Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

Hi,
I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
The printer works fine on my other laptop with Vista on it. Help!

Hi peshi77,
Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
Once downloaded, please follow the on screen instructions. I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Driver for HP Color Laserjet 1600 Windows 10 Pro 64 Bit

When will a driver be made available for the HP Color Laserjet 1600 for Windows 10 64 bit? It printed fine with Windows 8.1, but since the updgrade to Windows 10 it will not print at all. Thanks, JN

I have answered my own question or found a temporary fix until an official driver is released. After a few hits and misses with different HP Color Laserjet Drivers, I downloaded the HP LaserJet USB (DOT4) communication driver for Windows 8 and Higher (64-bit) located at the below link. It is listed for the HP Color LaserJet 3700 Printer but it worked for the HP Color Laserjet 1600 as well. Hope this will help someone. http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=315850&swLangOid=8&swEnvOid=4192 Thanks, JN

I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

Nobody can tell you anything without proper technical details. There is no point whatsoever in throwing around generalized assumptions without having exact error messages and so on.
Mylenium

How can I install and run lookout 6.1 on windows server 2008 64-bit without errors?

How can I install and run lookout 6.1 on windows server 2008 64-bit without any errors?
I was unable to start the lookout applcation after I install the lookout 6.1 on windows server 2008 64-bit.
(error code: 0xC0000142). Please help!
Thanks

This will pobably do http://joule.ni.com/nidu/cds/view/p/id/1051/lang/en but the major issue is that you should concentrate and read the instructions carefully. My two cents.
Dieet
Afvallen

Driver for LJET 3 printer under Windows 7 (64bit).

It's a perfectly good printer that I bought in 1980s and it's been working great for all these years under the Windows all the way up to and including XP. Recently I had to replace my XP PC by a Windows 7 (64bit) PC and I can't find a driver for it. Perhaps if anyone knows where I can get it...
There is also an issue with the cable - my new PC does not have a parallel port, so, I want to connect it to a USB port with a special cable "USB to Parallel IEEE 1284", which I assume is not going to give me "plug-and-play". When I click on Start ->Printers and Devices I can see a new device, IEEE-1284 Controller, not under Printers but under Unspecified. It shows that there is no hardware assigned to it. Is it going to be possible for me to "assign" somehow my LJET-3 to that controller?

The problem is "solved" for individual consumers, but NOT SOLVED for those who work in companies with managed networks. There's no way our proxy server is going to permit company-owned computers to connect directly to Windows Update. The tech support people here have done what they can to look for a workaround, but there appears to be none.
I guess I can see this kind of brush-off happening with a cheap consumer printer. However, this is a business-class product, so I'm surprised that HP didn't come up with a solution for business users who are very happy with their 1220Cs and who are still buying plenty of "genuine HP" ink cartridges at non-discount prices.
Is it that big a deal to make a generic driver available in downloadable form?
I realize I'm wasting my breath, but I'm disappointed -- and a bit surprised that HP would consider theirhalf-hearted response to be a "solution." HP is telling us that it wants to "make it matter," but it is still trying to find its way.

Can't install driver for HP laserjet p1102w

I have a HP laserjet p1102w installed on my network wirelessly. It was working fine, but then I had to set up the network anew.
Now I can't get it to work on one of our macbooks. The other one works fine, they both run 10.7.5
I tried to remove the printer from the list and install the driver again from scratch. I downloaded the newest driver from HP, installed it, and upgraded the printer firmware (using the other laptop). When i click the + in the printer list, the printer shows up, and then i get the message to configure it, saying that the software is available from Apple. It seems to download, and then says the software is not available at this point, telling me to get the newest software from the printer manufacturer. Which is what I did in the first place.
I tried this several times, also tried repairing permissions, that didn't help.
Does anyone have any ideas? Would greatly appreciate help, have spent a few hours trying to figure this out to no avail.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
-Griff W.

My pc on windows vista can not install driver for my Iphone 4s on 6.0.1

I can do everything in itunes but the windows driver can not be installed.

I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142).
I too have contacted Logitech for support and am awaiting a reply.
Can we get some help over here?

Can't install driver for my ATI Radeon 9800 XT VGA card!

Hello:
I own a computer with these specs:
Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
Computer:
Computer Type ACPI Uniprocessor PC
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
Internet Explorer 7.0.5730.11 (IE 7.0)
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2400 MHz (18 x 133)
Motherboard Name MSI 845E Max (MS-6566E) (6 PCI, 1 AGP, 1 CNR, 2 DDR DIMM)
Motherboard Chipset Intel Brookdale i845E
System Memory 512 MB (PC2100 DDR SDRAM)
DIMM1 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
DIMM2 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
BIOS Type AMI (09/13/04)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter RADEON 9800 XT - Secondary (256 MB)
Video Adapter RADEON 9800 XT - Secondary (256 MB)
3D Accelerator ATI Radeon 9800 XT (R360)
Monitor LG F900B [19" CRT] (121137790)
Multimedia:
Audio Adapter Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [A-1]
Storage:
IDE Controller Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Floppy Drive Floppy disk drive
Disk Drive IC35L060AVV207-0 (60 GB, 7200 RPM, Ultra-ATA/100)
Optical Drive SAMSUNG CD-R/RW SW-252S (52x/32x/52x CD-RW)
Optical Drive TEAC DVD+RW DV-W58E (DVD:8x/4x/12x, CD:32x/16x/40x DVD+RW)
SMART Hard Disks Status OK
I just replaced my old graphics card NVIDIA GeForce2 MX/MX 400 with another old model card, ATI Radeon 9800 XT. Everything was fine until I tried to update a recent ATI driver after uninstalling my old Nvidia driver with DriverCleaner Pro. I get this error message:
"Setup failed to launch installation engine: Class not registered"
Then, tried to install the driver through device manager with the update driver option. I directed to the driver folder on my desktop and the driver update went through, smoothly. However, when I put my computer in standby mode and then restore to full operation
I got a BSOD with this error msg.:
ati2dvag.dll-Address BF039614 base at BF012000, DateStamp 49344e53
Now I can't use standby mode because the computer just shuts down instead of operating in standby.
Is there any idea why my new card is not being fully accepted in my OS and how can I fix this issue. BTW, my ATI card is an 8x speed and my AGP slot supports a max of 4x speed, but I think my card is reverse compatible with 4x slot with the same voltage (1.5V).

Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!!

Can not install driver for my USB E-MU interface sound card

I have iMac mid 2011

Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!!

How can I install driver for Dymo Labelwriter 330 in Mountain Lion? Which current labelwriter models work with ML?

Installation hangs every time with 6 items remaining. I an considering buying a newer model of Dymo: which models will work with ML?
Lou

According to the Dymo Technical Support page for that model:
MACINTOSH
DYMO Label Software version 8.4.1
New In This Release:
- Latest version of DYMO Label™ software - Free download
- QR and PDF options have been added to the available barcode list.
- Minor bugs were fixed.
- Support for Mac OS® v10.8 Mountain Lion
Have you installed the driver version 8.4.1 as mentioned above?
Hope this helps

Can not install driver for Creative Soundblaster Audigy 2

Hello
I excuse myself for my unworthy english.
I disabled motherboard audio in Bios before installation and before putting soundcard in
It says that i can not find any soundcard
but when i search for audio? drivers in thedevice manager(correct word for it's)
it copies some files and audio works
the sound card is listed in dxdiag but in games i have bad performance
My system:
Windows XP Professional(directly after installing windows i installed SP2 then SP3)
Direct X 9.0c
Intel Pentium 4? 3 Gh
Gigabyte GA-8G000MK
2 GB DDR ram
?Nvidia 6200 256 MB
Soundblaster Audigy 2 ZS
My system is completely new.
Directly after installing windows(on formated partition)
i installed SP2 then SP3
then i installed Motherboard drivers
then i installed graphic drivers
then i installed antivirus drivers
then i installed wireless lan drivers
then i tried to install audigy 2 ZS drivers.i tried from CD and newest.Both didnt work
i disabled antivirus before installation attempt
i would be happy about help
Only one cable is used from CD-rom to soundcard:? CD-in
no other cable..buti was able to install long ago
Message Edited by ignaz on 08-2-2008 09:27 AMMessage Edited by ignaz on 08-2-2008 0:36 AM

Your welcome try my pax drivers that might slove your issue

Driver for hp color laserjet cp2025 windows 7 32 bit

I just bought a refurbished Dell Optiplex 755 32 bit with Windows 7. I have a hp color laserjet CP2025. The icon appears in devices & printers window as unspecified, category unknown yet the model no. appears correctly as CP2025. It has a USB connection that loads a driver automatically. I can't print a test page etc. After I powered the system up initally I was able to print a test page but after 200 or so updates I can't do anything with the printer.
This question was solved.
View Solution.

Hi, FYI I don't think my USB printer is supported in the latest version of Windows 7. Tnx., Ray

Can't find driver for SB0

Hello,
I have an Audigy card (SB0230), and I can't find a driver for it. I tried few solutions, and here are what I done already:
- I tried to install the newest driver from creative.com for Audigy board, but installer don't recognized my card and stopped.
- I installed KX Audio driver. Everything went ok, installer recognized my card and I had sound, but I bought this card not only for music, but for games too, so lack of EAX led me to uninstall this driver.
- I tried from the other side with the official driver. I unpacked it with WinRAR, installed it from Device Manager. It told me that this driver is not compatible with my device, but I ignored it and after restart I heard sound Unfortunetly, as for now I don't have any control over the card. Even Realtek has a control panel, so I figured out, that I must run installer to do something with my card, than just set volume :P Am I right? Where can I find driver for it's
I have Windows Vista, but in XP everything was the same (and I used KX in XP).

For Vista try this one,
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=2502

Install Oracle8 client in silent mode under windows environment

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

Cannot install driver for HP Laserjet 1022 Printer.

I am running Windows 7 64 bit. When I attempt to install the driver for the HP Laserjet 1022 Printer, although the software recognized that the printer existed (ergo must be plugged into the computer), I keep getting the message that installation is being held up until I connect the printer to the computer. Any suggestions?
Thank you

Hi mtnkeena2,
Use a different USB cable to see if the computer can then see the printer.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

Similar Messages

Maybe you are looking for