Can't install driver for HP laserjet p1102w

I have a HP laserjet p1102w installed on my network wirelessly. It was working fine, but then I had to set up the network anew.
Now I can't get it to work on one of our macbooks. The other one works fine, they both run 10.7.5
I tried to remove the printer from the list and install the driver again from scratch. I downloaded the newest driver from HP, installed it, and upgraded the printer firmware (using the other laptop). When i click the + in the printer list, the printer shows up, and then i get the message to configure it, saying that the software is available from Apple. It seems to download, and then says the software is not available at this point, telling me to get the newest software from the printer manufacturer. Which is what I did in the first place.
I tried this several times, also tried repairing permissions, that didn't help.
Does anyone have any ideas? Would greatly appreciate help, have spent a few hours trying to figure this out to no avail.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
-Griff W.

Similar Messages

Install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite

install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite V 10.10.1 (I have the disk but it doesn't load the driver)

Hi @Peggysguy ,
I see that you are having issues installing the printer on Yosemite. I will certainly do my best to help you.
The CD won't support Yosemite. You just need the newest drivers to install.
I have provided you with the downloaded Full Software drivers for the Laserjet Pro CP1525nw.
HP LaserJet Professional CP1525 Color Printer Series Full Software Solution.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

Hi,
I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
The printer works fine on my other laptop with Vista on it. Help!

Hi peshi77,
Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
Once downloaded, please follow the on screen instructions. I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Vista 64bit can't find driver for networked Laserjet 3390.

I originally posted the following in the wrong section so I posted a retraction there and am reposting in this networking section. ===== I have an all-in-one Laserjet 3390 printer. It's connected to my WinXP Pro PC via USB and works fine as a printer. I don't use the scanner since I have a Canonon scanner that I use. I bought a Dell Studio 1537 laptop that came with Vista Home Premium 64bit installed. I networked the laptop to the WinXP PC via ethernet cables and a Belkin router. I can transfer files between both PCs with no problems. Now I'm trying to print on the 3390 from the Laptop. When using the Vista laptop, I can see the 3390 on the network. But when I try to connect to it, a window pops up saying: ***** The server for the 'HP LaserJet 3390 Series PCL6' printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver.***** So I selected Vista 64bit on the HP website and downloaded the Universal Print Driver HPUPD47PCL664.exe. Unzipped that file in a folder on the Vista laptop. Then connected to the 3390 printer again from the Vista laptop as I did before and when the pop up occured, I browsed to the folder that contains the unzipped UPD driver. I see several .inf files which is what the install program wants but when I click OK, a pop up says: ***** Windows cannot locate a suitable printer driver. Contact your administrator for help locating and installing a suitable driver. ***** Any ideas?
This question was solved.
View Solution.

mrlaw10, You do not need the HP software since your printer is already on the network.
First, do a Windows Update. Next,
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Devices and Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select HP or Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cannot install driver for HP Laserjet 1022 Printer.

I am running Windows 7 64 bit. When I attempt to install the driver for the HP Laserjet 1022 Printer, although the software recognized that the printer existed (ergo must be plugged into the computer), I keep getting the message that installation is being held up until I connect the printer to the computer. Any suggestions?
Thank you

Hi mtnkeena2,
Use a different USB cable to see if the computer can then see the printer.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

My pc on windows vista can not install driver for my Iphone 4s on 6.0.1

I can do everything in itunes but the windows driver can not be installed.

I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142).
I too have contacted Logitech for support and am awaiting a reply.
Can we get some help over here?

Can't install driver for my ATI Radeon 9800 XT VGA card!

Hello:
I own a computer with these specs:
Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
Computer:
Computer Type ACPI Uniprocessor PC
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
Internet Explorer 7.0.5730.11 (IE 7.0)
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2400 MHz (18 x 133)
Motherboard Name MSI 845E Max (MS-6566E) (6 PCI, 1 AGP, 1 CNR, 2 DDR DIMM)
Motherboard Chipset Intel Brookdale i845E
System Memory 512 MB (PC2100 DDR SDRAM)
DIMM1 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
DIMM2 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
BIOS Type AMI (09/13/04)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter RADEON 9800 XT - Secondary (256 MB)
Video Adapter RADEON 9800 XT - Secondary (256 MB)
3D Accelerator ATI Radeon 9800 XT (R360)
Monitor LG F900B [19" CRT] (121137790)
Multimedia:
Audio Adapter Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [A-1]
Storage:
IDE Controller Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Floppy Drive Floppy disk drive
Disk Drive IC35L060AVV207-0 (60 GB, 7200 RPM, Ultra-ATA/100)
Optical Drive SAMSUNG CD-R/RW SW-252S (52x/32x/52x CD-RW)
Optical Drive TEAC DVD+RW DV-W58E (DVD:8x/4x/12x, CD:32x/16x/40x DVD+RW)
SMART Hard Disks Status OK
I just replaced my old graphics card NVIDIA GeForce2 MX/MX 400 with another old model card, ATI Radeon 9800 XT. Everything was fine until I tried to update a recent ATI driver after uninstalling my old Nvidia driver with DriverCleaner Pro. I get this error message:
"Setup failed to launch installation engine: Class not registered"
Then, tried to install the driver through device manager with the update driver option. I directed to the driver folder on my desktop and the driver update went through, smoothly. However, when I put my computer in standby mode and then restore to full operation
I got a BSOD with this error msg.:
ati2dvag.dll-Address BF039614 base at BF012000, DateStamp 49344e53
Now I can't use standby mode because the computer just shuts down instead of operating in standby.
Is there any idea why my new card is not being fully accepted in my OS and how can I fix this issue. BTW, my ATI card is an 8x speed and my AGP slot supports a max of 4x speed, but I think my card is reverse compatible with 4x slot with the same voltage (1.5V).

Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!!

Can not install driver for my USB E-MU interface sound card

I have iMac mid 2011

Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!!

How can I install driver for Dymo Labelwriter 330 in Mountain Lion? Which current labelwriter models work with ML?

Installation hangs every time with 6 items remaining. I an considering buying a newer model of Dymo: which models will work with ML?
Lou

According to the Dymo Technical Support page for that model:
MACINTOSH
DYMO Label Software version 8.4.1
New In This Release:
- Latest version of DYMO Label™ software - Free download
- QR and PDF options have been added to the available barcode list.
- Minor bugs were fixed.
- Support for Mac OS® v10.8 Mountain Lion
Have you installed the driver version 8.4.1 as mentioned above?
Hope this helps

Can not install driver for Creative Soundblaster Audigy 2

Hello
I excuse myself for my unworthy english.
I disabled motherboard audio in Bios before installation and before putting soundcard in
It says that i can not find any soundcard
but when i search for audio? drivers in thedevice manager(correct word for it's)
it copies some files and audio works
the sound card is listed in dxdiag but in games i have bad performance
My system:
Windows XP Professional(directly after installing windows i installed SP2 then SP3)
Direct X 9.0c
Intel Pentium 4? 3 Gh
Gigabyte GA-8G000MK
2 GB DDR ram
?Nvidia 6200 256 MB
Soundblaster Audigy 2 ZS
My system is completely new.
Directly after installing windows(on formated partition)
i installed SP2 then SP3
then i installed Motherboard drivers
then i installed graphic drivers
then i installed antivirus drivers
then i installed wireless lan drivers
then i tried to install audigy 2 ZS drivers.i tried from CD and newest.Both didnt work
i disabled antivirus before installation attempt
i would be happy about help
Only one cable is used from CD-rom to soundcard:? CD-in
no other cable..buti was able to install long ago
Message Edited by ignaz on 08-2-2008 09:27 AMMessage Edited by ignaz on 08-2-2008 0:36 AM

Your welcome try my pax drivers that might slove your issue

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7?

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7 64bit? It must be the Windows 7 driver of Scanto.msi. Thank you for your support.
This question was solved.
View Solution.

Hi,
Unfortunately any HP Software component (HP Toolbox, HP Scan, etc.) for this product support 32-bit envoirnment only.
As you may find by the User Guide, only basic Print and Scan drivers provided for 64-bit (Page 14):
http://h10032.www1.hp.com/ctg/Manual/c01072750.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

The print driver for HP Laserjet 3380 that was print only was removed from my iMac, and now when try to download driver, it states to contact manufacturer. I have old driver on Time Machine, can I reinstall that old driver that worked?

The print driver for HP Laserjet 3380 was for print only, was removed and when I went to download from apple, it stated to contact manufacturer. I have old driver in Time Machine, how do I reinstall from Time Machine that driver that worked?

Hi,
Trible post. Please use:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-solution-center/m-p/4790405
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

Hey Stella,
Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189
All the best,
David

Scan driver for HP LaserJet 1536dnf MFP

Hi! Could anybody provide a driver for HP LaserJet 1536dnf MFP for scanning that it really work?

Hi! Unfortunately Your advice does not work. I have downloaded the full feature software Your dirrected, however I can not install it. I run the full feature software hp_M1530_MFP_full_Solution_usb_n_w.exe (find enclosed picture 1.jpg, please). It reaches 99 % of installation (2.jpg) after 14 minutes. Further after 3 min. I get an error message (3.jpg) “An install operation took too long to execute. This a fatal error preventing product use. Please restart your computer, and run this installer again”. After restart of computer, I get a message “Installing device driver software” (4.jpg) and “Your device is ready to use” (5.jpg). Despite that, the scanner does not work, and there are some dysfunction’s with the printing. We have two such printers, and both encountering with this problem. Could you help, please?

HP Toolbox FX Software and Driver for HP LaserJet 3052

Dear Sir,
I have lost my software driver for HP LaserJet 3052, currently I am using the printer (HP LaserJet 3052) with driver downloded from HP website. However, many features have dissappered. I can no longer able to print both side.
Where can I download the HP LaserJet 3052 driver software with fully features?
Where can I have HP LaserJet 3052 Toolbox software?
Thank you verry much.

Hi,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
The HP Toolbox FX ( as part of a Full Feature Software) is not compatible with Windows 7 but only a UPD solution, full functionality is only available uisng compatibility mode with the Windows Vista software but for a 32-bit OS only, not for a 64-bit OS:
http://h20566.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02096212
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't install driver for HP laserjet p1102w

Similar Messages

Maybe you are looking for