Can't install Audio content

I am unable to install the audio content for Soundtrack on FCS2 . During the process the installer will ask for Audio content disc 1 ,I insert the disk and then after a few seconds the installer asks for the Final Cut Studio install disk . I insert that and get the message that there was an error with the installation and to try again . All the other apps for FCS2 install fine . The only issue is installing the Audio content disks. Apple sent me a replacement Audio content disk and I had the same issue . I even tried installing directly from the Audio content disk as opposed to going through the FCS2 installer . This time it seemed to install disc 1 but gave me the error message when I installed disc 2 . Any ideas ?I have been talking to Apple but there is no resolution yet . They told me to make a disc image of the replacement disc and try to install from that using a different user account . I'm waiting for the disc image to be created .

Has anyone found a solution for this? I am also having the same problem with installing the audio content. Any help would be greatly appreciated. Thanks!

Similar Messages

  • Can't install audio content any idea?

    Hi
    I don't understand this. I installed first audio content in final cut but it is asking put second cd. I did that. But there is only one way to get through is can't eject cd 1 . is i drag n drop this. cd 1 is out but when i put cd 2 in it is canceled automatically. I have to do all over again. Any idea what should i do to install 3 cd's?
    Thanks in advance

    See RedTruck's reply here:
    http://discussions.apple.com/thread.jspa?threadID=1710283

  • How can i install audio content on a different drive

    i did install logic studio 8 without all the jam pack cause i was short on drive space and i am wondering how i can install the rest of the dvd's on a different drive....i am using a macbook with 60 gig HD so i didnt have any other choice than unchecking all the jam pack if i wanted to install the appz
    TIA !!
    Gprok

    In the installer, next to each jamppack is a drill-down arrow - open that and you can choose where to install the loop content.
    The instrument content has to go to your Garageband Instruments directory, but you can move the sample content (exception: the "Hybrid Synthesizers" sample folder) to your external drive afterwords, as long as you leave the instrument and settings files where they are.

  • Can't install audio for hp 530...it says no media device

    please help i can't install audio on my hp530 

    Hi peshi77,
    Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
    Once downloaded, please follow the on screen instructions. I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • MSI 785GM-E51 can't install audio drivers

    Hey, I would be grateful if you could help me with this problem.
    When I try to install the audio drivers of this mobo(785GM-E51), Windows 7 can't find them. It offers me another set of drivers - that of VIA's, but it should be Realtek's. Normally it wouldn't be a problem, but I have a an issue with front panel microphone jack(it's not working), so I want to install the proper drivers. I tried disabling auto-installing option of Windows 7, and then install the drivers that MSI offers officially , but still the computer acts as if I didn't install anything.
    EDIT: It seems that I have a different motherboard - in the document I have(about the parts of PC), it says that the computer has MSI 785GM-E51, but now that I checked the informationa about motherboard in the Windows itself, it appaars that ASrock M3A770DE is in the case. So I guess the fact that I can't install the MSI's drivers is because of different mobo. I have no idea how  this could've  happened.

    >>Posting Guide<<
    Why don't you open up a case and read the model? Is the computer secured with some sort of sticker that voids warranty if opened?

  • Can't install additional content

    I installed OS X Yosemite and installed Logic Pro X. Logic installed fine and I tried to download and install additional content. I got done download all additional content and it stopped installing. I have no idea how to get the additional content. Is there anybody can help me out?

    Check the Additional Content Dialog Window to check all the content truly has been downloaded.. If not, check the stuff that hasn't downloaded and try again... following the tips in this User Tip..
    https://discussions.apple.com/docs/DOC-6422

  • Can't install Audio Update 2007-001

    I held off on installing the 10.4.10 update until recently.
    After installing Mac OS X 10.4.10 Update v1.1 (I installed the Intel Combo update), I am unable to install the Audio Update. The Select a Destination step says, "You cannot install Audio Update 2007-001 on this volume. This volume does not meet the requirements for this update." Trying to install onto the Macintosh HD, by the way.
    Could it be that ver. 1.1 of the 10.4.10 update already includes the Audio update? The Apple site lists the Audio Update above the 10.410 v. 1.1 update, which implies that it's more recent.
    I'd appreciate any info.

    OS 10.4.10 v1.1 does contain the Audio update see
    http://docs.info.apple.com/article.html?artnum=305840
    chris

  • How can I install audio driver from BootCamp into Windows 7?

    After an uneventful installation of Window 7 (64) onto iMac  cor 2duo OS X 10.6.7.
    NO SOUND.
    I have tried to replace the Audio Driver HD through Device Manager: it is not working
      a) if I disable the Windows Driver and try to install the Cirrus driver from the BootCamp disc, I am informed that "device already has the optimal driver"
      b) if I unistall the WIndows driver, Sound Video Game Controller disappears from Device Manager-so there is no place through which I can install a new driver.
    c) If I start from the BootCamp/Driver folder and select Cirrus and Install, I am again getting the answer that the "device already has the optimal driver"
    I am frustrated! Please, can you advise how to proceed?

    You do NOT want to disable unless you are not going to use a device.
    You want to rollback or uninstall and get Cirrus driver.
    Try Boot Camp (Setup) repair-reinstall - to enable the device.

  • Can't get audio content off iPod onto MacBook iTunes

    Just did some recording with the iPod using an attached microphone. When I open iTunes, I can see the directory with the audio recordings (in Voice Memos directory on the iPod) and even listen to them, but I can't get them to transfer to my music libary on my Macbook iTunes. I need those recordings to insert into iMovie. Try dragging then to iMovie and that didn't work either.

    Shooting in the dark here, but a program like Senuti may help.
    Or there is a manual method of moving content from iPod to computer described here.

  • Can't install audio on Presario C300

    I have a Presario C304NR that came with XP Home. I just installed XP Pro and now there is no audio device. I installed Microsofts UAA audio driver and then when I install the audio driver from HP  it get the error- driver installation failed no audio device present.

    Try the latest one listed for 2007 here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=32456​...
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • Can I install Adobe Content Viewer on a PC?

    My client uses Adobe Content Viewer on his ipad. He wants to view the exact same files on his laptop (PC running Windows 8). Is this possible?

    Windows 8.1 support is coming. I would hope by the end of the year now that
    8.1 is available.

  • Installing audio and jam pack content

    I'm running logic pro 9 on a mackbook pro and want to save sessions and store audio and jam pack content on a 7200rpm firewire 800 external hard drive. I installed the audio content on the external drive successfully but the installation software won't allow me to install the jam pack content on the external drive; it wants me to install it on the system drive which I had hoped to avoid.
    Is there a way to perform the installation on the external drive?
    I also installed logic on a mac pro, and on this install, the software won't allow me to install audio content or jam pack on a drive different than the system drive.
    Any ideas on how to resolve these two issues?

    hi joearturo
    I've got the JPs on an ext hdd. It's been a while but as I recall I installed onto the system drive, then dragged the jam pack folder, say orchestra, into my plugins samples folder on the ext drive and deleted the folder on the sys drive.
    When logic opened next it gave a message saying something like "can't find folder" choose location. A drop down box appeared with all the drives and I selected the ext and the appropriate folder. Everything was okay from then on.
    Hope this helps, although its somewhat convoluted.
    Scorpi.

  • Audio Content from Logic 9

    I have Logic Pro 9 installed with full audio content.
    Do I need to install audio content coming with FInal Cut? Or Logic' audio content is the same to Final Cut's?

    Hi -
    This question was recently discussed in this thread:
    http://discussions.apple.com/thread.jspa?messageID=10557242
    Hope this helps.

  • How can I add the audio content cd after logic finished installing ?

    There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
    If you can help me please be very specific as to how to do it so that I can follow the directions properly.
    Please help me.
    Thanks

    Hi
    You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
    CCT

  • Can i install 'extra audio content' after i have installed the main program?

    hello all!
    i need to install the 'extra audio content' that comes with Logic, as i didnt include them when installing in the first place.
    how do i go about doing this?
    i mainly need all the different presents and chanel strips, not so bothered about the loops.
    would appreciate any help.
    many thanks

    That's what usually happens - you download and install Logic first and the additional content is downloaded from within the application (under the Logic Pro menu at the top left). Unless you have a blazing internet connection, you're probably better to download one set at a time - you can delete stuff that you don't want, if necessary or move loops to another drive etc..unfortunately the setup programs don't allow for installation directly to another drive.

Maybe you are looking for