Can't install Final Cut Pro

I bought Final Cut Studio 2 Academic today.
When I installed the studio, the check box for Final Cut Pro from selection of softwares to be installed was grayed out (I could not check it.)
I installed all other softwares from this suites successfully but not FCP.
Why is this happening? Please help me. Thanks.

Do you already have Logic installed on your system? http://support.apple.com/kb/TS1110
-DH

Similar Messages

  • I CAN'T INSTALL FINAL CUT PRO 3 ON MY NEW INTEL IMAC, HELP!!!

    I'm trying to install FINAL CUT PRO 3 onto my new iMac but can't. It reads the disk but then says, "Original disk needed for install." I have the original disk, I own a registered copy of the program, so I'm stuck.

    Hi -
    I believe Final Cut 5 is designed to run on a Power PC CPU machine, the current MacBooks use Intel chips - so the software will not install on your Intel based MacBook.
    You can, however, upgrade from a full version of Final Cut 5 to Final Cut Studio 3 which contains the latest version of FCP, version 7 as well as Compressor, Color, Soundtrack Pro and Motion for $299 which is a steal as the full version for Final Cut Studio 3 is $999.
    You only need the serial number of the full version (non-academic or non-upgrade version) to do the FCS 3 upgrade - you don't need to have FCP 5 loaded on your machine to make the upgrade work.
    Hope this helps.
    MtD

  • Can't install final cut pro 5.0/erased my old final cut

    I just got final cut studio and the option for installing final cut pro is inaccessible. When it finished installing (said it was successful), my old version of final cut was gone and the new version was not installed.
    What do I do because when I go to reinstall it, it wont let me install it (says skip)?

    Hi Jerry,
    Thank you for your quick response. I called the hotline and it is closed until 6am tomorrow. Below are my specs:
    Hardware Overview:
    Machine Name: Power Mac G4 (AGP graphics)
    Machine Model: PowerMac3,1
    CPU Type: PowerPC G4 (3.3)
    Number Of CPUs: 1
    CPU Speed: 1.35 GHz
    L2 Cache (per CPU): 256 KB
    L3 Cache (per CPU): 2 MB
    Memory: 1.12 GB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    Serial Number: SG013CYSHSE
    Do you know how I find out what kind of graphics card that I have?
    thanks again,
    cy

  • How can I install Final Cut Pro 10.0.5 in other Mac?

    Hi,
    I have the Final Cut Pro 10.0.5 in a Mac, and I would like to install it in another one. But I can´t find the way to do it.
    Thank for your answers

    JJust copy it from one machine to the other on a drive. Don't forget to download the additional content.

  • HT4722 how many computers can i install final cut pro on

    I need Final Cut Pro X for work at my church.  If I buy on the app store, can I load on all three computers at the church, or do I have to buy a seperate copy for each computer?

    Unless you own and control the machines, you need to buy separate copies.

  • Can't install final cut pro trial version 10.0.6

    hello, i can't insatll the trial version of final cut pro 10.0.6
    after downloading and agreeing, there comes an information that the disk image is destroyed. i tried downloading it many times on different machines but the problems stays the same. please, help!

    I'm downloading the trial from apples website. you can't download the trial from the App Store. And I am sure it is not the connection problem. I can download other things at the same time and they work fine. I read somewhere that others had the same problem. It must be on Apple's side, but what is the problem - i can't find the answer.

  • Can't install Final Cut Pro 5 on a New Macbook pro

    My macbook has a 2.8ghz processor and meets all of the required hardware and software but it says that it does not and will not install. I am new to Mac and do not know how to fix this or who to contact.

    Hi -
    I believe Final Cut 5 is designed to run on a Power PC CPU machine, the current MacBooks use Intel chips - so the software will not install on your Intel based MacBook.
    You can, however, upgrade from a full version of Final Cut 5 to Final Cut Studio 3 which contains the latest version of FCP, version 7 as well as Compressor, Color, Soundtrack Pro and Motion for $299 which is a steal as the full version for Final Cut Studio 3 is $999.
    You only need the serial number of the full version (non-academic or non-upgrade version) to do the FCS 3 upgrade - you don't need to have FCP 5 loaded on your machine to make the upgrade work.
    Hope this helps.
    MtD

  • How many computers can I install final cut pro on

    I have a mac book pro and a plastic mac book from 2010. I am thinking of getting a mac mini and/or a mac book pro with retina display. Will I be able to install it on all 3 computers? I read somewhere that I can install it on 10 devices. Is this true?

    Yes, as long as you own or control them. How many, is something that has been discussed a lot on many discussion boards, depending on how one reads the Apple legal docs.
    If you have more than 5 computers you're thinking of using FCPX on, give Apple a call and have them give you the definitive answer.
    Russ

  • Can't Install: Final Cut Pro GREYED OUT... and no ProMediaIO.pkg file. ??

    Yes, I already have Logic Installed. And, yes, I've read ALL the other posts I can find... but I don't HAVE a ProMediaIO.pkg file ANY WHERE in my system. And I KNOW how to find these things
    This is maddening, and absolutely embarrassing that Apple hasn't provided a fix for this. It seems that a TON of people are having this exact same issue, but nothing I can find to solve this.
    And NO, using Pacifist to hack into the file doesn't count... although I guess I'll do it if I have to :P
    Any hints? Help?
    tx,
    e

    What Tom said.
    Alternatively, you may control-click the application and choose "Open" - this should present a dialog warning but allow you to proceed.
    This should only be necessary each time you start a given application *for the first time*. In the future, a mere double-click or any other standard method of starting the application will work.

  • Can I install Final Cut Pro on a G4 Mirror Door?

    I want to know if it's possible to install FCP on a 2002/2003 G4 Mirror Door. Which version would work on this setup, and is the minimum processor requirements stated just a guideline -eg will it install and work, or just not run at all?Thanks in advance.

    http://www.apple.com/finalcutstudio/specs/
    If your system does not meet the reqiurements it will not install at all.

  • HT3696 just wondering whether i can install final cut pro in my macbook air intel corei5

    just wondering whether can i install final cut pro in my macbook air wth intel corei5 64bit

    yes, you can. Its on mine.
    If however you plan on anything other THAN simple cuts and simple edits, youre barking up the wrong tree.
    Heavy layer and graphics additions or any serious vid. edits is not the forte' or platform for the macbook Air.
    see here for the details:
    http://www.fcp.co/final-cut-pro/news/1209-real-life-editing-experiences-with-a-m acbook-air-and-final-cut-pro-x

  • Can´t reinstall Final Cut pro on my Macbook without Firewire

    I can't install final cut pro in my new Macbook, should it be because of no firewire port.
    It says "hardware problem"

    Firewire port is not required to install Final Cut Pro. Take a look at the Final Cut Studio system requirements and cross-reference it with your system specifications to discover what hardware your computer is lacking.

  • Installing Final Cut Pro HD

    I can't install Final Cut Pro HD because apparently the installer is a power pc application no longer supported by the new mac. Has anyone figured out a way to work around this problem?

    Nope- that version is not compatible with Intel Macs like your iMac. You'd need to get FCP7 or FCP X.

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • I am trying to install Final cut pro studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported

    I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?

    You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher.  FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
    And then there's the issue of the OS.  OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
    Here's a brief history of full FCP versions and recommended OS compatibility:
    * = requires PPC             ** = works with both PPC and Intel                          *** = require Intel
    FCP 1.0*       OS 9
    FCP 2.0*       OS 9
    FCP 3.0*       OS 9, OS 10.1, OS 10.2
    FCP 4.0*       OS 10.2, 10.3
    FCP 4.5*       OS 10.3
    FCP 5.0*       OS 10.3 (OS 10.4?)
    FCP 5.1**     OS 10.4, 10.5
    FCP 6.0**     OS 10.4, 10.5, 10.6 (OS 10.7?)
    FCP 7.0***    OS 10.6, OS 10.7
    FCP-X***       OS 10.6, OS 10.7
    Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software.   You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
    Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
    -DH

Maybe you are looking for

  • Weblogic 10.3.2 Download

    Hello everyone, I have download Oracle Enterprise Manager Grid Control 11g Release 1 but during the installation i got error and the problem it's i have the wrong version of weblogic i have weblogic 10.3.5. So in the solution for my problem say that

  • Certifying and Locking file Invalidates Certification and Signatures in Acrobat 9.0.0

    I am running Adobe Acrobat Professional 9.0.0. After creating a PDF document from within Microsoft Word, and it opens in Adobe Acrobat Professional, I performed the following steps: Select Forms => Add or Edit Forms. Select the digital signature tool

  • Lightroom 1.0; request minimal importing and placeholders for incompatible files

    It's distressing to find out the Lightroom 1.0 still insists that PSD files be saved with maximize compatibility, at the expense of a huge increase in file size, simply to have it be shown among the files an imported folder. While I have no need for

  • Java not running in google chorme?

    I am using Mavericks OS X with Java 7. Java is not running in Google Chrome. Why? But running in other browsers e.g. Safari, Opera. Is there is any solution to fix this problem?

  • XI - XML libraries

    Hi all, which XML libraries (SAX and JDOM) does XI use ? My issue is to write an sender adapter module that does transformation (from flat file to XML) and to reuse XI libraries for XML message creation (I do not want to include outside libs, such as