Can't install both GART driver and display driver!!

Ever since I got my k8n neo 2 + 3200 winchester for christmas I have had tons of problems. Problems that even come out of nowhere, like when one night when I was playing WoW, the game crashed and I eventually had to reformat. Ever since then I have been unable to install both the latest nforce GART driver and the nvdisplay driver at the same time. I can install either one seperately, but when both installed Windows boots up to a black screen. And there's nothing I can do about it. I've just gone with having only the display driver installed, but I noticed that my 6800GT has the bus listed as PCIx0 which is obviously incorrect, it should be AGP 8x. I'm pretty sure that is because the GART driver cannot be installed, as the GART driver has software to manage the AGP bus. I'm ALSO pretty sure that this is one of the reasons I get such pathetic performance in Doom 3.  It dips down to 10-15 fps often, and it NEVER did that when I had my old P4 3.0 ghz. What gives? Does anybody have ANY suggestions as to why I can't have both of these drivers installed without windows just giving me a black screen???   
I am so disappointed with this board that I don't see how I could ever bring myself to buy MSI again. 

Quote from: Tiresmoke on 09-March-05, 23:41:51
Sarcasm.
http://dictionary.reference.com/search?q=sarcasm
sarcasm = "A cutting, often ironic remark intended to wound."
That comment of mine you quoted was neither ironic nor intended to wound anybody or anything. I was simply voicing my disappointment in this motherboard, I have had many other problems with this board besides the one I am asking for help with right here. Please know what sarcasm means before you accuse me of using it. It's not my intent to get into trouble here. No hard feelings.
Quote from: Tiresmoke on 09-March-05, 23:41:51
This is not a MB issue.
 I never had this problem with my pc and drivers before I bought the Neo2. I am fully open to believing that my PSU is the problem, however.
Quote from: Tiresmoke on 09-March-05, 23:41:51
However as you didn't say it was a clean install
Sorry, I thought this was clear enough. (down)
Quote from: Law&Order on 09-March-05, 08:42:47
I eventually had to reformat.
Anyway, I am going to find out my PSU volts in a moment. I will edit this post when I have found them.
Edit: Argh, I've never looked for PSU specs before. Can anybody tell me how to do that? PSU is high up in the case and I'd have to remove it to get a clean look, is there any other way of doing it? Sorry, a little embarrassing for me.  I appreciate all of your suggestions. Thanks!

Similar Messages

  • Can I install both mac os and Windows 7 on MacBook Pro?

    Can I install both mac os and Windows 7 on MacBook Pro?
    I saw Windows XP picture on this website. And I would like to try mac os while using Windows 7.
    And does Windows 7 on MacBook Pro support high quality game experience? Im sick and tired of reducing to low quality graphics to play some nice games such as GTA 4 and new released games. Hope I can play games with high quality.

    If you have a brand new MacBook Pro or have installed Lion on an older one, you can only instal Windows 7 on Boot Camp (for some reason you can't use Vista or earlier). If you have a Windows 7 CD and a license, it's pretty easy to do via Boot Camp. See here for instructions: http://support.apple.com/manuals/#macos
    If you install via Boot Camp, Windows 7 will run as fast as your computer is. Generally, MacBook Pros are very fast laptops, so you should be pretty good. That being said, just like any laptop, if it's a cheaper MacBook Pro, you won't have access to as capable graphics processing as more high-end machines. So if it's a newer game with crazy impressive graphics, you will likely not be able to tap into the highest settings on the game on any laptop.

  • CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.

    oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
    Reply
    Dear Friends,
    I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
    at this time my database was into another machine.
    then i installed oracle 9i database into the same machine
    (as the oracle 9ias was installed)
    at the instalation of oracle 9i database one error comes
    and shows that Agent configuration Assistant Installation
    fail.
    but After installation of database it work properly.
    there is no problem.
    but when I try to run from through web(by using oracle 9ias)
    it gives Internal error(500).
    i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
    HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
    With regards
    Siddharth Singh
    [email protected]

    Hi James,
    Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
    If yes what is the version of RH Linux you were using ?
    Any docs for that ?
    [email protected]
    Regards
    Amudharasu

  • Can I install both Snow Leopard and Windows 7 on the same version of VMWare 5?

    Even though I am running Apple OSX Mountain Lion 10.8.3 on my new 2013 iMac, I have just installed VMWare's "Fusion 5" so I can have Windows 7 installed on the "Fusion 5, for limited usage needs.
    I also would like to have a running version of Snow Leopard available to run my large collection of original Lynda.com training DVD's and CD's ... which unfortunately, now only allow the Lynda.com GUI player to operate in (and up to) Snow Leopard (at least this is what the Tech folks at Lynda.com have told me).
    Since Lynda.com is no longer producing any or their training programs on CD or DVD any longer, and because they have stopped supporting their training programs to run on Lion and above, I will have to have a version of Snow Leopard installed to run these training programs, and still be able to run them using the Lynda.com GUI player.
    So here's my dilemma:
    1.  Can I install both a version of Snow Leopard OS on my "VMWare "Fusion 5" .... along with a running version of Windows 7 on       the same "Fusion 5"?
    2.  Do I install only the Windows 7 on the VMWare, and find some other "device" to run a version of Snow Leopard off of?
    3.  Do I consider using "BootCamp", in conjunction with "Fusion 5", to get access to both Snow Leopard and Windows 7?
    Has anyone had any experience installing BOTH a previous (older) version of Apple OSX  ... AND ... a Windows OS version on one installed version of VMWare "Fusion"?
    OR
    Any suggestions on how to set up having access to both Snow Leopard and Windows 7 .... while keeping OS Mountain Lion as my main OS?

    mende1
    Thanks ... the "You have to purchase Snow Leopard Server" I knew about, and a few days ago I just ordered a copy from the Apple Store:
    Snow Leopard Server - Ordered at: 1-800-692-7753 ... OR ... 1-866-254-8313
    I asked for Apple Snow Leopard Server (Model MC588Z/A (SLSVR)
    "Unlimited Client License"
    It was around $25.50 (USD) with sales tax and shipping (NYS).
    One thing though ... when you mention:  "you should make two virtual machines".
    Not being too familiar with "Fusion 5" yet, Is setting up "two machine" all done under one installed version of "Fusion 5"?
    Would you have "links" to any "Fusion 5" installation instructions/info for setting up the
    "two machines" (one for Snow Leopard and one for Windows 7)?

  • Can I install both Premiere Elements and Premiere Pro on my computer?

    I use elements but I want to learn premiere pro so I just installed it but in the process elements was deleted.  I still need elements to finish projects I've started in elements.  Is there a way to have both programs on my computer and use both elements when I want and premiere pro when I want?
    Is it possible to open an elements file using premiere pro CS6?  I tried but it didn't work.
    Thank you.

    ATR,
    I agree completely.
    Without every version, over the last 10 years, of each program, it's almost impossible to tell a poster, "Yeah, that will work... "
    It's the same with Premiere (not Elements, but the program before the "Pro" designation) and Premiere Pro. I inherited a big Project, originally started in Premiere 6.5 on a Mac. I had PrPro CS 2 on a PC, and all of the Project files Opened very well. IIRC, there were a half-dozen Transitions, that I did not have, but PrPro gave me the name of the Transition, plus the TimeCode of where it was used. All I had to do was change the missing one to Cross-Dissolve (do not know why the original editor deviated from that?), and all was good. However, when Adobe went with the Pro version, it was ONLY ported for the PC - no Mac support at all. Then, with PrPro CS 3, X-platform support WAS added. If a Mac user had an earlier Premiere, or Premiere Pro Project, before CS 3, they had to find a PrPro PC-user, with PrPro CS 3, who would Open that earlier file, then Save_As, so that they could Open it on their Macs, with later versions. Real "hands across the aisle" thing. We PC guys helped many Mac users to get them up and editing, but it was tough to explain all the ins-and-outs to them. Lot of confusion in those days. We do not see it that often now, as Premiere, up through version 6.5 are fading into history.
    Also, to add to that confusion, Adobe shook things up, with the release of Premiere 7.0, also officially called Premiere Pro 7.0, but also Premiere Pro 1.0, at the same time. Most countries got only PrPro 1.0, but not all. Even some Adobe Staff folk do not realize that there were three, coincidental names for basically the same program. And, as that was the point of transition to PC-only, puzzle over what version a user really has. I have had a few state that there was NO Premiere Pro 7.0, and that it was ONLY Premiere 7.0, or Premiere Pro 1.0. I have seen the boxes that show that some folk DID get a program officially named Adobe Premiere Pro 7.0. Just a bit of arcane history.
    Hunt

  • Satellite A210 - Can't install common module and display driver

    Just downgraded to XP, downloaded drivers from toshiba and the installation ended with an error message saying no driver found for my hardware. Happened with Common Module and ATI Display Driver.
    I mean, I need em both!
    Help!

    Hi
    I checked the Toshiba European driver page and it seems that the XP drivers have not been released for this A210 series!
    I think you have simply tired to install not compatible Common Modules on this notebook.
    Thats a reason why you cannot install it.
    Regarding the display driver;
    Try to install the drivers for notebook models:
    Equium A210 PSAEJE
    Equium A300D PSAK2E
    Equium L350D PSLE2E
    Satellite P200 PSPBLE
    Satellite L350D PSLE0E
    Satrellite L300D PSLC0E
    I think one of the drivers released for these series shoudl run.

  • I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

    I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

    I do not know what you are waiting for.
    I'd make a backup of your important stuff before cloning the entire disk.
    Carbon Copy Cloner will copy your startup drive to an external  firewire drive.  You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
    http://www.bombich.com/software/ccc.html
    SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

  • My wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

    my wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

    graham218 wrote:
    are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?
    Generally YES.
    It's possible to hold separate iTunes library's on a single machine.
    Generate two new folders inside the Music folder of the Mini and name them differently; e.g. man and woman.
    Copy your whole library into "man" and your wifes into "woman"
    Go to sharing in the system settings of the Mini and share the Music folder in your network.
    After copying the whole library's to the Mini you may point iTunes to the new location at startup by holding the option key (alt) at the keyboard.
    iTunes will then ask you where the library is located.
    Point it to the matching library on the Mini.
    That's all.
    Lupunus
    PS ... If you both use only the Mini you have to setup a user account for each and just copy the whole library to the Music folder in particular.
    Message was edited by: lupunus

  • Cannot install Yosemite as it keeps telling me both my internal and external drives are time machine backups

    Cannot install Yosemite. Keeps telling me that both my internal and external
    drives are backing up with TIme Machine. Any suggestions?

    Is it actively backing up, or are you encountering a dialog stating that Yosemite cannot be installed because the disk is being used for Time Machine backups?
    Read OS X: Cannot install on a volume used by Time Machine for backups
    If for some reason you have a folder called Backups.backupdb at the root level of the hard disk on which you want to install Yosemite, move it to the Trash.

  • I can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive.

    i can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive. Help please ?

    Most likely, the "requested location" where you are trying to copy files to does not have WRITE permission, and so you need to change the permissions.

  • My old IMAC is a few years old.  Just bought a new one OX 10.8.2.  The old one is  OS X 10.5.8.  Can I install Lion or ewuivalent and then synch both on ICLOUD.  Or is there another way to synch the two computers.

    My old IMAC is a few years old.  Just bought a new one OS X 10.8.2.  The old one is  OS X 10.5.8.  Can I install Lion or equivalent and then synch both on ICLOUD.  Or is there another way to synch the two computers.

    You can use Migration Assistant in Applications > Utilities to get all your files from one iMac to the other. If you want to upgrade your older model to MtLion you need to have at least a mid 2007 Intel Core 2 Duo with a bare minimum of 2GB of RAM. Then you need to buy the Snow Leopard 10.6.3 DVD , update with
    Mac OS X 10.6.8 Update Combo v1.1
    at which point you can access the App Store to purchase and install MtLion 10.8 where you would then have access to the iCloud.

  • Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer?

    Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer? I like the "fill light" feature in 3 and use it a lot. I would have not gotten 5 except that the images from my new Canon 5D Mk III are not re4cognized on 3. I have 5 on a laptop and 3 on my desktop but would like to have both on my desktop .

    Yes you can do this, but you can also get rid of Lightroom 3 and use the "Fill Light" command in Lightroom 5. You need to set the Process Version to 2010 (default is 2012 in Lightroom 5). Use the menu command  Settings > Process > 2010
    But honestly, you would be wise to stop using "Fill Light", as the new sliders in Lightroom 5 produce superior image quality than anything you can come up with using "Fill Light". Yes, the new sliders take a little time to get used to, but your patience and effort learning the new sliders will be rewarded. You can find some tutorials and videos on using Process Version 2012 on that Internet thing.

  • If i purchase the creative cloud for photographers can i install it on laptop and desktop?

    If I purchase the creative cloud for photographers can I install it on laptop and desktop?

    How would I setup the catalogues so I can edit the same picture(s) from the two machines?  For example, I have a PC in my office upstairs, but sometimes I want to work on my Mac in basement?  would I store the photos and catalogues on an external drive and point to that from both machines?  Neither machine is portable.

  • Is it OK to install both Logic Pro and Logic Express on my computer?

    Is it OK to install both Logic Pro and Logic Express on my computer?
    I use Logic to perform live, but i only have 2 USB drives on my computer, and i use them during my performances, one for my keyboard, and one for my audio interface...........therefore, i dont have room to plug in the "node key" in order to use Logic Pro.
    So is it ok for me to have Logic Express installed, too?? This way, I dont need to plug in the "node key" (or whatever it's called).
    I know i can buy a USB hub, but i cant afford one right now.
    Thanks, daddies!
    www.myspace.com/johnnydepth

    I installed both on my PB 12" - no problem at all
    cheers!

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Maybe you are looking for