Can't install HP printer driver 1.1.1, download from apple, on my MacBook Air. Any thoughts?
Any toughts on how to install the HP printer driver 1.1.1 on my MacBook Air
Where are you trying to download it from? Have you tried downloading and installing from this source: HP Printer Driver 1.1.1
OT
Similar Messages
-
Can't install a printer driver...
Before I throw my iMac across the fields I remembered this forum had helped before.. I can't install a printer on my iMac.. when I go through system prefs, add printer, it sees the printer and manages to make it to looking for installable options then that window just hangs.. I can use the computer.. but the window stays and it never actually installs the drivers, i'm using a wireless connection. The same thing happened before with a previous Epson printer connecting by USB. In the end I managed to connect it to my Macbook.. but that's a sticking plaster rather than a cure.....
Help...If you want to hook it up via wireless, it needs to support the wireless standard used by Apple, or be setup for printer sharing either in the wireless access point's own settings, or hooked up to another computer that has printer sharing turned on. It would help to know the model of the printer, and not just the make, to be able to give you a concise answer on which of these methods is most likely to be fruitful. And you are running Mac OS X 10.6 something on your machine, correct?
-
How can i install a printer driver?
after sucessful download - i can't choose the driver out of the downloads, when istalling my printer
It's a Canon Selphy CP400, for printing photos. I got the driver direct from the Canon homepage. when adding a printer i see and can choose it, just the downloaded driver file is grey and i can't choose it.
-
Can i install keynote on iPad mini after i have purchased it on my macbook air?
I purchased and install keynote on my macbook air. can i install keynote on my ipad mini without paying again?
No.
The MBA uses the OS X operating system.
The iPad uses the IOS operating system.
Programs that run on OS X do not run on IOS.
Programs (apps) that run on IOS do not run on OS X. -
Is it possible to connect my iPad directly to an AirPrint driver...without a pc?
Jeanette-
The B210a is on the list of AirPrint printers, so you should be able to make it work. There may be a firmware update needed. You can check for updates from the printer's control panel, assuming it has a WiFi connection to the internet.
If you do not have WiFi, or your WiFi doesn't correctly handle Bonjour data required by AirPrint, you should be able to setup the printer in Ad Hoc Network mode. You would then connect the iPad's WiFi directly to the printer.
IGMacKenzie's suggestion of Print n Share should work. Also try the free iPad App, HP iPrint Photo.
Fred -
I am trying to install an update for Java. The system won't allow it, saying I have specified "in Security" not to install any download not from the App Store. The only preferences pane I know of is the one on Safari, and it doesn't have anything about this. Am I looking in the wrong place? How can I get around it? I had the same trouble trying to install an Adobe Flash upgrade.
When I use your hot link "these instructions" I get a blank page.
Here is the message I get on trying to install a Java Script update:
This is frustrating in that
the update is not available on the App store.
it refers to security preferences I did not set and can't identify or locate--no such settings appear in Safari> security.
Can you be more specific? Thanks.
RWS
Like Show 0 Likes (0) Reply This solved my question This helped me Reply to Linc DavisThis is the message: -
Problem installing HP Printer driver hplip-3.10.9
I am trying to install the printer driver for my HP Laserjet p1102w (hplip-3.10.9.run). The program starts then stops with the error "TabError: inconsistent use of tabs and spaces in indentatiion". I did some research, but it could not resolve the issue. I think it has something to do with the way python handles tabs?? I did not have any problem installing this on my Fedora 13 desktop. Not sure how to proceed.
Thanks!I have used the suggestions given, and I still can't get the printer driver to load. I did check the /var/log/cups/error-Log and found th following:
D[08/Nov/2010:18:17:21 -0600] [Job 25] STATE: +connecting-to-device
D [08/Nov/2010:18:17:21 -0600] [Job 25] STATE: +hplip.plugin-error
D [08/Nov/2010:18:17:21 -0600] [Job 25] prnt/hpcups/HPCupsFilter.cpp 413: m_Job initialization failed with error = 48STATE: -connecting-to-device
The following was from a Fedora bug report. not sure if it is applicable to my problem
Tim Waugh 2010-04-23 11:17:41 EDT
Description of problem:
See in error_log from bug #520200 comment #7:
D [17/Apr/2010:12:34:43 +0530] [Job 29] prnt/hpcups/HPCupsFilter.cpp 413: m_Job
initialization failed with error = 48STATE: +connecting-to-device
There is a missing newline at the end of the string output from
HPCupsFilter.cpp:413.
In fact, looking around, there are *loads* of newlines missed from dbglog()
calls. This messes up STATE and ATTR reporting, as we can see above.
Version-Release number of selected component (if applicable):
hplip-3.10.2-4.fc11
D [08/Nov/2010:18:17:21 -0600] [Job 25] STATE: -media-empty-error,media-jam-error,hplip.plugin-error,cover-open-error,toner-empty-error,other
At this point not sure what to try next -
Where can i get a printer driver for my kodak hero 3.1 printer for my macbook
where can i get a printer driver for my kodak hero 3.1 printer for my macbook
Mac 101: Printing (OS X Lion)
Important:
Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper. Finally, use the instructions in this article to connect the printer to your Mac.
The procedures are identical for Mountain Lion. -
How to install HP printer driver *****
Hi,
How to install HP printer driver , so that i can see new device type in SPAD.
Thanks
LisaHi Lisa,
proceed as below.
1)Log in to HP-UX as root (or an other username that controls the printers, and has all the rights to the directories).
2)Type sam on the command line and press enter.
3)Scroll to Printer and Plotters with the vertical scrollbar.
4)Click twice on Printers and Plotters.
5)Double click on LP Spooler.
6)Click twice on Printers and Plotters.
7)Select Actions on the menu bar and click on Add Remote Printer/Plotter.
8)For Printer Name type any name, Remote System Name use the DNS/Host name, or alternatively use the dotted-IP (200.200.200.11). Remote Printer Name should be one of the destination ports on the Printnet (d1prn, d2prn, etc .). Also select Remote Printer is on a BSD System. Press OK and the server will install the printer.
9)Click on OK.
10)For a test print type lp d Printername /etc/protocols.
And finally dont forget to make this printer as the default printer if u have only this.
Right click on the printer and and say make default.
Regards,
Bapu -
I am using windows 7 and can't get the print drives to load for F2210 printer
I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.
Hello @Imvertical
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try.
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I don't have my disc to install hp6310 how can i install my printer without it
how can I install my printer without my disc
hp6310Hi,
On the link below, select 'Software and Driver Downloads', select your operating system and then download the Full Feature installer.
http://h10025.www1.hp.com/ewfrf/wc/product?product=1119598&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.
Hold down the option key and select
▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown? -
How do I install a printer driver, without the printer?
You see, I don't want to print anything.
I am using some CAD software and I use the “create PDF” function of the printer dialogue to make a PDF. The problem is my drawing is quite large so I need to install a printer driver for a printer that handles larger paper (Epson 1280). I have the driver, but it refuses to install without the printer being attached to it.I didn't post one.
-
Can I install a super drive dvd buner?
I have a G4 (466 MHZ) I would like to buy a digital movie camera and make DVDs on the computer from video I have taken. I do not have a dvd burner in the G4.
My question: Can I install a super drive or use an external dvd burner with the current computer?
Thank you.
G4 - 433mh Mac OS X (10.2.x)Fred's reply is 2007 , but a few years ago, I used my ol' reliable friend, my Cube/450 for creating DVDs.. it needed a looooong encoding time (usually over night), but it does work ...
but...
with 10.2, use old versions of iDVD (4 or 2...)
don't upgrade to QT 7...
be sure, the internal drive has allways 10, better 20GB free....
and, iDVD≤5 does not support external, firewire connected burners... so, if you're able to use a screwdriver, install any nice Pioneer at a free internal IDE connection; or, dare to use a 'hack', http://patchburn.de/ (english spoken), to teach iDVD4 to use external drives...
... that's all not state of the art, lege artis ... but... for less than 50$ you get a DVD-burning Mac..
... a slow burning Mac ... -
Where can I find a print driver for my e-mac running os9.2
Where can I find a print driver for my e-mac running os9.2
Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
You must supply the printer make and model for people here to help further.
Maybe you are looking for
-
i have the 1st iPad. Can it be updated to iOS 6.0.1? If not how to fix-when on the internet sometimes it will just stop and go to the apps screen.
-
Dear gurus While running the dunning through F150 It generate the dunning data but while prinout the dunning data in the form F150_DUNN_01 it shows the following message. I have checked the table T047E the details are avialble in the table. Dunning n
-
Digital signature on xml string
Hello I'm trying to sign an xml string, but when I do so, I receive: HIERARCHY_REQUEST_ERR: An attempt was made to insert a node where it is not permitted. at com.sun.org.apache.xerces.internal.dom.CoreDocumentImpl.insertBefore(Unknown Source)
-
Artwork does not appear on the grid or coverflow.
Artwork does not appear on the grid or coverflow for several albums but appears in the artwork viewer when you play a song from the album. How do I get the artwork to appear? The artwork seems to be missing for albums that I believe were on a playl
-
Advice on managing library with iTunes Match
Hi All I am running out of hard drive space on my mac for my music and need advice on how to manage my vast libary of music. I have itunes match + timecapsule but can't put trust in a cloud backup + don't know how have a media backup on my timecapsul