Can't install. Installation "gets stuck". (Win 7)

Hi.
We bought Adobe Creative Cloud at my job. The installation went successful on my computer at work (OS X 10.8), but not at home (Win 7).
I downloaded Adobe Application Manager, and for some reason, Photoshop installs perfectly. Next up, After Effects stops at 26% installation, even though I let the computer on for one whole night. Illustrator stops at 34%, and some programs don't even start the installation progress, Premiere, InDesign and Flash for example. I don't get any error messages or anything, everything seems just fine, the installation progress bar just stops moving and the program never installs no matter how long I wait.
I also tried to download After Effects as a trial, but the Adobe Download Assistant froze. I uninstalled, and tried again. Same thing happened.
I've uninstalled all old Adobe programs, I've run the Creative Suite Cleaner Tool approx. 10 times with no sucess. I'm soon about to reinstall the entire operating system and hope that it helps, but it's a bit tedious, so I'd like to avoid it.
What more to try?
Update:
Problem solved. I uninstalled everything related to "Adobe", and searched my whole computer for anything with "Adobe" and deleted it, and I ran the Creative Suite Cleaner Tool, and also cleaned the registry. Then it worked!

No, it tried installing all Broadcom driver from folder ..\..\BootCamp5.0.5033\BootCamp\Drivers\Broadcom which are:
BroadcomCardReader64
BroadcomComController64
BroadcomEthernet64.
BroadcomNetworkAdapter64
Also none of the above inf files contains Hardware ID "VEN_14E4&DEV_43A0"
Looked most promising, but this driver also didn't contain the correct HW ID,
; x64 (AMD64, Intel EM64T) - Win7
[BROADCOM.NTamd64.6.1]
    %BCM430G_DeviceDesc% = BCM43XG_NT61, PCI\VEN_14E4&DEV_4320
    %BCM430G_DeviceDesc% = BCM43XG_NT61, PCI\VEN_14E4&DEV_4311&REV_01
    %BCM430M_DeviceDesc% = BCM43XM_NT61, PCI\VEN_14E4&DEV_4312&REV_01
    %BCM430G_DeviceDesc% = BCM43XG_NT61, PCI\VEN_14E4&DEV_4313&REV_01
    %BCM430N_DeviceDesc% = BCM43XNM_NT61, PCI\VEN_14E4&DEV_4328
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4329
    %BCM430N_DeviceDesc% = BCM43XNM_NT61, PCI\VEN_14E4&DEV_432b
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_432c
    %BCM430N_DeviceDesc% = BCM43XNM_NT61, PCI\VEN_14E4&DEV_4353
    %BCM430N_DeviceDesc% = BCM43XNM_NT61, PCI\VEN_14E4&DEV_4331

Similar Messages

Latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress

latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress.

Refer to EX11....
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

Problem installing itunes on windows 8 64bit. Installation gets stuck on Status: (blank) literally blank

Problem installing itunes on windows 8 64bit. Installation gets stuck on Status: (blank) literally blank. I really need to install this since I have only 1 PC and i just bought the new iPhone 6.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

When trying to install Epson R200 driver/utility combo, the installer gets stuck in an endless loop asking for admin password without installing. Any idea how to fix this problem?

When trying to install Epson R200 driver/utility combo, the installer gets stuck in an endless loop asking for admin password without installing. Any idea how to fix this problem?

Have you checked on the Epson support site? R200 support is located here.

EP6 sp9 installation get stuck on "deploy via sdm/j2ee"

Hi,
I'm trying to install the ep6 SP9 after I have installed the WAS SP9 and upgrade it to SP13
Now, The installation get stuck at "deploy via sdm/j2ee" stage.
This result is the same after several attempts including shutdown and restrat the processes
There are not any errors on the installaion logs and everything looks fine
Does anybody has any idea what it wrong ?
Thanks
Ami

Thanks Priya for your reply,
I did saw on the java log file the following error:
<b>
java.lang.NoClassDefFoundError: iaik/utils/Base64Exception</b>
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:108)
at com.sap.engine.core.configuration.impl.persistence.rdbms.
This is the only error message I'm getting.
The installation is being freeze for many hours and there is not any CPU load.
So I think that this message error causing the installation to freeze.
Does anyone familier with that error ?
Thanks a lot
Ami

Windows 8 installation gets stuck during create partition step in bootcamp. Any suggestions?

windows 8 installation gets stuck during create partition step in bootcamp. I tried to restart the bootcamp with same results. I have given it more than 6 hrs for last 3 times but I was able to go past this step previously where I got stuck during registering windows8.

Hi,
According to your description, it seems that your all Windows 8.1 computers connect to network via normal wireless network.
Did you have wireless router for them?
Please delete this adhoc, then check if these computer could connect to network.
If no, follow below guide to create and connect to adhoc :
Create adhoc in Windows 8.1
http://tipsandtricksforum.com/thread-210.html
connect to adhoc with Windows 8.1
http://social.technet.microsoft.com/Forums/windows/en-US/56ff83ff-1f15-4fc1-aa37-6651340d46fa/windows-81-connecting-to-ad-hoc-networks
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out!!!

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out ASAP

Hello nitinrathod29,
There are some possible fixes for this issue.
Please check the following thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/47bc6990-00f2-4d85-b3f8-9de03c637f43/visual-studio-2013-update-2rc-stucks-on-creating-system-restore?forum=vssetup
https://social.msdn.microsoft.com/Forums/vstudio/en-US/81478f51-37bb-4dbb-bd0c-beade1fd50ab/visual-studio-2012-professional-installation-getting-stuck-creating-a-system-restore-point?forum=vssetup
So here are them:
1. Check if you have any software which may prevent the installer from running. For example, Windows Defender or any other software which may restrict your permissions.
2. Just start the computer.
3. Run the setup as admin.
4. Check your UAC permissions.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Oracle 8i installation gets stuck at the end in net8 configuration

Hi,
I am trying to install oracle 8.1.6 on a windows 2000 (celeron) machine.The installation becomes non-respondant at the end after the 100% progressbar is shown and a configuration tools windows appear.
It has three tasks listed
Net8 Configuration assistant
Oracle Database configuration assistant
OMS NT service
It says that these configurations are optional but recommended.
But after exiting I can't connect to the database.
Continuously getting TNS Adapter error.
No Oracle service is found and oracle.exe doesn't run.
The details where it gets stuck is:
Done parsing command line arguments.
Net8 Configuration:Profile configuration complete.
Net8 Listener Startup:
Running Listener Control:
C:\Oracle\Ora81\bin\lsnrctl start LISTENER
Pls help.
I am trying to get oracle 8i working for two days with no luck :(

This is a duplicated thread > oracle 8i database initialization prob
You don't need to post twice, it becomes more difficult for us to track the same issue on different threads.
Please help us to help you.
~ Madrid

DS6.3 Installation - getting stuck at " Registering JESMF agent into Cacao

Hello,
Am trying to install DS 6.3 on the Solaris 10 Box. But its getting stuck in the end. I ran dsee_deploy install -v -c ALL /opt/SUNWdsee command. But when it didnt complete the installation. Please see below:
inflating: /opt/SUNWdsee/dscc6/dccapp/html/fr/help/proc-suffixes.html
inflating: /opt/SUNWdsee/dscc6/dccapp/html/fr/help/toc.xml
inflating: /opt/SUNWdsee/dsee6/data/sun-ldap-console-gui-help-l10n.lis
extracting: /opt/SUNWdsee/dsee6/data/sun-ldap-console-gui-help-l10n.del
Removing /opt/SUNWdsee//dsee6/data/sun-ldap-console-gui-help-l10n.del
Creating WAR file for Console
Configuring Cacao at /opt/SUNWdsee/dsee6/cacao_2
Setting Cacao parameter jdmk-home with default value [opt/SUNWdsee/dsee6/private]
Setting Cacao parameter java-home with default value [opt/SUNWdsee/jre]
Setting Cacao parameter nss-lib-home with default value [opt/SUNWdsee/dsee6/private/lib]
Setting Cacao parameter nss-tools-home with default value [opt/SUNWdsee/dsee6/bin]
Registering DSCC agent into cacao
Starting Cacao if necessary
Registering JESMF agent into Cacao
After this it didnt move up in the installation process. What could be the reason.. Any help on this would be greatly appreciated.
DS 5.2 P6 is running on this machine on a different path. But same installation got completed on another box successfully.
I dont see any log messages for DS6.3 installation under /var/sadm/install/logs directory.
Thanks in advance!.

Hi,
Looks like dsee_deploy hangs during JESmf registration. For this registration dsee_deploy launch the following command v"dsccsetup mfwk-reg -t".
You can try to run the command manually and check if it works or not.
Log of cacao ( <install_path>/dsee6/cacao_2/var/cacao/instances/default/logs/ ) can also help to see if JESmf module has been registered correctly or not.
Hope this helps
-Sylvain

HT1560 If diagnostics says appletv is working properly, why does the install keep getting stuck on pairing with the computer then back to select resolution over and over.

First gen Appletv suddenly stopped working from one night to the next. This has happened in the past once and the usual restore, reboot, etc, tinkering finally snapped it back into working quite unexpectadly. The symptom is, after restore when it gets to the screen to pair with itunes by entering the numbers in itunes, the number is briefly up on the tv screen and then quickly is gone returning to the select resolution page. This happens over and over with each try while the Appletv never shows up in itunes and the number box never appears either to pair the computer with the Appletv. It does the same thing with my intel macbook so I don't think it's the Imac. I have dumped itunes 10 and reloaded itunes 9 with no change in the problem. My IP scanner picks up that the Appletv is on our network as soon as it turns on. I have used wireless, which it finds and logs into, and ethernet which also has it finding my network. I can't test whether it is actually on the network by trying to play a trailer or something because it will not go past that pairing screen in the initial setup. Are the built in diagnostics reliable when they say your appletv is working correctly. The hard drive isn't making any exceptionally loud noise as it spins up. I am stuck with this unit because I use it with a G4 Imac running Tiger 10.4 for a video/audio jukebox at the bar. New ATV won't work with the Imac unless it's running leopard I believe. The thing runs like molasses already so attempting leopard which I don't have anyway would really make it crawl. I love a good mystery/problem but this thing is driving me crazy. If I just could know for sure what component inside was shot I would replace it. Could a hard drive boot up to a degree and then get stuck at one part of the install, or would it have to be the logic board, or something else. Bad juju in the house or something

Had same problem this finally stopped it for me.
FINDER
APPLICATIONS
UTILITIES
DISK UTILITY.app
select your main hardrive
REPAIR DISK PERMISSIONS
Message said repairing estimated time 1minute, yeah okay we all know how accurate those are process took about 5 minutes with nothing showing then all of a sudden printer permission repaired notations were flying onto screen in actions box. Do restart for heck of it sign on and so far no message has apeared where it did regularly. I hope this is indeed the fix. In meantime it never hurts to fix permissions so give it a try.
George in NY

Adobe Flash Player Installer gets stuck (Mac OS X Yosemite)

Every time i try to install Flash Player it gets stuck. Normally on around 29%, but it varies.
I've looked through countless forums / discussions and have tried uninstalling everything, re-installing - nothing seems to work.
Any suggestions?
Macbook Pro (Late 2013 model)

Use the offline installer http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

Adobe Flash Player Installer gets stuck "downloading" and won't proceed

I'm on Mac OSX 10.10.1, using Safari and Chrome as browsers. I recently upgraded to Yosemite and since then have gotten error messages that I don't have Flash installed. When I download the Installer, it gets stuck and won't move past "30%" downloaded. I've left it for hours, and it is still at 30 when I return. Is there a permissions issue that I could play with to allow it to continue installing? Any suggestions for what to try to get this installed?
I've been able to download the installer itself, but the problem comes after I double-click "Install Adobe Flash Player." See screenshot below.
This is where it gets stuck:

Use the offline installer http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

Photoshop CS3 crashing and installation getting 'stuck'

Last week Photoshop CS3 started crashing when trying to select a new file to open.
This didn't seem related to any particulr file and appeared to be random.
Error message was "an unrecoverable problem has occurred, Photoshop will now quit"
Actully it didn't quit and had to be force quit.
This was happenning sporadically, but today it happened every time I tried to open any image file.
Thinking it was a good idea to re-install, I tried that but the installation got 'stuck' and couldn't be completed.
A few minutes into the installation, prompts appeared asking for the CS4 Flash disk [which we bought seperately]
and then asked for the CS3 Application disk again. That disk was put in the drive and a minute or so later it asks for the CS3 Application disk.
Which is the disk it already has...
Has anyone else had this odd situation and found a solution?
Any thoughts appreciated!

Try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Install Tiger gets stuck at "Verifying volume", Disk Utility not working

Hi there,
I am trying to upgrade to Tiger from OS10.3.9. I have repaired the disk permissions. Each time I try to install Tiger, it gets stuck at "Verifying Disk Volume". I then booted up from the Tiger DVD and ran Disk Utility from the DVD. Now First Aid is continually trying to repair the disk, and what appears over and over again is:
Rechecking volume.
Checking HFS Plus volume
Checking Extents Overflow file.
Checking Catalog file.
Incorrect number of thread records
Checking multi-linked files.
Checking Catalog hierarchy.
Checking volume bitmap.
Checking Volume information.
Repairing Volume.
Rechecking volume.
Checking HFS Plus volume
Checking Extents Overflow file.
Checking Catalog file.
Incorrect number of thread records
Checking multi-linked files.
Checking Catalog hierarchy.
Checking volume bitmap.
Checking Volume information.
Repairing Volume.
etc...
i don't know what to do about this. I do have two hard drives installed on my computer. The one I am trying to install on is a 74.5 GB ST380021A. The other is a 38.3 Maxtor 6E040L0.
It would be great to know if anyone has advice on this. Thanks so much!
clara

Hi there,
I am trying to upgrade to Tiger from OS10.3.9. I have
repaired the disk permissions. Each time I try to
install Tiger, it gets stuck at "Verifying Disk
Volume". I then booted up from the Tiger DVD and ran
Disk Utility from the DVD. Now First Aid is
continually trying to repair the disk, and what
appears over and over again is:
Rechecking volume.
Checking HFS Plus volume
Checking Extents Overflow file.
Checking Catalog file.
Incorrect number of thread records
Checking multi-linked files.
Checking Catalog hierarchy.
Checking volume bitmap.
Checking Volume information.
Repairing Volume.
Rechecking volume.
Checking HFS Plus volume
Checking Extents Overflow file.
Checking Catalog file.
Incorrect number of thread records
Checking multi-linked files.
Checking Catalog hierarchy.
Checking volume bitmap.
Checking Volume information.
Repairing Volume.
etc...
i don't know what to do about this. I do have two
hard drives installed on my computer. The one I am
trying to install on is a 74.5 GB ST380021A. The
other is a 38.3 Maxtor 6E040L0.
It would be great to know if anyone has advice on
this. Thanks so much!
clara
hai clara,
the issue is coz the drive on which ur trying to install has some issues .
please goto the article http://docs.info.apple.com/article.html?artnum=13628
in most of the cases u would try some third party disk utility like disk warrior and noton disk utility to repair the disk .
then u need to run disk utility from the TIGER disk .
follow the article
http://docs.info.apple.com/article.html?artnum=106214
to repair the disc .
or else u can back up the data on ur HDD and then u need to do an erase and install of TIGER

Can't install PostScript Driver on Win 7

Hi,
I am trying to install Adobe Page Maker 7.0 upgrade CD on my Dell Laptop that has Windows 7.
Everything else installed except the PostScript Driver.
It starts to install then gets to - choose a printer.
I chose Generic Printer then it says chose an operating system and it gives me a choice of Win 95, Win 98 and Win NT.
I have Windows 7.
Thank you

No, can't do. It's hoplessly outdated and not compatible. If you really need PS output, look into GhostScript or other commercial products or use your normal printer driver's "to file" option. Otehrwise there's nothing to be missed.
Mylenium

Illustrator cs5.1 installation gets stuck at 81%

I have Windows 7 64bit and had to reset my system. After resetting, when I tried to install the complete Creative Suite 5.5, the installer got stuck.
yet I could install single programmes, like just Indesign or Photoshop.
However, Illustrator CS5.1 would not be installed. It got stuck at 81%.
In the protocoll, I found error messages of this type:
ERROR: DW049: Payload {EE85C227-0148-4825-B659-6A1E142571EE} has an action "repair" but no resultState
ERROR: DW049: Payload {FD58D99B-9927-4226-8E00-959A4F76BD89} has an action "remove" but no resultState
ERROR: DW049: Payload {FF5837B9-6F4D-1014-B2FA-C016F4A584FA} has an action "repair" but no resultState
What can I do? I really need the software..
Edit: I already used the Cleaner tool, but helped nothing...

This is a duplicated thread > oracle 8i database initialization prob
You don't need to post twice, it becomes more difficult for us to track the same issue on different threads.
Please help us to help you.
~ Madrid

Can't install. Installation "gets stuck". (Win 7)

Similar Messages

Maybe you are looking for