Can't install drivers. unknown error

gents,
I suddenly can't install drivers so that my new iLok and my Logitech USB-Dongle aren't working. I did a backup of all drivers from another Win7x64 systemdrive and extracted them. The Drivers were working on that system and am there.
Still I got a FILE NOT FOUND or similar error.
I checked the SETUPAPI.DEV.LOG which I copied below. Can anyone see what's the problem with the iLok driver f.e. ?
[Device Install Log]
OS Version = 6.1.7601
Service Pack = 1.0
Suite = 0x0100
ProductType = 1
Architecture = amd64
[BeginLog]
. inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
. inf: {SetupCopyOEMInf: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.097
. sto: {Import Driver Package: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.098
. sto: Importing driver package into Driver Store:
. sto: Driver Store = C:\Windows\System32\DriverStore (Online | 6.1.7601)
. sto: Driver Package = d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf
. sto: Architecture = amd64
. sto: Locale Name = neutral
. sto: Flags = 0x00000000
. sto: Copying driver package files to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'.
. inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
. inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
. flq: {FILE_QUEUE_COPY}
. flq: CopyStyle - 0x00000000
. flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
. flq: SourceFilename - 'ilok-x64.cat'
. flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
. flq: {FILE_QUEUE_COPY exit(0x00000000)}
. flq: {FILE_QUEUE_COPY}
. flq: CopyStyle - 0x00000000
. flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
. flq: SourceFilename - 'WdfCoInstaller01007.dll'
. flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
. flq: {FILE_QUEUE_COPY exit(0x00000000)}
. flq: {FILE_QUEUE_COPY}
. flq: CopyStyle - 0x00000000
. flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
. flq: SourceFilename - 'oem43.inf'
. flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
. flq: {FILE_QUEUE_COPY exit(0x00000000)}
. flq: {FILE_QUEUE_COPY}
. flq: CopyStyle - 0x00000000
. flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
. flq: SourceFilename - 'iLokDrvr.sys'
. flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
. flq: {FILE_QUEUE_COPY exit(0x00000000)}
. flq: {_commit_file_queue}
. flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=4
. flq: {_commit_copy_subqueue}
. flq: subqueue count=4
. flq: source media:
. flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok]
. flq: SourceFile - [ilok-x64.cat]
. flq: Flags - 0x00000000
. flq: {_commit_copyfile}
. flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\ilok-x64.cat'
. flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
. flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
. flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\ilok-x64.cat'
. flq: {_commit_copyfile exit OK}
. flq: {_commit_copyfile}
. flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf'
. flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
. flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
. flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\oem43.inf'
. flq: {_commit_copyfile exit OK}
. flq: source media:
. flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
. flq: SourceFile - [WdfCoInstaller01007.dll]
. flq: Flags - 0x00000000
. flq: source media:
. flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
. flq: SourceFile - [WdfCoInstaller01007.dll]
. flq: Flags - 0x00000000
. flq: {_commit_copyfile}
!!! flq: Error installing file (0x00000002)
! flq: SourceFile - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll'
! flq: TargetFile - 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'
. flq: {SPFQNOTIFY_COPYERROR}
!!! sto: Failed to copy file 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll' to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'. Error = 0x00000002
. flq: {SPFQNOTIFY_COPYERROR - returned 0x00000000}
!!! flq: SPFQNOTIFY_COPYERROR: returned SPFQOPERATION_ABORT.
. flq: {_commit_copyfile exit(0x000003e3)}
. flq: {_commit_copy_subqueue exit(0x000003e3)}
!!! flq: FileQueueCommit aborting!
. flq: {_commit_file_queue exit(0x000003e3)}
!!! sto: Failed to copy driver package to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'. Error = 0x00000002
. sto: {Import Driver Package: exit(0x00000002)} 21:18:40.125
. inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
! inf: Add to Driver Store unsuccessful
!!! inf: returning failure to SetupCopyOEMInf
. inf: {SetupCopyOEMInf exit (0x00000002)} 21:18:40.251
!!! ndv: Driver Package import failed for new device...installing NULL driver.
. dvi: {Plug and Play Service: Device Install for USB\VID_088E&PID_5036\3088A22A_7C39126D}
. ump: Creating Install Process: DrvInst.exe 21:18:40.266
! ndv: Installing NULL driver!
. dvi: Set selected driver complete.
. dvi: {DIF_ALLOW_INSTALL} 21:18:40.333
. dvi: No class installer for 'iLok'
. dvi: No CoInstallers found
. dvi: Default installer: Enter 21:18:40.334
. dvi: Default installer: Exit
. dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 21:18:40.334
. dvi: {DIF_INSTALLDEVICE} 21:18:40.334
. dvi: No class installer for 'iLok'
. dvi: Default installer: Enter 21:18:40.335
! dvi: Installing NULL driver!
. dvi: Writing common driver property settings.
. dvi: {Restarting Devices} 21:18:40.351
. dvi: Restart: USB\VID_088E&PID_5036\3088A22A_7C39126D
. dvi: Restart complete.
. dvi: {Restarting Devices exit} 21:18:40.562
. dvi: Default installer: Exit
. dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 21:18:40.563
. ump: Server install process exited with code 0x00000000 21:18:40.567
. ump: {Plug and Play Service: Device Install exit(00000000)}
. ndv: {Update Driver Software Wizard exit(00000002)}

update. I also post the SETUPAPI.APP.LOG:
[Device Install Log]
OS Version = 6.1.7601
Service Pack = 1.0
Suite = 0x0100
ProductType = 1
Architecture = amd64
[BeginLog]
[Boot Session: 2014/12/29 20:54:19.610]
>>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
>>> Section start 2014/12/29 21:18:39.855
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
cpy: Policy is set to make all digital signatures equal.
<<< Section end 2014/12/29 21:18:39.857
<<< [Exit status: SUCCESS]
>>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
>>> Section start 2014/12/29 21:18:39.862
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
cpy: Policy is set to make all digital signatures equal.
! sig: Verifying file against specific (valid) catalog failed! (0x80096002)
! sig: Verifying file against specific Authenticode(tm) catalog failed! (0x800b0100)
<<< Section end 2014/12/29 21:18:40.093
<<< [Exit status: SUCCESS]
>>> [DIF_SELECTBESTCOMPATDRV - USB\VID_088E&PID_5036\3088A22A_7C39126D]
>>> Section start 2014/12/29 21:18:40.093
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
<<< Section end 2014/12/29 21:18:40.093
<<< [Exit status: SUCCESS]

Similar Messages

I can`t install drivers for Promise IDE on WINXP.

Hi, guys. I have a problem. I can`t install drivers for Promise IDE on WINXP. I `ve got an error "This device cannot start. (Code 10)". In Norton Ghost (DOS) drive on Promise work fine. I can`t install WINXP + SP1 on HDD on Promise controller. After pressing F6 and installing driver i `ve got an error Can`t find drive. BIOS 193 beta. Devices: IBM 120Gb 180GXP on primary master, Seagate 120 SATA 26AS on Third master. CD-ROM and DVD-ROM on secondary channel. Drivers 1.00.1.37 from ASUS and 1.00.1.29 from MSI. No result.
And another one. Why very poor perfomance when copying large files (700Mb). When starting copying speed is 25-27Mb/sec, when finishing 5-8Mb/sec. All drives under NTFS.
PS. Sorry for my bad english.

Quote
Originally posted by Athlon1000
But if you have selected Promise as: SATA in BIOS shouldn't you then use the ulsata.sys driver instead and if you choose Promise as: RAID in BIOS then you should use the f2tx*.sys, or am I way wrong here ?
That's correct
So if I do not misunderstand you, Windows hangs when accessing the drive?
Is it only with this drive, then maybe it's an incompatibility between the controller and the ata electronics of the drive.
Or maybe it's completely broken.. have you tried it on the ICH5 IDE controller?
If it works there you should use this configuration.
I've read about problem with some drives ... take a look into the threads on the top of this board (FAQ etc.).
What I found out yesterday: You can use the Promise in RAID mode and define a RAID0 array with only one single drive. So you could use the Fasttrak driver from MSI, which is up to date.
I haven't tried this solution (one disk in a RAID0 stripe configuration), but I think it should work...
Maybe you give it a try
PS.: Before you switch to RAID mode, you have to change the Promise Driver... but be careful: windows won't boot with the wrong driver - your last chance would be "last known good" then...

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Boot Camp won't update, no Bluetooth, can't install drivers, see OS X DVD

I have a client who has a whole mess:
Mac Mini Core2Duo running Leopard 10.5.6
Boot Camp 1.4 Beta
Vista
Inserting the OS X DVD produces nothing, can't see it, can't open it, can't install drivers from OS X Install Disc 1.
Can't update Boot Camp to 2.1 (update never executes no matter how long you wait after dblclick)
No Bluetooth in Vista, anywhere. Mighty Mouse somehow works but no scrolling with the ball.
Won't run Apple Bluetooth Installer.exe
My only recommendation at this point is to delete the Windows partition and start from scratch, and put XP back on instead of Vista, hoping that we'll be able to update Boot Camp to 2.1 and put the drivers on from the OS X Install Disc 1 that came with the Mini. This is fairly difficult to explain or even comprehend on my part, and I've been doing this for decades.
Anybody have a hint for me?

Oh nevermind. I was doing this via remote and as it works out, some people don't know if they have Leopard or Tiger.

Can't Install 11g Db, Error ORA 28547/24324/01041

hi,
I was trying to install db 11g and the installation stopped half way through with 3 errors.
1.ORA 24324: SERVICE HANDLE NOT IDENTIFIED
2.ORA 01041: INTERNAL ERROR, HOSTDEF EXTERIOR DOES'NT EXIST
3.ORA 28547: CONNECTION TO SERVER FAILED, PROABLY NET ADMIN ERROR.
I have just trained on oracle application developper and very new to installing a personal database.
My machine is a pentium duo core 1.7, 2gb ram and 120 hdd and my OS is XP professional sp2. I connect through this machine
through my office lan to oracle 9i db in my company server.
I have tried to set up a 11i DB Personal and 10g developer suite on the same machine.
I could figured out the 1st error ORA-01041 and understand that the Environment variables have to be changed before I try to
reinstall 11g.
As I checked up the variable from System>advanced>environment variables it is showing a very long string which is
(C:\app\ravid\product\11.1.0\db_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program
Files\Intel\Wireless\Bin\;C:\ORANT\BIN;)
After looking this up in the c:\oracle folder trace the string only uptil 'bin'.
I have DEVELOPER 2000 NT with Forms runtime and Graphics runtime already on the machine however i did not see any path in the
system environment variable for this, or could it be that the string i mentioned above has that included too..one thing i know for
sure is there was no oracle home before i tried to install the 11g db.
Could someone also help me out with the 1st and 3rd errors as i don't know what they mean?
Will really appreciate if you can help me through this.
Thanks in advance for your time and advice.

Re: Can't Install 11g Db, Error ORA 28547/24324/01041

Can't Import Catalog - Unknown Error

Is this still a known bug without a solution?
I have LR3 on a MacBook Pro Snow Leopard and on a PC Desktiop Win XP Pro SP3. I exported a catalog from the laptop to an external hard drive and then attempted to import it to the desktop and kept getting the dreaded Can't Import Catalog - Unknown Error message.
I don't have an issue with LR Beta because i didn't use it; I just upgraded v2.6 installations on both machines to LR3.
I like LR3 but I've got to be able to get the image files and the LR work I've done on them from my laptop to my desktop and an Unknown Error is not what I need. Am I going to have to wait for the first dot release to be able to do this?
--Bob

Well, I just got off the phone with Adobe Technical Support and I am extremely frustrated
Support: Since you are working cross-platform (from a Mac laptop via an external hard drive and then to a Win XP desktop) we can only say that sometimes it will work and sometimes it will not.
Me: Huh? It worked perfectly in LR 2.6.
Support: I am sorry. That is all I can tell you.
Me: That really ruins my month. I've got thousands of edited images on my laptop from a 3 week trip to SE Asia and now I can't move the catalog to my desktop? Give me a break!!
Support: You can copy the image files to your desktop.
Me: Without the accompanying adjustments?
Support: Yes. Sorry.
Me: Me too.
Anyone have a better idea? I've filed a bug report.....
--Bob

HT3743 I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do

I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do, for solution,
please advise me,
best regards,
Ahmed

try to edit your host file ang delete any line that contain gs.apple.com

ITunes 7.3 can't save library (Unknown error -50) ?????????????

So ever since i update to 7.3 my itunes is totally screwed up. it always says this when i reopen it: "iTunes 7.3 can't save library (Unknown error -50)"
not only do i have to redo whatever changes i make to my itunes but it lost a song i recently purchased because it "cant save" my itunes library. this is so frustrating. is there going to be a 7.3.1 coming out anytime soon to fix this problem because i know I'm not the only one who has it!!

So ever since i update to 7.3 my itunes is totally screwed up. it always says this when i reopen it: "iTunes 7.3 can't save library (Unknown error -50)"
If you're getting that one on iTunes 7.3.0.54, try an upgrade to iTunes 7.3.1.3. (Note that Michael, who replied to you earlier in the thread, is reporting that here: http://discussions.apple.com/message.jspa?messageID=4923385#4923385 )
Here's a link to the new installer:
iTunes 7.3.1.3 Installer

42001 Presenter Publish Error Can't create uploader unknown error

42001 Presenter Publish Error Can't create uploader unknown
error
Well I guess that about says it all. I cannot publish ANY of
my Presenter files to Connect Pro... Do I need to do a Presenter
reinstall?

I know this is from 2010 but I just started with a company that uses this software and we are receiving this same error. I tried doing the regsvr32 ppsuplo.dll but came back with the following result " The module "ppsuplo.dll " failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. I then looked in the program files folder for presenter and found the file right there. Then tried using the repair option without any luck. Anyone have an idea of what else we can do?

I am having this error when syncing by wifi:This ipod can't be synced unknown error (-50) occured

I get an error (This ipod can't be synced an unknown error -50 occured) when i try to wifi sync my ipod touch 4{ios5} . I have installed itunes 10.5{windows 7} and checked the option sync via wifi and have synced by data cable. I can't figure out what the problem is itunes shows my ipod on wifi and sync also starts but in the end it gives this error.
Any solution ?

I had this same error. It started when I was performing a USB sync, and unplugged the iPhone prematurely.
In any case, this procedure solved the problem for me, too.

Who can help me with unknown error 0xE800005E

After updating itunes to 10.6 and my iphone to iOS 5 my iphone got trouble syncing with my computer.
I was able to connect at first but halfway a sync I was disconnected and got the message:
iTunes could not connect to this iPhone because an unknown error occurred (0xE800005E)
After that my phone would not work properly and after a restart i only got the Apple logo on my phone.
I was able to do a recovery, restore and restore back up. However the after the back up was put back I had trouble syncing and the phone would stop working again. Did another recovery and restore but that gave other error messages.
Tried it with another computer without itunes 10.6. I was able to do a recovery, restore. This gave a basic recovery but not much of my apps and other info.
When I tried to sync on my other computer I got the same disconnect and error message.
I did a complete new install also, didn't work either.
I can't use the phone at all because after a little while I can't get into the phone any more and a reset gives the apple logo.
I used different USB cables and slots. No results.
Is this a hardware issue or software?
Are there more people with trouble after updating to iOS5 with this problem?
Has somebody some suggestions what to do next.

In case you didn't read the thread you posted to, This might be useful -
http://support.apple.com/kb/TS3221
If it isn't please tell us what kind of computer, what operating system, and how you are connecting the iPad to the computer. Through a hub or direct to the computer, and if it's direct and you don't have a laptop whether you are using a front USB port or a back USB port.

Can't update iPod, Unknown error occured????????

"The iPod cannot be updated. An unknown error occured (-48)" comes up when I try to update my iPod. What does this mean? How can I fix it?

I figured it out!!! I just took iTunes off and reloaded it and now I don't get that problem anymore!

Can't install drivers from HP for laserjet 1022 printer on my new computer with Windows 7.

I have a laserjet 1022. I can't install the HP drivers provided on the HP website onto my new computer. When it asks me to connect the printer, the printer is recognized, however the message continues to say waiting for the connection. I have tried all of the suggestions listed on the forum by both HP and other individuals, including down loading the drivers from other countries. Other attempts when downloading the drivers ends up with a message saying that the download could not be completed. I have tried other USB cables and that doesn't work. I love HP products but I really need help on this one. HELP!
Regards,
Day Trader
This question was solved.
View Solution.

Hello DayTrader,
When you connect the printer and if the message continues to say "Waiting for Connection", please try the below step..
Go to Device Manager, ( to do so , Right click on Computer icon, Select Manage, from the left pance m click on Device Manager , which would display the Device Manager on right pane.)
There should be Yellow bang entries ( Yellow ! mark ) with printer name on it.
Right Click on each of them and select Update Driver.
Select "Browse my Computer for driver software "
Click on Browse button to point to the CD ( if you are using the CD to run the installation ) else copy the path where the drivers have been extracted if you had downloaded it. Usually it will be in folder with name starting 7z... under TEMP folder .
Then Click Next button .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HT4818 I can't install drivers Nvidia Geforce GT120 Boot camp windows 7

I was using windows vista in Boot Camp, but now I installed windows 7. My problem is I can't install the drivers of the Graphic card Nvidia Geforce GT120 using the CD drivers. However, I tried to download directly from the webpage Nvidia.com/drivers but at the moment to running the installation assistants, it doensn't detec any graphic hardware.
Please help me!
Thank you!

I can solve my problem! I used a programme called 3dchip that helps to the computer to recognize and install drivers!
Thank you mende1 for your time.
Nice to enter in your community!
Arn267

Can't Install. An error occurred while installing Adobe AIR

I can't install Adobe AIR. I'm getting the infamous error:
"An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
I'm the administrator of the computer.
I'm running Windows 7 Ultimate 32-bit.
I've tried the right-click-run-as-administrator solution and I'm getting the same error.
I've read Troubleshoot AIR installation | Windows and none of the solutions worked.
I'm installing the latest AIR version (I've tried older versions too)
I've tried Microsoft Install and Uninstall Fix It and AIR doesn't appear on the list of programs.
Here is my install log:
[2012-04-13:11:31:20] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2012-04-13:11:31:20] Commandline is:
[2012-04-13:11:31:20] No installed runtime detected
[2012-04-13:11:31:42] Relaunching with elevation
[2012-04-13:11:31:42] Launching subprocess with commandline c:\users\mmazza\appdata\local\temp\aira62d.tmp\adobe air installer.exe -ei
[2012-04-13:11:31:42] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2012-04-13:11:31:42] Commandline is: -stdio \\.\pipe\AIR_5604_0 -ei
[2012-04-13:11:31:42] No installed runtime detected
[2012-04-13:11:31:43] Starting silent runtime install. Installing runtime version 3.2.0.2070
[2012-04-13:11:31:43] Installing msi at c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
[2012-04-13:11:31:45] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-04-13:11:31:45] Rolling back install of c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi
[2012-04-13:11:31:45] Rollback complete
[2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-04-13:11:31:45] Runtime Installer end with exit code 7
[2012-04-13:11:31:47] Runtime Installer end with exit code 7
Hope someone can help. Thanks.

Chris, thanks for your help. Here's the log:
=== Logging started: 4/16/2012 11:16:05 ===
Action start 11:16:05: INSTALL.
Action start 11:16:05: FindRelatedProducts.
Action ended 11:16:05: FindRelatedProducts. Return value 1.
Action start 11:16:05: ValidateProductID.
Action ended 11:16:05: ValidateProductID. Return value 1.
Action start 11:16:05: SetSHAREDADDINFOLDER.
Action ended 11:16:05: SetSHAREDADDINFOLDER. Return value 1.
Action start 11:16:05: CostInitialize.
Action ended 11:16:05: CostInitialize. Return value 1.
Action start 11:16:05: FileCost.
Action ended 11:16:05: FileCost. Return value 1.
Action start 11:16:05: CostFinalize.
Action ended 11:16:06: CostFinalize. Return value 1.
Action start 11:16:06: MigrateFeatureStates.
Action ended 11:16:06: MigrateFeatureStates. Return value 0.
Action start 11:16:06: InstallValidate.
Action ended 11:16:06: InstallValidate. Return value 1.
Action start 11:16:06: SetARPINSTALLLOCATION.
Action ended 11:16:06: SetARPINSTALLLOCATION. Return value 1.
Action start 11:16:06: InstallInitialize.
Action ended 11:16:07: InstallInitialize. Return value 1.
Action start 11:16:07: ProcessComponents.
Action ended 11:16:07: ProcessComponents. Return value 1.
Action start 11:16:07: UnpublishFeatures.
Action ended 11:16:07: UnpublishFeatures. Return value 1.
Action start 11:16:07: RemoveRegistryValues.
Action ended 11:16:07: RemoveRegistryValues. Return value 1.
Action start 11:16:07: RemoveDuplicateFiles.
Action ended 11:16:07: RemoveDuplicateFiles. Return value 1.
Action start 11:16:07: RemoveFiles.
Action ended 11:16:07: RemoveFiles. Return value 0.
Action start 11:16:07: InstallFiles.
Action ended 11:16:07: InstallFiles. Return value 1.
Action start 11:16:07: DuplicateFiles.
Action ended 11:16:07: DuplicateFiles. Return value 1.
Action start 11:16:07: WriteRegistryValues.
Action ended 11:16:07: WriteRegistryValues. Return value 1.
Action start 11:16:07: RegisterUser.
Action ended 11:16:07: RegisterUser. Return value 1.
Action start 11:16:07: RegisterProduct.
Action ended 11:16:07: RegisterProduct. Return value 1.
Action start 11:16:07: PublishFeatures.
Action ended 11:16:07: PublishFeatures. Return value 1.
Action start 11:16:07: PublishProduct.
Action ended 11:16:07: PublishProduct. Return value 1.
Action start 11:16:07: InstallExecute.
MSI (s) (EC:04) [11:16:09:069]: Product: Adobe AIR -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Action ended 11:16:09: InstallExecute. Return value 3.
Action ended 11:16:10: INSTALL. Return value 3.
Property(S): ARPINSTALLLOCATION = c:\Program Files\Common Files\Adobe AIR\
Property(S): SHAREDADDINFOLDER = c:\Program Files\Adobe\Flash Player\AddIns\airappinstaller\
Property(S): UpgradeCode = {8DA920D5-C41C-42E0-BF31-87BA49984EE4}
Property(S): UC8DA920D5C41C42E0BF3187BA49984EE4 = {FDB3B167-F4FA-461D-976F-286304A57B2A}
Property(S): Resources = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\
Property(S): Version = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\
Property(S): Versions = c:\Program Files\Common Files\Adobe AIR\Versions\
Property(S): AIR = c:\Program Files\Common Files\Adobe AIR\
Property(S): CommonFilesFolder = c:\Program Files\Common Files\
Property(S): TARGETDIR = c:\
Property(S): SourceDir = c:\users\mmazza\appdata\local\temp\air5438.tmp\
Property(S): Manufacturer = Adobe Systems Incorporated
Property(S): ProductCode = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Property(S): ProductLanguage = 1033
Property(S): ProductName = Adobe AIR
Property(S): ProductVersion = 3.2.0.2070
Property(S): REINSTALLMODE = amus
Property(S): ARPSYSTEMCOMPONENT = yes
Property(S): REBOOT = Suppress
Property(S): ALLUSERS = 1
Property(S): SecureCustomProperties = ARPSYSTEMCOMPONENT;REINSTALLMODE;SHAREDADDINFOLDER;UC8DA920D5C41C42E0BF3187BA49984EE4
Property(S): MsiLogFileLocation = C:\Users\mmazza\AppData\Local\Temp\MSI46b03.LOG
Property(S): PackageCode = {496CC99A-E905-4C30-B3F0-14CB137CACAC}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): CURRENTDIRECTORY = C:\Users\mmazza\Downloads
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 1156
Property(S): VersionDatabase = 200
Property(S): VersionMsi = 5.00
Property(S): VersionNT = 601
Property(S): WindowsBuild = 7600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 1
Property(S): WindowsFolder = c:\Windows\
Property(S): WindowsVolume = c:\
Property(S): SystemFolder = C:\Windows\system32\
Property(S): System16Folder = C:\Windows\system\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\mmazza\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files\
Property(S): AppDataFolder = C:\Users\mmazza\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\mmazza\Favorites\
Property(S): NetHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\mmazza\Documents\
Property(S): PrintHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\mmazza\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\mmazza\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): Intel = 6
Property(S): PhysicalMemory = 3325
Property(S): VirtualMemory = 4304
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = mmazza
Property(S): UserSID = S-1-5-21-823518204-1563985344-842925246-12804
Property(S): UserLanguageID = 1033
Property(S): ComputerName = RGPROWS1015
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 22
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 11:16:10
Property(S): Date = 4/16/2012
Property(S): MsiNetAssemblySupport = 4.0.30319.1
Property(S): MsiWin32AssemblySupport = 6.1.7600.16385
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): USERNAME = d
Property(S): DATABASE = c:\Windows\Installer\446fe3.msi
Property(S): OriginalDatabase = c:\users\mmazza\appdata\local\temp\air5438.tmp\setup.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): ROOTDRIVE = c:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): INSTALLLEVEL = 1
Property(S): SOURCEDIR = c:\users\mmazza\appdata\local\temp\air5438.tmp\
Property(S): SourcedirProduct = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Property(S): ProductToBeRegistered = 1
MSI (s) (EC:04) [11:16:10:707]: Product: Adobe AIR -- Installation failed.
MSI (s) (EC:04) [11:16:10:720]: Windows Installer installed the product. Product Name: Adobe AIR. Product Version: 3.2.0.2070. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
=== Logging stopped: 4/16/2012 11:16:10 ===
I've tried to delete the HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids key, but I got the message "Cannot delete. Error while deleting key"

Can't install drivers. unknown error

Similar Messages

Maybe you are looking for