Can't install Intel Control Center (former MSM) in Windows Server 2008 R2

I'm running WS2008 R2 with SP1. Everything is great but I need to add monitoring of my RAID1 system volume. It's installed on onboard Intel chip. Latest driver installed succesfully but Intel Control Center asks for .NET 3. How do I install it? It's not
available in Windows Update.
Thank you.

Hi,
According to the following link, there is no version of Intel Desktop Control Center for Windows Server 2008 directly.
http://downloadcenter.intel.com/SearchResult.aspx?keyword=%22%22desktop+control+center%22%22
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding
this product's performance or reliability.
If you can confirm the required version of .NET Framework is installed properly, you need to contact the Intel support for further assistance.
Just for your reference, here is where to download the Microsoft .NET Framework 3.0 Redistributable Package:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=10cc340b-f857-4a14-83f5-25634c3bf043
Actually, .NET Framework 3.5 builds incrementally on the new features added in .NET Framework 3.0.
Thanks.
Nina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • How can I install and run lookout 6.1 on windows server 2008 64-bit without errors?

    How can I install and run lookout 6.1 on windows server 2008 64-bit without any errors?
    I was unable to start the lookout applcation after I install the lookout 6.1 on windows server 2008 64-bit.
    (error code: 0xC0000142). Please help!
    Thanks

    This will pobably do http://joule.ni.com/nidu/cds/view/p/id/1051/lang/en but the major issue is that you should concentrate and read the instructions carefully. My two cents.
    Dieet
    Afvallen

  • How to recognize if application is installed using "Install Application on Remote Desktop" option on Windows Server 2008 R2

    How to recognize if application is installed using "Install application on remote desktop..." option in Control Panel in Windows Server 2008 R2?
    Basically, as administrator, I can't say if the user installed application using "Install application on remote desktop..." in Control Panel or he just installed it by clicking the .msi executable. I can't find anything that makes any difference.
    I could not find anything in the registry. I am quite confused.
    Thanks,
    Aleksandar9

    Hi,
    Thank you for your posting in Windows Server Forum.
    Please make sure that you are using category view of control panel-programs to check the application. And in addition to “install application on Remote Desktop server” user can also use command line also.
    change user /install
    change user /execute
    change user /query
    “The first time you run the application, it searches the home directory for its .ini files. If the .ini files are not found in the home directory, but are found in the system directory, Terminal Services copies the .ini files to the home directory, ensuring
    that each user has a unique copy of the application .ini files. Each user should have a unique copy of the .ini files for an application. This prevents instances where different users might have incompatible application configurations.” (Quoted formthis
    article).
    Hope it helps!
    Thanks,
    Dharmesh

  • Can't able to Access the internet in my Windows server 2008

     I installed windows server 2008 server in my machine, it has only windows sever 2008 single OS.
           Now my problem is, i am not able to Access internet, I tried some intel softwares, to install Ethernet drivers, but no use.
    What i have to do now..? 
                                                       Please help in this issue,
                             Thanks in advance                              
                    surendra mannem
     

    Hi,
    Please confirm you have configured the correct TCP IP address, if you have the static IP address please confirm your default gateway and the DNS server address 
    is correct and work properly.
    More third party information:
    Windows 7 Static IP
    http://blog.mclaughlinsoftware.com/2009/11/26/windows-7-static-ip/
    How to Set Static IP Address in Windows 7
    http://www.youtube.com/watch?v=wmYBBHvfpTg
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • New bie: install java EE 5 tools bundle on windows server 2008 enterprise

    I installed jdk 1.6u7 in windows server 2008 enterprise with path set to c:\jdk\bin forder and JAVA_HOME=c\jdk
    I downloaded java ee 5 tools bundle (with netbeans and without JDK) and execute it but after extracting file, it warned:
    Java SE development kit was not found on this computer, Netbeans can not run without SDK blah blah...
    It's strange. In other my computer (winxp SP2) I installed it in same way without problem.
    Any hint please?
    Thanks in advanced.

    Your other PC had the JDK (JSE) already installed.
    You definitely need it. Yes, in my above thread I already said that I installed JDK 1.6u7 with path and JAVA_HOME variable configured properly.
    What I'm missing here?
    Please have me. I need your help
    Thanks in advanced

  • To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

    Dear Sir,
    Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
    2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
    Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
    Thanks

    Hi,
    1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
    2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
    3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself).  If you want you may configure these two settings via group policy setting instead.  The path of the
    group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
    4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
    5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
    -TP

  • Compatibility forms 6i and Windows Server 2008

    Hi,
    We want to change our Server from 2003 to Windows Server 2008 64bits.
    My question is : is there a compatibility between Oracle forms 6i (our application) and Windows Server 2008 ?
    Will the migration be successfull, or will we have some bugs?
    Thks for your help.
    O.

    YES. It worked perfectly for me, you'll have to use oracle 8/8i lite though.

  • How can I speed up logins using MacBooks to a Windows Server 2008 environment.  Logging onto the network is extremely slow.  We are using a wireless connection to the network in classrooms

    I work in an Education environment with Windows Server 2008.  I am trying to join our Macbooks to Active Directory.  They are joined but the login is extremely slow.  I read that this is because of a possible problem with an OS update.

    Check the ethernet link speed when connected directly to the TC.. if you are plugged into the modem direct.. and comparing that with wireless on the TC we have no way of knowing where the issue is.
    There is some issue related by someone when the TC was bridged.
    It is extremely hard to impossible to know what is causing wireless slow down.. needs lots more info.
    What is the link speed?
    Set manually and try different channels.
    The series 1 cannot do 2.4ghz and 5ghz simultaneously but test on 5ghz and see what the speed is like. You will need to be in the same room as the TC.

  • Can I install 11.5.9 on windows server 2008???

    Please let me know whether 11.5.9 is compatible with newly released Windows Server 2008. That is can I install or clone 11.5.9 on windows server 2008. Will it work fine? Is it supported by Oracle?
    Thanks & Regards,
    Abdul Jabbar

    Hi,
    Thanks for the reply. Now we have decided to migrate our existing 11.5.9 application from single-node to 2 Node(multi-node). Could you please let me know what services should reside on each node (Recommended by Oracle).
    And please let me know the steps I should follow to achieve the task as well.
    Thank & Regards,
    Abdullah

  • Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

    Hi, SDN experts.
    I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
    I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008  enterprise edition.
    I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
    When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
    =======
    The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
    Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
    You can check the current version of you operating system by runningu2026u2026..
    ========
    Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
    Thanks,
    KC

    Hi,
    I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.    
    I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
    "OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
    I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
    Do you know which kernel I should install?
    I browsed in:
    SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
    SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
    I downloaded:
    SAPEXEDB_291-20001361.SAR      Kernel Part II (for Basis 7.00)       291
    Is this the right Kernel patch I should use?
    If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
    Thanks,
    KC

  • Windows Server 2008 Standard Drivers for Intel I217LM Gigabit Network adapter

    Hi everybody,
    I am unable to find Network drivers for Intel® I217LM Gigabit Network adapter for Windows Server 2008 Standard (32-bit). I have found the drivers for Windows Server 2008 R2 but that being 64-bit do not work.Kindly help me in sorting out this problem as I
    am stuck need to install the drivers.
    Thanks in advance.
    SHOAIB

    Please post your question in Intel forums : https://communities.intel.com/community/tech/places
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Unable to install SAP B1 on Windows server 2008 R2

    Hi
    I am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
    Environment is set as following :
    1. SQL SERVER 2008 Installed on Server A
    2. SAP B1 to be installed on Server B
    3 Both servers are in domain
    4.Firewall is off
    5. ODBC Connection is tested Successfully
    6 Port is also seem to be ok.
    But  after Installing server tool, when trying to install the Server , in server type nothing is displayed.
    I also checked the connecting SQL server from the instance .
    Please help  is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
    Thanks & Regards
    RP

    Windows server 2008 R2 is not a supported OS for a lower 2007 version. You need to install a higher version.
    Hi Gordon ,
    It means I have to install SAP 2007 B PL10 afterwards upgrade it to the latest patch level .
    But searching in the forms , i have  seen some bopdy installed the SAP 2007 B PL15 on Windows server 2008 R2.
    Thanks in advance
    Regards
    RP

  • How to install external DNS Server on Windows server 2008?

    After 2 days hard working I'm confused about DNS servers.
    i registered a domain name and want to host my own DNS for my website.
    i install DNS Role and IIS on a windows server 2008 R2 and config them all and set 127.0.0.1 and 8.8.8.8 on my network interface on my serve .
    on my server i have 2 website
        dns1.mysite.com //to set it on my domain panel as name server
        mysite.com      //hosting
    now everything work on my server , when i type mysite.com at my web browser i can see my site.and when i ping mysite.com it reply my server static ip.
    but on internet it does not work. i mean if you type dns1.mysite.com or mysite.com not works and i got request time out when i ping theme.
    at this state if you set my server IP as DNS server at your network adapter(interface) everything work great.
    how can i have a DNS Server like that hosting using on our domains like dns1.godaddy.com ?
    i should register my DNS on any where like a organization or website or...?

    For the local nic you should _always_ configure dns servers that have the same scope. I think 8.8.8.8 and 127.0.0.1 will never have the same scope. Note that the configuration of multiple dns servers is only there for failover purposes. If the first one
    is working, the second one is never used.
    You should create a zone on your dns server matching your domain, and you should request your registrar to make your server authorative over your zone. Some providers let you configure this yourself (on a weninterface), so please consult the documentation
    provided by the service provider/registrar. If in doubt, they will be the primary contact point as the required configuration depends on theirs.
    Note that when you want to host a public dns server, the server should be reachable from the internet on port 53 tcp/udp and you should follow guidelines for serrver security very strictly. 
    Also be aware updates on dns servers need some time to be applied worldwide due to caching that has to expire and zone transfers that might be needed. be patient.
    MCP/MCSA/MCTS/MCITP
    Thanks SenneVL for your nice answer .
    my server IP is static and reachable from Internet,then why when you add my server ip on your network adapter as a DNS it works and you can type mysite.com on your browser and see my site?
    you said "Also be aware updates on dns servers need some time to be applied worldwide due to caching that has to expire and zone transfers that might be needed. be patient."
    how long it takes?

  • Unable to install illustrator on windows server 2008

    I keep getting error messages when trying to install the free trial of Illustrator with windows server 2008 platform. Is this not an approved OS?

    You can't use AI in a server environment. That would violate the EULA. Single user only.
    Not true. Local installs and usage do not in any way collide with the EULA even on a server OS. He said nothing about provisioning or setting it up for remote users.
    Mylenium

  • Installing IDS10g Or OC4J on windows server 2008

    Hello,
    I want to ask if i can install IDS10g or OC4J stand alone on windows server 2008 , if not what releases of IDS or OC4J can be installed on Win2008 server
    Regards,
    Tareq

    Pl confirm that you are installing using two separate ORACLE_BASE directories - one for 32-bit and the other for 64-bit.
    http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm#CJADGJDB
    Are there any clues in the install log ? http://download.oracle.com/docs/cd/E11882_01/install.112/e16774/ts.htm
    HTH
    Srini

Maybe you are looking for

  • How to insert a carriage return/line feed in a TextEdit without using wrap

    Hi, The string that I want to pass to the textedit is "Order Notes : bla bla bla Shipping notes : bla bla bla" The length of Order notes and shipping notes can vary. I am using wrapping. But I need to insert a line feed just before Shipping Notes so

  • Agreement not found for trading partners:FromTP HostParty, ToTP RemoteParty

    Hi, I have setup host partner and trading partner by importing CPA. I am trying to generate outbound message on Listening Channel(JMS_OUT_Queue). I am using custom Java Implementation relying on weblogic client jar to produce messages on this JMS_OUT

  • Loading *.txt files in web service

    I have a running web service on Axis, and can communicate with it from a j2se client and a browser test client. I'm attempting to load a txt file of data in the web service (stores a list of usernames). But the code can't locate the text file. Where

  • Decode does not work for line breaks

    Hi experts, In a BLS, I am decoding a string which I output .  It decodes the spaces but not for linea breaks.  What is wrong ¡? Thanks and best regards, Antonio Rodriguez  Rubalcaba

  • Error message when I run my anti-virus

    When I ran my anti-virus I got the following message "C:\Program Files\Toshiba\TOSAPINS\COMPS1\Intel Chipset Software Installation Utility (3264bit)0\MANUAL\B27611B.EXE";"The file is signed with a broken digital signature, issued by: TOSHIBA AMERICA