Can't install Cold Fusion; pasword invalid? sudo command?

When I try to install Cold Fusion, the installer states that my password is invalid or I do not have sudo command privleges. What gives? Where can I update this?
Thanks Ed

slithery wrote:
dominicm wrote:
slithery wrote:
The --asroot option has been removed from makepkg, which you would know if you searched the forum before posting...
https://bbs.archlinux.org/viewtopic.php?id=191635
I googled the error with no relevant results, then I searched the forum to make sure it wasn't solved with no relevant results returned for the search term "makepkg: invalid option '--asroot')". It's ironic that you accused me of not searching when you haven't bothered to search the error message yourself. If you had you would know the search does not return useful results until this post.
Sorry, I only searched for --asroot which brought up several relevant threads.
No big deal, but in general you shouldn't post things like "search the forum" as it's rarely helpful, and when it is the thread should probably be closed it those cases anyways...

Similar Messages

Installing Cold Fusion MX Developer on XP Pro

My Cold Fusion developer version that came with Studio MX
(original MX) is not installing correctly and/or my CF
administrator pages doesn't open, giveng me the following stack
error. Would it just be easier to download a fresh developer
version from the trial site or is there something else I need to
do?? My new computer is WinXP Pro, sp2 etc....
Error report:
java.lang.ExceptionInInitializerError:
java.lang.SecurityException: Cannot set up certs for trusted CAs
at javax.crypto.b.([DashoPro-V1.2-120198])
at javax.crypto.Cipher.getInstance([DashoPro-V1.2-120198])
at coldfusion.compiler.TemplateReader.decrypt(Unknown
Source)
at coldfusion.compiler.TemplateReader.(Unknown Source)
at
coldfusion.compiler.NeoTranslationContext.getPageReader(Unknown
Source)
at coldfusion.compiler.NeoTranslator.translateJava(Unknown
Source)
at coldfusion.compiler.NeoTranslator.translateJava(Unknown
Source)
at coldfusion.runtime.TemplateClassLoader$1.fetch(Unknown
Source)
at coldfusion.util.LruCache.get(Unknown Source)
at
coldfusion.runtime.TemplateClassLoader$TemplateCache.fetchSerial(Unknown
Source)
at coldfusion.util.AbstractCache.fetch(Unknown Source)
at coldfusion.util.SoftCache.get(Unknown Source)
at coldfusion.runtime.TemplateClassLoader.findClass(Unknown
Source)
at coldfusion.filter.PathFilter.invoke(Unknown Source)
at coldfusion.filter.ExceptionFilter.invoke(Unknown Source)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(Unknown
Source)
at coldfusion.filter.BrowserFilter.invoke(Unknown Source)
at coldfusion.filter.GlobalsFilter.invoke(Unknown Source)
at coldfusion.filter.DatasourceFilter.invoke(Unknown Source)
at coldfusion.CfmServlet.service(Unknown Source)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:241)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:348)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:451)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:294)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

I believe your MX Studio came with a developer edition of
CFMX 6.0. There are now several newer editions. Each is greatly
improved over the original CFMX (over 5 years old now). I would
recommend you uninstall CFMX6 and install the latest CFMX 7.02 at:
http://www.adobe.com/go/trycoldfusion
or at least install CFMX 6.1 updater 1. Both are available at the
same URL. The bottom dropdown is for CFMX 6.1. Each of the CFMX
installers allows you to choose between a trial version (enterprise
for 30 days, then developer) or a licensed version if you have a
license. The original CFMX 6.0 is not a good option at this point
in time.

How can we purchase Cold Fusion 10. Please can you help.

Please can you give detail how we gonna purchase Cold Fusion 10.

Kindly email at [email protected] for this concern, you would get required information there too.

Can't install AUR packages(makepkg: invalid option '--asroot')[SOLVED]

I've been unable to install any AUR packages with either packer or yaourt since a couple days ago possibly after a system update.
For example if I try to install kodi-standalone-service:
sudo packer -S kodi-standalone-service
(Type - y, n, n)
makepkg: invalid option '--asroot'
The build failed.
This happens to all packages I tried including ones that I installed before with the same command. I installed yaourt after I started to get this error but fails just like packer. I tried running as root or normal user with same results.
In case it matters, these are the steps I used to install packer.
I am at a loss as to why it suddenly stopped working, any ideas?
Last edited by dominicm (2015-01-04 01:41:15)

slithery wrote:
dominicm wrote:
slithery wrote:
The --asroot option has been removed from makepkg, which you would know if you searched the forum before posting...
https://bbs.archlinux.org/viewtopic.php?id=191635
I googled the error with no relevant results, then I searched the forum to make sure it wasn't solved with no relevant results returned for the search term "makepkg: invalid option '--asroot')". It's ironic that you accused me of not searching when you haven't bothered to search the error message yourself. If you had you would know the search does not return useful results until this post.
Sorry, I only searched for --asroot which brought up several relevant threads.
No big deal, but in general you shouldn't post things like "search the forum" as it's rarely helpful, and when it is the thread should probably be closed it those cases anyways...

Can we install CPO in silent mode through command prompt or batch script ?

Though it is easy way to install cpo using GUI.
my need is to install through cmd or script
can any one pls help...
Thanks in Advance

It is not supported at this time. I believe it will be around in 3.1... but that's out in the future. Von or Svetlana might be able to give more insight.
CPO install is pretty quick, are you trying to do mass installs or something?

Cold Fusion Install

is There a way to install cold fusion on vista RC1

Vista is not on the list of currently supported Operating
Systems for ColdFusion MX and ColdFusion MX has not been tested on
it. It is targeted to be supported in the next release (ColdFusion
8) which is due out later this year.

Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
Hope that helps.
/charlie

Circular: can't install libusb-compat for `pacman-key --init` [SOLVED]

So like a lot of people on here have upgraded to pacman 4.
I can't run `pacman-key --init` to update the keyring:
[stuart@myhost ~]$ sudo pacman-key --init
Password:
gpg: error while loading shared libraries: libusb-0.1.so.4: cannot open shared object file: No such file or directory
chmod: cannot access `/etc/pacman.d/gnupg/trustdb.gpg': No such file or directory
gpg: error while loading shared libraries: libusb-0.1.so.4: cannot open shared object file: No such file or directory
gpg: error while loading shared libraries: libusb-0.1.so.4: cannot open shared object file: No such file or directory
==> Updating trust database...
gpg: error while loading shared libraries: libusb-0.1.so.4: cannot open shared object file: No such file or directory
And because of signature issues can't install libusb-compat:
[stuart@myhost ~]$ sudo pacman -S libusb-compat
Password:
resolving dependencies...
looking for inter-conflicts...
Targets (1): libusb-compat-0.1.3-2
Total Installed Size: 0.06 MiB
Net Upgrade Size: -0.02 MiB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [######################] 100%
warning: Public keyring not found; have you run 'pacman-key --init'?
error: GPGME error: Invalid crypto engine
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
Last edited by Skipper_the_eye_child (2012-01-26 19:24:00)

That worked - thanks. It'd have helped had I remembered to write over pacman.conf of course! I've not done any mainentance for while, got a little rusty i'm afraid.
Last edited by Skipper_the_eye_child (2012-04-11 14:02:52)

Cold Fusion Websites fails

I have site on a Cold Fusion MX Version: 6,1,0,hf45343_611
running on A Windows 2000 server and IIS5 using a Microsoft SQL
2000 Cluster in the backend. When ever the cluster fails over the
websites fail. I then have to restart the 3 Cold Fusion Services
and do an IIS reset. Is there a setting that I can use to avoid
having to reset the services on the webserver?

Hi Upen,
Thanks for your response. It is a 64 bit machine and the setup is also 64 bit.
I would like to mention some points related to my deployment scenario:
We have a Windows server 2008 R2 Standard edition on Server machine.
I have a .net website appliaction deployed and running on this.
One of our third party vendor is developing Cold fusion application.
This Cold fusion application will be integrated in our .net website.
Deployment and configuration of Cold Fusion application and server wil be done by Third Party vendor.
I need to install Cold fusion and give access to Third party.
Issue when I install cold Fusion using default settings, my .net Website does not get loaded.
In Mozila and Chrome Browser I get blank Page with only Background image given in Body tab of page is getting displayed.
In IE Browser Page with background image given in Body tab of plus this text ' <script> src="" 'is getting displayed.
Regards,
Sarfaraj Shaikh

Xp pro config question with cold fusion(newbie)

Hello,
I'm a beginner and I want to learn studio mx 2004.In trying
to learn Macromedia MX for windows ,I've gone thru the installation
process in the manual for installing Cold Fusion for the server
side of things.My question is, I'm not sure if IIS is mnadatory in
order to use cold fusion.Is it a case of using one or the other or
is the IIS service required to run Cold Fusion? Also im using cold
fusion5 is cold fusion mx = to cold fusion 6.1?

Thanks for answering. Is there any benefits to running both
servers? I
don't want to confuse myself with too many
options.Essentially,I could
learn Dreamweaver (my ultimate goal) by using either
installation.
No, while it is possible to run multiple versions of CF, it
takes extra
configurations to do so. I would say this is unnecessary for
just
learning. I would strongly suggest upgrading. CF 5 is the
oldest and
most limited version of CF still officially supported by
Adobe. The
latest version is 7.0.2. There is a huge, major, complete
rewrite of CF
and many other bug fixes and enhancements between CF 5.x and
the current
version.
The current version and all versions of CF are free for
download from
Adobe for a personal development copy. If you do so now,
before you
start writing code, the upgrade install IIRC is quite
painless and will
use the configurations you have already chosen.

Cold Fusion Developer on Intel Mac

I just ordered an Intel Mac....will I be able to install cold
fusion on it for development?
I saw the system requirements posted on the site were for
Power PC processors. So I was just curious if anyone has
successfully used cf with Intel yet; without problems.
Thanks,

Many of us have this running on Intel just fine.
Heres probably the two best links out there to get it
working..
http://webmages.com/cfmxIntelOSXguide.html
http://cyberdust.wordpress.com/2006/04/12/cfmx7-on-macbook-instructions/
Cheers
Brendon
"jmortimer" <[email protected]> wrote in
message
news:eljlv4$8jr$[email protected]..
>I just ordered an Intel Mac....will I be able to install
cold fusion on it
>for
> development?
> I saw the system requirements posted on the site were
for Power PC
> processors.
> So I was just curious if anyone has successfully used cf
with Intel yet;
> without problems.
>
> Thanks,
>
>

Is there an upgrade path from Cold Fusion 7.0 to Cold Fusion 11.x?

Can you migrate Cold Fusion 7.0 to Cold Fusion 11.x?

You can use the Code Analyzer to check the code compatibility.
Regards,
Anit Kumar

What can be done when Cold Fusion 9 ODBC Services will not install?

What can be done when 64-bit Cold Fusion 9 ODBC Service will not install on a Windows Server 2008-R2 64-bit machine? Yes, most of the things in other discussions have been tried.

Hi GDMVU,
Save the below code as CF9_RemoveOdbc.cfm
<cfscript>
//login using admin
//createObject("component","cfide.adminapi.administrator").login("administrator_password" );
createObject("component","cfide.adminapi.administrator").login("admin");
//instantiate datasource object
myObj = createObject("component","cfide.adminapi.datasource");
</cfscript>
<cfscript>
     writeOutput("Removing ODBC Services...<br>");
     returnValue = myObj.removeODBCservice();
     writeOutput("ODBC Services removed");
</cfscript>
Save the below code as CF9_InstallOdbc.cfm
<cfscript>
//login using admin
//createObject("component","cfide.adminapi.administrator").login("administrator_password" );
createObject("component","cfide.adminapi.administrator").login("admin");
//instantiate datasource object
myObj = createObject("component","cfide.adminapi.datasource");
</cfscript>
<cfscript>
         writeOutput("Installing ODBC Services...<br>");
         returnValue = myObj.installODBCservice();
         writeOutput("ODBC Services installed");
</cfscript>
Now try the following steps:-
Change admin password in above .cfm pages for your CF 9 server.
Use RemoveObdc cfm page first to remove any existing faulty/corrupted Odbc services.
Use InstallOdbc Odbc services to install Odbc services there.
Hope this helps.
Regards,
Anit Kumar

I can't install Adobe Reader in my computer because an error: 1327 invalid drive G

I can't install Adobe rEader in my computer because of an error of installation: 1327 invalid drive G:\ (but that drive is plugged on!), an don't know how to make it install in C:\

Hello,
Welcome to Adobe Forums
This document will help you in Installing Adobe Reader :
http://helpx.adobe.com/creative-suite/kb/install-error-1327-invalid-drive.html
Thanks,
Vikram

Can't Install CS2, Tried just PhotoshopCS2 and got invalid serial #

Desperate for help! I have CS2. My computer crashed. I bought a mini laptop and discovered I can't install the suite because the screen resolution isn't high enough (the highest I can go is 1024x600). Since all I really need on this computer is Photoshop, I went into the installation disc to install only that program. When it asked for my serial#, I entered the serial for the CS2, and the setup says it's an invalid serial #. I called support, and she confirmed there's nothing wrong with my serial #, and my product is properly registered. Can anyone assist me with this?
I tried using a larger monitor on my laptop, but the system won't recognize it without some piece of equipment I do not have. I understand that the serial # on my box is for the bundle CS2, where can I find the product serial # for just the PhotoshopCS2 which is part of my bundle?
Help!
Thanks in advance,
Chelle

It won't let me get that far in the Suite installation. When the installation pops up, I click on the Suite and that's when it blocks me telling me that my screen resolution isn't high enough. I can't get to the screen that allows me to choose between complete and custom installation.
Thoughts?

Can't install Cold Fusion; pasword invalid? sudo command?

Similar Messages

Maybe you are looking for