Can't install Desktop Software properly with out Error 1406

Hello All,
I am running Win 7. Just can't seem to get the desktop software installed witout the Error 1406 coming up. I have tried doing a clean uninstall a few times but still can't get done.
I have no trouble with getting it done in XP on my other compters!
Here's the full Error messege;
Could not write value discription to key \Software\MozillaPlugins\@Rim.com/webSLLauncher,
version =1.0. Verify that you have sufficient access to that key or contact your support personnel.
Solved!
Go to Solution.

Hi there!
I agree...a full start over is in order. And, for your easier reference, here is the procedure that I give out.
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
Some have reported that there are more registry keys to remove than are discussed in that KB
Others have reported the use of a registry cleansing tool to also be helpful
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Can't install desktop software--error message

When I first tried to install the desktop software from the disk that came with my phone, something went wrong and the installation was incomplete. I am unable to uninstall and start over, however, because when I open the Add or Remove Programs feature in the control panel, no blackberry software comes up as an option to remove.
When I try to initiate the intallation process again (whether by disk or by download), I get the following error message in a box that says "InstallShield" at the upper left:
An error occurred while downloading the file http://saturn.installshield.com/is/prerequisites/microsoft.net framework 2.0 sp1.prq. What would you like to do?
I then have the option to retry or cancel. If I hit retry, I get the same message. If I hit cancel, I get the message:
An error occurred while downloading the file http://download.microsoft.com/download/0/8/c/08c19fa4-4c4f4ffb-9d6c-150906578c9e/NetFx20SP1_x86.exe. What would you like to do?
Again, I have to option to retry or cancel. If I hit cancel, I get the message:
The files for installation requirement Nicrosoft .NET Framework 2.0 SP1 could not be found. The installation will now stop. This is probably due to a failed, or canceled download.
This time, I can click Yes or No.
Any suggestions how I can get the desktop software installed onto my computer?
Thanks!
Annie

Yes Microsoft removed it from their site, that's why I linked to the other site where you can download it from.
In the past if the clean uninstall steps for the Desktop Manager didn't work, than the windows utility always did the trick
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Can't install desktop software

Hi
I have the Palm IIIc and am trying to install the contents of the CD (desktop software) that came with my orginizer unfortunately there seems to be two problems when I start installing the contents of the CD:
1: It says in a dialog box(titleetup:Macro installation error)
"An error occured while installing one or more of the macros used by the Palm Desktop software.
Microsoft Word macro error.
Unable to write to directory; application my be running. Macro will be to the Palm Desktop directory.
Microsoft Excel macro error.
Unable to write to directory; application my be running. Macro will be to the Palm Desktop directory.
Press next to continue with installation. Or press cancel to exit Setup; then close Microsoft Word and Excel and run setup again.
Refer to readme.txt for more information."
Well, the thing is that i am positve that i am not running any of those programs.
2: When I click next after the first problem appears another dialog box(title:Component Transfer error) appears and says:
"Component: Disk<1>
File group: < Disk1>Disk1 files(1)
File: C:\Program Files\InstallSheild Installation Information\{BA0F-44C2-A883-11D1-AD0A-006097D15E2C}\
Error: Acess is denied
So what i would like to know is what to do in this situation to complete the installation.
Post relates to: Palm IIIc
Message Edited by alite on 07-15-2008 06:49 PM

What operating system are you using on your computer? Is it even a Windows machine??
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How can I do a clean install of Snow Leopard with out losing iLife applications?

I bought my Macbook pro in 2009 and am currently running the Leopard software. I want to do a clean install of Snow Leopard, but I do not want to lose my iLife applications. I lost the DVD's that came with the computer. Is there any way I can do a clean install of Snow Leopard with out losing my iLife applications?
Will a regular installation of Snow Leopard allow the App store to recognize that my computer has iLife and mark it as a purchased item in my account. If it can, then would I be able to do a clean install and re-download the apps for free.
Any help would be appreciated!

1. Install Snow Leopard normally; this will keep the applications intact. An actual clean installation involves either erasing the partition or creating a blank one, and neither of those will carry the applications over.
2. The previous iLife installation won't carry over to the Mac App Store, and the Mac App Store versions are incompatible with Snow Leopard.
(97485)

HT5306 I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? compatibility issues with wh

Hello:
Thank you for the update for remote access for desktops.
Personally, I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? I do use this lap top in other countries. compatibility issues with what?

Apple Remote Desktop is off be default. It has to be enabled for some one to be able to remotely connect to the computer. And then, you still have to have a user name and password on the computer to remotely connect with.
If you want to see if remote access has is enabled for Apple Remote Desktop; you can find the setting in, Apple Menu, System Prefrences, Sharing. If it's enabled, Remote Management or Screen Sharing will be checked.
Beucase Apple Remote Desktop Agent is part of the Mac Operating System; even if your not using it, Apple Software Updates will from time to time offer updates for ARD Agent. Software Updates can some times be stacked ontop of each other; so chosing not to install an update, can mean other updates you may want may not be offered. At least until you install the updates those updates require. Also software updates can improve the security of your computer.

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

When I try to install Windows on iMac with Bootcamp I get this message,"Can't install the software because it is not currently available from the Software Update server."

I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.

I have that problem too. There's many other discussion threads as well. Either Apple doesn't realize they have a problem, or they do and simply don't care. Either way, not good.
There is a workaround that I'm going to try next. Go to this webpage:
http://support.apple.com/kb/HT5634
Scroll down to the middle of the webpage. Hit "Expand All". Now, search the webpage for the Apple product name of your computer. It should be something like "MacBook Pro, 17-inch, Early 2008". If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit). Hopefully you'll find a "4" or "5" there. Click on that number, to go to the download page for the drivers that you need. If you just see an empty box there, then you're out of luck....
Hopefully there will be drivers. Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32). Use Disk Utility to format your USB stick if necessary. Now, you have the drivers you should have gotten from the Boot Camp Assistant download. You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
Hope it works!
Josh

How can i install another software with yum? No repo!

Hi
How can i install another software with yum? I can't find any softwarerepo. */etc/yum.repos.d/* is empty. Sorry I do not understand this. And update also not working.
And the other thing is the Managementtool: https://myhost:5989_
The website can not process the request. HTTP Error 501 (Not Implemented): The server does not have the necessary functions to process the request.
What must i do that this things work?
Thanks and Greetings
tux007

909396 wrote:
How can i install another software with yum? I can't find any softwarerepo. */etc/yum.repos.d/* is empty. Sorry I do not understand this. And update also not working. If you don't have Oracle Linux support, you can use our public Yum repository. Instructions for setting this up can be found at http://public-yum.oracle.com.
If you do have Oracle Support, follow the instructions at http://linux.oracle.com to register your server with the Unbreakable Linux Network for updates.

How many computers can I install the software on

how many computers can I install the software on?

Yes, you can use Creative Cloud desktop applications on two computers at once, regardless of operating system, for the individual associated with the Creative Cloud membership.
Please refer the below link : http://www.adobe.com/products/creativecloud/faq.html

Boot camp assistant: Can't install the software because it is not currently available from the Software Update server.

Error: Boot camp assistant: Can't install the software because it is not currently available from the Software Update server.
OS 10.9.1
iMac 27-inch, Late 2009
Boot Camp Assistant Version 5.1.0 (473)
Every time I run this I get the above error after I hit "Continue" on the "Save Windows Support Software" page and subsequently hit "Download Windows 7 Support Software."
How do I successfully install 64 bit WIndows 7 on my iMac?
Thank you!

Waited a month and tried again with the same result. What gives? Does Apple no longer support Bootcamp with Windows 7? Do they not read these posts and help out customers? If Apple doesn't care and won't help, can anyone else suggest something? My large company does not like Apple and barely supports those of us who buck the trend and buy Macs. If I have to buy a PC to support their software to work from home this only gives them more "ammunition" to decline to support Macs. Any advice anyone can give would be greatly appreciated!

Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server.

I'm trying to setup my Canon MX870 USB ink jet printer plugged into my Airport Extreme's USB port. However, I keep getting a message of; "Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server." And then I have to click cancel.
The "Print & Scan" from System Preferences, can see the printer as it has the NAME: Canon MX870 series, and the LOCATION: 'the name of my network', and USE: MX870 series. But after clicking "Add", it tries to install the software (I've already installed the latest drivers however on my Mac Pro) and that's when I get this message;
"Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server."
Any ideas, help would be greatly appreciated!
Marty

Hello Marty,
It sounds like you are not able to add your Canon printer in System Preferences. I found an article with steps you can take to resolve this:
Resolution
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Cannot install Desktop Software

Hello,
I just bought a blackberry 9700. I cannot install desktop software on my computer!!!
I receive a “DEP – (Data Execution Prevention) error.” And then, automatically close.
I use Windows Xp.
Anyone can help me??
Thanks

Hi,
Try running the software CD first then take the CD out and reboot your computer
after reinsert the CD and restart installing again
It should work then.....

Synchronizing 8830 using previously installed Desktop Software

I have 8830 and a Curve. I have installed the Desktop Software that came with the Curve. When I tried to install the software that came with 8830, I received an error message and I can't install it. Neither am I able to sync 8830 with the current Desktop Software.
Since I need to use both the Curve and 8830, how do I go about synchronizing both devices using the same Desktop Software?
Thank you

The error message is "no applications configured for synchronization".

Installing desktop software fails

When installing desktop software version 4.7 from disc or net, the install starts - asks you which language you would like, the comes up with the wizard was interrupted before software could be installed.....
have tried various versions same result...
can someone please help as i need to remove ticketmaster app which only works in america... not much good in uk
Cheers

I'm having the exact same problem going from treo 600 verizon to centro att and windows vista. the first install failed just like the above user, redid it and received no option to import data. Tried the suggested reinstall from the downloaded version and got the import option this time, but nothing shows up on the desktop, no old data, nothing.
I notice in the data folders on my computer that the old file type are there, as well as the new types, with considerably smaller sizes, no doubt because there's no data in them. Looks like the new desktop is simply saving the old files, but did not actually convert them.
I can't believe more people don't have this problem. I found one other similar post from a 650 user. someone suggested synching the old treo with the new desktop. i tried that too, but still no data appears (no error message either).
Any help would be appreciated.
Post relates to: Centro (AT&T)

Can't install the software

HelloI bought today the WD EX2 6T then i went to install the software but i cant install it properly in step 1 when it's say select your WD EX2 when i press next it's freeze press next several times but nothing change I don't know why try to reconnect the device but unfortunly can't install the software so please help methank you

Hi there and welcome to the WD community.
What operating system are you using on your computer? If you are using windows then try to run the software as an administrator see if this helps out.

Can't install Desktop Software properly with out Error 1406

Similar Messages

Maybe you are looking for