Can't Install Enhanced USB Host Controller

I keep getting these popups each time that I load windows xp that its found some new hardware for the USB 2. The hardware is the Universal Serial Bus Controller. However it does mention Intel 82801EB USB 2 Enhanced Host Controller -24DD. I let it search for the needed drivers but it never finds them or there is something else wrong. I keep getting "An error occurred during installation of the device. The data is invalid". Whatever in the hell that means!!! Any clues? I'm running the 875P Neo board.

Well the drivers for the other USB drivers were automatically installed when I installed Windows XP. The USB 2 drivers however are not installed for the hardware even though the hardware is recognized. I have the SP1 update installed. Here is what happens: when I load windows this screen comes up:
http://www.angelfire.com/space2/tmoum/newhrdwr.JPG
I press next and after a few seconds (takes longer if the MSI CD is in the CD-rom) and this screen comes up:
http://www.angelfire.com/space2/tmoum/newhrdwr2.JPG
I'm not sure where the drivers for the device are located so I just let windows search for them but this doesn't seem to work.
Here is what my Device Manager looks like:
http://www.angelfire.com/space2/tmoum/Devicemngr.JPG
When I click on the properties of the Universal Serial Bus Controller this is what I see:
http://www.angelfire.com/space2/tmoum/USB_contrl1.JPG
and
http://www.angelfire.com/space2/tmoum/USB_contrl2.JPG

Similar Messages

KT4VL USB Host controller Problems

I have a KT4VL (MS-67212) and am having problems with the USB Host controller. I am running Win 98SE. This happens wether or not I have any USB devices installed. I have taken out all installed add on cards and tried and still get the same problem.
If I reboot the computer with the USB Host Controller installed, it won't boot. It goes into safe mode where I can uninstall the USB host controller. I can then reboot fine.
Every time I reboot though the hardware detector pops up saying that I need to install the drivers for the USB host controller. If I install them, then everything works fine, all USB devices are found and and function perfectly. That is, until I reboot and it goes to safe mode.
It has the 1.1 bios in it. I didn't install a floppy drive in this PC so I can't flash it at this time, if that is what I need to do.
Can anyone help?
Thanks,
KTGBP

I have a Satellite C855D-S5320. I had my hard drive crash. I installed windows7 64 bit. All the drivers work except the USB Controller. just the Usb ports on the right side of the unit do not work. one of them is a USB 3. I tried all the driver updates off your web site, I tried windows driver search, I tried driver Genius program too. I also ran a diognostic on the motherboard, it shows all working fine. I upgraded the bios and checked settings there as well. Please help if you can, Tom
Attachments:
IMG_0071.JPG ‏452 KB

USB Host controller missing in device manager

Hello,
I've installed WIN 7 64 bit on my laptop; everything worked fine at the beginning; but after a couple of days, after a system update, all of the 4 USB ports stop working
In device manager there is no USB Host controller entry, and I have four device named "Multifunction device" marked in error
Already tried without success:
- update device driver autosearch online
- uninstall device and reboot; the system can't find proper drivers
- reinstall all drivers from HP driver update utility
- reinstall drivers with Intel driver update utility
- reinstall windows (no reformat)
- other driver search utilities
I can rule out an hardware problem because if I boot from CDROM or even usb keys, they work properly; given this fact, if I reformat the disk probably I could fix the problem I guess, but I prefer avoid this extreme solution, I use this laptop for my job and I have lot of customer network and VPN configured.
Thanks

After following the Apple instructions on how to install Boot Camp on my MacBook, I had similar problems. I received the following non-functional driver list:
Bluetooth USB Host Controller
Coprocessor
Ethernet Controller
Network Controller
SM Bus Controller
Video Controller (VGA Compatible)
I tried running the repair feature from the OSX disc, no help. It may be noteworthy that I installed XP Professional SP3 straight off of an install disc, and did not do the following:
Install SP2
Install Boot Camp 2.1
Update to SP3
I am currently downloading Boot Camp 2.1 and hope that it will solve this problem. If anyone can help, please let me know!
Cedric

USB Host Controller not recognized by Windows 7.

Just installed Windows 7 in a1130n desktop. The USB Host Controller and the Std USB Host Controller are not recognized by the operating system. The USB ports and the media memory ports on the front panel will not work.

My HP Z400 is suffering from the same problem. Did you discover a solution?

Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
A device is not working properly
Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
Open Device Manager
Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
Switch to the Driver tab, click Update driver and follow the instructions
When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
How do I update the driver to stop receiving the error?
This question was solved.
View Solution.

I have solved the initial problem.
I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

USB host controller

How do you download a hi-speed USB host controller?

The question is better served with another question. You need a system with usb2.0 ports or better.
Does your computer model (unknown, as you did not state it) have USB1 or USB2 ports?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

What is apple Bluetooth USB host controller?

I want to know functinalty of apple bluetooth usb host controller. What exactly it does ?

can you please provide some link regarding this? so that i can get information about it.

Satellite Pro 6100 - USB host controller

usb host controller

Hello
And what do you want to know about USB host controller? Do you need drivers or have you problems with USB ports?
Please explain your problem detailed in some English sentences that other users here can help you.

Standard USB Host Controller

Hi,
The USB connection used for connecting to a printer failed. Trying to fix it I removed the Standard USB Host Controller Port_#0001.Hub_#0009 and as a result the device is now marked as "unknown device" with status= error#43.
How can I fix it?
Thanks, Eitan
This question was solved.
View Solution.

Thank you for the prompt reply. I have followed the following steps (from Microsoft support forum) but it didn't solve the problem:
Lets reinstall the USB Controllers.
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue” if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
All usb driver items restored correctly with the exception of one line that still shows "unknown device", with the following details:
Standard USB Host Controller
Port_#0001.Hub_#0009
Error 43
What else can I do?

I have a Leopard DL disk & bought an external CD drive, but I read that I can't install through USB?

I also have a Leopard DL disk and having the same problem with my eMac. I bought an external CD drive, but I read that I can't install through USB. Why is that? Would a USB A female to FireWire IEEE 1394 6P converter work? Or do I have to buy another CD drive with a FireWire? Please help.
PS
Can you also please explain how to boot from an external drive? (CD drive and storage device). Is there even a way to save the disks content to an external memory device and install it from there?
Message was edited by: Edz2
<Re-Titled By Host>

Hi,
Very few PPC Macs can boot from USB, most require Firewire... BUT, all 3 of my eMacs can & do boot from USB, try holding the alt or option key at bootup.
A USB<->FW converter will not work.

Problem in USB-IF xHCI USB Host Controller

Dear,
I hope that you will be fine. My name is Rana Imran and i am using HP ENVY Ultrabook 6-1106tx with Windows 8.1.
I think i have driver problem in USB-IF xHCI USB Host Controller. I am sending you pictures of problem. Please solve this problem.
Thanks
This question was solved.
View Solution.

Hi,
The first suggestion I'd make is to try downloading and reinstalling the switchable graphics driver on the following link as it lists a fix for WIDI.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114949-1&cc=us&dlc=en&lc=en...
When the reinstallation has com[pleted, restart the notebook.
If you find this has not corrected the issue, try the download available from Intel on the link below.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23861&lang=eng&ProdId=3227
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

T430S device manager: USB-IF x HCI USB host controller is not working properly

Hi ,
How to change get ride off the exclamatory mark on this device:
Problem:
Device manger Intel WiUSB: USB IF x HCI USB Host Controller always has the exclamartory mark on it.
Device status: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Pls help, thanks.

Hey there wche5,
I found some information over on this thread may be beneficial to your situation. This controller enables USB over wireless as part of the Intel (WiDi) Wireless Display function. To obtain a fix you will need to go to the Intel Site, and run the Intel Driver Update Utility. This should identify any Intel drivers you have that are out of date, including the WiDi driver.
Other threads on the forums point directly to this driver by Intel that typically resolves the problem, found on this thread at the end.
I hope this able to assist you in getting a solution to your issue, Thank You wche5!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Portege S100: Can't install Toshiba SD Host to use Toshiba Bluetooth SD Card2

I'm trying to install the Toshiba Bluetooth SD Card2 onto my Portege S100 but I can't get it to work, i get the error
"Could not open the Bluetooth ACPI device driver (tosrfec.sys). Try again?)
which suggests that the SD slot is not reading the card. I then went onto the Toshiba bluetooth section and found the driver files for the Toshiba SD Host Controller Driver (at http://aps.toshiba-tro.de/bluetooth/). I believe that I should install this as the Host Controller Driver, and not the SDA Standard Compliant SD Host Controller.
However, when i try to update the Driver, selecting specifically the folder of the Toshiba Host Controller Driver, it says that it couldn't find a better match than the one installed already. Therefore, I decided to install it manually, but instead, i get the error
"The specific location does not contain any information about your hardware"
I've run out of ideas, can anyone help me please?
Thank you
Regards
Danh

yes, thank you but
which suggests that the SD slot is not reading the card. I then went onto the Toshiba bluetooth section and found the driver files for the Toshiba SD Host Controller Driver (at
http://aps.toshiba-tro.de/bluetooth/). I believe that I should install this as the Host Controller Driver, and not the SDA Standard Compliant SD Host Controller.
However, when i try to update the Driver, selecting specifically the folder of the Toshiba Host Controller Driver, it says that it couldn't find a better match than the one installed already. Therefore, I decided to install it manually, but instead, i get the error
"The specific location does not contain any information about your hardware"
Danh

Unable to install GPIB USB hs controller on Windows 8

When I try to install the GPIB USB HS controller on my laptop, which has Windows 8 64 bit, the installation does not work. Every thin goes smooth until the progress windows then nothing happen even if I wait for ages. When I used the same CD on the desktop, which has W7 32 bit, I managed to install the driver. According to the datasheet the controller is compatible with W8 but not sure 32 or 64. Do you think this is the issue or there is something else going wrong?

Did you check your uac settings?
We found out that with default uac settings in win7 64 bit the install does not work.
In the line you can type in win7 (I'm not sure about 8) uac and press enter.
Then check the user access settings and make sure they are as low as possible
greetings from the Netherlands

What can I install on WS2012 Host when Hyper-V is installed ?

Hi,
I think , that my question is very simple, but I couldnt find answer to everything I need.
I have one host where WS2012 R2 Std is installed with Hyper-V role only. Then I have 2 VMs installed on this host. So, my WS2012 license covers everything If I am right.
I would like to install some other software on Hyper-V host but Iam not sure If I can do it. For example, APC management tool, Backup Exec V-Ray 2014 media server with SQL database, Dell Server Administrator, Nagios NSClient.. Let`s say that all software
belongs to category "support/backup tools"
If I understand correctly, I can`t install any other role if Hyper-V is installed on this host. But what about other software? I want to be 100% compliant with the licensing.
Many thanks for your answers!

For example, APC management tool, Backup Exec V-Ray 2014 media server with SQL database, Dell Server Administrator, Nagios NSClient.. Let`s say that all software belongs to category "support/backup tools"
You are right about trying to assure they are "support/backup tools", but you left one phrase off. It should be "support/backup tools for the Hyper-V host". If any of these tools are used for purposes other than managing the
Hyper-V host, then that would use one instance of the rights of the license.
. : | : . : | : . tim

Can't Install Enhanced USB Host Controller

Similar Messages

Maybe you are looking for