Can't install Color or Motion

Just installed Final Cut Studio but can't get Motion or Color on. I've used all the discs and no joy. I don't have a disc with Color on it which worries me. Tried to install from the Motion disc separately and it said successful install but couldn't find it on the system.
Please help...

Both the Color and Motion apps are installed from the 1st disk, ( Color may have installed; look in your applications folder for it) in fact all of the actual applications are installed from that 1st disk... the motion disk just installs the templates...
What is the spec of your graphics? If they don't meet the minimum as posted in the specs of Studio, Motion won't install, because it relies heavily on your graphics processor.
The spec for Motion is: A standard or built-to-order system configuration with a ATI Radeon 9600, 9700, 9800, X800, X1600, X1900, or X2600 class graphic card.
But that all said, didn't you check on all of the installs from that first disk? You can select them to install or not...if you don't see color or motion, then try installing them again from that first disk.
Jerry
Message was edited by: Jerry Hofmann

Similar Messages

Can't install Color Laserjet Pro MFP M177fw

I'm having trouble installing the drivers for my new Color Laserjet Pro MFP M177fw AIO printer. I'm using a Sony Vaio VPCX118LG running Windows 7. I initially successfully installed the software from the disk provided some weeks ago, and had the printer running satisfactorily. About 3 weeks ago, I attempted unsuccessfully to install Office 2013 on the 32 system, and finally gave up trying and went back to Office 2010. Since about that time, I've been unable to use either of my M177s (I have two printers in my two offices in different cities; the one in Sydnay is working fine with my HP Pavilion desktop up there, but now won't work with my laptop, as won't the other identical printer in Canberra). I've tried uninstalling the software (using the Uninstall utility on the disk provided with the printer) and reinstalling. The install process seems to be proceeding normally but at about 99% complete stops with a message about a "Fatal Error". When monitoring the process using the Windows dialogue, the failure appears to coincide withthe installation of the last driver (after the Scan, Fax, USB Printer, etc...the one called, "HP Color Laserjet Pro MFP m177fw"). I've tried downloading the installation files and drivers from the HP website and installing from the disk provided, but neither method works. Can someone there offer any help, please? Claude

Hi , I think it's time to take the proverbial gloves off. I suggest you try a selective start up on your PC working directly with MSCONFIG to try and determine what, if any Windows service or program is interfering with your ability to install the drivers. Here's how: Click on the Start menuIn the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Selective Startup' and uncheck Load Startup ItemsClick the Services tab. Check the box at the bottom for Hide All Microsoft ServicesSelect Disable AllSelect Apply and OKRestart your computer when promptedAfter you reboot, try the install again. If you're able to finish the setup we can safely assume there is a background program or service on your computer blocking the install. You will need to enable one service at a time on your computer to locate the program that's blocking your printer from printing. Here's how to undo the above-noted MSCONFIG steps: Click the Start icon.In the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Normal Startup'Click Apply and OKRestart your computer as prompted. If this approach falls short I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. Best of luck,

Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!

Sean L. wrote:
I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!
The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
Printer on, and if networked, use a static IP address
Print & Scan
IP
Provide printer static IP address
Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
Add
Configure Driver under Options and Supplies
I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
Hopefully, you have already sorted this out.

How can I install gutenprint drivers for my Epson Stylus Color 440?

Good day all!
I have and old and useful printer -Epson Stylus Color 440- and just bougth a cable for connecting it to USB port. Add a new print on its Print and Scan Preference Panel and it was recognized inmediatly, but I was told there was not any driver to that printer.
Tried to set "Epson Stylus Color Series" on its driver but when I went to print, printer seemed to work but does not eject any ink. It seemed as if I were ran out of ink; its car moved over the places occupied by the photo and sounded as normal printing, but not a drop of ink. I checked on an older windows pc, and ink is full, printed normally. I also looked for its drivers on Epson pages, but it seems there are only available for previos Mac OSs, not for X.
A son told me that in his Snow Leopard MacBook White there's a dirver called "Epson Stylus Color 440 gutenprint" on his Print and Scan Driver Menu; haven't tried to print from his MacBook yet, and as I searched, those are open drivers.
I wonder if I can download and install that "Epson Stylus Color 440 gutenprint" from the web, of if there's a way to copy it from my son's Macbook, when he comes and check.
Thanks in advance for your help.

How can I install gutenprint drivers for my Epson Stylus Color 440
Download then isntall: http://gimp-print.sourceforge.net/

Where can I download Color Finesse and how I can install them with Premier Pro or After Affect ?

I recently purchased master collection 5 DVD version. On DVD box I have three serial numbers: Master collection, Ppro/AE CS4 32 Bit and Color Finesse. I used Master collection serial to activate my product. I am having 64 bit os, so I did not use Ppro/AE CS4 32 Bit serial. My question is about Color Finesse Serial. I searched about it and found it as an Plug-in for Premiere Pro or After Affect. Now where can I download Color Finesse and how I can install them with Premier Pro or After Affect?

This serial is only required for the CS4 version. The CS5 version does not require an extra serial. Both versions are installed automatically with the main programs. Nothing more to do.
Mylenium

Color ( or motion) on second computer - different mac than Final Cut

Hi,
is there a way to install e.g. color or motion on a second computer and have Final Cut Pro send the clip/clips there for grading and back?
Or does the 'send to color' only work for 1 mac?
Thanks,
Robert
FCS2 in intel Macbook Pro Mac OS X (10.4.6)

"Send to Color" automates an xml path inherited from Final Touch. In theory, you should be able to Send to Color on your local machine to create the Color project, then transfer it to another machine as long as your media drives are mounted over the network. "Send to FCP" should still work when transferred back to your edit machine. Of course you'll need a licence for each, unless the drives are physically detachable. Not sure of the legalities of running FCP on one machine and Color on another with a single licence - in theory, you're not doubling up but I bet it won't let you.
FT/Color uses Unix symlinks, not aliases, and you can cheat it to provide file paths to drives that have vanished if you need to revisit projects where media has moved.

How can you install FCS 3 on a computer that already has FCPX?

Ok so, I wiped my computer to install Lion, and then installed FCP X. I now want to install Final Cut Studio 3, but it won't let me install Final Cut, Motion, or Compressor (the other apps install fine). Presumably this is because I have downloaded the new versions of those respective apps from the app store.
I know you can install FCP X on a computer with FCS3 on it (and still be able to use both versions of FCP) but can you do the opposite? If so I haven't found out how (short of installing on a different disk/partition of course). I tried moving FCPX out of the applications folder (in hopes that it was as simple as the installer checks the apps folder first for another copy of Final Cut) but that simply moved an alias and as far as I can tell, FCPX cannot be moved out of the applications folder.
Anyone have any ideas or experienced something similar?
Thanks!

Hey Brad thanks, but the link you provided is the opposite of what I need. That link is for if you want to install FCPX on a system with FCS 3 already on it. I have FCP X already installed and need to install FCS 3 on the same drive.
I cannot move the FCPX, Motion 5, or Compressor 4 applications to a new folder, because when I do it only moves an alias over for some reason (not the actual application).
@Ronnie yes I know I can install another copy of OSX on another drive/partition and install FCS 3 on that, but I am trying to not have to do that. Clearly FCPX and FCS 3 can exist on the same partition if you install FCS 3 first, so why can't I do it if I already have FCPX installed? Seems silly. I also do not want to have to reboot each time I want to go into FCS3, not to mention all of the disk space I would lose by installing the OS on one of my other internal drive (which currently are all filled with Media drives, so I would have to repartition a sizable chunk of one of them just for FC Studio).

LaserJet 2550n network printer on XP host PC, can't install Windows 7 client laptop

Have Color LaserJet 2550n network printer connected to XP host PC. I can't install Windows 7 client laptop for printer. The wireless network is fine, I can access documents back and forth, merely the printer doesn't work and there's no way to download 64bit drivers for this printer from HP.

Resolved, not solved.
I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

How many Sapphire Sapphire RADEON R9 270X can i install in my mac pro 2009?

How many of the graphics cards can I install in my mac pro 2009? Sapphire Sapphire RADEON R9 270X
Thanks

Why? do you use FCP-X? that will benefit from two. Also gaming in Windows where you can use Crossfire
You have two 6-pin power feeds so you will need a small 450W PSU - those come with two 8-pin and two 6-pin.
Those can often fit in the optical drive bay and cost $25-75 range.
"500W" is NOT for the card! that is the minimum PC PSU only!
when buying look for card that uses only two 6-pin and not an 8-pin power.
75W for the PCIe slot, and 150W from two 6-pin cables, most GPUs fall into the 200-250W at maximum stress levels8-pin is basically two 6-pins and 150W feed
> we CrossFired a pair of Radeon R9 270s in our 2010 Mac Pro tower. Under Windows 7 64bit Ultimate, it registered 145 FPS in the Diablo test.
http://barefeats.com/tube06.html
Keep in mind that the Mac Pro tower can't feed enough power to the dual 980s, dual 290Xs, or dual 7950s.
We used an auxillary power supply to compensate.
For the hard core GPU rendering, there are external expansion boxes with their own power supplies.
In an earlier article, we featured the Cubix Xpander which facilitated the connection of 5 GPUs to the Mac Pro tower.
If you favor an AMD GPU like the Radeon R9 290X, MacVidCards can modify it to run at PCIe 2.0 bandwidth in your Mac Pro tower.
The Sapphire Radeon R9 7950 Mac Edition is available from OWC and TransIntl.
February 6th, 2015 -- Dual GeForce GTX 980s vs other Dual GPUs running multi-gpu 'aware' apps
February 6th, 2014 -- (UPDATE) GeForce GTX 980 GPU versus 8 other GPUs running Games and OpenGL Benchmarks
January 29th, 2015 -- GeForce GTX 980 vs 9 other GPUs running Resolve, LuxMark, and Octane Render
December 28th, 2013 -- Does Final Cut Pro X 10.1 render faster on Mac Pro towers with Dual AMD GPUs? What about Motion 5.1?
Things to keep in mind:
The Radeon R9 280X we used was 'un-flashed.' It booted OS X fine but there was no startup screen. Also, when we checked the speed of CPU-to-PCIe-to-CPU communication, it appeared to be running in PCIe 1.0 mode instead of PCIe 2.0. However, unless the GPU intensive app saturates the PCIe 1.0 bandwidth, it will not run any faster in PCIe 2.0 mode. http://barefeats.com/tube12.html
Which is one reason why you might want to buy pre-modified cards from http://www.macvidcards.com

Can I install Tiger in a Dual 500 MHz PowerPC G4?

Can I install Tiger in a Dual 500 MHz PowerPC G4, or is it better to stick with 10.3.9? I'm having some problems so I was going to wipe he hard drive and re-build everything from scratch o I was wondering if migrating to OS X 10.4.9 is worthwhile or even compatible with this PCU. Thanks.

Yes you can run 10.4 on your dual 500, I have a dual 450 (I overclocked it to 550...) and it runs pretty fast. You need a minimum 192 MB of RAM to install it and a minimum 128 MB of RAM to run it. I would suggest having at least 512 MB of RAM when running 10.4.
What problems are you experiencing? If it's just lagging and seeming slow it may just be worthwhile to clean some temp files and clean up your disk. IMHO, 10.4 is a much better system than 10.3, and runs much smoother. I can guarantee you that your system will run much smoother if you wipe the disk clean and put a fresh install of 10.4 on there, and also get a decent amount of RAM in there. After I upgraded my RAM to 1.5 GB, I noticed a substantial difference in speed, and got a lot less spinning color wheels. But one thing that you need to always keep in mind is to KEEP YOUR DISK CLEAN!!! Clean the temp files often and limit your internet downloading. If you keep your computer on all of the time, restart it every once in a while. There's a lot of little things you can do to increase speed in OS 10.4. Use spotlight and recent applications. Fill up your dock. Don't clutter the desktop, etc. There's plenty of articles on the net to help increase speed without adding anything else to your system, just navigating through the OS differently.

I can't install any adobe app on my macbook pro

Hi everybody:
I uninstalled all Adobe Products on my mac with Clean My mac and now i can't install them again.
I've tried everything, from Adobe CC cleaner to forums but nothing.
I tried to uninstall them with the uninstallers that were on my utilities folder but they disappear.
The installer program freezes, and stops at 70%, then i just see a window that says that the installer couldn't start, and it drives me to Adobe Support Advisor, which doesn't exist.
(I have the trial versions on .dmg but i can't install them)
Could you help me?
This is the info:
Hardware Information:
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:24:1
Disk Information:
FUJITSU MJA2250BH FFS G1 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
MAC HD (disk0s2) / [Startup]: 249.2 GB (153.28 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files:
/etc/hosts - Count: 20
Gatekeeper:
Anywhere
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
Launch Agents:
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents:
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items:
iTunesHelper
Vista Previa
Google Drive
Dropbox
Google Chrome
Internet Plug-ins:
googletalkbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 65 Check version
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Java Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
      4% Safari
      2% WindowServer
      1% coreaudiod
      1% iTunes
      1% cookied
Top Processes by Memory:
156 MB com.apple.IconServicesAgent
147 MB iTunes
127 MB Google Chrome
115 MB Finder
98 MB Skype
Virtual Memory Information:
220 MB Free RAM
1.66 GB Active RAM
1.46 GB Inactive RAM
419 MB Wired RAM
769 MB Page-ins
0 B Page-outs

Just an agreement with Csound1 - you need to begin again anew (is that repetitious?).
CleanMyMac has obviously made the installation of Adobe products impossible. Which products, specifically, are you trying to install and which versions? You should ALWAYS use the provided Adobe Uninstallers to uninstall an Adobe product. Kind of pointless information at this time, I know, but just as a reminder for 'next time,' when you surely will no longer be using CleanMyMac.
Clinton

Can't install software on my Mac OS X 10.9.4

Hello everyone,
I seem to have a problem installing new software... For some reason I can't install anything, the installer opens and I follow every step, but in the installation step, the bar just keeps moving but never actually moves as in completing the bar... I tried update from the app store and I can't, I press on update and it stays selected but nothing happens... I tried manually install 10.9.5, no luck, I tried with other softwares like, Teamviewer (which i really need to install), and Java.. but all is the same in all of them.
Can someone please help me? I need my computer for school and work and this can't happen ... :s
I'll be happy to send anyone images of the problem if I wasn't as clear as I wanted to be lol
English is not my main language
Thanks in advance,
Ricardo Santos

This is the report from http://www.etresoft.com/etrecheck
EtreCheck version: 1.9.15 (52)
Report generated 30 de Setembro de 2014 às 08:27:09 WEST
Hardware Information: ?
MacBook Air (13-inch, Late 2010) (Verified)
MacBook Air - model: MacBookAir3,2
1 1.86 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 8:14:9
Disk Information: ?
APPLE SSD TS256C disk0 : (251 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 205,14 GB (12,77 GB free) (Low!)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 45 GB (1,59 GB free)
USB Information: ?
Apple Inc. FaceTime Camera (Built-in)
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files: ?
/etc/hosts - Count: 15
Gatekeeper: ?
Anywhere
Startup Items: ?
MATLABLmgr: Path: /Library/StartupItems/MATLABLmgr
Problem System Launch Daemons: ?
[failed] com.apple.installd.plist
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.siber.gs-server.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] com.paragon.updater.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents: ?
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Dropbox
SpeechSynthesisServer
HPEventHandler
Internet Plug-ins: ?
JavaAppletPlugin: Version: Java 7 Update 60 Check version
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
Safari Extensions: ?
AdBlock-2
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
Picasa: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ?
Flash Player Support
Growl Support
Java Support
Tuxera NTFS Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 191.05 GB Disk used: 179.16 GB
Destinations:
Time Machine [Local] (Last used)
Total size: 465.66 GB
Total number of backups: 4
Oldest backup: 2014-08-29 11:05:22 +0000
Last backup: 2014-09-21 21:27:51 +0000
Size of backup disk: Too small
Backup size 465.66 GB < (Disk used 179.16 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      6% WindowServer
      4% Dropbox
      2% Installer
      0% fontd
      0% System Events
Top Processes by Memory: ?
98 MB Safari
53 MB Finder
39 MB WindowServer
35 MB Console
31 MB Installer
Virtual Memory Information: ?
32 MB Free RAM
588 MB Active RAM
559 MB Inactive RAM
329 MB Wired RAM
1.13 GB Page-ins
15 MB Page-outs
I'll also take a look at them but today it's a busy day without the computer, I'll come back later.
Thanks again

Is it possible to only install Color from the FCS3 suite?

Is it possible to only install Color from the FCS3 suite? If so, what is the correct procedure?
thanks

I'm not sure whether you can install it on its own or whether you will need FCP as well.
Open the installer, go through it and you will come to a page where every app and its media is listed.
Deselect everything except Color and continue with the installation.
If it refuses you will have to go back and select FCP as well.

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I brought I pad air 3 months ago, but recently I can't install any application and can't make an update. Even I can't install the free application. I can see ... There is a previous purchase problem please Singh up your bank information again. Plz help

Hi , I brought an I pad air 3 months ago. But recently I can't install any application and can't update any application. Even I can't install any free application. I can see one dialogue box about in red colors " there is a previous purchase problem please type your bank information correctly" . So I don't know what to do please help me. Thanks

The message implies that a previous purchase may not have been paid-for due to problems collecting the money from your account. Have you tried logging into your account and updating/changing your payment details (tap on your in Settings > iTunes & App Store on your iPad and tap 'view Apple id' on the popup and sign into it) ? Until there is an accepted payment method on your account (credit card, redeemed iTunes gift cards) and what you owe has been paid then you won't be able to download anything (including app updates).

Can't install Color or Motion

Similar Messages

Maybe you are looking for