Can't install due to error

I have tried to update to mavericks. I had no issues downloading it, but when I tried to install it said error, try going to dis utility to repair. I tried that. It diednt work, I have also tried to go to the recovery disk utility and it hasn't worked either.what can I do?

I tried to install again to see what the exact error message was, but now all I get is a Microsoft message that says "Adobe Flash Player Installer has encountered a problem and needs to close." I have been having other problems installing other products and have been getting messages like "Entry Point Not Found" followed by messages like"entry point...could not be located in the dynamic link library".
I don't know exactly what "repaired" means in installing an OS. What I did was use my reinstall Windows OS disc and follow the instructions for a "clean" install. The prompts say that my files will be wiped out, and that programs will have to be reinstalled. When promted to pick a partition I always pick the default of a 50/50 split of the hard drive.

Similar Messages

  • Wty issue - Can't Posted due to error Action T043 Post version IV to FI

    Hi  Experts,
    I have one problem which is some of the wrty claims can't posted due to error message
    log not found (in memory ) and also Action T043 POst version IV to FI not carried out as there was an error in a previous version.
    For info, the earlier, yes this claim have error but already rectify. However still can't posted.
    Hence, request your advise how to resolve my problem...
    rgds,

    After a lot of searching I finally found the solution to my problem.  I had to enable IOMMU in the BIOS on my motherboard (Gigabyte 970A-D3). 
    In case it helps someone else, I found the solution in the following forum post:
    http://ubuntuforums.org/showthread.php?t=2114055
    Another related post is:
    http://ubuntuforums.org/showthread.php?t=2111223
    As an aside, I'm not really sure why when IOMMU is disabled, 32-bit kernels work, but 64-bit kernels don't.   I'm guessing IOMMU support is disabled in 32-bit kernels while it is enabled in 64-bit kernels.  Or, it is at least handled differently.
    Last edited by tlawren (2013-03-12 13:20:35)

  • Can't Install 11g Db, Error ORA 28547/24324/01041

    hi,
    I was trying to install db 11g and the installation stopped half way through with 3 errors.
    1.ORA 24324: SERVICE HANDLE NOT IDENTIFIED
    2.ORA 01041: INTERNAL ERROR, HOSTDEF EXTERIOR DOES'NT EXIST
    3.ORA 28547: CONNECTION TO SERVER FAILED, PROABLY NET ADMIN ERROR.
    I have just trained on oracle application developper and very new to installing a personal database.
    My machine is a pentium duo core 1.7, 2gb ram and 120 hdd and my OS is XP professional sp2. I connect through this machine
    through my office lan to oracle 9i db in my company server.
    I have tried to set up a 11i DB Personal and 10g developer suite on the same machine.
    I could figured out the 1st error ORA-01041 and understand that the Environment variables have to be changed before I try to
    reinstall 11g.
    As I checked up the variable from System>advanced>environment variables it is showing a very long string which is
    (C:\app\ravid\product\11.1.0\db_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program
    Files\Intel\Wireless\Bin\;C:\ORANT\BIN;)
    After looking this up in the c:\oracle folder trace the string only uptil 'bin'.
    I have DEVELOPER 2000 NT with Forms runtime and Graphics runtime already on the machine however i did not see any path in the
    system environment variable for this, or could it be that the string i mentioned above has that included too..one thing i know for
    sure is there was no oracle home before i tried to install the 11g db.
    Could someone also help me out with the 1st and 3rd errors as i don't know what they mean?
    Will really appreciate if you can help me through this.
    Thanks in advance for your time and advice.

    Re: Can't Install 11g Db, Error ORA 28547/24324/01041

  • Can't install due to "registry" and "dll" error messages.

    I can't install any Adobe products. This occured after a complete reinstall of my Windows XP - if that has anything to do with it. I have done a reinstall before without any problems.
    I keep getting error messages about "missing registry" and "dll"s.

    I tried to install again to see what the exact error message was, but now all I get is a Microsoft message that says "Adobe Flash Player Installer has encountered a problem and needs to close." I have been having other problems installing other products and have been getting messages like "Entry Point Not Found" followed by messages like"entry point...could not be located in the dynamic link library".
    I don't know exactly what "repaired" means in installing an OS. What I did was use my reinstall Windows OS disc and follow the instructions for a "clean" install. The prompts say that my files will be wiped out, and that programs will have to be reinstalled. When promted to pick a partition I always pick the default of a 50/50 split of the hard drive.

  • Can't Install. An error occurred while installing Adobe AIR

    I can't install Adobe AIR. I'm getting the infamous error:
    "An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
    I'm the administrator of the computer.
    I'm running Windows 7 Ultimate 32-bit.
    I've tried the right-click-run-as-administrator solution and I'm getting the same error.
    I've read Troubleshoot AIR installation | Windows and none of the solutions worked.
    I'm installing the latest AIR version (I've tried older versions too)
    I've tried Microsoft Install and Uninstall Fix It and AIR doesn't appear on the list of programs.
    Here is my install log:
    [2012-04-13:11:31:20] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2012-04-13:11:31:20] Commandline is:
    [2012-04-13:11:31:20] No installed runtime detected
    [2012-04-13:11:31:42] Relaunching with elevation
    [2012-04-13:11:31:42] Launching subprocess with commandline c:\users\mmazza\appdata\local\temp\aira62d.tmp\adobe air installer.exe -ei
    [2012-04-13:11:31:42] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2012-04-13:11:31:42] Commandline is: -stdio \\.\pipe\AIR_5604_0 -ei
    [2012-04-13:11:31:42] No installed runtime detected
    [2012-04-13:11:31:43] Starting silent runtime install. Installing runtime version 3.2.0.2070
    [2012-04-13:11:31:43] Installing msi at c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    [2012-04-13:11:31:45] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2012-04-13:11:31:45] Rolling back install of c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi
    [2012-04-13:11:31:45] Rollback complete
    [2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2012-04-13:11:31:45] Runtime Installer end with exit code 7
    [2012-04-13:11:31:47] Runtime Installer end with exit code 7
    Hope someone can help. Thanks.

    Chris, thanks for your help. Here's the log:
    === Logging started: 4/16/2012  11:16:05 ===
    Action start 11:16:05: INSTALL.
    Action start 11:16:05: FindRelatedProducts.
    Action ended 11:16:05: FindRelatedProducts. Return value 1.
    Action start 11:16:05: ValidateProductID.
    Action ended 11:16:05: ValidateProductID. Return value 1.
    Action start 11:16:05: SetSHAREDADDINFOLDER.
    Action ended 11:16:05: SetSHAREDADDINFOLDER. Return value 1.
    Action start 11:16:05: CostInitialize.
    Action ended 11:16:05: CostInitialize. Return value 1.
    Action start 11:16:05: FileCost.
    Action ended 11:16:05: FileCost. Return value 1.
    Action start 11:16:05: CostFinalize.
    Action ended 11:16:06: CostFinalize. Return value 1.
    Action start 11:16:06: MigrateFeatureStates.
    Action ended 11:16:06: MigrateFeatureStates. Return value 0.
    Action start 11:16:06: InstallValidate.
    Action ended 11:16:06: InstallValidate. Return value 1.
    Action start 11:16:06: SetARPINSTALLLOCATION.
    Action ended 11:16:06: SetARPINSTALLLOCATION. Return value 1.
    Action start 11:16:06: InstallInitialize.
    Action ended 11:16:07: InstallInitialize. Return value 1.
    Action start 11:16:07: ProcessComponents.
    Action ended 11:16:07: ProcessComponents. Return value 1.
    Action start 11:16:07: UnpublishFeatures.
    Action ended 11:16:07: UnpublishFeatures. Return value 1.
    Action start 11:16:07: RemoveRegistryValues.
    Action ended 11:16:07: RemoveRegistryValues. Return value 1.
    Action start 11:16:07: RemoveDuplicateFiles.
    Action ended 11:16:07: RemoveDuplicateFiles. Return value 1.
    Action start 11:16:07: RemoveFiles.
    Action ended 11:16:07: RemoveFiles. Return value 0.
    Action start 11:16:07: InstallFiles.
    Action ended 11:16:07: InstallFiles. Return value 1.
    Action start 11:16:07: DuplicateFiles.
    Action ended 11:16:07: DuplicateFiles. Return value 1.
    Action start 11:16:07: WriteRegistryValues.
    Action ended 11:16:07: WriteRegistryValues. Return value 1.
    Action start 11:16:07: RegisterUser.
    Action ended 11:16:07: RegisterUser. Return value 1.
    Action start 11:16:07: RegisterProduct.
    Action ended 11:16:07: RegisterProduct. Return value 1.
    Action start 11:16:07: PublishFeatures.
    Action ended 11:16:07: PublishFeatures. Return value 1.
    Action start 11:16:07: PublishProduct.
    Action ended 11:16:07: PublishProduct. Return value 1.
    Action start 11:16:07: InstallExecute.
    MSI (s) (EC:04) [11:16:09:069]: Product: Adobe AIR -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids.  System error 5.  Verify that you have sufficient access to that key, or contact your support personnel.
    Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids.  System error 5.  Verify that you have sufficient access to that key, or contact your support personnel.
    Action ended 11:16:09: InstallExecute. Return value 3.
    Action ended 11:16:10: INSTALL. Return value 3.
    Property(S): ARPINSTALLLOCATION = c:\Program Files\Common Files\Adobe AIR\
    Property(S): SHAREDADDINFOLDER = c:\Program Files\Adobe\Flash Player\AddIns\airappinstaller\
    Property(S): UpgradeCode = {8DA920D5-C41C-42E0-BF31-87BA49984EE4}
    Property(S): UC8DA920D5C41C42E0BF3187BA49984EE4 = {FDB3B167-F4FA-461D-976F-286304A57B2A}
    Property(S): Resources = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\
    Property(S): Version = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\
    Property(S): Versions = c:\Program Files\Common Files\Adobe AIR\Versions\
    Property(S): AIR = c:\Program Files\Common Files\Adobe AIR\
    Property(S): CommonFilesFolder = c:\Program Files\Common Files\
    Property(S): TARGETDIR = c:\
    Property(S): SourceDir = c:\users\mmazza\appdata\local\temp\air5438.tmp\
    Property(S): Manufacturer = Adobe Systems Incorporated
    Property(S): ProductCode = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    Property(S): ProductLanguage = 1033
    Property(S): ProductName = Adobe AIR
    Property(S): ProductVersion = 3.2.0.2070
    Property(S): REINSTALLMODE = amus
    Property(S): ARPSYSTEMCOMPONENT = yes
    Property(S): REBOOT = Suppress
    Property(S): ALLUSERS = 1
    Property(S): SecureCustomProperties = ARPSYSTEMCOMPONENT;REINSTALLMODE;SHAREDADDINFOLDER;UC8DA920D5C41C42E0BF3187BA49984EE4
    Property(S): MsiLogFileLocation = C:\Users\mmazza\AppData\Local\Temp\MSI46b03.LOG
    Property(S): PackageCode = {496CC99A-E905-4C30-B3F0-14CB137CACAC}
    Property(S): ProductState = -1
    Property(S): PackagecodeChanging = 1
    Property(S): CURRENTDIRECTORY = C:\Users\mmazza\Downloads
    Property(S): CLIENTUILEVEL = 3
    Property(S): MSICLIENTUSESEXTERNALUI = 1
    Property(S): CLIENTPROCESSID = 1156
    Property(S): VersionDatabase = 200
    Property(S): VersionMsi = 5.00
    Property(S): VersionNT = 601
    Property(S): WindowsBuild = 7600
    Property(S): ServicePackLevel = 0
    Property(S): ServicePackLevelMinor = 0
    Property(S): MsiNTProductType = 1
    Property(S): WindowsFolder = c:\Windows\
    Property(S): WindowsVolume = c:\
    Property(S): SystemFolder = C:\Windows\system32\
    Property(S): System16Folder = C:\Windows\system\
    Property(S): RemoteAdminTS = 1
    Property(S): TempFolder = C:\Users\mmazza\AppData\Local\Temp\
    Property(S): ProgramFilesFolder = C:\Program Files\
    Property(S): AppDataFolder = C:\Users\mmazza\AppData\Roaming\
    Property(S): FavoritesFolder = C:\Users\mmazza\Favorites\
    Property(S): NetHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    Property(S): PersonalFolder = C:\Users\mmazza\Documents\
    Property(S): PrintHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    Property(S): RecentFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Recent\
    Property(S): SendToFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\SendTo\
    Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
    Property(S): CommonAppDataFolder = C:\ProgramData\
    Property(S): LocalAppDataFolder = C:\Users\mmazza\AppData\Local\
    Property(S): MyPicturesFolder = C:\Users\mmazza\Pictures\
    Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
    Property(S): DesktopFolder = C:\Users\Public\Desktop\
    Property(S): FontsFolder = C:\Windows\Fonts\
    Property(S): GPTSupport = 1
    Property(S): OLEAdvtSupport = 1
    Property(S): ShellAdvtSupport = 1
    Property(S): Intel = 6
    Property(S): PhysicalMemory = 3325
    Property(S): VirtualMemory = 4304
    Property(S): AdminUser = 1
    Property(S): MsiTrueAdminUser = 1
    Property(S): LogonUser = mmazza
    Property(S): UserSID = S-1-5-21-823518204-1563985344-842925246-12804
    Property(S): UserLanguageID = 1033
    Property(S): ComputerName = RGPROWS1015
    Property(S): SystemLanguageID = 1033
    Property(S): ScreenX = 1024
    Property(S): ScreenY = 768
    Property(S): CaptionHeight = 22
    Property(S): BorderTop = 1
    Property(S): BorderSide = 1
    Property(S): TextHeight = 16
    Property(S): TextInternalLeading = 3
    Property(S): ColorBits = 32
    Property(S): TTCSupport = 1
    Property(S): Time = 11:16:10
    Property(S): Date = 4/16/2012
    Property(S): MsiNetAssemblySupport = 4.0.30319.1
    Property(S): MsiWin32AssemblySupport = 6.1.7600.16385
    Property(S): RedirectedDllSupport = 2
    Property(S): MsiRunningElevated = 1
    Property(S): Privileged = 1
    Property(S): USERNAME = d
    Property(S): DATABASE = c:\Windows\Installer\446fe3.msi
    Property(S): OriginalDatabase = c:\users\mmazza\appdata\local\temp\air5438.tmp\setup.msi
    Property(S): UILevel = 2
    Property(S): ACTION = INSTALL
    Property(S): ROOTDRIVE = c:\
    Property(S): CostingComplete = 1
    Property(S): OutOfDiskSpace = 0
    Property(S): OutOfNoRbDiskSpace = 0
    Property(S): PrimaryVolumeSpaceAvailable = 0
    Property(S): PrimaryVolumeSpaceRequired = 0
    Property(S): PrimaryVolumeSpaceRemaining = 0
    Property(S): INSTALLLEVEL = 1
    Property(S): SOURCEDIR = c:\users\mmazza\appdata\local\temp\air5438.tmp\
    Property(S): SourcedirProduct = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    Property(S): ProductToBeRegistered = 1
    MSI (s) (EC:04) [11:16:10:707]: Product: Adobe AIR -- Installation failed.
    MSI (s) (EC:04) [11:16:10:720]: Windows Installer installed the product. Product Name: Adobe AIR. Product Version: 3.2.0.2070. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
    === Logging stopped: 4/16/2012  11:16:10 ===
    I've tried to delete the HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids key, but I got the message "Cannot delete. Error while deleting key"

  • HT1926 new version of itune can not install due to old version of itune can not be removed

    can not install itune due to old  version of itune can not be removed

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Hi i am trying to install itunes and it wont install due to error code 2349 how do i fix this issue

    i have tryed on numerous occasions to install itunes and it sometimes installs but then i cant use it due to error code 2349, so i uninstall and try again and wont install it at all due to error code 2349 please help i really eant to use my ipod

    Refer to this thread:
    https://discussions.apple.com/thread/3174150?start=0&tstart=0

  • Photoshop Camera Raw 7.4 Update is not installing due to error code U43M1D207.  What needs to be done to resolve this error code?

    The automatic update feature of Photoshop Camera Raw 7.4 is not installing properly due to error code U43M1D207.  Please advise on how to resolve this issue.

    If you need to post again, please keept the following in mind:
    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Can't install due to password issue

    I've reset the password 3X and still can't download due to password issue. Help!

    This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
    If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt.  If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
    If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
    If you're still stumped, you may need to reset the password on your Mac:
    http://support.apple.com/kb/PH18653
    http://support.apple.com/kb/PH14325
    http://support.apple.com/en-us/HT201240

  • Can't install Lightroom 4 Error 18501

    Can't install lightroom 4.  Error is 18501.  Says I need to update explorer, adobe flash, etc.  I went through all that.  I have Explorer 10.  I have latest adobe flash, etc.  Have Windows 7.  Had a disk of LR4.  Installed.  Clicked on shortcut it made.  Asked to purchase a license.  Then it said I needed all these things I just mentioned and keeps reporting same error 18501.

    Sounds liek something is blocking the relevant components. Turn off any extras like security tools and other utilities.
    Mylenium

  • Can't install new release - Error 2753 Ref pxsetup.exe ?

    I ran into problems trying to uninstall Lightroom Beta. In the end, I did a manual delete, followed up by a "regedit" search for anything 'Lightroom' had left behind in the registry. Then I swept the machine using Ccleaner (great free utility at www.ccleaner.com).
    Despite all my best efforts, I can't get the new version to install. (I wanted to install the trial version and then register it within the 30 day period).
    I keep getting an error message part way through the actual install process saying:
    Error 2753: The file pxsetup.exe is not marked for installation.
    To try and resolve this I've tried installing direct from the Adobe site using the run command, but get the same problem?
    I've also tried switching off my Firewall/Anti virus software during the install process. That didn't help either.
    I tried ringing Adobe saying I wanted to install and buy their product, but they refuse to give any assistance to anything Beta related! Because of this problem I can't install and register. As I'm not registered, I can't get any help from Adobe product support?
    I would be very much appreciate any help or suggestions. Thanks, Paul

    The other thread on this in which you participate may be the better place to centralize info.
    Paul Bright, "LR will not install!" #4, 15 Mar 2007 11:41 am

  • Can't install drivers. unknown error

    gents,
    I suddenly can't install drivers so that my new iLok and my Logitech USB-Dongle aren't working. I did a backup of all drivers from another Win7x64 systemdrive and extracted them. The Drivers were working on that system and am there.
    Still I got a FILE NOT FOUND or similar error.
    I checked the SETUPAPI.DEV.LOG which I copied below. Can anyone see what's the problem with the iLok driver f.e. ?
    [Device Install Log]
    OS Version = 6.1.7601
    Service Pack = 1.0
    Suite = 0x0100
    ProductType = 1
    Architecture = amd64
    [BeginLog]
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    . inf: {SetupCopyOEMInf: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.097
    . sto: {Import Driver Package: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.098
    . sto: Importing driver package into Driver Store:
    . sto: Driver Store = C:\Windows\System32\DriverStore (Online | 6.1.7601)
    . sto: Driver Package = d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf
    . sto: Architecture = amd64
    . sto: Locale Name = neutral
    . sto: Flags = 0x00000000
    . sto: Copying driver package files to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'.
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
    . flq: SourceFilename - 'ilok-x64.cat'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
    . flq: SourceFilename - 'WdfCoInstaller01007.dll'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
    . flq: SourceFilename - 'oem43.inf'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
    . flq: SourceFilename - 'iLokDrvr.sys'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {_commit_file_queue}
    . flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=4
    . flq: {_commit_copy_subqueue}
    . flq: subqueue count=4
    . flq: source media:
    . flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok]
    . flq: SourceFile - [ilok-x64.cat]
    . flq: Flags - 0x00000000
    . flq: {_commit_copyfile}
    . flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\ilok-x64.cat'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
    . flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\ilok-x64.cat'
    . flq: {_commit_copyfile exit OK}
    . flq: {_commit_copyfile}
    . flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
    . flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\oem43.inf'
    . flq: {_commit_copyfile exit OK}
    . flq: source media:
    . flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
    . flq: SourceFile - [WdfCoInstaller01007.dll]
    . flq: Flags - 0x00000000
    . flq: source media:
    . flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
    . flq: SourceFile - [WdfCoInstaller01007.dll]
    . flq: Flags - 0x00000000
    . flq: {_commit_copyfile}
    !!! flq: Error installing file (0x00000002)
    ! flq: SourceFile - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll'
    ! flq: TargetFile - 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'
    . flq: {SPFQNOTIFY_COPYERROR}
    !!! sto: Failed to copy file 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll' to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'. Error = 0x00000002
    . flq: {SPFQNOTIFY_COPYERROR - returned 0x00000000}
    !!! flq: SPFQNOTIFY_COPYERROR: returned SPFQOPERATION_ABORT.
    . flq: {_commit_copyfile exit(0x000003e3)}
    . flq: {_commit_copy_subqueue exit(0x000003e3)}
    !!! flq: FileQueueCommit aborting!
    . flq: {_commit_file_queue exit(0x000003e3)}
    !!! sto: Failed to copy driver package to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'. Error = 0x00000002
    . sto: {Import Driver Package: exit(0x00000002)} 21:18:40.125
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    ! inf: Add to Driver Store unsuccessful
    !!! inf: returning failure to SetupCopyOEMInf
    . inf: {SetupCopyOEMInf exit (0x00000002)} 21:18:40.251
    !!! ndv: Driver Package import failed for new device...installing NULL driver.
    . dvi: {Plug and Play Service: Device Install for USB\VID_088E&PID_5036\3088A22A_7C39126D}
    . ump: Creating Install Process: DrvInst.exe 21:18:40.266
    ! ndv: Installing NULL driver!
    . dvi: Set selected driver complete.
    . dvi: {DIF_ALLOW_INSTALL} 21:18:40.333
    . dvi: No class installer for 'iLok'
    . dvi: No CoInstallers found
    . dvi: Default installer: Enter 21:18:40.334
    . dvi: Default installer: Exit
    . dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 21:18:40.334
    . dvi: {DIF_INSTALLDEVICE} 21:18:40.334
    . dvi: No class installer for 'iLok'
    . dvi: Default installer: Enter 21:18:40.335
    ! dvi: Installing NULL driver!
    . dvi: Writing common driver property settings.
    . dvi: {Restarting Devices} 21:18:40.351
    . dvi: Restart: USB\VID_088E&PID_5036\3088A22A_7C39126D
    . dvi: Restart complete.
    . dvi: {Restarting Devices exit} 21:18:40.562
    . dvi: Default installer: Exit
    . dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 21:18:40.563
    . ump: Server install process exited with code 0x00000000 21:18:40.567
    . ump: {Plug and Play Service: Device Install exit(00000000)}
    . ndv: {Update Driver Software Wizard exit(00000002)}

    update. I also post the SETUPAPI.APP.LOG:
    [Device Install Log]
    OS Version = 6.1.7601
    Service Pack = 1.0
    Suite = 0x0100
    ProductType = 1
    Architecture = amd64
    [BeginLog]
    [Boot Session: 2014/12/29 20:54:19.610]
    >>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
    >>> Section start 2014/12/29 21:18:39.855
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    cpy: Policy is set to make all digital signatures equal.
    <<< Section end 2014/12/29 21:18:39.857
    <<< [Exit status: SUCCESS]
    >>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
    >>> Section start 2014/12/29 21:18:39.862
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    cpy: Policy is set to make all digital signatures equal.
    ! sig: Verifying file against specific (valid) catalog failed! (0x80096002)
    ! sig: Verifying file against specific Authenticode(tm) catalog failed! (0x800b0100)
    <<< Section end 2014/12/29 21:18:40.093
    <<< [Exit status: SUCCESS]
    >>> [DIF_SELECTBESTCOMPATDRV - USB\VID_088E&PID_5036\3088A22A_7C39126D]
    >>> Section start 2014/12/29 21:18:40.093
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    <<< Section end 2014/12/29 21:18:40.093
    <<< [Exit status: SUCCESS]

  • Can't install CC desktop error Analytics.dll

    Hello can't install de Creative Cloud Desktop!
    Application Name Error : Creative Cloud.exe Version : 2.8.1.451 , time stamp : 0x543e8b4e
    Name of module error: Analytics.dll , Version : 2.8.0.449 , time stamp : 0x543c7dc6
    Exception code: 0xc0000005
    Error Offset: 0x0001d5a2
    ID of process error: 0x980
    Start time of application with error: 0x01d00edc9a0ba8bc
    Path to application with error: C: \ Program Files (x86) \ Adobe \ Adobe Creative Cloud \ ACC \ Creative Cloud.exe
    Path to module error: C: \ Program Files (x86) \ Adobe \ Adobe Creative Cloud \ CoreExt \ Analytics.dll
    Report ID : 1c1bcffe - 7ad0-11e4 - a91c - 64315022f828
    I am ADMIN on WIN7, x64

    Try to delete Adobe Creative Cloud once.
    Also delete OOBE and Adobe Application Manager from
    C:\Program Files (x86)\Common Files\Adobe
    Then try to re-install once

  • Windows Phone 8.1 "Can't Install Company App" Error

    I'm using VS2013 Update4 to build a Windows Phone 8.1 application.  I can deploy the app from Visual Studio with no problem.  My developer phone is unlocked.   My company
    has a certificate from Symantec.  I have the pfx file.  We don’t want to use the Windows store. 
    I am simply trying to test that the appx file can be installed (sideloaded?). 
    I've followed the Microsoft guidelines to optimize and sign the appx file.  I've created an aetx file from the pfx.  I put the aetx file and the appx file on the phone.  I tap the aetx file and it says : "Add
    workplace account?” Would you like to add the workplace account for the xxx Company?" 
    I click add and nothing really happens (I'm not sure what should happen).  Then I tap the appx file and it says :  "can’t install company app". 
    Any suggestions?  Thanks!

    This appears to be a signing issue of some sort.  Our Symantec certificate is registered to the company name, which is 4 words with spaces in between the words.  If I understand correctly, the  Identity in the appxmanifest must match this
    name on the certificate.
    However, according to  msdn.microsoft.com/en-us/library/windows/apps/br211441.aspx 
    the identity must be
    A string between 3 and 50 characters in length that consists of alpha-numeric, period, and dash characters.
    Does anyone else have a space in their company name?  How do you fix this?  Thanks!

  • Please Help!  Can't install iTunes! Errors 1406, 1402, 1603

    I'm using Windows XP on my home laptop and I get the following error messages when trying to install iTunes:
    1) Error 1406. Could not write to value key \Software\Classes\.cdda\OpenWithList\iTunes.exe. Verify that you have sufficient access to that key, or contact your support personnel.
    2)Error 1402. Could not open key: HKEYLOCALMACHINE\Software\Classes\.cdda\OpenWithProgids. Verify that you have sufficient access to that key, or contact your support personnel.
    3) Error: -1603 Fatal Error during installation. Consult windows installer help (Msi.chm) or MSDN for more info

    These might help some.... At least until b shows up.
    For: Error 1607; Error 1608; Error 1628; Error 1628; Error 1406; Error 1324; Error 1606; Error 1327; Error 1335:
    Getting help with iPod and iTunes for Windows Installation errors
    Another Possible Solution to Error 1406:
    http://reviews.cnet.com/5208-6142-0.html?forumID=31&threadID=46127&messageID=642 456

Maybe you are looking for