it to work as a repeater station if I have to plug it into my laptop all the time JUST to get the Utility to recognize that yes, Virginia, there IS an Airport Extreme.
Message was edited by: bleedingrose19
Maybe you are looking for
-
Firefox 6 hangs without an error message/crash report when I try to run it.
I've been running a previous version of Firefox 3.x without incident and just tried upgrading to Firefox 6. I've had this same problem with trying to upgrade to Firefox 5 in the past. The installer runs fine and reports no problems. The first time I
-
0ORGUNIT short text displayed in variable selection screen
Hello experts, I use the 0ORGUNIT as variable in the selection screen, when i use the selection button, the 0ORGUNIT is displayed as a hierarchy but the text are in short text. In the query, the text are well displayed in Medium-Lenght text. Where ca
-
I just upgraded to LR4, and have found that I can't set ratings simply by typing a number while a photo is selected. If I hold the shift key while typing a number, the rating is set, but the same image stays selected. This is with an "upgraded" catal
-
HT4489 iCloud contacts - how do you import from exel
If I want to import vcards from an exel spreadsheet, does it need to be formatted in a particular way? Where can I get help on this?
-
How does After Effects work for you guys?
Love to hear feedback!