Can't install driver touchpad on win7 64bit

Hello , I have a problem when installing the touchpad driver on win7 . I can not install multitouch mouse , but success on win8 .
I have tried many of win7 but similar results . Please help me . thanks!
thank

Hi @HungVo ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Probook 450 g and issues with the mouse drivers.  The Synaptics Driver in Windows 7 comes with mouse drivers. Unless you are using a USB mouse which would use the Plug n Play drivers. Here is a download that might help.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • Can I install PSE 10-13 Win7-8 without the Organizer (uses a lot of resources)?

    Can I install PSE 10-13 Win7-8 without the Organizer (uses a lot of resources)?

    You can't install them separately, but it is easy to place unique shortcuts on the desktop for organizer and for editor.
    In Organizer, go to Edit>Preferences>Auto Analyzer options and uncheck analyzer and people recognition if you don't use them - may improve resource utilization.

  • Can't setup driver TouchPad Driver (Synaptics, Cypress) windows 8 on lenovo U400

    can't setup driver TouchPad Driver (Synaptics, Cypress)  windows 8 on lenovo U400
    The windows show message :
    Can't you help me !

    It doesn't work, i found a Dell XPS 13 driver and it works perfectly with my U400. Even multitouch and the new W8 gestures work.
    http://downloads.dell.com/FOLDER00813129M/1/Input_Cypress_W7_A03_Setup-03PDC_ZPE.exe

  • Can I install Driver updates?

    Ok, i have installed windows xp on my imac for over 7 months now still working fine and a few days ago i installed a program called drivermax and found a few updates for my current drivers, my question is:
    Can i install driver updates for my XP?
    i just don't want it to cause any problems BTW, is it possible for me to get a new intel chip and work it on my IMac?

    Hi ? and welcome to Discussions,
    my personal approach with Driver Updates in Windows is 'never change a running system' and/or 'if it ain't broken, don't try to fix it'.
    So unless I have any kind of trouble with my Windows I don't update Drivers.
    BTW: I am still running the BootCamp Beta 1.1.4 Drivers
    If you want to update drivers, you should consider making a backup of your BootCamp Windows before with WinClone http://www.twocanoes.com/winclone/ or at minimum set a 'System Restore Point' to which you can revert in case something goes wrong.
    Nontheless you should stick with the Driver Updates Apple has provided.
    BootCamp 2.0 Drivers are on the Leopard DVD and BootCamp 2.1 Drivers can be downloaded from Apple but will only install if you have installed the 2.0 drivers .
    You can't 'upgrade' the Intel processor without at least losing your warranty.
    Even then this is definitely a very difficult task and most likely not worth the time and money you have to invest.
    Regards
    Stefan

  • G510 and Windows 7 - can't install driver

    Hi!
    I have a problem with driver installation on my G510 notebook with Windows 7. I've installed all drivers, and only two had left: "Unknown Device" and "PCI Simple Communications Device". After installing the Intel Power Management Engine, the "Unknown Device" had disappear (installed successfull), but second one is still not installed. VendorID (8086) and DeviceID (8C3A) suggests, that this is Intel Power Management, but this driver is allready installed.
    I tried to install different versions of this driver (even for Win8), but nothing changed. Google says nothing on my problem.  What else can I do? What am I missing?
    Regards.
    Solved!
    Go to Solution.

    Downloaded the file directly from Intel. Works fine now.
    Too bad, that Lenovo can't provide proper drivers (Win7 x64) for their notebook. I've noticed several driver problems:
    - Intel Graphic Card driver, can't recognize the device (had to download directly from Intel),
    - AMD Graphic Card driver installs ok, but system shows error in Device Manager (had to download directly from AMD),
    - WLAN driver setup finishes ok, but the driver is still not installed (had to download driver for diffrent notebook model),
    - Power Management driver can't install all used devices (had to download directly from Intel).
    Regards.

  • Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

    Hi,
    I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
    I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
    The printer works fine on my other laptop with Vista on it. Help!

    Hi peshi77,
    Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
    Once downloaded, please follow the on screen instructions. I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I can't install Driver VGA on Intel Web for my T61 - Blue screen when play Red Alert 3

    I found the newest Driver VGA from http://support.intel.com/ (for Intel965) but I can't install. The Error message is ("The driver being installed is not validated with this computer...")
    And I search on Lenovo support, and setup the newest Driver for X3100.
    But when I play RA3, sometime i found blue screen
    Can Anyone help me?
    My T61: T7100, X3100, Intel965 ...WinXP SP3...

    JMoriaty,
    Have you installed this driver (v6.14.10.4926)?
    John B @ forum.notebookreview.com

  • Can't install driver mac OS X 10.5.8

    I have just bought a new "HP Deskjet Ink Advantage 1510 All-In-One Series" and I can't install the driver.
    I own a 2007 mac mini and i cant update the software more than 10.5.8 (because they dont sell the 10.6 CD anymore) so I can't install the driver....
    Is that anything I can do?
    Thanks!

    The Apple store sells 10.6 CD it for 20$.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • I can't install iTunes 11.0.3 (64bit) for my window 8

    Hello there
    Today i got trouble with my iTunes so I can't install new version (11.0.3) for my Window
    I use Window 8 Pro 64bit and when I install this version, I get this pop up >"<
    Please help me >"<

    I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • How can i install drivrutin for windows 8 64bit

    how can i install the right drivrutin for my iphone4 on windows8

    Hello, katjazc.
    To install the correct driver for iTunes see the article below. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    See the section labeled Reinstall the Apple Mobile Device Driver under Verify that the Apple Mobile Device USB Driver is installed for Windows 8. 
    Cheers,
    Jason H. 

  • Can't install drive

    Folks,
    i can't install the drivers from the provided cdrom for my new Audigy 4 card.
    Error message reads,"An error occurred during the installation of the device. The parameter is incorrect"
    I'm running WIN2000,anyone have a remedy.
    Regards.

    KrisBeeNess wrote:
    it was really hard to find something concrete about it, even with the search function.
    I end up using "Google" with my "username" to find my own archived posts as less frustrating!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Win 7 64bit Can't install driver

    I have the latest software and I have a brand new storm2, when I install the software, all is fine. 
    When i connect my phone , it doesn't charge and the software does not reconize it
    In device manager it says "RIM Composite Device"  and says  "The drivers for this device are not installed. (Code 28)
    I have rebooted many times, tried different ports , installed old software and new. What could be the problem? My ports have plenty of power , never had any issue with any other cell phone, or multiple cell phones connected
    I have unplugged everything from usb, doesnt work, it has to be a software problem. ideas?

    papelian wrote:
    i wish there was some way to get RIM to understand how utterly disappointed we are that they do not have a desktop manager version to sync with windows 7 64 bit/office 2010.  i have been a loyal blackberry fan and customer for over 10 years, and i expected better of them.  Especially because they do not seem able to provide a timeframe by when this issue should be resolved. Very very disappointing, RIM.
    Hi and Welcome to the Forums!
    Actually, RIM has released a timeframe...here...and here.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Installing DM11.5 under Win7 64bit

    Has anyone successfully installed and used DM 11.5 under Windows 7 64bit? I've tried it on two different computers (a laptop and a desktop) and in both cases when I try and "Open" or "Join" a workspace as soon as Studio tries to open a Windows Explorer window so I can browse to the .DXM the program locks up and crashes.
    With Studio closed, if I go through Windows Explorer, find a .DXM and double click it, Studio will open OK. However, if any setting is off and Studio wants to 'browse' for the missing file (.dxs or .ini) then the program locks up.
    I believe the patch level of 11.5 we are using is p0 or p1.

    I have now tried the install on a Win7 32-bit PC and received the exact same results. The 64-bit systems were Windows 7 Home and the 32-bit was Ultimate.
    I have also confirmed that the 11.5 system is P01.
    I am interested to know if anyone else is having this problems as our office is currently upgrading ALL PC's to Windows 7 over the next 12 months. Our clients are also moving to Win7 so if there is a compatibility issue, I'd love to know sooner rather than later.
    I verified in the DM 11.5 Install guide that only XP and Vista are documented as tested.

  • Installing MaxDB client on Win7 64bit and connect to 32bit server

    Hi everyone,
    I'm trying to install a MaxDB client on my 64 bit Win7-System in order to use the BO universe designer. And basically it does't work because the db server is 32bit. I tried to:
    1. Install the 64bit client driver -> The connection assistant moans about wrong architectures between application driver and database
    2. Install the 32bit client driver and hope that Win7 does not complain -> The installer quits because of the wrong architecture. I'm aware of the 32bit database administrator in Win7 (C:\Windows\SysWOW64\odbcad32.exe) but as long as it is not possible to install the driver this solution is not applicable
    3. Use the virtual XP mode -> Installation of the 32bit driver is possible without any problems. Then, the only problem is to access the driver. Unlike the usual "start XP mode application" (accessible via the start menu), the drivers are only registered in the virtual machine. Consequently, I had to install the whole BO package in the virtual machine as well. This works fine, but running the universe designer on the Win7 system in a virtual XP machine just does't feel right
    Any ideas to resolve this issue? Maybe "force" the MaxCB 32 bit client into installation?
    Thanks in advance,
    Frank

    > I'm trying to install a MaxDB client on my 64 bit Win7-System in order to use the BO universe designer. And basically it does't work because the db server is 32bit. I tried to:
    Sorry, but that's nonsense.
    The byte-version of the client has nothing to do with the servers byte-version.
    Connect 32 to 64? Works!
    Connect 64 to 32? Works!
    Connect 32 to 32? Works!
    Connect 64 to 64? Works!
    The client software really is independent from the MaxDB server software.
    What's not independent is the byte-version of the application you want to use with the 32-bit client software.
    In this case, the byte-version of the BO universe designer.
    > Any ideas to resolve this issue? Maybe "force" the MaxCB 32 bit client into installation?
    Since I'm not (yet) familiar with the universe designer software ... is this a 32-bit software?
    Have you already opened a support message to get an answer from the BO support collegues?
    Is the BO universe designer officially supported on Windows 7/64-Bit at all?
    regards,
    Lars

  • My pc on windows vista can not install driver for my Iphone 4s on 6.0.1

    I can do everything in itunes but the windows driver can not be installed.

    I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142). 
    I too have contacted Logitech for support and am awaiting a reply.
    Can we get some help over here?

Maybe you are looking for

  • Lost Voice Memos after iOS 8.1 Upgrade

    I have lost all of my voice memos after upgrading to iOS 8.1.  I can't even find them when I restore from backup.  AND I can't access my backup via iCloud.  HELP!  These were irreplaceable memos.  Any suggestions? 

  • Valuation Class not appearing in Material Master (Finished Goods)

    Hi Friends, I am facing problem with Valuation Class not appearing while creation of Material Master especially in Finished Products when i give the Valuation class it showing the message like below *Valuation class IBM2 not allowed for material type

  • Pages 5 ? where is the serial letter function?

    Hello Apple! I loved the easy linking in pages in the past and also the automatic link to the contacts. Now, in version 5 this feature is not visible for me anymore. What happend? Why this change? And - no help is around to give a clue or an answer.

  • Playing movie on multiple slides

    Filmed a speaker giving a presentation while he went through his Keynote slides, now I need to take his slides from keynote and place the small movie of him talking on the corresponding slides from his presentation. Some of the movie clips span two o

  • Partition of iMac

    Hello I want to use Corel Draw, and was thinking of installing the program onto an iMac, into a Windows partition created with Bootcamp. I was thinking of using the iMac only for windows software, with my existing iMac for Mac programs. So, what I wa