Can't install hp deskjet 1510 printer

Hello,
Can you please help me how to install my new printer. Error says ,," the hardware was not installed because the wizard cannot find the necessary software."

Hello, May i know if the error is displayed on the PC to which the printer is connected or is there a flashing lights on the printer ? However, untill then you may try the below steps...While the printer is ON, unplug the power cord from back of the printer.Wait for 60 seconds.Plug in the power cord to back of the printer.Now try making a COPY.

Similar Messages

Can't install hp deskjet 1510 printer. "Error: This device cannot start. (Code 10)

Hello,
Anyone please help. Thanks.

Hello, May i know if the error is displayed on the PC to which the printer is connected or is there a flashing lights on the printer ? However, untill then you may try the below steps...While the printer is ON, unplug the power cord from back of the printer.Wait for 60 seconds.Plug in the power cord to back of the printer.Now try making a COPY.

HP Deskjet 1510 printer

Hi ,I bought a new HP Deskjet 1510 printer just 5 days ago ,the first time when i installed it everything worked perfect but today i am trying to print some documents (PDF or Microsoft word documents) but I cannot get it ,just i get a smal line of every sheet that i am trying to print ,could you help me please with this issue?
thanks.

Hi Edd01,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having some issues when attempting to print from your computer. I suggest that you attempt to run the HP Print and Scan Doctor.
If this does not resolve your issue, please feel free to write me back.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How do i install HP deskjet 3510 printer without the disk to my laptop

how do i install HP deskjet 3510 printer without the disk to my laptop

Hi,
You can download from the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...
Full Feature Software and Drivers is the one you definitely need first.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't install the Epson L355 printer

Hi, I can't install the Epson L355 printer because I get this message: "Can't install the software because it is not currently available from the Software Update server". What can I do?
Thanks!

What if you try deleting the /Library/Printer/EPSON and the/Library/Caches/Epson/folders and then reinstalling the updates?

HT201465 I have installed software for a HP Deskjet 1510 printer but it will not print

I have OS X Yosemite 10.10.3 and I just purchased a HP Deskjet 1510 all-in-one printer. I have installed the software and my computer is picking up the printer but it will not print. I have restarted the computer and it still will not print.

Hello jamesettafromfl,
If you continue to have issues setting up your new printer in Yosemite, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Add or remove a printer
OS X Yosemite: Printing troubleshooting
Sincerely,
- Brenden

HP Deskjet 1510 - Printing Issue

Hi,
Sorry if I have entered this in the wrong place but I am new to the forum.
My father has purchased a new HP Deskjet 1510. He has a Toshiba Laptop running off Windows Vista 32-bit.
I have used the installation CD provided to install and also downloaded the latest HP Drivers from the website as prompted.
All appears to have installed correctly and I am able to print all types of documents except word documents. (PDF's, Screengrabs, HTML pages etc.) When I print a word document, the printer goes through the motions but prints a blank page in the end.
I am also able to copy & scan documents in both black & white and colour.
I have tried various troubleshooting applications (HP Print & Scan Doctor, Windows Print Fix etc.) and all say that the printer and settings are all in working order.
I have also removed and reinstalled the printer but the problem remains.
I have also installed the printer on my own laptop (Dell Inspirion running off Windows 8) but the printing from word issue remains.
I am at my wits end and would appreciate if someone could provide some assistance.
Cheers.
Mageegs

Hi Mageegs,
Welcome to the HP Forums!
I understand that you can print all types of documents except for word documents with your HP Deskjet 1510, and I am happy to help you with this issue!
Please take a look at this website. How to troubleshoot printing problems in Word.
Otherwise, please contact Microsoft Support, since everything else is printing okay.
Hope this helps you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can't get my deskjet 1050 printer to work as wireless

How do I to use my deskjet 1050 printer as wireless by connecting it to my router? Windows 8 64-bit. It keeps saying, I need to install the wireless connection procedure, but I can't find anything like that. My router is supposed to be able to turn any printer into a wireless.

Even though this printer isn't wireless, there is a way to to use it wirelessly!Here's what you need:Google Chrome on whatever computer you're trying to use the printer froma Google account so you can sign into chrome DO THESE FIRST STEPS ON THE COMPUTER THAT THE PRINTER IS ALREADY CONNECTED TO VIA USB CABLE okay so what you have to do is open up chrome and in the top right hand corner there is a little button looks like three stacked horizontal linesclick that and sign into google chrome (a gmail account works or create a new account)then what you have to do is click that same button and go to settingsscroll all the way down and click advanced settingsonce again, scroll all the way down until you get to Google Cloud Printclick manage and then click add printersit will go to another screen and you should be able to search/add the hp deskjet (this may take a little patience)once everything is connected, all that is left is to print go to the customize and control button (that 3 horizontal lines button in the top right hand corner in crhome) go to settings > advanced settings > cloud print > manage and click the hp deskjeton the left hand side click print and click upload file to printthen pick whatever fille you want to print and WAHLAA! its printing (as long as ur printer is powered on of course)this way you can print wirelessly without losing formatting like you would if you uploaded it to google docsnow you can print to this printer from any computer as long as you are signed in from chrome and the printer is on! MAGIC hope that helps(:

Trying to install HP Deskjet 2642 printer...not working

I have tried to download HP Deskjet 2642 printer multiple times, however at the end of the installation, it tells me that the installation failed because the (path, or list of folders) doesn't exist or I don't have access to it. How do I fix this?!
A similar situation happened when I downloaded a game from a website that I paid for. It wouldn't let me open it because I was denied access to (some file).
I have an XPS 18.

mllarwoo,
The only printer I could find with the information you provided is the HP Deskjet 400 C2462.
A trip to the
Windows Compatibility Center shows that it is in fact supported by Windows 8.1, which is good to know before continuing.
Based on the error message you’re getting, it’s possible that the files are saving to a folder in which you don’t have the appropriate permissions to access due to not being an administrator.
You should try downloading your file(s) directly to your desktop, or even the Downloads or Documents folders.
Once they are completely downloaded, right-click on the file and select ‘Run as administrator’.
If you get prompted for administrative credentials you most likely aren’t logged in as an administrator.
Without being logged in as an administrator or providing administrative credentials, you won’t be able to perform tasks such as installing new software.
Mike
Windows Outreach Team – IT Pro

How can I install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8

Is it possible to install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8?

Is it possible to install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8?

How to install HP Deskjet 990cxi printer on laptop...

I have spent two days trying to install my excellent HP Deskjet 990cxi on my new laptop running Win7 Home Premium on an AMD 64-bit processor. I want to do two things:
to set the printer up to run direct from a USB port on my laptop. Having done this, I then want
to set the printer up on BT Home Hub Type 2A, connected through the hub's USB, as a network computer.
So far under windows, this has proved a huge problem. It seems that the printer settings file is in 32-bit, but in the attempt to install the printer through the Windows "add printer" in Devices and Printers, and after a Windows update on the program to find Deskjet 990c, I run into a brick wall with the printer failing to install. I get the following message: "Printer driver was not installed. Access is denied ". Yet I am loading the printer drivers as Administrator.
By contrast, I also run Ubuntu 11.04 linux on this computer under Windows.
Ubuntu loaded the 990cxi drivers in an instant when it was connected via USB to the laptop; and more importantly,
Ubuntu set the printer us as a network printer running off the BT Home Hub type 2A and it worked perfectly. I even tested it by sending a graphics file from my garden to the printer indoors and the quality was perfect.
So the observation is this: If Ubuntu can load both printer settings on the same laptop, why is Windows 7 such a trial? Can HP or BT Customer Service do anything about this?

This might help:
I had huge problems with my HP Laserjet 5M on getting a Homehub 3.0 - I'd used a Sky router before and had similar problems at the start with that. The BT Homehub is a very poor piece of equipment and the BT support staff (in India) are absolutely useless, they try to help and got me to allow them to remotely go on my screen and control my computer - so I could see exactly what they were doing - the computer equivalent of a bogbrush to a blocked bog - not impressive and 2 days and over 2 hours on the phone got me nowhere.
Finally found the instructions - or similar I'd used some years ago on the Sky hub:
Instructions on how to set a LaserJet 5M for IP address use on a network. Other printers models may may be similar.
         This is necessary on Mac OSX 10.6+ due to the loss of Appletalk support which made it much easier to configure with Default.
         • Press Menu, repeatedly, the following messages appears on the control panel: HP MIO MENU
         • Press ITEM. - CFG NETWORK=NO* will appear.
         • Press the PLUS button once. - CFG NETWORK=YES* will appear.
         • Press SELECT .
         • Press ITEM repeatedly until CFG TCP/IP=NO* appears.
         • Press the PLUS button. CFG TCP/IP=YES* will appear.
         • Press SELECT.
         For DHCP based IP addressing:
         • Press ITEM until BOOTP=YES* appears.
         • When using BootP or DHCP, keep the setting BOOTP=YES*. If set to BOOTP=NO*, then press the PLUS to change it to BOOTP=YES.
         • Press SELECT to set, then GO.
         • The BootP or DHCP server will configure the TCP/IP parameters on the HP Jetdirect.
         • No other TCP/IP configuring is necessary.
         • Print a self-test page to verify the IP settings.
         • Press Menu until TEST MENU appears.
         • Press Item until PRINT SELF TEST is displayed.
         • Press SELECT .
         • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
         When set for BootP the lower right corner of the test page display something like:
         TCP/IP STATUS: READY
         HOST NAME: 192.168.2.10
         CONFIG BY RARP/BOOTP
         IP ADDRESS: 192.168.2.10
         SUBNET MASK: 255.255.255.0
         DEF. GATEWAY 192.168.2.1
         SYSLOG SERVER: NOT SPECIFIED
         IDLE TIMEOUT (SECONDS): 90
         SNMP GET CMTY NAME: ALL
         SNMP SET CMTY NAME: NONE
         BOOTP/DHCP SERVER: 0.0.0.0
         If you want to set the printer to a static IP address:
ALSO if you do NOT have a JetDirect follow the instructions below:
         • Press ITEM until BOOTP=YES* appears.
         • Press the PLUS button. BOOTP=NO will appear.
         • Press ITEM . IP BYTE 1=192 will appear.
         • Press the PLUS or MINUS button until the value of the first byte of the IP address appears on the control-panel display.
         • Press SELECT to set that byte.
         • Press ITEM to continue.
         • Repeat to configure the remaining bytes of the IP address you wan to set. e.g., IP BYTE 2=168 , IP BYTE 3=2, IP BYTE 1=10) = 192.168.2.10
         • Repeat Steps to configure the subnet mask bytes (SM BYTE 1=255, SM BYTE 2=255, SM BYTE 3=255 , SM BYTE 4=0) = 255.255.255.0
         • Repeat Steps to configure the syslog server IP address (LG BYTE 1=0,LG BYTE 2=0, LG BYTE 3=0, LG BYTE 4=0) = 0.0.0.0 (Mine had the BYTE 4=1 and only when I reset it to BYTE 4=0 did everything go correctly).
         • You can leave this at 0.0.0.0 if not needed.
         • Repeat Steps to configure the default gateway (GW BYTE 1=192, GW BYTE 2=168, GW BYTE 3=2, GW BYTE 4=1) = 192.168.2.1 (often it is automatically set by your router and you do not have to do anything other than check this is correct).
         • Configure the timeout (TIMEOUT=90). You can leave the default at 90 seconds.
         • Press GO .
         • Print a self-test page to verify the IP settings.
         • Press Menu until TEST MENU appears.
         • Press Item until PRINT SELF TEST is displayed.
         • Press SELECT .
         • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
         When set to a static value it looks something like:
         TCP/IP STATUS: READY
         CONFIG BY FRONT PANEL/TELNET
         IP ADDRESS: 192.168.2.10
         SUBNET MASK: 255.255.255.0
         DEF. GATEWAY 192.168.2.1
         SYSLOG SERVER: 0.0.0.0
         IDLE TIMEOUT (SECONDS): 90
         Add the printer.
         • To add the printer on Mac OSX 10.6+, open the Printer & Fax Preference panel.
         • Unlock if locked.
         • Press + to add.
         • Select HP JetDirect - Socket from the Protocol pulldown menu.
BUT if you do not have a JetDirect then click the Line Printer Daemon – LPD option instead.
         • In the address field, enter the IP address from the Test Page printout.
         • Print Using should set itself to LaserJet 5M from the built-in drivers in Mac OSX 10.6+ within a few seconds if it can communicate with the printer.
         • Type in a name you want to give the printer. It will use its IP Address as the name if nothing is entered.
         • Type in a location if you desire. Not sure where this shows up.
         • Press Add.
         • The Installable Options are determined and the printer is added.
NOTE – ref users without a JetDirect:
                  • If you get a message telling you the printer is busy – you have probably indicated JetDirect or Internet Printing Protocol - IPP option in the Protocol pulldown menu by mistake – delete the printer and go back and reset it with the Line Printer Daemon – LPD option instead.
Good luck.

Unable to install hp deskjet 3845 printer in windows 7

i was unble to install printer on my pc. i tried on windows update it says windows cannot found a driver for your device you can try in manufacturer site. and also i tried in add printer wizard it does not shows my printer model under hp series , what should i do now need help ! see in my screenshot there is no hp deskjet 3845 driver series.. please help me to install my printer. thank you.

Hi,Try following these steps to enable automatic updating and check for any difference:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4063&product=372330&sw_lang=#N815 If you experience any difficulties, follow the FAQ section and check for any change. Regards,Shlomi

Can't install the CreatePDF Desktop Printer in Win7 x64

I can't seem to get the CreatePDF Desktop Printer to install in Windows 7 x64. Is this a known issue?
I downloded the setup from 'Create PDF' button on my Acrobat.com account and used 'Run as administrator' to run the setup. IT seems to install fine (no errors) but the window to put in my user name and passwrod never appears (as it does in the How To video) and when the setup terminates, there is no Adobe printer in the Control Panel.
Dave

Hi.
Just follow the instructions for Windows 7 at
http://kb2.adobe.com/cps/869/cpsid_86984.html
It worked fine to me.
Hugs.

HP Deskjet 1510 prints last page first

When I print it is is printing the last page first. I do not have the collated pages tab checked. How can I reverse this ?

Hi Css1492,
I think this is a setting in the driver.
Follow these steps to check the print settings.
Click the Windows icon, click All Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer. The printer software opens.
NOTE:You can also open the HP printer software from your computer desktop: double-click the icon for your HP printer.
Click Print & Scan, and then click Set Preferences. The Printing Preferences dialog box opens.
Click the Advanced tab. The Advanced Options dialog box opens.
Layout Options: You should be able to select from "Front to Back" or "Back to Front"
Select "Front to Back" to have the first page print first.
Click OK, and then click OK again to apply the settings.
Let me know if this helps!
Jean
I am an HP Employee

How to install hp deskjet 920c printer?

I was trying to install this printer, but the macbook doesn't take the software

Is this what you're trying to install? This is the latest Mac driver for the 920C. Note that it was last updated in 2007 for OS X 10.5, and there may be no version of it that's compatible with OS X 10.6 or later. If that's the case, you may need to replace the 920C with a more modern printer.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=33996&prodTypeId=18972&prodSeriesId=28856&swLang=8&taskId=135&swEnvO ID=4019

Can't install hp deskjet 1510 printer

Similar Messages

Maybe you are looking for