Can't install Lion Server. Any log anywhere ?

Hi all,
I've been trying to install Lion Server for hours. I tried upgrading or starting from a blank partition, and get the same behavior : after the usual reboot, the installer starts but never progresses.
My set-up is a bit specific : MacPro 3,1, with a 10.6.8 Server on a 2xSSD RAID-0 volume (hooked to the 2 spare SATA ports on the motherboard), and Users on another regular disk.
I thought the RAID could be an issue, so also tried on a clone on a regular disk, it did not work.
I finally tried on a blank partition, on one of my regular disks, did not work as well...
I then tried all this from the ESD image restored to another partition... no difference.
I have the impression to have tried all combinations with exactly the same result, I haven't found any log to explain the failure, would you have any idea ?
One thing I noticed is that the Lion Disk Utility on the ESD image is not able to verify the RAID volume (permissions or disk), it just does nothing, with no error. Unplugging the SSDs from the mobo may be my last option...
HELP ! ;-)

OK, NOW I get it... What I was trying to install was the MacOS Lion Server DMG from the Apple Developer site - of which I am a paying member.
As soon as I stopped trying that approach and opened the Appstore application on my machine, clicked on purchases, saw the LION SERVER entry (which is what I purchased) and clicked on INSTALL, everything went perfectly well and my problem is solved.
YEAA!

Similar Messages

I have Lion 10.7.3 can i install lion server

I have Lion 10.7.3 installed on my iMac can I install Lion Server without having to do a clean install?

Yes from what I read Lion server is just an Application that run on, ,and changes certain things, in the normal Lion OS.

Can you install Lion server but still use the mac as normal?

I have a Macbook Pro and I would like to install Lion server. I was wondering if when I buy it off the mac app store if it works like any application so I can like close out of the server and use the mac as normal like to get on the Internet, or if Lion server installs like a new operation system and I can't use my mac as normal?
Thanks
WirelessCharge

Welcome to the Apple Support Communities
Of course. On Mountain Lion and Lion, Server is just an app, so you can close it and turn off its services whenever you want to use your Mac as usual, although you don't have to close Server app to use the computer as normal

Can't install lion server

Hi Apple Support Folks,
My MacPro will not allow me to upgrade to Mountain Lion. OK.. So I am now running MacOSX Lion and wanted to add the MacOSX Lion Server software.
I purchased Lion Server via telephone call to Apple, downloaded and otherwise received - license.pdf, etc - all of the goodies.
then, when it came time to install the software, the installer reported:
I have no clue as to why this is a problem. Can anyone suggest how to move on from this point?
Thank yo

OK, NOW I get it... What I was trying to install was the MacOS Lion Server DMG from the Apple Developer site - of which I am a paying member.
As soon as I stopped trying that approach and opened the Appstore application on my machine, clicked on purchases, saw the LION SERVER entry (which is what I purchased) and clicked on INSTALL, everything went perfectly well and my problem is solved.
YEAA!

Can I install Lion Server using ARD?

I've got a 2008 xserve I'd like to update to Lion Server (from 10.6.8 server). Can I successfully install it using ARD or is it going to hang at some point without ARD access waiting for some kind of input to proceed with the installation?
Thanks
Eric

Yes. You need to buy Leon and Server via AppStore. Think twice before click [buy app]... read posts on this group.

I installed Lion Server and when I click on the Profile Manager I get an error and nothing shows - I can't figure out how to re install Lion Server to fix this - any ideas

I installed Lion Server on my Mac Pro. Everything looked to be working until I checked Profile Manager and I get an error message "Error Reading Settings" Not sure how to fix it. Tried to download Server agian but can't.

Look at /usr/lib/libpq library. I have had the same problem. There were following files:
-rwxr-xr-x 1 root wheel 163680 30 jul 21:17 /usr/lib/libpq.5.4.dylib
lrwxr-xr-x 1 root wheel 15 30 jul 21:20 /usr/lib/libpq.dylib -> libpq.5.4.dylib
Result for command sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh was:
Password:
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Couldn't drop device_management : #<RuntimeError: Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)>
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/activerecord/lib/active_record/connection_adapters/abstract/connection_spe cification.rb:76:in `establish_connection'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:69:in `create_database'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:31
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `call'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 597:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor. rb:242:in `synchronize'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 590:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 583:in `invoke'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2051:in `invoke_task'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2023:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2001:in `run'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 1998:in `run'
/usr/bin/rake:31
Couldn't create database for {"adapter"=>"postgresql", "username"=>"_devicemgr", "encoding"=>"UTF8", "pool"=>5, "database"=>"device_management"}
devicemgr:state = "STARTING"
There was missing symlink to right version of libpq dynamic library!
After I entered the following commands and now it works well for me:
$ cd /usr/lib
$ sudo ln -s libpq.5.4.dylib libpq.5.dylib
$ sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
devicemgr:state = "RUNNING"
Milan

Serious log in issues after installing Lion Server

Hi all,
I am relatively inexperienced with software involving essentially anything technical, so you will have to pardon my ignorance.
I am currently trying to set-up a wireless network at home using Lion Server, and it would appear I have bitten off more than I can chew. I installed Lion Server on Tuesday, and have been battling with it ever since - attempting to use a 'We Got Served' guide to walk me through.
I installed the Server app on my iMac as I figured the 3 computers on the network would not require very much space, and so there would be little point in buying a whole new machine to run it from. Whilst I was having little luck in making it work as I had hoped - I have now managed to completely lock the iMac. Since it's installation I have had no issue logging in and out of my actual account on OSX, however earlier the computer froze following an Adobe update and I was forced to do a hard restart. However, when I attempted to log back in I now get the following error:
"You are unable to log in to the user account "xxxx" at this time.
Logging in to the account failed because an error occurred."
I have tried everything in my limited knowledge to rectify this, and nothing works it would seem. I've read examples of this happening when trying to log into the actual server app, or where the hard drive is corrupt on the machine itself - this seems to be a hybrid of the two.
I can no longer open the computer in Safe Mode, however when I go into Disk Utility all disks when verified appear to be absolutely fine with disc repair making no difference. The only available drive is now listed as a Server drive so I cannot even re-install Lion on there.
This is causing me much distress as I can as far as I can tell not only log into my computer, but can do nothing to repair the issue bar erasing everthing from it. There is a lot of important data on there and I am confident that it is not actually corrupt, however Server seems to have just locked it completely.
Help would be much appreciated!

I am having a similar issue, but in my situation, my users cannot log in. All of my users are network users on Mini's. I am running 10.6.8 on my server. I have created users before with no issues, but have not done so in months. When I try to log the new user in, I get the following error:
xpchelper: Could not get path of user account (uid:1029) home directory:/Network/Servers/server.xxx.net/Volumes/Data/Users/username; error; The operation couldn't be completed. No such file or directory. Using home directory.
CFPreferences: user home directory at file://localhost/Network/Servers/server.xxx.net/Volumes/Data/Users/username/ is currently unavailable. User domains will be volatile.
Authorizationhost: error |-[homedirmounter mount NetworkHomeWithURL: attributes: dirPath: username:]|PremountHomeDirectoryWithAuthentication (url=AFP://server.xxx.net/Users/homedir= /Network/Servers/server.xxx.net/Volumes/Data/Users/username, name=username) returned 5.
I have no idea of what to do. I have verified that the user looks the same as my other users in WGM. The user's folder was created on the server. The user has access to the folder. I'm not sure what else could be wrong here.

Can we Install SQL Server Express with Advanced Services x 64 bit for our testing purpose without procuring any license? Also can we use it for commercial use if we are neglect risk sof using it on Production?

Can we Install SQL Server Express with Advanced Services x 64 bit for our testing purpose without procuring any license? Also can we use it for commercial/Production
use if we are agree to take risk of using it on Production?

Hi,
Yes you can, but you should be aware of the limitations of MS SQL Express version.
1. 1GB RAM
2. 10 GB database size per database excluding log file (SQL 2008 R2 and above)
3.Job Scheduling service is not available with SQL Server Express.
4.Data import and export feature is not available with SQL Server Express.
5.Limitation on number of CPU
Refer following article for features supported by different editions of MS SQL Server.
Features Supported by the Editions of SQL Server 2012
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

Do I have to install lion before I can install lion server?

I want to install lion server on my iMac, but I'm not sure if I have to buy lion 1st. HELP

Hi,
Yes, at first you have to install lion and then you can buy/download the server.app to install the server stuff on it.
S.

How do i install Lion Server on OS 10.7.2?

I have tried several times to install Lion Server on my iMac. But with no luck. Is says when it try to install:
Can't install Server Essentials because it is not currently available from the Software Update server.
And then i search on the net. And found, i think a reason, why i can't install.
It is that it can only be installed on 10.7.0 and not on 10.7.2, inspite it said in the App Store under requirements: Mac OS X 10.7 or later.
Is there any there have some experience with this problem?

http://reviews.cnet.com/8301-13727_7-20027867-263.html. P.S.-I found this link in about 5 seconds by using google.

Can't get Lion Server to work

Hi
As written above. I can't get Lion server to work.
I have succesfully installed the program, and turn on some of the services. Then I have bought a domain, to connect to my server. But if I try to connect to my IP, from another computer, it doesn't connect. I have tried to "port forwarding" port 80 on my router, and given my Mac a static IP. I have checked with a "Check port opener" if the port 80 was in reach, it was.
So my question is, what is the next I can do to make it work. First with the IP and then with my domain?

Yes, SMTP used to work but stopped after new cert applied. IMAP works fine. Removed SSL and still doesn't work (although should it be restarted or is save for changes okay).
Log:
Nov 10 12:30:39 colquhoun postfix/postscreen[29668]: CONNECT from [168.144.32.45]:54598
Nov 10 12:30:39 colquhoun postfix/postscreen[29668]: PREGREET 29 after 0.07 from [168.144.32.45]:54598: HELO www.unlocktheinbox.com\r\n
Nov 10 12:30:39 colquhoun postfix/smtpd[29669]: connect from unlocktheinbox.com[168.144.32.45]
Nov 10 12:30:42 colquhoun postfix/smtpd[29669]: lost connection after HELO from unlocktheinbox.com[168.144.32.45]
Nov 10 12:30:42 colquhoun postfix/smtpd[29669]: disconnect from unlocktheinbox.com[168.144.32.45]

Can I install Windows Server 2012 r2 essentials over Windows 7 Pro

I have new hardware that came with windows 7 pre-installed. It meets and exceeds hardware requirements. Can i install Windows Server 2012 R2 Essentials on this machine. What is the procedure? Any help would be grateful.
Thanks
Woodrow

Hi.
I agree with Milos on this; if you want to install Windows Server 2012 Essentials on a machine which suppose to use Windows 7, I would use it solely for test purposes.
Could you tell us what the computer specifications are???
For anything more serious (and I can see that you want to use this machine for accounting software), I would suggest purchasing a server machine.
However, if you really really want this machine to be Windows Server 2012 Essentials, check this article on technet:
Install and Configure Windows Server 2012 Essentials
How to wipe out HDD
P.S. As Milosh sugested, please do a backup first
Backup your system, programs, and files
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

Install lion server

Can you keep your old settings and files when installing Lion Server over Lion?

"other things that might go wrong"...is that simply a comment on the history that major upgrades typically do strange things until the bugs are worked out
It was a CYA statement
Oobviously, Lion is not yet available publicly so it isn't possible to tell how soothly the migration procress will go. If it's anything like previous versions it'll work fine for 99% of users and the remaining 1% will be very vocal about how awful it was for them.
Overall, I just didn't want to be in a position where I said "you'll be fine" only to find that something non-CPU related cauces a hiccup.
In my opinion, if you only have one server and it's important to your business, hold off a little and let the dust settle. You won't lose mch by waiting a week or two, and that's long enough to get a feeling for how well it works.

I can't install weblogic server 10.3 found error

I have install to 65% and found error.
i want to know why i can't install weblogic server 10.3 (may be error was create by jdk or anything else Please tell me! )
and how many problem that can happen when install weblogic server 10.3
ps. - OS that i install is windowsXP sp2

Without giving us any details about what error you got, or any circumstances of your environment (just the OS isn't enough), there is no way anyone could give you any help.

Does installing Lion Server mean: No Sleep ?

Hi,
I have the problem, that my iMac won`t go to sleep automatically after the time I setup in the energy saver settings.
I can get it asleep, if I select Sleep in the Apple menu, but it is only working manually.
I already tryed resetting PRAM, NVRAM, SMC and I even already did a clean install of lion Still the same problem.
But I also installed Lion server and I could imagine this is a problem.
Is here anybody, who installed Lion server and who can confirm, if his Mac falls asleep by itself or not?
If Lion Server is the problem, I would do another clean install without Lion Server, so my mac will sleep again. I would prefer
not to have the VPN service, but having a Mac, who does not consume power all the time...
Without Lion Server I can still access it with VNC or ARD and the iMac would be waken up by the "Wake on Demand" feature.
Regards
Florian

I know did again a clean installed of Lion without installing the Lion Server.
Now the sleep mode works again.... So it seems, that installing Lion Server is responsible for the iMac not going to sleep.
I installed Lion server because of the VPN functionality. I got this working without Lion Server by using a smart tool EasyVPN, which allowed me to setup OS X Lion as VPN server (PPTP and L2TP) without having Lion Server installed. you can get this tool at: http://www.squashedsoftware.com/products-easyvpn.php
Perhaps this is useful for somebody...
Regards
Florian

Can't install Lion Server. Any log anywhere ?

Similar Messages

Maybe you are looking for