Can't install hp deskjet 1510 printer. "Error: This device cannot start. (Code 10)

Hello,
Anyone please help. Thanks.

Hello, May i know if the error is displayed on the PC to which the printer is connected or is there a flashing lights on the printer ? However, untill then you may try the below steps...While the printer is ON, unplug the power cord from back of the printer.Wait for 60 seconds.Plug in the power cord to back of the printer.Now try making a COPY.

Similar Messages

U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
Picture link (hosted on photobucket.com)
I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
I tried to uninstall this and let windows update install it again => not worked, same problem.
I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

Driver install with PXI 8360 Error " This device cannot start - Code 10"

While trying to instal PXI-6541 in PXI-1036 chassi with PXI 8360 controller[express-8360 on laptop side] , getting the error message "This device cannot start [Code 10]" Laptop is Lenovo T60 with latest BIOS
Thanks
Manu
Solved!
Go to Solution.

Hello Manu,
I'm sorry to hear that you are having so many issues with getting your Expresscard 8360 working on your Lenovo. I recommend that we first look into Device Manager in more details. You mentioned that there were question marks (?) on certain devices. This usually means that there are devices on your PC that do not have any associated hardware drivers. For the Expresscard 8360, the drivers should be native to the Windows system, so I am unsure if those "?" do belong to this portion of the system. We can test this out by removing the expresscard 8360 and see if the "?" are still present. These "?" can be from the internals of the PC or modules that you've attached. If you've restored your operating system recently, it could be from the peripherals of your computer in which case you will need to find and install the chipset drivers. This can also be from the modules that you in your chassis, assuming that you haven't installed the necessary drivers for them, in which case you can find them on the Driver CD you have.
The exclamation mark (!) in Device Manager usually signifies a problem with getting the hardware started/operational. From your earlier posts I believe that the "!" is related to the Error Code 10 that you are receiving. Assuming that the correct power sequence was performed, chassis then PC, this is representative of a BIOS compatibility issue. Essentially this is occuring because the BIOS of the motherboard is not correctly allocating the necessary resources to all the devices as it is supposed to. Since you already have the latest BIOS, I would recommend that you try using the MXI Express Compatibility Software, here ni.com/beta. This is something that National Instruments created in order to correct for the incorrect resource allocation of the PC. It is not a beta program, it is only on the site so that we can manage it more easily. I have seen Lenovo T60 laptops work with this software installed.
Let me know if this helps
Thanks
Can W.
PXI and VXI Platform PSE
National Instruments

Intel 82579V network controller "This device cannot start" (code 10) error"

I've just finished installing a Z77A-GD55 motherboard and had a problem where the Intel 82579V network controller wouldn't start after a cold boot. Device manager would show “This device cannot start" (code 10) error”.
After a reboot it would work every time. During the time it didn't work the adapter was incorrectly shown in device manager as 82579LM. There's an older thread about this issue but the fix described there were of no help with my problem.
After a lot of searching I found Intel has provided a fix for people having this issue after sleep mode so I gave it a try and it seems to work for my issue too, so far anyway.
So if anyone else is having this problem with the same Intel network controller I suggest giving this try.
Go to the Intel Download Center and search for 82579V. Select the first result entitled "NVM Update Utility for Intel® 82579V Gigabit Ethernet PHY Network Connection" and follow the instructions. Good Luck!

Thanks for the information.

Game Port Error: This device cannot start. (Code

I recently did a PC rebuild and have a fresh install of XP SP2. When trying to play with a gamepad that worked just fine before the reinstall of XP, it shows the game port as not working.
Sure enough, Device Manager shows a problem with the game port.
I uninstalled the game port and reinstalled it to no avail.
This is the error the properties of the game port has listed:
This device cannot start. (Code 0)
Anyone have any idea how to fix this - I saw several posts in this forum from some time ago with no answers.
Thanks in advance!

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

Can't install hp deskjet 1510 printer

Hello,
Can you please help me how to install my new printer. Error says ,," the hardware was not installed because the wizard cannot find the necessary software."

Hello, May i know if the error is displayed on the PC to which the printer is connected or is there a flashing lights on the printer ? However, untill then you may try the below steps...While the printer is ON, unplug the power cord from back of the printer.Wait for 60 seconds.Plug in the power cord to back of the printer.Now try making a COPY.

Beats audio driver error -This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE

i just did a windows 8.1 reinstall, and now suddenly my audio doesnt work? i torubleshoot the issue and it suggests uninstalling and re installing, but i dont know how to do that cant find the driver software someone help?

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

MTP usb device errors This device cannot start. (Code 10)

hello after update my pc companion , that software wont detect my phone on connectivity mtp mode but msc work well , pc companion working both connectivity before update . tq
Solved!
Go to Solution.

Have you looked here?
http://talk.sonymobile.com/t5/FAQ/USB-connection-problems/m-p/348074#U348074
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

"Device Cannot Start - Code 10" - Windows Vista Error, w/ 2nd Gen. Nano

I'm having trouble with my Nano and Windows Vista. The computer is recognizing the iPod just fine and seeing all of my songs, but nothing will play and the diamond bar does not move. I can't hear previews online either.
Under device manager, a yellow "!" shows up for the iPod, and it says "Device Cannot Start - Code 10" when I check. All of my drivers and updates are current as of today. So is iTunes. Any thoughts?
It worked before, but now it's not.

This is a reasonably common error on a PC when there is a problem with either a USB device, your USB cables or hardware, or the system drivers.
In a case where, as you say, the device works properly with other computers, the problem is more likely to be with the hardware or drivers on the computer you're trying to connect to.
See this site for some hints:
http://www.pchell.com/hardware/usbcode10.shtml
I found it via a web search; I don't have any connection to that site.
The good news is that your iPhone is probably fine.

Error during installation of AI16E4: device cannot start (code 10)

I'm setting up this pcmcia board on a windows xp. I've tried nidaq 7 and 6.93, but I seem to get the same error - code 10 any ideas?

AOMdesign,
At what point in the process are you getting error 10? During the driver install? While trying to detect the card in MAX? While trying to run a program that calls the driver?
If you get the error during the install and you are installing off a CD, I suggest copying the CD's contents to the hard drive and installing from there. That usually takes care of installer errors. Also, be sure that the card is NOT in the computer while installing the software. If the card was in the computer while doing the driver install, uninstall the driver, shut down and remove the card, reboot and install the driver, then power down and reinsert the card, then power back up. These are two of the most common installation fixes.
If something else is causing the err
or or if those suggestions do not fix the issue, please post details of where the error is occuring and what you have already tried here so it can be discussed further.
RossC

ThinkPad X230 - Test Instrument: "This device cannot find free resources that it can use (Code12)"

I am use an ExpressCard (http://www.home.agilent.com/en/pd-2053520-pn-M9045B/pcie-expresscard-adapter) to connect Lenovo notebook with instrument chassis (http://www.home.agilent.com/en/pd-1886666-pn-M9018A/18-slot-pxie-chassis).
I found that Lenovo notebook failed to enumerate with the instruments with error "This device cannot find free resources that it can use (Code12)" in device manager.
This never happened in Lenovo model ThinkPad X220 and models before that.
Other affected model: ThinkPad T430, T540p which all failed to enumerate.
Note: All notebooks are upgraded to latest BIOS.

You are going to need to move that card to another slot. That is definitely your problem. I had mine in the PCI-E X8 slot which then knocked my video card down to x8 as well. So this definitely takes up resources. Also you can use something like EVEREST of Sisoft Sandra and those will tell you what else is sharing with that card. You could have a difficult network card that is fighting with it as well. You may think that its onboard and that of course it would not fight, but it does.

WDM Capture Driver: Device Cannot Start (Error 10)

I have GeForce3 Ti200 with S-Video In, Out and TV out. I'm trying to run Virtual Dub to view my PS2, which is going into the S-Video In. It said I needed capture drivers, so I went to http://www.nvidia.com, got the ones that come with the Personal Cinema thing and installed them. Those didn't work. Came here and tried the drivers here, those didn't work. Tried other drivers and those didn't work. They all said "Device cannot start (Code 10)"
I've tried 1.1.6, 1.1.7 and 1.1.9. Any ideas? I've searched on google and seen some stuff about turning off ACPI but I use ACPI, so I'm not willing to do that.

God I love forums, cause 99.9% of the time someone else has encountered the same problem and then hopefully someone else who found a fix, posts that fix.
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=5847&boardid=9&sid=db40f75790c98440731e8c20eea03e5b
Much thanks to Nixus, and everyone who had solutions, but I found a variation of Nixus' solution was what worked for me so that's what I'll recommend.
"I downloaded the bios files from http://tw.msi.com.tw/autobios/SVga/Bios/Ms8850/v111/ and then downloaded NVFLASH.EXE and booted in dos and flashed the card i had to force the flash though it had some conflict of data or something but i knew it was the right bios and i had made a backup of the current one plust the card has dual bios so i wasnt too worried and it all worked out fine.
Goodluck with gettin all your cards workin
Cheers
Nixus"
This is what I did anyway:
1) went to http://www.msi.com.tw and dragged the mouse over 'support' and then clicked on live updates 2. Installed this program.
2) went to http://tw.msi.com.tw/autobios/SVga/Bios/Ms8850/v111/
which Nixus brought up,
and clicked on the install button. Which installed some other software to make this button work, then installed the flashing program. Held my breathe while it updated the vga bios, normally I'd do this from a clean dos 5.0 boot disk I have, and voila, problem fixed.
Well, not quite. After installing updated vga bios, all nvidia drivers were zapped. Or at least not installed right.
3) Add/remove programs, uninstall nvidia wdm drivers and vga driver for the 1 billionth time. Reboot.
4) Install 30.82 whql certified ones, rebooted.
5) Install wdm 1.19 drivers, reboot
6) Go into system, and now instead of the exclamation point alongside the nvidia capture driver with that error, it just shows as working. Tried virtual dub, btw program rocks except for that 2 gig file limitation, and changed the source to composite and bingo, video in again.
So long story short, I updated my 8850 to the updated bios, uninstalled all old nvidia drivers, installed 30.82 and then wdm 1.19 and it worky again. Haven't tried it with det4 drivers yet, didn't feel like pressing my luck.
If you search in this vga forum using the word "capture" without the quotes, it seems this problem with the 8850 and others is QUITE common :(
Whatever...updated bios fixed it for me...fine...so long as it's fixed. Bad enough I gotta boot into 98se to use my old large, legal sized mustek scanner on account of no win2k/xp drivers, don't want to have to boot into 98crash_edition ( well technically all 95-me could be called that ) everytime I want to cap something.

HP Deskjet 1510 printer

Hi ,I bought a new HP Deskjet 1510 printer just 5 days ago ,the first time when i installed it everything worked perfect but today i am trying to print some documents (PDF or Microsoft word documents) but I cannot get it ,just i get a smal line of every sheet that i am trying to print ,could you help me please with this issue?
thanks.

Hi Edd01,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having some issues when attempting to print from your computer. I suggest that you attempt to run the HP Print and Scan Doctor.
If this does not resolve your issue, please feel free to write me back.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How do i install HP deskjet 3510 printer without the disk to my laptop

how do i install HP deskjet 3510 printer without the disk to my laptop

Hi,
You can download from the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...
Full Feature Software and Drivers is the one you definitely need first.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Can't install hp deskjet 1510 printer. "Error: This device cannot start. (Code 10)

Similar Messages

Maybe you are looking for