Can't install KB3036437 on two Windows 2003 servers

I am trying to install System Center Endpoind Protection 2012 Client 4.7.205.0 (KB3036437) and it will not install on two Windows 2003 Servers. It is giving me the following error:
Installation Failure: Windows failed to install the following update with error 0x80070643: Update for System Center Endpoint Protection 2012 Client - 4.7.205.0 (KB3036437).
I completely removed System Center Endpoint protection and reinstalled. When I first installed SCEP it was version 4.3.220.0. Soon after version 4.5.216.0 showed up through WSUS. I installed it and it installed fine with no problems. Even though it
did not prompt for a restart I did it anyway. After reboot version 4.7.205.0 showed up through WSUS. When I told it to install I got the error above.
Because of error 0x80070643 I have completely removed and reinstalled .Net framework version 2.0, 3.0, 3.5 and 4. I have also performed ran a FIXIT to fix software update registration corruption issues. Neither one of these worked either.
I have turned on MSI logging and the only error I see comes from the MPCMdRun.log and it says: ERROR: MpWscUnregister() Failed 8004100E
Anybody have any idea what to try next? Since the update won't install would this qualify for free support through Microsoft?

Hi,
To apply this update, you must have one of the following installed:
Cumulative Update 1 or later for System Center 2012 R2 Configuration Manager
(http://support.microsoft.com/kb/2938441/ )
Cumulative Update 5 or later for System Center 2012 Configuration Manager Service Pack 1
(http://support.microsoft.com/kb/2978017/ )
Service Pack 2 for System Center Configuration Manager 2007, Update Rollup 1 for
Forefront Endpoint Protection 2010,and update
2952678 for Forefront Endpoint Protection 2010.
For more information, please review the link below:
February 2015 anti-malware platform update for Endpoint Protection clients
http://support.microsoft.com/kb/3036437/en-us
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

2950 load balancing two Windows 2003 servers

We just purchased two Windows 2003 servers that connect directly to a 2950. They have setup network load balancing on the servers. With this setup both of the servers have the same MAC address cloned to their NICS. This is obviously causing a problem with the ARP table on the 2950. I opened a TAC case, and they said it was a Microsoft problem. The vendor that installed the servers says it the switch. Has anybody ever done this?
Thanks

Hello,
I think you would speak about "MAC address table" and not "ARP table" for your 2950 switch. It's typically a trouble known by Microsoft and describe here :
http://support.microsoft.com/default.aspx?scid=kb;en-us;193602
Regards
Yves

Installing mini sap on windows 2003 server..............

hi friends,i want to install mini sap on windows 2003 server, i have two cds for that but i m not getting how to install this,n also want to know,can it be installed on windows 2003 server or it can be installed on windows 2000 only.
please help me out
thanks

Hi,
Depending on which mini sap version you are trying to install. If you have 2 CD's, it means that it is an old version, for starting with 6.2 mini sap comes in 3 CD's (1 Kernel + 2 Database). As for the steps to install, just insert the kernel cd and an HTML file will pop up with the steps you need to do before, during and after the installation. As for installation issues please refer to:
http://www.sap-press.com/support.cfm?account=&product=H958
Regards,
Lachker

Cant install oracle 8i in windows 2003 server

hi,
I am a newbie in Oracle.While Im trying to install Oracle 8i in Windows 2003 server , setup is not running.It didn't show anything.When trying to run from auto run, after splash screen nothing came.I formatted hard disk,changed two more hard disks,.changed machine...but cant install it in no way... It is the same case in Windows XP home edition.
But it is running in one of my friend's machine(windows 2003 server)
Please help me with valuable solutions.
Thanks in advance

Did your friend install on W2003 or upgrade from an older version of the OS?
When trying to run programs on an OS that is not certified for the programs, it is hit-n-miss whether the OS actually has the support files needed for the programs.
Think about this: the Oracle environment needs OS support in the form of DLLs and other files. The contents of the DLLs are made visible as APIs. Each time Microsoft releases patches, it is possible that the APIs that Oracle used are changed. This is extremely true when a new version of the OS is released, and even more true with stripped versions such as XP Home.
If your friend installed and then applied patches, [s]he may have hit the proper API combination. If you appled patches first, you may have skootched your APIs to the point that Oracle can not longer install.
Even if you happen to get it installed, you run the risk of getting clobbered any time you install a new Microsoft patch. The risk is minimized when you use a certified combination of the OS and application.

Install Oracle VM on WIndows 2003 Sevser/XP/Vista

Has any one successfully installed Oracle VM on WIndows 2003 Server or XP or Vista?
Is it possible to migrate an exisitng Oracle Express Edition database to Oracle VM? Or the Oracle Express Edition has to be installed on Oracle VM on one platform before it is portable to another machine/server.
Is there any viewlet on how to use Oracle VM?

To answer your first question: Oracle VM Server can NOT be installed on Windows.
From the OVM-FAQ:
Does Oracle VM require a host operating system?
No. Oracle VM installs directly on server hardware and does not require a host operating system.
This applies to the VM Server. For the VM Manager:
The Oracle VM Manager works on the operating system Oracle Enterprise Linux 4 Update 5 or later.
FYI - these servers are all Linux-based.
You might check the documentation in the "Virtualization Technology Center": http://www.oracle.com/technology/tech/virtualization/index.html to find some more answers.
Message was edited by:
hbokho

Installing 9i R2 on windows 2003 server.

Hi Folks,
I am planning to install 9i R2 on Windows 2003 server, i want to know what 9i specific release i should install, whether i need to install some patch ? second if some one can point me to howto 9i R2 on windows 2003 server.
TIA,
Regards,

Thank Corrado & Sybrand for the value able input, in fact we are already using 9i at production environment, while the company who have developed our application have recommended us to use 9i R2 at DB Server, in our current 9i server we have windows 2000 server, our company have planned to move to windows 2003 server while upgrade to 9i R2, later when developers will ask us to move to 10g or even 11g we will upgrade, but now we are forced to stick with 9i R2.
please advice me keeping the situation in view.
Thanks again.

Can you install CC on two separate computers under the same A/C

Can you install CC on two separate computers under the same A/C

yes, adobe single user licenses allow up to two concurrent installation/activations.

I can't install itunes on my windows 7 (32 bit), I can't install itunes on my windows 7 (32 bit)

I can't install itunes on my windows 7 (32 bit)... it keeps saying R6034 error and 1114 error.
Help!
PS: I used to have an older version of itunes and it worked fine until I tried upgrading it, Now it's totally messed up!

Hello seppht,
I recommend following the steps in the article below when you are unable install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
You can also download the 64 bit version of iTunes here:
iTunes 11.0.4 for Windows 64
http://support.apple.com/kb/DL1615
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can't install C:\AS10gNT_Disk1 on windows-desperated--Help .

Can't install C:\AS10gNT_Disk1 on windows-desperated--Help .
hello forum it seems as if i have miss understood something about installing C:\AS10gNT_Disk1,2,3.
1: i have unziped all the 3 zip files in there respectivelly folders.
for examples.C:\AS10gNT_Disk1\Disk1.
i have oracle 9is db installed on my pc,
so in a previous maill somebody adviced me, plus the installation errors showed me that i could't installed it in C:\oracle\ora92 witch is where I have oracle9is db installed.
Then I was told that I could just give any new oracle_home and path.
but this is not working for me.
when I run oracle universal installation.
destination.Then
Enter or select an oracle home name and its full path.
as i have to enter a different name from my previous one where oracle9isdb is installed,
then I write
name oracleServer,
path c:\oracleServer when i do that i get the following errors.
There was a problem in accesing the staging area.
Pleased make sure the specified values for source and destiantion are valid

Hi,
actually I can only tell how it worked for me. I unzipped all zips into teh same directory and ended up with
d:\stage\disk1
d:\stage\disk2
d:\stage\disk3
Then I started the installer from disk 1 and follwoed all teh instructions. I did specify an Oracle Home as OracleAsInfra for the infrastructure to be in d:\OracleAsInfra and similar for teh Midtier OracleAsMidtier to be in d:\OracleAsMidtier
The rest ran smoothly
Frank

How can i install flash player for window 8.1(64 bit) on my laptop

how can i install flash player for window 8.1(64 bit) on my laptop?

For Internet Explorer, you don't. Microsoft has already done it.
For Firefox, Opera or Safari, use the Flash Player Plug-in (All other browsers)
For Chrome, you don't need to wither because Google puts it in the browser.

How to install oracle 9iASR2 on windows 2003 server

Hi,
I want to install oracle 9iasr2 on windows 2003 server. Pl guide.
Arvind

I want to install following component
Oracle 9i form server & report server
Oracle HTTP Server in SSL mode
Oracle As Web Cache
Regards
Arvind

I can't install Dreamweaver 8 on Windows 7

Just like my title, I can't install Dreamweaver 8 on Windows 7 Release Candidate.
I can start the installation, but it just stuck at "installing" for very long time，and the installation just can not Continue...
I already try to running it in XP compatibility mode( Windows XP SP2), and the answer is the same: can't install.
Can anyone advise, please?

I'm afraid you may be out of luck. DW 8 is 3 versions old and was not tested to work on the new operating system.
There have been reports that some people are unable to run CS4 or are having problems with CS4 on Windows 7, so I doubt very much that DW8 would work. Sorry.
See this thread for the same issue
http://forums.adobe.com/message/2167219#2167219

Not showing company list after installing B1 2007 on windows 2003 standard

Hi gurus,
I am facing a problem regarding B1.System not showing company list after installing B1 2007 on windows 2003 standard edition.
Plz help me.
Thanks in advance
Regds
Maddy

Hi Maddy,
Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
Vasu Natari.

How can I install and run a Windows program on my MacBook Pro/?

How can I install and run a Windows program on my MacBook Pro?

You have several options.
1, Use a Virtual Machine like Vmware, Parallels etc... to Create a Virtual Windows Installation and Run your program in there. A Virtual MAchine will runn in a Window on your Desktop and share your Mac's resources RAM HD space processor. Your MAc desktop will still be available while you run Windows install.
http://www.parallels.com/
2. Install Windows on a partition using Bootcamp. It will run a full installation of Windows you can boot into, and run your programs. The Mac desktop will not available until your reboot the computer and start in OSx instead of Windows.
https://www.apple.com/support/bootcamp/
3. Use Wine / Winebottler to run the Application without the need for a complete Windows installation.
http://winebottler.kronenberg.org/

Can I install Oracle 10g on Windows XP Pro

Hi All,
Can I install Oracle 10g on windows XP pro?
Regards
Prabir

Yes, you can but the software should be for Microsoft windows or you can download from the following link
http://otn.oracle.com/software/products/database/oracle10g/index.html

Can't install KB3036437 on two Windows 2003 servers

Similar Messages

Maybe you are looking for