Can't install app server 8 on XP - PLEASE HELP

Hi. I am new to J2EE programming and am busy going through the J2EE tutorial and am trying to install sun java app server 8 on my PC which is using windows XP.
I suspect that some kind of "firewall" is blocking a port that is needed for the install as the installation just freezes after i specify that I wish to install to location X. I have literally waited up to an hour and nothing happens so the problem is definetely not that I am being impatient. Also i checked my file system and the installer never even gets as far as creating the location X. It does get as far as launching the Java Runtime enviroment etc. but just "hangs" when I specify to install to C:\Sun\AppServer\ (default - I have also tried different locations and hard drives to no avail.)
I did manage to install the same app server 8 on Win 2000 but have since formatted that particular hard drive and installed XP Service Pack 2 (I also uninstalled Service Pack 2 as I was worried that the firewall in Service Pack 2 was stopping the install). I did also disable all my other antivirus / firewall programs.
I have also read the other forums and have tried the install from the command line (after renaming to .zip and unzipping the installation file). It also stops at the same point on the command line.
PLEASE HELP me because the only other thing i can think of is to install Win 2000 again; install the app server and then upgrade to XP. I really only want to do this as a last resort as it is very time consuming to re-install all my programs again!!!! I have even tried installing other versions and the bundles and the NetBeans 3.6 + J2EE platform bundle but get the same problem (after it installs the NetBeans IDE).
There are no errors that I can see as the GUI just freezes (I can't click on "next"; "cancel" etc.) I can only click on the X (Close button) and the program then says that it is not responding and from there I can quit.
THANK YOU
Ian

Please check both potential causes described in this thread since your situation sounds the same:
http://forum.java.sun.com/thread.jspa?forumID=136&threadID=564300
(first issue would be productregistry lock file, second one GUI problem).
Since you are saying that GUI freezes, second one sounds more likely - so try running the installation in command line mode as described in the thread.

Similar Messages

I do not remember my password of filevault and i can not install some softwares on my mac please help me

i do not remember my password of filevault and i can not install some softwares on my mac please help me

Are you sure FileVault is active? You could not have started up without entering the password.
If you are sure, see below.
If you forget the password and FileVault is on

I just purchased photoshop elements and went to retrieve my serial code. The web page provided to retrieve it loads blank, even when clicking on the URL through adobe's web site. I can not install my product without this. Please help

I just purchased photoshop elements and went to retrieve my serial code. The web page provided to retrieve it loads blank, even when clicking on the URL through adobe's web site. I can not install my product without this. Please help

Drusso77 if you are continuing to face difficulties locating your serial number then please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html. You are also welcome to contact our support team at http://adobe.ly/1aYjbSC.

Can I install App Server 10g (10.1.2) on Solaris 10 Operating System

Hi,
I have to install Application Server on Solaris 10 (SPARC) and I have the Setup of AS 10g 10.1.2. So,Can I install this AS on my system.
Also I have search for this on OTN and find that AS 10.1.3 is the version that
can be used but its installation don't have Forms, Reports, Discoverer Services
So, plz help me

Hi,
Yes, U can. Just check this link.
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
Regards,
Hamdy

I can't install apps from my apple store, need help

Hi All, I have an iphone 3GS. I used to download free as well as purchased apps from the app store. For some reason I am not able to do that anymore. For example when I try to open my facebook app, it keeps on not opening it, last time it did that to me, I deleted it reinstalled it, but now I am stuck because I can not install anything from the app store. Pls help what it does it: I click on the app store, it will allow me to pick the app I want to install (e.g. facebook, then it gives me the option to download, i.e. 'Free' but the free is with a plus sign i.e. "+Free" then when I click on it, the "Install" appears but partially like "insta..." then am stuck can't install or do anything, anyone with idea on how to resolve this?
P.S. I have not upgraded to IOS 4
I have tried to restart my phone so many times,
I have logged out and re-logged into the app store on my iphone.
thanks much

Log out of the Apple ID on your iPhone.
Reset your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Log back into to your Apple ID with the current password.

Can't install Adobe Flash player ERROR. Please help

I tried to download the update of Adobe Flash Player BUT every time I try to download it... Look at the screen shot. ERROR.
Please help me I am really happy if someone here can help me.

Hello,
The log file indicates there are permissions issues on a couple of files and they are not being removed. This is preventing the installation of the new version. Please run the uninstaller, posted here Uninstall Flash Player | Windows, and post an updated FlashInstall.log file, and a screenshot of the files remaining in the /Macromed/Flash directory after running the uninstaller. Please only run the uninstaller and do not attempt to re-install at this time.
Thank you.
Maria

I can't install the QuickTime!!! Please help!!!

I can't install the QuickTime. "The QT installer write: A newer version of QuickTime is already installed. This installation cannot proceed while the newer version of QuickTime is installed."
But I not installed QT, I have not QT on my PC (WIN XP SP3)!!!
I'd like install QT after iTune!
Please help me anybody!!!

C:\WINDOWS\Installer will show .msi files. Right click and go to Properties then Summary will show what application they pertain to.
If you go to Start>Search>For Files or Folders>All files and folders, then type in .msi and do a Search. Then place your mouse pointer on one of these .msi a window will appear showing the info, which maybe easier.
At some point QT was installed on the computer and removed. Old QT .msi installation files were not. This is why you are having a problem.
http://support.microsoft.com/kb/290301

Can't install tiger v. 10.4 please help!

I may be being incredibly stupid here but how I am supposed to install Tiger if my iMac doesn't have a dvd drive?? I currently run OS v.10.2 and need to upgrade, I bought Tiger and now I find I can't install it because I can't run the installation DVD! Surely there must be a way around this which doesn't involve me paying out for a DVD drive. If anyone can offer me any help if would be much appreciated!
Many Thanks,
Linsey

Hi,
you can exchange your DVD for installation CDs. I'd call Apple to get that done. Since we don't have Apple Stores around here I don't know if you could also go there and have your media exchanged. Alternatively you can hook up a DVD-equipped Mac via Target Disk Mode and install it that way.
Björn

App Server 7 EE errors Please help

Hi all
I have a cluster of 3 App Servers 7 EE load balanced by 3 Web Servers.6.1
When i access my clustered application it suddenly becomes slow and i get these 3 errors on and on in the Web Servers log:
[24/Nov/2004:12:48:55] warning ( 3510): for host 192.168.107.23 trying to GET /RCU/images/topnav_ing_logo.gif, finish-response reports: HTTP2228: Response content length mismatch (2697 bytes with a content length of 5290)
[24/Nov/2004:13:05:56] warning ( 3510): reports: lb.runtime: ROUT1014: Non-idempotent request /RCU/css/ing_exchange-mx.css cannot be retried.
[24/Nov/2004:12:15:02] info ( 3510): reports: lb.runtime: RNTM3003 : Error servicing the request : selected server could not service
These errors cause the static content not being shown (images or css's), or the typical blue screen : "Due to a temporary error the request could not be serviced"
The app servers dont show warnings or errors about this (they only show some HA SSO warnings) and the network settings look fine, I have no network or communication problems between the servers
Does anyone know what could be happening??
Thanks a lot

I got [08/May/2008:01:48:40] info ( 7652): reports: lb.runtime: RNTM3003 : Error servicing the request : No server to handle
when I was trying to test the load balancer between instance1 an instance2

Am not able to install any of microsoft office in my laptop... how can i install ms office..? please help me

am not able to install any ms office

Resetting User Password in Lion and Mountain Lion
Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton

Can't install any OS in Presario SR1319RS - please help

I have "inhereted" a HP Presario SR1319RS from my friend. The PC was working well until it got a virus. He gave it to me because he bought himself a new one.
I deleted everything, including the System Recovery (F10) partition. He did not have the original CDs that came with the PC anymore. Anyway, I have tried to install Ubuntu and Windows XP in separate ocassions. The PC restarts itself when the Ubunty installation process is about to start. It cycles itself all the time.
When trying to install Win XP, I am able to format the hd (SATA), create the partion where the OS will be hosted, but after going through that process and copying every file necessary from the CD to the PC and when it's about to initiate the installation process, it reboots itself. It does that everytime.
I have tested the memory modules and hd in other PCs, and they work w/o any issues. Is there a "special" way that HP used when putting this PC together.... that you know of?
I don't want to label this PC "unusable" because I knwo it can be salvaged. So, please let me know if you know of any tricks, advices or gossip that you know and could help me fix this PC.
Many thanks in advance.

You're very welcome.
That I do not know.
Did you try only one memory module in the PC at a time to see if one is flaky and causing the problem?
I once had a PC that was behaving like yours. It did have a bad capacitor which I had an electronic tech friend of mine replace.
I thought that was the problem. Nope. XP would get to a point and crash.
So, I decided on a whim to just run the PC with one memory module (there were two).
I tried with one and XP crashed as usual.
But when I removed that module and replaced it with the first one I took out, XP loaded fine and that was the problem--a partially bad memory module.
I replaced it (actually I maxed out the PC to 4 GB) and it has been running fine ever since. It even has the same chipset as yours (Intel 915).

I can't Install windows via Boot Camp Assistant please Help!

My superdrive damaged so i use external dvd-rw. Boot camp assistant shows only two options and it recognise my ext dvd-rw then i partition for boot camp partition but after the partition that restarts automatically then blank screen displayed infinitely give me solution.

Also, If you have a Mac which is a UEFI model, and not in the list as shown by the BC Info.plist file, then a direct UEFI install of Windows 8 (not Windows 7) is possible and works very well.

How can I install apps on a device that has a "for work" app installed?

Hi, I have an iPod touch version 4.3.5 (ML1). Model is MC540C.
It has been provided for me from work, but I can use it as I wish.
The apps that are installed are:
Facetime
Music
Photos
Camera
Videos
YouTube
Stocks
Notes
Weather
Utilities
App Store
Game Center
Settings
Contacts
iTunes
Safari
Maps
Mail
Calendar
"one app installed by company"
The last app is needed for when I do work. It doesn't need to run on the background. When I'm doing work, I need to input some information in that app, and sync it to my company's server.
I would like to install some apps (free) of my choosing. But I'm coming across a hurdle...
I choose "App Store" in Home.
I search for a free App (for example the Google Search app by Google Inc)
I'm taken to the app's info screen. I tap the blue "Free" button.
The button becomes a green "Install App" button.
I get a pop-up box saying
Apple ID password
[email protected]
[password]
How can I install apps of my choosing without having a "work app" get deleted? This work app was installed on the "[email protected]" Apple ID.
Thank you.

Ingo2711, when you did this:
I logged out of my AppleID on the iPod, took it to his computer, synced it, which erased all of my apps. I installed the default apps plus one app that he bought using his account info.
You made his computer the syncing computer.
When you did this:
Connected to my Mac and iTunes and tried to sync one of the apps I bought with my account. The app shows up on one of the pages before you start the sync, but once you apply the sync, it does not transfer.
And, of cause, no restrictions set at all.
You changed syncing computers but you can only sync apps (and some other things like photos) from only your one syncing computer.

I can not install apps in my new ipod touch ios 6

i can not install apps in my new ipod touch ios 6
it is showing appication is failed to installed
why is this happening
can any one help me....

The problem is when i drag n drop downloaded apps from torrentz into itunes n syncronize it add those apps into my itouch ... but the message shown in my i touch is .. that application failed to install..
in the itunes those appliacations are unchecked automatically ... but i can install apps which are downloaded from the istore .... they are working properly
but the ones i downloaded from the torrentz are not getting installed..

Can I install Calendar Server on another partition other than root file system

Can I install Calendar Server on another partition other than / ?

In this version, the default path is hard coded to install in
/users/unison. However, if you do not have enough room on your root
partition or choose to install it in another location, you can do so
using a logical link. The installation guide explains this as well.

For example, suppose you want /users/unison, which must NOT already
exist, to be logically linked to /var/opt/unison, which must exist.
Then as root user:

<UL>
<LI>
Create the directory /users (if it does not already exist)

% mkdir /users

<LI>
Create the logical link. The directory /users/unison must
NOT exist before doing this.

% ln -s /var/opt/unison /users/unison
</UL>



makes a lot of sense. I am looking for an answer myself. My documents folder long ago outgrew it's place on the boot drive. It would be nice to keep it in the user folder organized on another disc

Can't install app server 8 on XP - PLEASE HELP

Similar Messages

Maybe you are looking for