Can't install final cut pro trial version 10.0.6

hello, i can't insatll the trial version of final cut pro 10.0.6
after downloading and agreeing, there comes an information that the disk image is destroyed. i tried downloading it many times on different machines but the problems stays the same. please, help!

I'm downloading the trial from apples website. you can't download the trial from the App Store. And I am sure it is not the connection problem. I can download other things at the same time and they work fine. I read somewhere that others had the same problem. It must be on Apple's side, but what is the problem - i can't find the answer.

Similar Messages

  • I CAN'T INSTALL FINAL CUT PRO 3 ON MY NEW INTEL IMAC, HELP!!!

    I'm trying to install FINAL CUT PRO 3 onto my new iMac but can't. It reads the disk but then says, "Original disk needed for install." I have the original disk, I own a registered copy of the program, so I'm stuck.

    Hi -
    I believe Final Cut 5 is designed to run on a Power PC CPU machine, the current MacBooks use Intel chips - so the software will not install on your Intel based MacBook.
    You can, however, upgrade from a full version of Final Cut 5 to Final Cut Studio 3 which contains the latest version of FCP, version 7 as well as Compressor, Color, Soundtrack Pro and Motion for $299 which is a steal as the full version for Final Cut Studio 3 is $999.
    You only need the serial number of the full version (non-academic or non-upgrade version) to do the FCS 3 upgrade - you don't need to have FCP 5 loaded on your machine to make the upgrade work.
    Hope this helps.
    MtD

  • Can't install final cut pro 5.0/erased my old final cut

    I just got final cut studio and the option for installing final cut pro is inaccessible. When it finished installing (said it was successful), my old version of final cut was gone and the new version was not installed.
    What do I do because when I go to reinstall it, it wont let me install it (says skip)?

    Hi Jerry,
    Thank you for your quick response. I called the hotline and it is closed until 6am tomorrow. Below are my specs:
    Hardware Overview:
    Machine Name: Power Mac G4 (AGP graphics)
    Machine Model: PowerMac3,1
    CPU Type: PowerPC G4 (3.3)
    Number Of CPUs: 1
    CPU Speed: 1.35 GHz
    L2 Cache (per CPU): 256 KB
    L3 Cache (per CPU): 2 MB
    Memory: 1.12 GB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    Serial Number: SG013CYSHSE
    Do you know how I find out what kind of graphics card that I have?
    thanks again,
    cy

  • Final Cut Pro Trial Version

    Where can you find a trial version of Final Cut Pro?

    You can't, sorry.
    But you can try Final Cut Express for much less. DV and HDV only, and 1/3 the price.
    Shane

  • How can I install Final Cut Pro 10.0.5 in other Mac?

    Hi,
    I have the Final Cut Pro 10.0.5 in a Mac, and I would like to install it in another one. But I can´t find the way to do it.
    Thank for your answers

    JJust copy it from one machine to the other on a drive. Don't forget to download the additional content.

  • Can't share final cut pro latest version across my macs.

    I have purchased, for quite a bit of money, the latest Final Cut Pro for my macbook pro - 10.5.6, I think it is , -  I really find all these decimal numbers meaningless, confusing and difficult to remember.
    Still, I want to share the purchased fcp app so I can use it also on my macbook air.
    Trouble is, my macbook pro runs on snowleopard, and the macbook air, which I bought more recently runs on  mountain lion,.. no, just  Lion....
    This latest version of FCP is not supported by Lion (10.7.4), so my macbook air can't download it.
    The solution to this  problem may seem obvious to many, but I can't see it. And the problem is just nuts!
    Any clues as to how to get my  - later version - macbook air to work with the latest version of Final Cut Pro would be much appreciated. Taa

    Lousy Fool
    Sigh, the wink at the bottom really doesn't help you to get away with the patronism in your answer you know.
    I know what OSX systems each of my macs run - 10.6.8 for the mcp and 10.7.4 for the mbair. 
    I don't want to "stress software update in the same apple menu" and move from 10.7.4 to 10.7.5, because its my understanding from researching reviews on this forum, and from my own experience that updating the operating systems on macs can cause hassle. If I am wrong in this then thats my learning.
    Finally, with regards to my expectations, it was a trainer at an applestore , fully aware that I was using these two operating systems, who suggested I upgrade my final cut pro. My expectations were that he knew what fcps compatibilities were.
    Finally, what kind of company releases an upgrage system is compatible with an earlier version of its own software (10.6.8), but not with a later one (10.7.4). I do have expectations of apple being better than this.
    This is only the second time I've come onto an apple forum to ask a genuine question that foxes me, and the second time I've received the kind of reply that its intended to put one down. Be aware of how your answers come across please.

  • HT4722 how many computers can i install final cut pro on

    I need Final Cut Pro X for work at my church.  If I buy on the app store, can I load on all three computers at the church, or do I have to buy a seperate copy for each computer?

    Unless you own and control the machines, you need to buy separate copies.

  • Can't install Final Cut Pro

    I bought Final Cut Studio 2 Academic today.
    When I installed the studio, the check box for Final Cut Pro from selection of softwares to be installed was grayed out (I could not check it.)
    I installed all other softwares from this suites successfully but not FCP.
    Why is this happening? Please help me. Thanks.

    Do you already have Logic installed on your system? http://support.apple.com/kb/TS1110
    -DH

  • Can't install Final Cut Pro 5 on a New Macbook pro

    My macbook has a 2.8ghz processor and meets all of the required hardware and software but it says that it does not and will not install. I am new to Mac and do not know how to fix this or who to contact.

    Hi -
    I believe Final Cut 5 is designed to run on a Power PC CPU machine, the current MacBooks use Intel chips - so the software will not install on your Intel based MacBook.
    You can, however, upgrade from a full version of Final Cut 5 to Final Cut Studio 3 which contains the latest version of FCP, version 7 as well as Compressor, Color, Soundtrack Pro and Motion for $299 which is a steal as the full version for Final Cut Studio 3 is $999.
    You only need the serial number of the full version (non-academic or non-upgrade version) to do the FCS 3 upgrade - you don't need to have FCP 5 loaded on your machine to make the upgrade work.
    Hope this helps.
    MtD

  • HT202389 Final Cut Pro Trial version to full version

    Can you import from trial version to the full version which is downloaded on a different computer? F

    Don't worry you won't lose your work unless you do something like delete the library.
    To work efficiently, all your media and projects should be on an independent HD but I assume yours is the the Movies folder on your laptop.
    If you have enabled sharing between both computers, you can simply connect them together and drag the Library in question from one device to the other using finder.
    Far better to put the library onto an external HD - and back it up onto another drive for safe keeping. Drives fail occasionally, with catastrophic results for video projects.
    Andy

  • How many computers can I install final cut pro on

    I have a mac book pro and a plastic mac book from 2010. I am thinking of getting a mac mini and/or a mac book pro with retina display. Will I be able to install it on all 3 computers? I read somewhere that I can install it on 10 devices. Is this true?

    Yes, as long as you own or control them. How many, is something that has been discussed a lot on many discussion boards, depending on how one reads the Apple legal docs.
    If you have more than 5 computers you're thinking of using FCPX on, give Apple a call and have them give you the definitive answer.
    Russ

  • Can't Install: Final Cut Pro GREYED OUT... and no ProMediaIO.pkg file. ??

    Yes, I already have Logic Installed. And, yes, I've read ALL the other posts I can find... but I don't HAVE a ProMediaIO.pkg file ANY WHERE in my system. And I KNOW how to find these things
    This is maddening, and absolutely embarrassing that Apple hasn't provided a fix for this. It seems that a TON of people are having this exact same issue, but nothing I can find to solve this.
    And NO, using Pacifist to hack into the file doesn't count... although I guess I'll do it if I have to :P
    Any hints? Help?
    tx,
    e

    What Tom said.
    Alternatively, you may control-click the application and choose "Open" - this should present a dialog warning but allow you to proceed.
    This should only be necessary each time you start a given application *for the first time*. In the future, a mere double-click or any other standard method of starting the application will work.

  • Can I install Final Cut Pro on a G4 Mirror Door?

    I want to know if it's possible to install FCP on a 2002/2003 G4 Mirror Door. Which version would work on this setup, and is the minimum processor requirements stated just a guideline -eg will it install and work, or just not run at all?Thanks in advance.

    http://www.apple.com/finalcutstudio/specs/
    If your system does not meet the reqiurements it will not install at all.

  • I can't install Acrobat X pro trial version.

    I have the rest of Adobe package and it only has problems with Acrobat.
    Here I attach what it says.

    Are you still able to click on the resumen de errores link?

  • HT3696 just wondering whether i can install final cut pro in my macbook air intel corei5

    just wondering whether can i install final cut pro in my macbook air wth intel corei5 64bit

    yes, you can. Its on mine.
    If however you plan on anything other THAN simple cuts and simple edits, youre barking up the wrong tree.
    Heavy layer and graphics additions or any serious vid. edits is not the forte' or platform for the macbook Air.
    see here for the details:
    http://www.fcp.co/final-cut-pro/news/1209-real-life-editing-experiences-with-a-m acbook-air-and-final-cut-pro-x

Maybe you are looking for