Can't Install ColdFusion Builder 2 Hot Fix

I am trying to install the ColdFusion Builder 2 Hot Fix. When starting the InstallAnywhere program I get this message: Unable to execute the desired program. Please get another copy of the installer and try again." Does anybody have a solution?

Can you please rename the installer as follows and then try installing?
Adobe ColdFusion Builder 2 HotFix 1.exe
Thanks,
Krishna

Similar Messages

Can I install Coldfusion Builder as a plugin for Flash Builder?

I already have a licensed copy of Flash Builder 4.x installed, trying to install ColdFusion Builder as a plugin for Flash Builder. When I installed CFB, I selected install as a eclipse plugin and entered the path to the FB directory. Now I can't figure out how to invoke/add the CFB plugin in FB..
Thanks in advance

You should have uninstalled rather than simply deleting CFB 2 plugins manually .
Please do the following to fix it now. (If you have used Uninstaller to uninstall that would have cleaned all these things ):
Take a backup and delete the file: /Library/Application Support/Adobe/Uninstall/{b8c666c3-1efd-11b2-bf3c-e04be4b2b610}.db
And you will be able to install CFB as plugin to Eclipse now.
Thanks,
Krishna

Can't install Flash Builder Burrito

I can't install Flash Builder Burrito on my 64 bit Windows 7 PC. I have the CS5 Master Suite installed and AIR and Flash latest versions. Is there anyway to get this installed so I can do mobile development?
Here's the error info:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 17 error(s), 18 warning(s)
WARNING: Payload {7E5AA19B-0B85-4f44-BA26-728851489200} Adobe Flash Player 10 ActiveX is already installed and the session payload {0B0C731E-5584-4980-A0D2-4ADC89220426} Adobe Flash Player 10 ActiveX has no upgrage/conflict relationship with it.
WARNING: Payload {177E1CA1-14CC-4398-AB15-A5746EFE8F22} Adobe Flash Builder is already installed and the session payload {45CDBACA-8B52-4DAE-9601-287907A155BF} Adobe Flash Builder has no upgrage/conflict relationship with it.
WARNING: Payload {40F95A03-885A-45fb-9A14-486BEFEDDF34} Adobe Flash Player 10 Plugin is already installed and the session payload {A05D4EC5-033E-4446-9D96-1698FE490147} Adobe Flash Player 10 Plugin has no upgrage/conflict relationship with it.
WARNING: Warning: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Warning: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: Verifying payload integerity : Failed with code 1
ERROR: MsiConfigureProductEx failed with error: 1612
ERROR: The following payload errors were found during install:
ERROR: - Microsoft_VC90_ATL_x86: Install failed
ERROR: - Microsoft_VC90_CRT_x86: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed
ERROR: - Microsoft_VC80_ATL_x86: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Adobe Flash Builder: Install failed
ERROR: - Microsoft_VC90_MFC_x86: Install failed
ERROR: - Suite Shared Configuration CS5: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - Microsoft_VC80_CRT_x86: Install failed
ERROR: - Adobe Flash Player 10 Plugin: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - Microsoft_VC80_MFC_x86: Install failed
ERROR: - Microsoft_VC80_MFCLOC_x86: Install failed

This was fixed from a post in the correct forum.

Where can I download coldfusion Builder 2.0.1 plug-in

Where can I download coldfusion Builder 2.0.1 plug-in

Dowload the standalone installer. When you run it, it will ask if you want to install standalone or as a plug-in to Eclipse.
-Carl V.

Having trouble installing Coldfusion Builder?

I am running Windows 7 and have already installed Coldfusion 9. When I go to install Coldfusion Builder I get an error even before the installer loads up. The error I am getting is as follow:
C:\Users\Owener\Downloads\Coldfusion..exe
The NTVDM CPU has encountered an illegal instruction.
CS:0e1d IP:o1f3 OP:63 65 42 65 67
Choose 'Close' to terminate the application.
Does anyone have any idea how to solve this problem?

There shouldn't be a problem running on Windows 7: it installed OK on my Win7 machine.
I just noticed this thread is in the CF forums, not the CFB forum. They are two separate and only notionally related products. I recommend re-posting your question here: http://forums.adobe.com/community/labs/coldfusionbuilder. One benefit is that that forums is monitored by Adobe people, whereas the CF forums are not.
Adam

I can't install Flash Builder from the Web Premium suite, what should I do?

I just downloaded the Adobe Creative suite 5.5 Web Premium and am about to install the program but notice a note next to the Adobe Flash Builder program... it explains that my system doesn't have the requirements needed for this program. I checked and it explains further details stating that I need to have a • Mac OS X v10.5.6–10.6 and I doubled check which version I have and it's OS X 10.5.8. Doesn't this actually mean that it does meet the requirements?
Please advise as to what can be done to be able to download this specific program.
Thanks,
     Sarah-Kay

ok,
so for the memory:      it's 4 GB 1067 MHz DDR3 and when I click to
install the programs it says (Macintosh HD: 10,0 Go (459,5 Go
disponible).
As for the processor: it's 2.66 GHz Intel Core 2 Duo
Monitor resolution:    1920 x 1200
Le 12-02-28 à 17:35, Jeff A Wright a écrit :
Re: I can't install Flash Builder from the Web Premium suite, what
should I do?
created by Jeff A Wright in Downloading, Installing, Setting Up -
View the full discussion
We do still need more information such as how much memory you have,
resolution of your monitor, how much disk space you have free, which
processor are you using. I good guide is to look at the system
requirements and try to post for each of the items within the
requirements. The system requirements for Web Premium can be found
at http://www.adobe.com/products/creativesuite/web/tech-
specs.edu.html.
>
Also you can find this information within your System Profiler. The
easiest way to access the system profiler is to go to the Apple Menu
and select About this Mac. Once selected clicking on the more info
button will launch the System Profiler.
Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page: [http://forums.adobe.com/message/4235635#4235635
To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/4235635#4235635
]. In the Actions box on the right, click the Stop Email
Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by
email or at Adobe Forums
For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/message/2936746#2936746

Installing coldfusion builder 3

Trying it install coldfusion builder 3 as an upgrade on a new computer but when I put in the previosu serial number for cfb1 its saying its not valid. However it is a valid key.

Hello,
Best would be you use Contact Customer Care = http://helpx.adobe.com/contact.html >
> View all Products ... > Select a product or service... > Coldfusion > Select a topic ... > Using my product ... > I still need help ... > Chat (If "open" please use chat. I had the best experiences. Iquote from Preran: The chat button is activated as soon as there is an agent available to help.)
Hans-Günter

ColdFusion Builder lacking bug fix updates

I have to say that since the product was officially launced, we had one small update that provided a few fixes.
The question I need to ask is what about these more serious bugs that are stopping this product from being great?
There are about 30+ bugs listed on the bug tracker that have been there for over 18 months that are still major problems today, some of these I consider major and should be pushed to getting fixed as quickly as possible.
The number one pet hate of mine is wasting time with an Application that doesn't work correctly, so how does this affect ColdFusion Builder?
Lets look at setting up of servers on ColdFusion Builder, this has got to be the number one most used and needed feature of this product and yet it doesn't work and has so many reported bugs that I would have thought that these would be fixed by now.
If one is lucky, you can setup a server and start and stop this from within Builder. However I can tell you that even when you have it setup, it will stop working as well.
Lets look at what I have setup at the moment.
I have had ColdFusion 9 and 9.01 installed and still donot mange to be able to start and stop the server.
I now have a mutli server version of ColdFusion 9.01 locally, and was able to get this to work briefly. And now it no longer works, with no changes to any of the settings. Don't get me started on remote servers, these are even worser trying to get working.
And even if you do make changes to the server setup in builder, you have to close and restart the Application. This is not acceptable to me either.
I could go on about how much of a hit and miss this feature actually is.
So the question is if this a feature that people would want to buy this product, why is there no fixes for the problems that are still there after 18 months?

Yes they where, they were reported in ColdFusion 7 beta program, ColdFusion beta program and ColdFusion 9 beta program.
When it is reported that many times, and nothing is done what sort of confidence do you think this gives us users of the product?
During the ColdFusion 9 beta program, the cfgrid had many problems that had been reported in CF8 beta program and was again reported and we had been told it was fixed. Did it get released with the initial 9.0 version? No it didn't, did it get released with the 9.01 beta program? No it didn't.
Again what sort of confidence does this give people in this product?
I even fought hi and low with Adobe to get these grid problems fixed, not only did they break more things but it was not even backward compatible. Evey person I spoke to refused to fix it, becuase I did not have paid support. This even went as far as Adam, and Kevin Lynch because I got feed up with the fact that 9.0 got released and it broke our application to the point when we fixed one thing it broke another, to the point that we could not get at the source of ColdFusion to fix the problem.
Each and every time we were told there was a work around, and no work around was ever produced.
When 9.01 was released was it fixed? No it wasn't, in fact it was even worse. And the answer again from Adobe was that unless we have paid support it will not get fixed.
So Ray the answer is very simple, Adobe is not interested in providing more patches / hot fixes past the intial ones they have always released. Even it it effects people from moving upto the latest version...
I can provide many examples of emails from employees of Adobe, that say the same thing no paid support no fix. Now we have to wait another 2 years and wait to see if these problems get fixed, and to me I am sorry that is not an issue that one should have to endure. When talking to people about ColdFusion the same problems exist each and every time, the lack of support and problems that never get fixed puts people off from keeping on buying the product and they end up moving on.
I have been in two companies that began their days as ColdFusion developers, and both companies ended up moving on because of these problems I have outlined. I can understand a company like Adobe needing to make money, but at the end of the day they will continue to loose money because people will look at other options that are better supported, have more outfixes and updates.
The amount of updates that Microsoft release in 1 year is maybe like the same amount Adobe/Macromedia/Allaire have released in 15 years.
Do't take this the wrong way, but the debugger is buggy as hell. It works when it wants to and even to the point when you do get it working it actually gets slower and slower each time you run it. This has been a problem for now 6 years in this product and it has never gotten any attention, now that CF builder utilises this feature, I would have hoped that these bugs and problems got fixed. But they never did.
Every major release is about throwing new features into the product, but when it comes to issues like this do any of the previous versions that have these problems get fixed? No they don't, and even the current major release is not fixing any of these previous issues either.
The problem is one needs to draw the line, and stop putting features into a product that Adobe can't continue to support.
And till that changes people are going to continue to get rather annoyed with Adobe, and the more they get annoyed the more customers Adobe end up loosing. I don;t make my comments very lightly when I do make them, and after 15 years I have seen it all with ColdFusion and the one thing that never changes is the lack of bugs in older features that ever get fixed.
Sorry for the rant, but this is something that Adobe HAVE to address and address sooner than later. I know of 3 more companies that are moving away from ColdFusion, for more reasons than what I have outlined here.

Can't install CF Builder 2

I am trying to install the latest versin (CF Builder 2, update 2) on my iMac (2013 model, 8GB RAM, OS X 10.8) The installer launches but the intial screen is blank with only the "next" button visible. It wil not progress from there. I've tried re-booting and re-installing with not luck.
Anyone seen this? Given the lack of CF support in Dreamweaver CC, I am trying to install CFB as recommened. Needless to say, a bit frustrating! I also do not see any logs generated for the install attempt, so there is little in the way of clues to help.
Thanks in advance for any suggestions.

With the JDK that got updated through “Software Update…” that is part of MAC OS X 10.8.4 update has got issue.
Can you please download the JDK installer from http://support.apple.com/kb/DL1572 and install it to the default location.
Try installing the ColdFusion Builder now. It should be working fine.
Thanks,
Krishna

I can't install any programs is their fix?

Hi
I would like to install a divx player however when I download it, it mounts just fin, however when I double click on the .mpkg it won't do anything. I know it has to be my computer because my friend has an iMac and can do it just fine. I don't know what I did to screw it up but I can't install anything on my computer and would like to be able to. Does anyone know how to fix this?
Thanks
The Net Duck

To post a screen shot here, click the little camera icon in the reply window toolbar.
That appears to be the Installer.
If it is happening with every installer file, please try it in Safe Mode as I suggested and report back.
It may be something related to the install of OS X. I'm not a huge fan of the whole USB installer thing as it seems to be flaky. Was that created from an installer downloaded for that Mac, or for a different one?
You may need to reinstall OS X from the Recovery HD: http://support.apple.com/kb/ht4718
I don't think this is related to Gatekeeper, but Gatekeeper can be temporarily bypassed by right-clicking on the installer file and choosing Open. If Gatekeeper is blocking it, it will present a small dialog asking if you are sure. You then click Open.

Can't Install new Build

First time running Windows Technical Preview Build 9841 I was able to upgrade to Build 9860 but then during the release of Build 8979 I keep getting this error "failed to check for new preview build, please try again later. 0x80244022". I'm tried
everything from changing my time to correct and past time. Running Windows maintenance along with "Windows Update troubble shoot" and using third party software such as Advance systemcare and Jet clean.. Nothing worked so I did a reinstall and reformat
of my laptop TWICE and I'm still getting the same error. I understand that today Microsoft Server for Windows App store was having issues but I've had this issue way before this. I've also check and the app store issue seems to be fixed and I retried to install
Build 9860 on my fresh install of Build 9841. Nothing works? Any ideas?

Would you care to do a clean install by downloading build 9879 Enterprise ISO, burn it to a bootable DVD or Flash Drive and then install ?Enterprise version has everything in a non- enterprise version plus a few extra features gear towards business
people. You don't have to use them at all.
If that is acceptable, here are the links :
Windows 10 Enterprise build 9879 64-bit
ISO image
Windows 10 Enterprise build 9879 32-bit
ISO image

Installing Coldfusion Builder 2 from License Certificate

Hi,
I just got a software license certificate for CF Builder 2. How do I install it? Is there a link on Adobe to enter the license and serial number?
Thanks,
Jenn

You need only the serial number, which is printed on your certificate.
If you have bought the program in Adobe Store, Adobe creates download links for your software in your account, which should be presented in "My Orders". Your serial numers are presented there, too. Download the installer from these links and use your serial number during the installation (in fact, ColdFusion Builder requires the serial after the installation, on the 1st launch).
If you bought it from a private reseller, simply download a trial version from http://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion_builder and enter your serial number after the installation, on the first launch. There was no difference between trial and downloaded from Adobe Store installation packs.
If you are using the trial version just now, the program asks the serial during each launch. Simply enter it.

Why I can't install Flash Builder 4.6 with a Master Collection Serial Number?

Hi all,
downloaded Flash builder 4.6, i had a Master collection 5.5 suite which includes (obviously) Flash Builder 4.5,1.
I found that I can’t install the 4.6 version with the serial number of the Master Collection.
The Adobe support told me thet I can’t install the single packet but I can upgrade the entire suite of (probably) six months when the 6.0 version will becomes available.
I feel cheated.
I spent a lot of money to buy and upgrade the entire suite and now I can’t upgrade Flash Builder only.
Can you help me?
If there is not a solution I think I'll nerver upgrade the suite anymore, I'will port all of my mobile code in Objective-C and "tanti saluti".

Deeptika's answer is very helpful.
Now, this is how I activated the FB 4.6, using theMaster Collection CS 5.5 serial number:
1.- Uninstalled Flash Builder 4.5 from the MC (Select the 'Delete preferencies'- checkbox).
2.- Deleted and cleaned all program's cache with CCleaner.
3.- Installed Flash Builder 4.6 in TRIAL MODE, and -IMPORTANT!- Be sure that you are selecting the SAME LANGUAGE on wich you installed your Master Collection!!
(I had some troubles because I didn't remember that I installed the MC with "Español", and I tried to install FB 4.6 in "Español (Latinoamerica)").
4.- After a reboot of my PC, I opened Flash Builder 4.6.
5.- It asked me for a serial number, I had to wrote down my Master Collection's serial number.
6.- I was happy because my FB 4.6 serial number was accepted, (after three unsuccesful attempts because of the wrong language installation).
So, everything is about languages.
In the last case, maybe you should uninstall your entire Master Collection (including Flash Builder 4.5) and then reinstall it (without FB 4.5). Then install FB 4.6.
Yep, this is a little annoying, but now I can use the Flash Builder 4.6. It worth the work.
Let us now if you could install your FB 4.6 succesfuly.
Regards!

ERROR: DW030 Can't install Flash Builder 4.7 CC in windows 8 64 bits

Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DW030 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s) ----------- Payload: Adobe Flash Builder 4.7 4.7.0.0 {EB510B48-ACF6-43A0-8214-3DA0D6D0936F} ----------- ERROR: DW030: Custom Action for payload Adobe Flash Builder 4.7 4.7.0.0 {EB510B48-ACF6-43A0-8214-3DA0D6D0936F} returned error. Failing this payload. -------------------------------------------------------------------------------------

Now managed to get Flash Builder installed. Turns out it was my computer user name that caused the problem. I had a special character in my name ( the special character was ' ). I set up another user account without any special characters and installed Flash Builder using that user account and it installed without any problems.Hope this info helps.

Can I install coldfusion server NOT for all sites?

Tried searching on this, but didn't find any previous discussions:
Trying to install coldfusion server to an existing server running IIS7. I do NOT want coldfusion to run on all websites, only on one specific website. When I get to the point in the coldfusion server installation process where it asks me for the server type, and I tell it IIS, the drop down to choose the websites for coldfusion only has "all" as an option, which I do not want.
Is there some way to install it only to a specific site, and have it NOT install to my other sites?

Usually, the connector will list the sites you have defined. Perhaps you're using CF 9.0 without having installed the IIS 6 compatibility layer? If you upgrade to CF 9.0.1, the connector doesn't require this layer.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

Can't Install ColdFusion Builder 2 Hot Fix

Similar Messages

Maybe you are looking for