Can't install evaluation copy of LabView 8.0

The evaluation copy of Labview 8 will not install.  It starts and then fails with the following error:
Error 1402: "Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\LVDB.Application\CLSID."
This register key exists on my machine and I can open it with "regedit".  What's wrong?

I just searched ni.com for "1402" and the first link that came up was a KnowledgeBase entry describing this problem and how to fix it.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

  • Can I install one copy (license) of Elements on both my Macbook and my Windows PC?

    Can I install one copy (license) of Elements on both my Macbook and my Windows PC? The software comes with both disks.

    Interesting. After posting this question I had an "Online Chat" with Adobe. I was told that the license allows up to two installations on the same operating system but not one of each. After hearing this I found the clause in the agreement that stated this.
    Obviously I do not believe that this is a customer focused policy.

  • I bought a macbook pro with Mountain Lion installed.  Can I install a copy of mountain lion on my other mac for free?

    I bought a Macbook pro with Mountain Lion. Can I install Mountain Lion on my other mac for free? How do I do that? Thanks!

    On the bright side, it's only $20.
    And I would certainly like to have the ownership (and even a copy of the installer on my archive drive), "just in case."
    Here are some questions -- which I cannot test because it's not my situation:
    Has anyone acquired a pre-owned Mac with Mountain Lion installed but which shipped with an earlier OS version? For those in that circumstance:
    Have you been able to apply Mountain Lion update(s)?
    How about reinstall ML with Recovery HD?
    After either updating or reinstalling, does ML appear in Purchases in App Store?
    Just curious.

  • How can I install my copy of PSE on my netbook which doesn't have a disc drive?

    How can I installl my copy of PSE on my netbook which doesn't have a disc drive?

    Another user just asked this same question.  Please see the response at http://forums.adobe.com/thread/1041098.

  • MY COMPUTER IS DEAD, HOW CAN I INSTALL ANOTHER COPY OF ITUNES NOW?!

    Hello all,
    pls pls plsssss I really need your help!
    I had ITunes on my pc, unfortunatly the HD is ruined, old pc gone dead, so now if I try to install ITunes on my new pc- it won't sync with my Ipod, and I won't be able to update my playlists!!!!
    big vacation coming up, and I really need my Ipod organize... so do your best and try to solve this one for me...
    thanks!

    You can download & install it from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html then activate it with your serial number.

  • I can't install a copy on my laptop

    I tried to install a copy of Lightroom on my laptop and after I inserted the serial number, a red x appeared. I am currently in Europe and need to install the software on my laptop. Why won't this work?

    Hi jsd2014,
    Please refer below mentioned link to download  CS5
    Link  : Download CS5 products
    Install CS 5 : Install Adobe Creative Suite 5
    Thanks,
    Atul Saini

  • Can i install a copy of photoshop cs6 on my laptop

    This year I downloaded Photoshop CS6 for my desktop and now want to add a copy to my laptop.  Please tell me how to do this.  Thanks.

    Just install it the same way you did for the desktop.  If you need to download the installation files, they can be found thru the following page.
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • Can't install german ver. of LabVIEW 6i

    At the very beginning (after clicking "start installation") of the
    installation of the german academic version of LabVIEW 6i on
    Win2000(german), "Windows Installer" gives an error message like:
    "Fehler bei der Anwendung von Transformen. Sind Sie sicher, dass die
    angegebenen Transformpfade richtig sind?". My (bad) translation of
    this message is: "Error by using (Transformen). Are you sure that the
    defined (Transformen)-paths are allright?". The installation of the
    english or an older german version (5.0) is no problem. Does anyone
    know the problem? What can I do?
    I would be very lucky to be able to use LabVIEW 6i in german!

    Simon Linder wrote:
    > At the very beginning (after clicking "start installation") of the
    > installation of the german academic version of LabVIEW 6i on
    > Win2000(german), "Windows Installer" gives an error message like:
    > "Fehler bei der Anwendung von Transformen. Sind Sie sicher, dass die
    > angegebenen Transformpfade richtig sind?". My (bad) translation of
    > this message is: "Error by using (Transformen). Are you sure that the
    > defined (Transformen)-paths are allright?". The installation of the
    > english or an older german version (5.0) is no problem. Does anyone
    > know the problem? What can I do?
    > I would be very lucky to be able to use LabVIEW 6i in german!
    Hi Simon,
    why don't you just call the support in munich? They usually find out very
    fast wh
    ats wrong, by no cost.
    The other thing is, for installing the regionized version of LabVIEW,
    Nidaq has to be installed in the same language. Mustang ( at another
    place in this tread) posted how to check this. So if you have a previous
    NiDAQ istalled in another language, this might be the problem.
    Good luck,
    Rainer

  • KT4U-FISR Can't install OS (copy fail)

    OK, I'm at the end of my rope here. I'll try to list all I've done, but Im' sure I'll miss some of it.
    MSI KT4 Ultra-FISR
    AMD 1600+
    Crucial RAM
    WD harddrives
    Lite-on CD-RW and DVD-ROM
    PCI Grahpics card (Matrox)
    400W AMD Certified power supply.
    Problem:
    Installing Win2K or WinXP on the machine on a WD 30 gig drive. (brand new install, not and upgrade) During the copy files process it will say "error copying file XXXX.XXX If you are installing from a cd-rom, your disc may be damaged. " I can then skip, or try again. If I skip, another file does the same thing, and eventually I get the BSD. This is all in the setup process.
    I've tried installing both 2K, and XP, from the CD-RW and DVD-ROM.
    I booted with an 98 disc, formated the drive, copied the i386 over to it manualy, and ran the setup from there, same error. The DOS Xcopy works fine though.
    Updated the BIOS to the most current version.
    I've toggled about every BIOS option I can, from caching, to none, shadowing, to none.
    I've tried it with the HD on the Serial ATA with adapter, the promise Raid controller with a 80pin cable, and the standard ata-133 controller with an 80 pin cable. I've tried 2 different sets of cables. I also tried a different WD 30 gig drive.
    I tried 3 different sticks of RAM, all Cruical PC2100 256MB sticks. I tried having all 3 in, 2 in, or 1.
    The CPU is an AMD 1600+ Not over clocked, and running very cool.
    Only thing in the PC is the PCI Video Card (slot 3)
    It will not even power ON with a AGP card in the slot.
    Thats most of it I think. Now, I say the board is bad:
    1. Won't power on with AGP card installed
    2. All the data transfer issues happen no matter which controller I use.
    I'm really at the end of my wits here, any help is appreciated.
    Murdock
    *Note  Apparently this is the same CRC error, changed title of the post.

    OK, what do I do then?
    I've read through all the troubleshooting threads you have up.  Nothings worked:
    1.  Tried 3 different sticks of RAM
    2.  Volcano 7+ Solid copper heatsink, CPU temp is at 34-35C  using white paste
    3.  400W Certified PS, with 20A on the 3.3V circuit
    4.  CPU is at 133FSB
    5.  BIOS was flashed to 1.3
    I'm going to clear the BIOS again tonight, change only the FSB and see how things go.  If this doesn't work, the board is going back, and I'm switching.
    I have never had this much trouble with a MB, and I've been building these since '93.
    Murdock

  • Can't install 2nd copy of Photoshop CC

    Hello, I've just purchased a photoshop CC and couldn't install the 2nd copy on my home Mac.
    Creative Cloud keeps telling me that I got the latest version of Photoshop CC installed but I don't have it actually, I have never downloaded it on my home Mac.

    http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

  • Can i install fresh copy of lion on Mac without any requirement.

    I have a MacBook pro 15ich core i5. i want to install fresh lion on my system without any requirement means without snow leopard. i had downloaded a lion from app store . how do i install fresh lion on my system . thnx

    First, backup your system.
    Reboot your system, press and hold the Command-R keys at the boot chime to enter the Recovery HD. From there you can use Disk Utilities to erase your Macintosh HD and then reinstall Lion. You will need an internet connection and I can't remember if you'll be prompted for your Apple ID and password prior to Lion downloading.

  • Can't install DAQmx 8 with LabVIEW 8

    I installed LabVIEW 8 on a test PC yesterday as well as a bunch of stuff from the device drivers CDs.  I openeed LabVIEW today, and there was no DAQmx palette   I manually started the Device Drivers CD installer to try to install DAQmx 8, and it won't let me select it - apparently "This feature is incompatible with products already installed on this computer" - see screenshot here: http://forums.lavag.org/index.php?showtopic=2864
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

    Forget it - an uninstall and reinstall of DAQmx seems to have solved it (for now...)
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Can I install a copy on another computer?

    I bought CS6 some time ago for my macpro and installed it via download.  Can I now download it to my macbook pro on the same account, or do I have to buy it all over again?

    your single user license permits up to two concurrent installations/activations.
    just download the trial and activate with your serial number, http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • How many computers can I install my copy of snow leopard on?

    As the title suggests!
    Can anyone advise please?

    Five in your household, that is. Apple sells volume licenses if you need multiple copies for a business.

  • Just bought mac 10.8.4 I have cs5extended but can't install cs2 to upgrade my cs5extended copy, help

    Just bought mac 10.8.4 I have cs5extended but can't install cs2 copy to upgrade my cs5extended copy, help any idea's please :-)

    You can install CS5 directly on your computer.  You will be asked to enter an eligible serial number during the installation process.  This is when you will want to enter the CS2 serial number.

Maybe you are looking for