Can't install iMovie5 after installing iMovie6 and finding it doesn't work

Hello. I have Mac OS X 10.3.9 and it's a Power G4 computer.
Okay, I installed iMovie6 on it and now I can't hear the sound for my movie (which was originally edited on a previous version of iMovie--iMovie3 perhaps? not sure).
Anyway, my guess is that iMovie6 just isn't supported by my computer, that my computer doesn't have enough memory or power, so I want to replace it with iMovie5. But when I inserted the DVD, it let me install Garagband and iTunes but the option to install iMovie5 was disabled. I then tried dragging iMovie6 into the trash then installing iMovie5 afterward, but that didn't work either.
It's funny because my computer has all the specs for iMovie5 but not necessarily for iMovie6, yet 6 installed fine but now I can't replace it with 5.
Okay, any suggestions?

Hi
There are four places/buttons that can do this
• Main speaker volume setting in Finder/Desktop
• Main speaker volume setting in iMovie
• Each audio track can be muted by ticking the box far right of it
• IN iMovie Pref - You can set Play-back via Camera. IF YOU DO THIS
and disconnect or mute the Camera there will be silence.
Un chequing this or reconnect Camera and set up sound on this will restore audio.
Yours Bengt W

Similar Messages

  • I can´t turn off my ipod touch and the camera doesn´t work

    I can´t turn off my ipod touch and the camera doesn´t work..How can i turn it off if any button works?

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • I installed lion without software updating and now itunes doesn't work and my computer crashes when loading photobooth?

    I didn't bother to install the software updates my computer needed to do.  It said something about prepping for lion,  but I thought if I installed lion it wasn't neccesary.  Now seeing as I have all these bugs,  I feel like that was a mistake.  I also did not bother to make a time machine thing to go back on,  or any copy of my snow leopard hard drive.  Is my only option now to make a clean install of snow leopard with the cd and wipe everything,  then install lion again?
    I tried using command R on startup to reinstall lion,  but it says my disks are locked. 

    Hi, likely something else isn't updated, maaybe Safari?
    Is his he version you have, & Safari 5.0.3 or more?
    http://support.apple.com/kb/DL1575

  • I can't turn off full-screen, and pressing F11 doesn't work.

    I can't turn off full-screen mode, and hittng F11 doesn't work. Is there another way of turning it off?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts?

    Hello people,
    I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts?
    Thanks
    <Email Edited By Host>

    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
    1. Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    2. In the Finder, press command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
    Other...
    A sheet will drop down. In that sheet, select
    Raw Query
    as the criterion, then click OK or press return.
    Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
    4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
    Quit and relaunch the App Store. Test.
    If you find these instructions confusing, ask for an alternative method.

  • I just purchased Adobe Lightroom 5 and can't activate it after installing it on my computer because the product box doesn't contain a 24 digit S/N serial number but an 8 digit PN number. Does anyone have a solution?

    I just purchased Adobe Lightroom 5 and can't activate it after installing it on my computer because the product box doesn't contain a 24 digit S/N serial number but an 8 digit PNB number. I contacted the vendor and they told me to seek help via the Adobe help lines. Does anyone have a solution?

    Unfortunately, the "find your serial number quickly" link does not work because I don't have any number on my Lightroom cdrom box with 24 digits... All I have is an 8 digit PN number... :-/

  • Can't start Tomcat after installing Bea WorkShop for JSP

    Hi,
    I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.

    I installed BEA Workshop for JSP Version: 3.1.0
    Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
    Thanks for your assistance.
    Ron

  • Can't Start Portal After Install

    After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic/management/internal/
    Helper.preloadMBeanInfos()V from class weblogic/management/Admin
    at weblogic.management.Admin.initialize(Admin.java:210)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    I even tried "weblogic" for the system password and I get the same message.
    What password should I use to start the server?

    I've followed the directions and am experiencing the exact same problem. Brand
    new installation of Weblogic server 6.1 SP2 with examples. That install is working.
    Then added Portal 4.0 SP1, updated the license file and I have the same issue
    with the Illegal access exception resulting in the "Fatal initialization exception"....
    Hmm!
    [email protected] (Bowrat) wrote:
    Below listed are the common errors you run into during installation
    process:
    - You need to have the correct version numbers of both the weblogic
    server and the portal server. For instance the portal server 4.0 (eval
    copy) will only run on WebLogic 6.1 SP1. So check the edocs for
    supported platforms
    - Make sure you have the installed the full version of the weblogic
    server (including examples)
    - Finally, you need to run the UpdateLicense.cmd file to update the
    license.bea under ur Bea Root
    Give it a shot after u have checked all of the above three - goodluck
    - Bowrat
    www.Bowstreet.com
    Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
    From: Steve Anderson <[email protected]>
    Newsgroups: weblogic.support.install
    Subject: Can't Start Portal After Install
    References:
    NNTP-Posting-Host: 209.11.114.150
    X-Original-NNTP-Posting-Host: 209.11.114.150
    Message-ID: <[email protected]>
    Date: 13 Feb 2002 20:25:53 -0800
    X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
    Organization: BEA SYSTEMS Inc
    Lines: 18
    XPident: firewall-user
    Path: newsgroups.bea.com!209.11.114.150
    Xref: newsgroups.bea.com weblogic.support.install:9600
    After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
    that I entered during installation:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic/management/internal/
    Helper.preloadMBeanInfos()V from class weblogic/management/Admin
    at weblogic.management.Admin.initialize(Admin.java:210)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    I even tried "weblogic" for the system password and I get the samemessage.
    What password should I use to start the server?

  • After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!!

    After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!! What will I do?

    I have similar issues and was referred to a knowledge base article support.apple.com/kb/DL1572  This seems to corrected the issue.

  • Hi, I can't send email after installed maverick with mail

    hi, I can't send email after installed maverick with mail
    Thanks

    OS X Mail: Troubleshooting sending and receiving email messages

  • How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work

    How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work in CC.

    Your key cannot work in CC, it's newer version, and would require a new purchase.
    Downlaod CS5 here.
    Download CS5 products

  • My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work.

    My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work. I'm using a Windows Vista.

    Hi there,
    I've got a couple of articles that may help you out. This first one goes over how to properly remove and reinstall iTunes.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    This next one goes over some of the troubleshooting steps if you are having issues reinstalling iTunes.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Hope that helps,
    Griff W.

  • Why i can't see emoji after installing emoji keyboard? it appears as square after sendng on whatsapp, why i can't see emoji after installing emoji keyboard? it appears as square after sendng on whatsapp

    why i can't see emoji after installing emoji keyboard? it appears as square after sendng on whatsapp

    why i can't see emoji after installing emoji keyboard? it appears as square after sendng on whatsapp

  • Macbook pro mid 2006 (Intel Core Duo) how can I install new OS ? I cannot update the 10.6.8 and new software doesn't work anymore

    Macbook pro mid 2006 - how can I install new OS ? I cannot update the 10.6.8 version and new software doesn't work.

    A Core Duo Mac can't be upgraded past 10.6.8.
    (123371)

  • Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

    Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

    Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

Maybe you are looking for