Can't install flash. gp.xpi file downloads but doesn't install programme. adobe is added to safe sites. noscript disabled. 3rd party cookies enabled. what else can I do?
In plugins, what shows is: getPlusPlus for Adobe 16290.
In extensions there is: Adobe DLM 1.6.2.90
When try to download from FF plug ins, the 'allow' doesn't come up.
All I get is 'install missing plug ins'.
Shockwave does install.
Thank you so much! Only wish I had posted the question earlier ... would have saved a bundle of time!
But I still don't understand why the problem occurred. As always when updating Flash, I uninstalled the old version before downloading the new. Is this because of the new version of FF? Anyway, I will keep the link you gave me. Many thanks again!
Similar Messages
-
Flash player seems to download, but doesn't actually "work".
I have tried downloading flash player SEVERAL times to achieve the same result each time. I begin download process, halfway through, it tells me to close out internet explorer and i do. The download process continues to 100%. I click finish. I attempt to watch a video on Youtube, for example, just to have it tell me to download flash player again. It's been quite frustrating...
I have windows 7, internet explorer, 64 bit.
Thanks for hte help!Hello,
Welcome to Adobe Forums.
You can download Adobe Flash Player offline installer from this document :
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html
Thanks,
Vikram -
TMG NIS definition files download but update fails during installation
Hi Folks,
Runnning Forefront TMG build 7.0.9193.500
When attempting to update the NIS definition files, the files download but fail to install and the following message is logged in the TMG alert section:
"Definition Updating Failed
Description: An error occurred during an attempt to check for, download, or install definition updates on the server ServerName.
The failure is due to error: 0x80240022"
When looking in the windowsupdate.log file, it appears that there is a permissions problem encountered during the update process (WARNING: ExtractUpdateFiles failed with 0x80070005)
Here are the full contents of the C:\Windows\windowsupdate.log file logged during the update process:
===========
Logging initialized (build: 7.5.7601.17514, tz: -0700)
===========
= Process: C:\Program Files\Microsoft Forefront Threat Management Gateway\UpdateAgent.exe
= Module: C:\Windows\system32\wuapi.dll
-- START --
COMAPI: Search [ClientId = Forefront TMG]
<<-- SUBMITTED -- COMAPI: Search [ClientId = Forefront TMG]
** START **
Agent: Finding updates [CallerId = Forefront TMG]
* Online = Yes; Ignore download priority = No
* Criteria = "(IsInstalled = 0 and IsHidden = 0 and CategoryIDs contains 'ae4483f4-f3ce-4956-ae80-93c18d8886a6' and CategoryIDs contains 'e0789628-ce08-4437-be74-2495b842f43b')"
* ServiceID = {00000000-0000-0000-0000-000000000000} Third party service
* Search Scope = {Machine}
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
Microsoft signed: Yes
Checking for updated auth cab for service 7971f918-a847-4430-9279-4a52d1efe18d at http://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab
Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
Microsoft signed: Yes
+++++++++++
PT: Starting category scan +++++++++++
+ ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
Microsoft signed: Yes
+++++++++++
PT: Synchronizing server updates +++++++++++
+ ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
* Added update {A1395633-49F7-4A6C-AEE9-7166E952BCFD}.100 to search result
Update {E27A995F-A0EC-4A58-8FCA-B8E190D68D27}.100 is pruned out due to potential supersedence
* Added update {72ABF509-5624-4520-A70D-BD25033E2423}.100 to search result
* Found 2 updates and 4 categories in search; evaluated appl. rules of 28 out of 35 deployed entities
END ** Agent: Finding updates [CallerId = Forefront TMG]
>>--
RESUMED -- COMAPI: Search [ClientId = Forefront TMG]
- Updates found = 2
END -- COMAPI: Search [ClientId = Forefront TMG]
-- START --
COMAPI: Download [ClientId = Forefront TMG]
- Forced: No; Download priority: 3
- Updates in request: 2
- ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
<<-- SUBMITTED -- COMAPI: Download [ClientId = Forefront TMG]
** START **
DnldMgr: Downloading updates [CallerId = Forefront TMG]
* Call ID = {4328BC7B-E197-42E3-BFF2-96BCCAA86280}
* Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 1, Proxy session id = -1, ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}
* Updates to download = 2
Title = Definition Update for Microsoft Forefront Threat Management Gateway (Network Inspection System 4.32)
UpdateId = {A1395633-49F7-4A6C-AEE9-7166E952BCFD}.100
Bundles 1 updates:
{8614B1DC-943B-425B-B995-9F0FCD2E961D}.100
Title = Definition Update for Microsoft Forefront Threat Management Gateway (Network Inspection System 11.39.0.0)
UpdateId = {72ABF509-5624-4520-A70D-BD25033E2423}.100
Bundles 1 updates:
{8A1DD8C3-CF18-45BE-9F0D-68DBD4A53409}.100
DnldMgr: New download job [UpdateId = {8614B1DC-943B-425B-B995-9F0FCD2E961D}.100]
* All files for update were already downloaded and are valid.
DnldMgr: New download job [UpdateId = {8A1DD8C3-CF18-45BE-9F0D-68DBD4A53409}.100]
* All files for update were already downloaded and are valid.
END ** Agent: Downloading updates [CallerId = Forefront TMG]
>>--
RESUMED -- COMAPI: Download [ClientId = Forefront TMG]
- Download call complete (succeeded = 2, succeeded with errors = 0, failed = 0, unaccounted = 0)
END -- COMAPI: Download [ClientId = Forefront TMG]
-- START --
COMAPI: Install [ClientId = Forefront TMG]
- Allow source prompts: Yes; Forced: No; Force quiet: No
- Updates in request: 2
- ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
- Updates to install = 2
<<-- SUBMITTED -- COMAPI: Install [ClientId = Forefront TMG]
** START **
Agent: Installing updates [CallerId = Forefront TMG]
* Updates to install = 2
Title = Definition Update for Microsoft Forefront Threat Management Gateway (Network Inspection System 4.32)
UpdateId = {A1395633-49F7-4A6C-AEE9-7166E952BCFD}.100
Bundles 1 updates:
{8614B1DC-943B-425B-B995-9F0FCD2E961D}.100
Title = Definition Update for Microsoft Forefront Threat Management Gateway (Network Inspection System 11.39.0.0)
UpdateId = {72ABF509-5624-4520-A70D-BD25033E2423}.100
Bundles 1 updates:
{8A1DD8C3-CF18-45BE-9F0D-68DBD4A53409}.100
WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point
WARNING: LoadLibrary failed for srclient.dll with hr:8007007e
Preparing update for install, updateId = {8614B1DC-943B-425B-B995-9F0FCD2E961D}.100.
===========
Logging initialized (build: 7.5.7601.17514, tz: -0700)
===========
= Process: C:\Windows\system32\wuauclt.exe
= Module: C:\Windows\system32\wuaueng.dll
:: START ::
Handler: Command Line Install
: Updates to install = 1
: WARNING: Command line install completed. Return code = 0x8007000d, Result = Failed, Reboot required = false
: WARNING: Exit code = 0x8024200B
END :: Handler: Command Line Install
Preparing update for install, updateId = {8A1DD8C3-CF18-45BE-9F0D-68DBD4A53409}.100.
FATAL: Failed to copy file from C:\Windows\SoftwareDistribution\Download\57418eecd53e3e067a25056fe4892d0420c6ac8a to C:\Windows\SoftwareDistribution\Download\Install\mpips-fe.exe (hr = 80070005) after 10 retries
WARNING: ExtractUpdateFiles failed with 0x80070005.
FATAL: Failed to delete file \\?\C:\Windows\SoftwareDistribution\Download\Install\mpips-fe.exe (hr = 80070005) after 0 retries
REPORT EVENT: {F363E0CC-B0F5-4B28-8C27-631AC7CAD332}
2012-03-15 11:32:37:899-0700
1
REPORT EVENT: {336A98E0-0970-4297-B746-1A8A4B45F3CF}
2012-03-15 11:32:40:099-0700
1
END ** Agent: Installing updates [CallerId = Forefront TMG]
Triggering Offline detection (non-interactive)
## START ##
AU: Search for updates
<<## SUBMITTED ## AU: Search for updates [CallId = {9BB9AE78-F80D-4236-AD77-8E261ABB97E0}]
CWERReporter::HandleEvents - WER report upload completed with status 0x8
WER Report sent: 7.5.7601.17514 0x80070643 A1395633-49F7-4A6C-AEE9-7166E952BCFD Install 101 Unmanaged
CWERReporter finishing event handling. (00000000)
** START **
Agent: Finding updates [CallerId = AutomaticUpdates]
* Online = No; Ignore download priority = No
* Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
* ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
* Search Scope = {Machine}
>>--
RESUMED -- COMAPI: Install [ClientId = Forefront TMG]
- Install call complete (succeeded = 0, succeeded with errors = 0, failed = 2, unaccounted = 0)
- Reboot required = No
- WARNING: Exit code = 0x00000000; Call error code = 0x80240022
END -- COMAPI: Install [ClientId = Forefront TMG]
* Found 0 updates and 68 categories in search; evaluated appl. rules of 1058 out of 2009 deployed entities
END ** Agent: Finding updates [CallerId = AutomaticUpdates]
>>##
RESUMED ## AU: Search for updates [CallId = {9BB9AE78-F80D-4236-AD77-8E261ABB97E0}]
# 0 updates detected
END ## AU: Search for updates [CallId = {9BB9AE78-F80D-4236-AD77-8E261ABB97E0}]
No featured updates notifications to show
Successfully wrote event for AU health state:0
Successfully wrote event for AU health state:0
REPORT EVENT: {03FCFF25-6464-4C3E-A939-3E46A39BED6A}
2012-03-15 11:32:45:262-0700
1
CWERReporter::HandleEvents - WER report upload completed with status 0x8
WER Report sent: 7.5.7601.17514 0x80070005 72ABF509-5624-4520-A70D-BD25033E2423 Install 101 Unmanaged
CWERReporter finishing event handling. (00000000)
Since it seemed to help some folks that were having trouble downloading the NIS updates, I have also tried downloading the updates with (winhttp) Proxy authentication on and off.
I have also tried recreating the C:\Windows\SoftwareDistribution folder (Stop wuauserv; Rename folder; Start wuauserv; Folder recreated)
Still no luck. Any help or direction you can provide is much appreciated.
Cheers,
John
Hi,
Thank you for the post.
I did some research regarding error “0x80070005”, you may perform the following steps and see if it helps:
Step 1: Verify DCOM security
1. Click Start, click Run, type Dcomcnfg, and then click OK.
2. Expand Component Services, and then expand Computers.
3. Right-click My Computer, and then click Properties.
4. Click the COM Security tab.
5. Under Access Permissions, click Edit Default.
6. Verify that the following accounts are listed:
7. If any one of these accounts is missing in the Access Permission box, follow these steps:
a. Click Add, click Advanced, and then click Locations.
b. In the Locations box, click the Local_Computer_Name, and then click OK.
c. Click Find Now.
d. Press CTRL, click the required account names, and then click OK two times.
e. In the Group or User names box, click an account that you added, click Local Access in the Permissions for Account_Name box, and then click to select the check box in the Allow column.
f. Repeat step 7e for all the accounts that you just added, and then click OK.
Step 2: Verify DCOM default properties
1. Click the Default Properties tab.
2. Verify that the following configuration:
• The Enable Distributed COM on this computer check box is selected.
• In the Default Authentication level box, Connect is selected.
• In the Default Impersonation level box, Identify is selected.
3. Make any required changes, and then click OK.
4. Restart the computer.
http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/29d7f9d1-56cd-42f3-bd44-7de8448ef70e
http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/95edbee4-a75c-48ad-91d1-5316a96f9567
Regards,
Nick Gu - MSFT -
# Question
It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.
Also in the '''Properties''' window of Windows Explorer I '''no longer have the Details tab''', so I can't update my mp3 files with Artist, Album, Genre, etc. But the details tab does show up when I access it thru Windows Explorer.
I ran the AVG rescue disc an no viruses found. Now on '''FF3.6.15''' '''RealPlayer''' shows when I right click but then '''immediately disappears and an icon appears in the System Tray''', but as soon '''as I hover my mouse over it it disappears'''.
Does anyone have any ideas or suggestions?
How can I get this fixed? I have time-sensitive mp3s that I won't have access to anymore if I don't get this resolved in a hurry. (no pressure on you, I'm the one that's stressed about this) Can you help? Thanks so much for responding to this '''inquiry.''''''bold text'''See:
*https://support.mozilla.com/kb/Downloads+window
*Tools > Options > Privacy > Firefox will: "Use custom settings for history" > "Remember download history" -
I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?
See this previous discussion:
https://discussions.apple.com/message/16962474#16962474 -
I can download from iCloud to one iPod but not the other. It says downloaded but doesn't show up in music...
I'm not sure what you mean by the "music library" - are you looking in the Music app? Or the iTunes app (which is not the one to be looking in)?
-
PLUG INS check tells me that Shockwave Flash plugin is outdated. But when I check on Adobe website, I have the current version of this plugin (11.3.300.257)
I saw similar posts, but none recent.I'm having the same issue...
According to the Shockwave homepage, I have the lastest version installed. It's only when I visit the Firefox plug-in update page, that I'm told it's outdated. -
What line can I add to prefs.js (firefox v22) ensure that 3rd party cookies are allowed?
I'm running a program with selenium and it was working fine, then I updated to firefox version 22 and now its throwing my error saying 3rd party cookies need to be enabled. Is there a line of code I can add to prefs.js in order to ensure that 3rd party cookies are enabled?
Note that current Firefox releases have a new setting to accept third-party cookie from sites that you have visited before.
*Always : network.cookie.cookieBehavior = 0
*Never : network.cookie.cookieBehavior = 1
*Visited: network.cookie.cookieBehavior = 3
*Block all cookies: network.cookie.cookieBehavior = 2 -
I can not login to a certain account due to an error stating cookie not enabled, however my 3rd party cookies are enabled. How do I correct this?
COOKIE_DOMAIN=.hackers
I think this is the problem. .hackers is no valid cookie domain. You have to use something like:
.xy.ab
(two points)
I fear it is not possible to correct this easiely. First change the hostname to something allowed e.g. hackers.com
Then open an ldap browser and edit ou=iplanetamplatformservice,ou=services,dc=hackers
There is an entry with an xml. Copy the xml to an editor, search for .hackers, change it to a valid domainname.
Im not sure if a restart of the webserver is necessary here.
Another idea: You could also try to set the cookie domain to solnce.hackers, maybe this is accepted, even if it is not a cookie domain. But I dont know if this works...
hth
Chris -
I have rented a movie on iTunes and it won't download. I don't get an error message. It looks like it is downloading but doesn't progress
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
ID files downloaded but program does not install..What UP?I
I own legacy CS6 WEB design premium
Indesign files downloaded on my new computer but they did not install automatically like PS Flash DW and AI
the CC updater has no line for them to update.
However the CC installation on my old computer does update the ID that was installed with the suite in 2012Without proper system info and exact error messages we can't tell you anything. Update blockages can have all sorts of causes. The blindfire advise is to simply start over after running the cleaner tool, making sure to not botch it again by using a different order to update the individual apps...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
i install firefox in my new pc but in this pc when i try to download video from youtube the file downloaded is in 0 kb i try many application or addons but cant get success but the same application or addons work in my previous pc i have windows 7
the extension are Flash Video Downloader
MP4 downloader
and the 1 Click Youtube Downloader
and the other option showing in addons is VLC Player also all the applications and firefox are updated this is the information i have and beside this if you have any other information required please contact me on my given email idI use Video Downloadhelper with YouTube. It works well.
-
Force flash to open file download box in front of the flash movie
Folks,
I'm making a dvd title using flash to auto start when people
pops the dvd disc in.
I have a button 'Click here to download the movie' and
clicking the button should pop up a file download box so people can
save the movie file(.mov) to their desktop.
Problem is that the file download box shows up behind the
flash movie so people won't be able to see the download box since
it's hidden behind the flash. This is critical since I intend the
flash to open as a full-screen mode.
Is there a way to force the flash to open the download box in
front of the flash movie?
I tried getURL and fscommand ("exec", "filename.exe") and
even fileReference commands to try different way of linking the
movie file, and they all open download box behind the flash.
Please help~~~Please do not post the same topic in multiple forums. The
only thing I can suggest is when they click on the button to
download, you take flash out of full screen while they download the
video, you can use fileReference to control and monitor the
download. Use a listener object to monitor when download is
complete, then set flash back to full screen.
How are you scripting the full screen? -
Why won't my flash player work? downloads but does not install! internet explorer 9
I need the flash player to do my college statistics homework but it will not work!!!!! I was prompted by my textbook's website to update my flash player, so I followed the link as well as all the instructions on the adobe website. The flash player starts to download, then tells me to close internet explorer. i close explorer and retry. then, the adobe webpage comes up saying it's been installed, but when i try to go back and use my e-textbook, it says i need to update my flash player and i'm in the same place i started! help!
Windows 7 - 32-bit or 64-bit?
Make sure you use the 32-bit version of Internet Explorer when you try to use Flash Player, or checking the Shockwave Flash add-on.
What files do you have in C:\Windows\system32\Macromed\Flash (32-bit Windows), or C:\Windows\syswow64\Macromed\Flash (64-bit Windows) ? -
Can someone please help me. I am going nuts trying to fix this.
Thank you, thank you , thank you ...had the same issues as Mac users above and sure glad to find out it was not a Mac issue but rather a Go Figure You Would Think The Official Adobe Download Would Work But Doesn't ******* Work issue .... Thank you Adobe for a great product but you guys have a lot to learn about Mac users ... I came across a multitude of posts identical to this one all over the web with all kinds of solutions to do this that and the other and lo and behold one of your users Stenr41480953 came up with the simplest solution to simply download from a site that works...way to go Adobe, you should buy lots of share of mac because they might just take over your company one of these days !
Maybe you are looking for
-
I just got this thing for my birthday after having two 160GB classics stolen in a row and I'm beyond stoked to have my music back. It worked great for a few days and after putting some music on one day, I ejected (safely) it and then unplugged it. NO
-
Report Painter for GL balances
Dear Experts, I would like to create a report through report painter, which gives the GL balances Business Area wise under Profit centers. I'm using the 0FL New General Ledger Library. I'm able to get GL balances either Business area wise or Profit c
-
Old computer died need to make new computer main iTunes account
My main PC died and I now my laptop is my main computer. I need to make this computer the main computer for my iTunes account. How do you do this?
-
I have a G4-dual processor and now have another one available. Can I? if so, How can I connect the 2 G4 computers together to get the max processing output from the 2 G4-Dual? Both have latest Tiger OS. I remembering using the firewire connection. Th
-
Network Connection To Store Timed Out??? Advise Extremely Appreciated!
Hi everyone, I am/was thinking about buying an iPod Touch for myself and I thought I'd go ahead and get iTunes. I see everyone is having this problem, but I am in need of personal advise. Here are the diagnostics: Microsoft Windows XP Professional Se