Can't install drivers and software for hp c7180 on virtual machine with no USB port

I have a virtual machine running Windows XP to use some old software that isn't compatible with Windows-7.  I also would like to print to my HP C7180 all-in-one printer from the XP VM.  I downloaded the entire 520MB app and driver package, and then just the 72MB driver package, but both give me errors stating:
This system does not meet one or more of the minimum requirements needed to install this product.  The installation cannot continue.
Requirement/Details and Guidance
USB Drivers/This computer does not have the necessary USB software support to allow completion of a USB installation.  The installation cannot continue until this is resolved.
USB Hardware/Required Action: Click Cancel to exit this software installation.  In order to install this device as a USB device, please refer to your computer documentation or USB add-in card documentation for more information about USB drivers.
I don't want to do a USB installation, but a Network installation as this all-in-one is connected only to my network.
Is there any way to force this software (with an option/switch) to only do a network installation?  It never gets to the part where it asks what type of install where you can choose USB or Through the Network.
A link to where  I can simply download the drivers that would allow me to print only would work as I can create a local LPR printer port using the printer's IP address.
Please advise...

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • Where can I download drivers and manual for Tecra 8200

    Where can I download the drivers and manual for a TECRA 8200 (PIII 900/128/20/CD)

    Take a look on this Toshiba European website:
    http://eu.computers.toshiba-europe.com
    There you will find an Support homepage which contains different links to the drivers and manuals.
    Then you have to choose the *ARCHIVE* in the download form!
    This unit is an oldie and therefore all manuals and drivers were moved to the Archive.
    Bye

  • Can't download drivers and software from website

    I've seen this problem posted a few other times so it looks like it's recurring.I reinstalled Win7 on my machine.  I am looking to reinstall the driver and software for my All in One.  I get "HP is compiling your results. This could take up to 3 minutes, depending on your computer and connection speed. Thank you for your patience." message for over 10 minutes now with only the busy indicator.  I've tried this on both Chrome and IE with the same results.  Help.  I need my scanner.

    The driver site is still having issues, but you can download the Windows 7 x64 driver for the HP Deskjet 3050a directly from the link here: http://ftp.hp.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

  • Can't install drivers from HP for laserjet 1022 printer on my new computer with Windows 7.

    I have a laserjet 1022.  I can't install the HP drivers provided on the HP website onto my new computer.  When it asks me to connect the printer, the printer is recognized, however the message continues to say waiting for the connection.  I have tried all of the suggestions listed on the forum by both HP and other individuals, including down loading the drivers from other countries.  Other attempts when downloading the drivers ends up with a message saying that the download could not be completed.  I have tried other USB cables and that doesn't work.  I love HP products but I really need help on this one.  HELP!
    Regards,
    Day Trader
    This question was solved.
    View Solution.

    Hello DayTrader,
    When you connect the printer and if the message continues to say "Waiting for Connection", please try the below step..
    Go to Device Manager, ( to do so , Right click on Computer icon, Select Manage, from the left pance m click on Device Manager , which would display the Device Manager on right pane.)
    There should be Yellow bang entries ( Yellow ! mark ) with printer name on it.
    Right Click on each of them and select Update Driver. 
    Select "Browse my Computer for driver software "
    Click on Browse button to point to the CD ( if you are using the CD to run the installation ) else copy the path where the drivers have been extracted if you had downloaded it. Usually it will be in folder with name starting 7z... under TEMP folder .
    Then Click Next button .
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Scanners with minimal/simple drivers and software for iMac/Lion

    Just been told that my old Canoscan 8400F color flatbed scanner will not work with my new Lion installation.
    Don't mind too much since I always hated the convoluted and error-prone (system-changing?) Canon scanner drivers and toolbox software.
    Which Lion/iMac-friendly color flatbed hardware (for simple image, document, and perhaps OCR) systems would anyone here recommend, please, which also has minimal system installation - that is, where the driver is a single file that can be uninstalled etc?
    Thanks!

    Brother drivers are included in OS X so you won't (shouldn't) have any trouble setting it up.
    Image Capture works a charm, but I only scan occasionally for sharing the odd file - no complaints.
    I used to work in graphics for a living so I also have VueScan, although I can't remember the last time I had to use it.
    No problem scanning books, although I sometimes have to apply a bit of gentle pressure if it won't lay flat.
    As I said before, very happy with my Brother (haven't got any sisters ) - and a couple of friends/neighbours with Macs seem happy with their's (after I suggested they get one - honest, I don't work for them ).
    Also, if you want to use it via wifi it was a breeze to set up compared to the Lexmark and HPs I've helped people with.
    If you do get one and once it's installed it's worth doing software update as SU doesn't seem to offer any driver updates if it thinks you haven't got a Brother (or any other make for that matter) unless it sees one on your network.

  • Compaq presario CQ3230IX drivers and software for windows xp

    sir 
    we have purchased the computer compaq presario model cq3230IX around five year ago.  the computer came with complete diver setup  and xp operating system preloaded. and we were not given any  cds of drivers or any other cds
    now my system is formatted and XP SP3 is installed however the system is running  without network, audio video drivers
    hence i request you to send the complete suitable driver and software to my email address or guide me to get the same.
    thanking you
    VN Murthy
    computer model no. CQ3230IX
    Prod#   BK153AA#ACJ
    S/N     [Personal Information Removed]

    Hi:
    Below is the link to the product specs page for your PC.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02022314&tmp_task=prodinfoCategory&cc=us&dlc=en...
    You must have had it special ordered because according to the specs, it came with Linux, not XP from the factory.
    Below are the links to the drivers you need.
    First install the Intel chipset driver and reboot.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20019&lang=eng&ProdId=816
    Next, install the Graphics driver and reboot:
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21828
    Audio:  Accept the agreement.  Download and install the first driver shown in green type.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    Ethernet:  Download and install  the 3rd driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...

  • Pricing and plans for setting up new virtual machines

    Hi,
    We are having our dedicated servers with below mentioned configurations and now we are planning to move them to Microsoft Azure virtual machines.
    we would like to have your suggestions and plans to move our all applications to Azure virtual machines.
    We are having
    8 different web applications,
    1 Scheduler service,
    Mobile push Notifications for mobile apps,
    1 BI Server,
    4 databases
    Currently we are using 4 servers for all the above mentioned applications/services applications.
    Our current server details are as below
    S.No      Server Details   
    1              Processor                           2x
    Xeon CPU E5-2620 @ 2.00GHz
    2              CORE                                  2x
    12 Core
    3              HDD                                    3x
    1TB (RAID 5)
    4              RAM                                   16
    GB RAM
    5              Bandwidth                       
    50,000 GB
    6              Windows Server               Windows Server 2008 R2 Standard
    7              IIS Version                        
    7.5
    8              SQL Server                        
    Microsoft SQL Server 2012
    9              Services                             
    Web Server,database and BI server.
    Looking forward for valuable suggetions and response.
    Regards
    Denise

    Hi,
    As I know,  you need to create an Azure VM with IIS installed to host your 8 web application, create an azure oracle VM to host BI server, and create an Azure SQL Server VM to host your 4 database, for Scheduler service, please try to use Azure Scheduler
    service:
    http://azure.microsoft.com/en-gb/documentation/services/scheduler/Azure Notification Hubs provide an easy-to-use infrastructure that enables you to send mobile push notifications from any backend (in the cloud or on-premises) to any mobile platform, see
    more: https://msdn.microsoft.com/en-us/library/azure/jj927170.aspx
    Please try to estimate your bill at azure pricing calculator:
    http://azure.microsoft.com/en-us/pricing/calculator/
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to download drivers and software for hp pavilion dv6-3127tx . product unable to search

    How to download software and drivers for HP Pavilion dv6-3127TX. Unable to search the product in help and support center.
    Mohan Singh

    Hi,
    I can't find a listing for this model either, but you should find the drivers available on the link below work.
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4331848&lang=en&cc=us...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Zen V drivers and software for windows 2k, i know they exist but whe

    Ive already tried the one thats stickied but to no avail. Please help, music is very important for life!Message Edited by zenv_user on 04-29-200703:56 PM

    Sorry but the drivers will only go back to WINDOWS 2000. You can call HP Support (1800-474-6836), and try to get a CD with the drivers. It is a very slim chance that there is no CD available, but it is worth a try.
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Need help install drivers and software

    & well after talking with creative for a week
    they finnaly gave me the hole cd for the sound blaster 5. sb0680
    and then i go to set up and says this?
    your version of windows operating system is not supported by this product . please
    upgrade to windows 98 second edition or later versions before resuming
    installation
    i got windows ME ver 4.90.3000
    would you guys know why its doing this ?
    thanks for your time

    yer its old school but 9x was the only series of OS's that were stable and fast.
    any way i am sure its made for windows me as it says get windows 98 SE and above
    last time i checked windows me is above windows 98 se lol creative gee you guys got real probloms . ps creative mabye trying the drivers on every OS that ment to support the driver will help very much lol and the card is just sound blaster 5.

  • When Sony will update drivers and software for VPCF23EFX to be compatible with win 10 ??

    http://community.sony.com/t5/VAIO-Windows-10/Windows-10-upgrade-Information/m-p/513320#U513320 Which Windows version do you have?

    Hi mohamed-algamal,
    Welcome to Sony Community!
    Thank you for showing interest in upgrading to Windows 8. In addition to what robertwycoff said we highly recommend that you also check out this link for more information about upgrading to Windows 10. 
    Regards,
    Jen
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Can I install CS 5.5 in a multi-user virtual machine? (licensing question)

    We have a single-user license for Creative Suite 5.5, but the role we use it for may be filled by different employees at different locations depending on circumstances.  To make sure the application is available to whomever needs it, we'd like to put it on a VM, which would only be accessible to the single user who needs it at a given time.  Is this permissible under the license?

    Try if deleting the file/folder '\AUTORUN.inf' present at the following location, allows you to run the installer successfully -
    "C:\Program Files\Common Files\Adobe\Bridge CS5.1 Extensions\Adobe Output Module\mediagallery\resources\flashgallery\AUTORUN.inf"

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Drivers and software Hp deskjet 2050 j510a All-in-wonder for Windows 8 Pro x64

    Hi,
    from when I update my system with Windows 8 Pro I can' t use the printer Hp Deskjet 2050  J510a.
    I downloaded the latest version of drivers and software for Windows 8 Pro 64 bit:
    DJ2050_J510_Basicx64_1313.exe
    The application give me at the and of installation the message:
    "installation not completed"
    and in details I can see:
    "Installation error. Operative system not supported. This software can be installed only in Windows XP, Vista, Seven. Change operative system or install the printer in another computer."
    The printer as been recognized from the system, and in panel control I can see it, but when I print any page the printer make only half print and than show me a message of " not original or used printer cartridges, press OK to continue or cancel do delate the print" but the print cannot be completed untill the end.
    Cartridges are original; I tested the the printer too in an another computer with different operative system: the printer work correctly.
    Thanks for your attention

    Hello kamran554,
    I understand you are looking for the driver to download for your Deskjet 2050 J510a for Windows 8 64bit.
    I have located the correct driver for you to download below.
    Please click the link to download and install.
    HP Deskjet Full Feature Software and Drivers
    Good luck to you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • When is Lenovo planning to update their drivers and software to 64-bit versions for Windows 7/8?

    Many drivers and software for T530 are still 32-bit, despite being offered for 64-bit operating systems.

    lenssd9 wrote:
    Many drivers and software for T530 are still 32-bit, despite being offered for 64-bit operating systems.
    Which drivers are you looking for?
    I took a quick look through the T530 page, and didn't see any that were 32-bit only.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for