Can't install german ver. of LabVIEW 6i

At the very beginning (after clicking "start installation") of the
installation of the german academic version of LabVIEW 6i on
Win2000(german), "Windows Installer" gives an error message like:
"Fehler bei der Anwendung von Transformen. Sind Sie sicher, dass die
angegebenen Transformpfade richtig sind?". My (bad) translation of
this message is: "Error by using (Transformen). Are you sure that the
defined (Transformen)-paths are allright?". The installation of the
english or an older german version (5.0) is no problem. Does anyone
know the problem? What can I do?
I would be very lucky to be able to use LabVIEW 6i in german!

Simon Linder wrote:
> At the very beginning (after clicking "start installation") of the
> installation of the german academic version of LabVIEW 6i on
> Win2000(german), "Windows Installer" gives an error message like:
> "Fehler bei der Anwendung von Transformen. Sind Sie sicher, dass die
> angegebenen Transformpfade richtig sind?". My (bad) translation of
> this message is: "Error by using (Transformen). Are you sure that the
> defined (Transformen)-paths are allright?". The installation of the
> english or an older german version (5.0) is no problem. Does anyone
> know the problem? What can I do?
> I would be very lucky to be able to use LabVIEW 6i in german!
Hi Simon,
why don't you just call the support in munich? They usually find out very
fast wh
ats wrong, by no cost.
The other thing is, for installing the regionized version of LabVIEW,
Nidaq has to be installed in the same language. Mustang ( at another
place in this tread) posted how to check this. So if you have a previous
NiDAQ istalled in another language, this might be the problem.
Good luck,
Rainer

Similar Messages

I can't install update Ver 3.6.13 because I do not have sufficient permission to access some items.

When I download Ver 3.6.13 the Downloading Update runs for several hours. On 12/15/10 I was successful. When I attempted to install, I was informed I did have not sufficient Permission to access some items”. But I was signed in as an Administrator. How can I get this update installed? Thanks Bob

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Can't install evaluation copy of LabView 8.0

The evaluation copy of Labview 8 will not install. It starts and then fails with the following error:
Error 1402: "Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\LVDB.Application\CLSID."
This register key exists on my machine and I can open it with "regedit". What's wrong?

I just searched ni.com for "1402" and the first link that came up was a KnowledgeBase entry describing this problem and how to fix it.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How can I install German Version of Photoshop?

Hello,
I have the retail disks of CS2 and want to install a German version of Photoshop on a US computer running Mac OS. Can this be done?
-Mark

If the CS2 serial number you have has never been used by anyone else, for instance to upgrade to CS3 or CS4, then Adobe Customer Service may be able to help you by issuing you a new number that will work for the German version, but I am pretty sure you will have to go through Adobe Customer Service. I wouldn't advise buying the new German version before you get this settled with Customer Service.
If the copy of CS2 you currently have has already been used by someone else to upgrade, then it will do you no good whatsoever. It's not eligible for an upgrade anymore.

Desperate! How can I install German Version of Photoshop?

Hello,
I have the retail disks of CS2 and want to install a German version of Photoshop on a US computer running XP or Vista. Can this be done?
I've tried to select Deutsche duing install but it still installs English version.
-Mark

All retail versions of PS come in a single language, with no option to change.
I went through this when I was working in Germany.
The language options are for the EULA and not for thr application itself.
You would have to buy the Deutsche Version. and CS2 is no longer available.
I don't know whether Adobe do cross language upgrades – you'd have to ask them.

Can't install DAQmx 8 with LabVIEW 8

I installed LabVIEW 8 on a test PC yesterday as well as a bunch of stuff from the device drivers CDs. I openeed LabVIEW today, and there was no DAQmx palette I manually started the Device Drivers CD installer to try to install DAQmx 8, and it won't let me select it - apparently "This feature is incompatible with products already installed on this computer" - see screenshot here: http://forums.lavag.org/index.php?showtopic=2864
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Forget it - an uninstall and reinstall of DAQmx seems to have solved it (for now...)
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

How can i load a VI from LABVIEW ver 6.0.1b3 to LABVIEW ver 6.1

How can i load a VI from LABVIEW ver 6.0.1b3 to LABVIEW ver 6.1......I want to load a vi but i'm getting this error:
LabVIEW load error code 9:VI version (6.1) is newer than LabVIEW version (6.0.1b3)
My LabVIEW ver is 6.1
Please help ......it's important
Thanks

I am having similar issues with a *.exe from LV6.1. I have the runtime engine for 6.1 and recently upgraded to 8.2 from 7.1. I've never had 6.1 on my machine. I am able to install this executible and runtime engine on a machine with 7.1 and can run the *.exe fine.
I get a load error and am not sure why. I have had similar issues with old VI's that I have written in 7.1 executing on this machine w/ 8.2
any suggestions.
Attachments:
error.zip ‏14 KB

How many computers can I install labview on?

I have two automated tests that I would like to run at the same time on separate computers.
Increased productivity and the whole 9 yards.
Can I legally install Lab view on both computers and run them at the same time?
Or is it only 1 copy of Labveiw can be running at a given time?
How are the licenses set up? I am running Labview 8 on a basic liscense.

I think that LV 8.0 can be installed on 2 or 3 machines (one might be a home system) but if you are developing a test system you should consider building your system into a stand alone executable which should be able to run royalty free on many machines under the runtime engine. Building and distributing applications is not hard in LV. I would check the licence agreement that came with your version of labview to be safe.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

On how many computer can i install labview student edition?

I intend to purchase labview student edition in a near future, and i was wondering on how many computer may i install it. All for personnal use. I currently have 2 desktop, and one laptop. But I will soon get a surface 2 pro and my laptop start to be old so I will also replace it soon, and I was wondering if I could get the student version work on all those.

If you are a student, you can get a renewable 6 month license for free here. no need to purchase anything.
As for the number of computers you can install it, you need to read the Software Agreement. Look for section G(1). The software can be installed on up to three computers but can be used only on a single computer at any given time. If you get a new computer, just deactivate on the computer to be retired and activate on the new computer.
LabVIEW Champion . Do more with less code and in less time .

Can more than 1 ver of FF be installed at the same? If so, How?

Can more than 1 ver of FF be installed at the same time? I currently have FF 3.x installed, and want to migrate to the newest FF, but before I do, I need to see which of my add-ons are no longer needed due to new intrinsic FF features, and if other add-ons are compatible. I simply need to have the features of certain add-ons, and if the new FF does not have the features I need, and the add-ons that give me those features are not compatible with the new version, then I simply can't upgrade. At some point I will write a detailed document stating features that I believe should be built into FF, but until then, perhaps a new Mozilla Migration Wizard program should be created. It would be able to scan a person's current installation, add-ons and all, and provide a report on which add-ons are compatible with the version the person wishes to upgrade to, and which are not, and check online to see if updates for the incompatible add-ons are available. The Mozilla Migration Wizard should also tell the user which add-ons are obsolete because their functions are built into the newer version of FF. But back to the question at hand: Can more than 1 ver of FF be installed at the same time? If so, is there a special procedure to follow? Will trying to install a second version corrupt my currently installed version? I hope a dual installation is possible because it will help me to transition to the newest FF as smoothly as possible, and it may also provide me with insight to suggest new features, procedures, functionality, utility type programs, and such.
Thank you for your time.
I hope to hear from you soon.
Gunther

See also:
*http://www.mozilla.com/firefox/features.html
*https://support.mozilla.com/kb/common-questions-after-updating-firefox

Can I install 8.5.1 modules on a LABVIEW 8.5 system

Can I install 8.5.1 modules especially ARM module on a LABVIEW 8.5 system ...
Since 8.5.1 is just a minor upgrade to 8.5 I guess it should do ..
But does it work effectively while importing code to ARM processor

Hi Bharath,
No, it's not a good ideal to install an 8.5.1 module on LabVIEW 8.5. It may function, but chances are that it won't. The versions should match exactly.
You will want to upgrade your LabVIEW to 8.5.1 before installed the LabVIEW Embedded Module for ARM Microcontrollers. (Of course, you are welcome to try, but I suspect that you will get an installation error.)
Kevin S.
Applications Engineer
National Instruments

I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

sjrozas wrote:
I'm only trying out the subscription. Thanks for being so concerned about my finances.
Sent from my mobile.
Your initial post indicated that you had a CC subscription. That seems to imply that you have subscribed. If you hadn't already purchased Lightroom 6 I would suggest that you wait until you decide about CC. You really don't need both because the Lightroom program is precisely the same except for Lightroom 6 without the creative cloud has no Lightroom mobile capabilities. But I was only trying to help.

Can we install labview and labcar in same PC?

HI,
Can we install labview in same PC where LabCar is installed?

Be more specific:
Do you mean this: http://www.kineticcity.com/labcar/
Or this: http://www.etas.com/en/products/applications_ecu_development-testing-labcar_component_overview.php
Or this: http://www.mathworks.com/products/connections/product_detail/product_35658.html
I prefer the first myself.
Two different applications. Like having Word and Photoshop installed.

How can I install labVIEW to another path?

Greetings,
I am trying to install labVIEW 8.2.1 for our R.H. Linux labs campus wide.
I am able to install the software onto a single machine.
And in the installation script it outputs:
NOTE: LabVIEW will install by default in /usr/local/natinst/LabVIEW-8.2,
or in the natinst/LabVIEW-8.2 subdirectory if you specify an alternate location.
But it doesn't say how to specify an alternate location.
I need to install labVIEW into:
/afs/bp.ncsu.edu/dist/labview821/
which is a network filesystem we have here. Most of our commercial apps are installed this way. Your app is the first
commercial app I've had to install that uses RPM instead of a tarball.
I can't install the RPMs on every machine on campus because we only have root access
to a small subset of these machines. In the past we've been able to install apps into
AFS space and have anyone on campus be able to access the application.
(By adding each apps bin/ in the network directory to the search $PATH)
So I want to put labview in
/afs/bp.ncsu.edu/dist/labview821/bin/labview
instead of
/usr/local/bin/labview
Will this be possible with labview? Or will labview only work if installed on a local hard disk drive?
Thanks,

Greetings,
We have a site license for the college of engineering.
I was never prompted for any licensing info for the Linux version. (Durring install or running the labview
app post install on my test machine) I know some of our employees set up a LabVIEW license server. I know its IP address...
(152.1.68.81)
How do we specify that the Linux installed software should use that? Is it done via an environmental variable? Or does only
the windows version of the software use the license server? The Linux version appeard to have no copy protection? I never was prompted for
serial numbers or anything...
I also tried using the
./INSTALL --no-rpm
command line option to install the app but it failed to give me a way to specify a new install location. In fact, it seemed
to still use rpm for its install.
I looked at the readme.html docs on the install CD and it refered to a pdf that you can only read
after installing the program. (To learn how to install the software you first have to install the software)
This document was called: "LabVIEW release notes."
ON page 8 of "LabVIEW release notes" it says:
LINUX:
Complete the following steps to install LabVIEW for Linux.
1. Log into the system as root.
2. Insert the LabVIEW 8.2 installation CD. Uswe mount /mnt/cdrom to
   mount the CD. On some systems, the CD mounts automatically.
3. To change the current directoty to the mounted CD, enter the
   following command:
   cd /mnt/cdrom
4. To run the installation script, enter the following command:
sh ./INSTALL
5. (Optional) Install LabVIEW add-ons. Refer to the Installing LabVIEW
   Add-Ons section of this document for more information.
6. (Optional) Install and configure National Instruments hardware. Refer
   to the INstalling and Configuring Hardware section of this document for
   more information.
7. Refer to the Where to go from here section of this document for more
   informationabout getting started with and using labVIEW.
The INSTALL script prompts you to enter the directory where you want to
install LabVIEW, which is typically /usr/local.
But the install scipt never prompts you like it says it would in the release notes.
Maybe it did that in version 8.2 and doesn't in 8.2.1? (And they just forgot to update
the documentation or its just wrong?)
If rpm is the only supported option for installing the Linux version and if it can't
be relocated than we can tell the departments paying for the site license that
they will have to run the program only on our 200 or so Linux lab machines. Not their
Linux machines hooked up to whatever instruments they plan to interface with this
software.
But before I tell them that I'd like to hear someone tell me that what I'm trying to do
is impossible. (Install LabVIEW on a network directory) I am having a hard time
finding any further installation documentation for the Linux version on the ni website.
And the documentation I've read from within the program in the form of the Release Notes
seems to have errors.
Many thanks for any ideas anyone has.

How can i install Adobe Acrobat 11 in german language

Hello,
a simple question.
how can i install Adobe Acrobat XI Prof. in german language?
I have the donwload option for german and this will download the AcrobatPro_11_Web_WWMUI.exe.
--> Acrobat Professional
11.0
German
Windows
Acrobat Professional 11.0 WIN ESD D
When i start the installation with this donwloaded file i have only Enlgish as an language option.

Hi Sukrit,
thanks, but that doesn't fixed my problem.
Now i have a language selection in the setup process. i select German, the setup/installation windows are in German.
after installation the application is in English.
i can't change the language in the preferences. there is only English. the option "Choose at application startup" will be ignored. also when i start the application as administrator
It is possible that our company license key is language specific?
i try a normal installation with key and one as trail version. the trial version is in German.
i see this language setup option only if i select trial version during the installation.
As information, the OS is Windows 7 Ent x64 English and the regional / location settings is Germany.
regards

Can't install german ver. of LabVIEW 6i

Similar Messages

Maybe you are looking for