Can't install new Security Update (PPC)

Hi. Im trying to install the new security update for PPC, but somehow i cant. When Im about to choose the destination, the installer said that "You cannot install Security Update...(PowerPC) on this volume.This volume does not meet the requirements for this update."Kind a weird but Im installing it on my iMac's HD & my system is running 10.4.8. I hope somebody can help me.Thanks in advance.

Use Software Update to install the security update. Repair Permissions before and after.

Similar Messages

Hi, i have question about my macBook pro. I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have.

I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have about Mac´crack that **** formatted and has really nothing to the HD. what do I do??
<Edited by Host>

Cami87,
which model MacBook Pro do you have, and which version of OS X is installed on it?

I can't install new software update!

I can't install new software update! for my Nokia 6500 slide.
when install the new software on to my laptop, Vista home premium, service pack one.
It give me this error "error 2738 could not access VBScript run time for cutom action".??????
Can anyone help me please?
How **bleep**.

Impossible to say without more details other than "I can't install". If you'll post full details, including whether you're attempting to update from the iPad directly or from iTunes on a computer, where things are breaking down, what error messages if any you're getting, and any other details pertinent to your issue, then someone can perhaps offer suggestions.
Regards.

Problems after installing new security update-help?

Hi, how can I verify what I recently downloaded on my mac. I installed the security update from software update, and i want to make sure I downloaded something intended for my machine. I have doubts as my machine runs like **** now. Apps take forever to open, screensaver comes on when its set to never, printer won't work, etc. Also, if it was just a bad download, can I just try loading it again over the last one? First, I'd love to see what i downloaded. Thanks. In a bind. Never had this happen before. Running 10.3.9
m

Hi Matthew,
First of all, you should be able to check in your HD/Library/Receipts folder to see what has been installed by looking for the .pkg of it.
re: "I installed the security update from software update, and i want to make sure I downloaded something intended for my machine"
You should not be offered updates that are not intended for your System through Software Update. Software Update, as far as I know, reads the .pkg files in your Receipts folder and will offer what you need from that. (I believe that is correct....perhaps someone will correct me if I'm wrong)
Did you Repair Permissions from Disk Utility before and after the update?
If not I would try running Repair Permissions (HD/Applications/Utilities/Disk Utility/Repair Permissions).
I've found that with Security Updates that it is very important to Repair Permissions before and after updating.
littleshoulders [:-)

Installed New Security Updates--Now Photoshop Won't Open(?)

I just installed some mac security updates as prompted. I'm pretty lazy about updating so I'm sure that this was not a brand new update. After restarting my laptop, I found that my copy of Photoshop CS2 will no longer open. The program will begin to launch, but then shut down before opening. The usual "program has unexpectedly quit" prompt pops up.
I have since unistalled and reinstalled Photoshop. Same problem with the fresh installation.
What is going on? The rest of Creative Suite is running fine...
How can I overcome this?

sssboyle,
First of all, Welcome to the  Discussions Forums!
Have you tried Repairing Permissions from Disk Utility found in your Applications folder>Utilities?
When open click on the First Aid tab. Select your HD in the left pane and then click on Repair Permissions.
See if that helps,
littleshoulders

Can't install latest security update

Hi all,
Hope Someone can help me out in this problem. I've been installing the latest security update (Security Update 2008-002) for many times, but every time the installation bar reaches its end, I get this message:
A networking error has occurred: Error NSURLErrorDomain -1005 (-1005). Make sure you can connect to the Internet, then try again.
I'm quite confidant that the Internet connections is working properly. This problem has occurred more than 5 times!
Any suggestions guys?
BTY, I'm using the Safari 3.1, if this has anything to do with the problem.
Thanks...

boabdo wrote:
Sorry for my late reply but I lack of high-speed Internet connection at my place.
*Hi boabdo, Welcome (Back)* to Apple's Users Help Users Forums.
Take a CD and a smile to a friend w Mac and DSL or an AASP or a Public Library w Macs or an Internet Café w Macs. I add the "w Mac" cuz I saw a thread where DL was PC version. For a SU that may not be relevant so even if PC it may work.
Good Luck, JP

Lenovo Care upgrade can't install Client Security update.

Hi !
Laptop is 3000N200 (0769-BAG) Upgraded to Windows XP.
Since a couple of weeks, when I launch Lenovo Care assitant and look at upgrades for my system, it finds Client Security Solution Version 8.2 but the installation finished immediatelly and said that it was not installed. I don't know why, I can't see a log file nor an error message. If I launch the assistant again, it finds the same update availlable again...
What is wrong with this ? And how can I fix the problem ?
TIA !

You should check out my detailed post in the following thread:
http://forums.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&message.id=5649
However, I'll summarise.
a) It seems that the system update application tries to load version 8.2 (of the Client Security Solution) on top of version 8.0
b) It seems that you cannot go directly from 8.0 to 8.2; you [manually] have to go via 8.1 which is available here (vista/xp):
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-69128
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-69733
Of relevance to diagnosis was that you really need to do a manual install to actually see the error message rather than just have the install fail silently. Overall, however, it was reading the various related web pages that yielded the needed information (see the post I referenced above for the detailed information).
Lastly, when doing the manual installs I did receive an additional error message related to the version of finger-print software I had loaded. I now believe that this was a red herring, but it did lead me on a wild goose-chase (read my other post for the gory details).
Good luck and post your experiences back here!
George.
Message Edited by jzkgeq on 08-30-2008 02:49 PM

Can't install standalone security updates

I have windows server 2008 r2 standard +sp1 and need to install the 2 following updates:
kb2271195
kb2124261
We need to install these for PCI compliance and when I try to install them I get the following:
windows update standalone installer
the update is not applicable to your computer

On Mon, 17 Feb 2014 14:15:11 +0000, marcel1297 wrote:
I have windows server 2008 r2 standard +sp1 and need to install the 2 following updates:
kb2271195
kb2124261
We need to install these for PCI compliance and when I try to install them I get the following:
windows update standalone installer
the update is not applicable to your computer
Both of those updates, as per the associated KB article are only applicable
to 2008 R2 RTM. They are not applicable, again as per the KB articles to
2008 R2 SP1.
If whatever software you're using to determine PCI compliance is reporting
that a 2008 R2 SP1 server is out of compliance then that is a false
positive and you should push back on the vendor of the compliance tool.
Paul Adare - FIM CM MVP
I just went visual on this goofy looking Finn riding on a gnu, wielding
one pissed off penguin... gah -- Bob The Sane

"a new security update was installed on your Mac"

I was using my Macbook Pro this morning, and the update bar came up on the right top screen, so I said "remind me tomorrow".
Less than a minute later, a box popped up in the same place which says "Security Update Installed A new security update was installed on your Mac"
I am submitting the question because I haven't had this message before, nor did I authorize an update this morning.
Is this malware or a new service in OS X Yosemite 10.10.1?
Also, when I tried logging into the apple forums using my keycode and password, it said my account is locked for security reasons. I logged in the old fashioned way, typing my information and got in.
Thank you!

It is possible that the recent security update was installed automatically.
You can verify it. If the info is as shown below, there is nothing to worry.
Click  in the menu bar.
About This Mac > More Info.. > System Report > Software > Installations
Best.

I can not install new update in Photoshop CC, does any one know, how I can install the new update?

I can not install new update in Photoshop CC, does any one know, how I can install the new update?
Photoshop CC show me, if I look on "Help" -> Update, there is no update. But my actual license is very old....
I tried it, to do it manual. But there is also some problem.

totally agree. at this point i could care less if "apple" supports it. i'm not renting my ipod touch, it's mine. i paid for it. and i'm not asking to do anything illegal with it, all i want is to get rid of this POS ios6 and get back to being able to use my ipod touch the way it was before...working.

I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

1)Copy this below from --{code} to --{code}
--{code}
set p2l to "" & (path to library folder from user domain)
set the_cache to p2l & "Caches:com.apple.iWork.fonts"
tell application "System Events"
          set maybe to exists disk item the_cache
          if maybe then delete disk item the_cache
end tell
if maybe then
          display dialog "I deleted the file :" & return & the_cache
else
          display dialog "The file :" & return & the_cache & return & "was unavailable !"
end if
--{code}
2) Than open Applescript Editor in your applications and paste it
3) Than select "Compile"
4) Than select "Run"

Macbook pro mid 2006 (Intel Core Duo) how can I install new OS ? I cannot update the 10.6.8 and new software doesn't work anymore

Macbook pro mid 2006 - how can I install new OS ? I cannot update the 10.6.8 version and new software doesn't work.

A Core Duo Mac can't be upgraded past 10.6.8.
(123371)

Since 28th December I can't install new apps and can't update my newspaper. How can this problem be solved?

I can't update my newspaper "Welt HD", nor can I install new apps from the app store.
When I try to install an app, only new Icon shows up and is showing "waiting" forever. When I tried to update my newspaper, it only shows "loading" forever.
When my iPad connects to the W-LAN, for a sudden I have IP Traffic in downstream. When I turn off my iPad, the traffic goes away.
I tried to turn off and reset my iPad several times with no result.
Many thanks for all tips,
Regards

The problem is solved by using backup from iCloud.

After installing the Security Update 2015-002 many system app icons have switched. How can I fix this?

I Installed the Security Update 2015-002 on March 13 on my 13-inch Macbook Pro (mid 2010) running Yosemite. However after it rebooted many of the system app icons have switched places. For instance: The delete button in finder has the icon for Full Screen (while others are just plain white). And the button for New Message in Mail now shows a search icon. Please see screengrab below.
IS there a way to fix this mess without having to manually change all this?

I have some new info on the issueI thought I'd share with you.
First of all, I've installed Photoshop CC on my SurfacePro (Windows 8) and do not have the lag issue there. It's very similar hardware to my MacBook Pro. So the issue must have something to do with my MacBook.
After a lot of tinkering I discovered that it is my 27" Thunderbolt Display that is causing the brush lag. When I unplug it and only use my built in 13" screen the brush lag is gone. Aha!
I tried every available option in the Performance section but nothing helped. Again, Photoshop CS5 with attached Thunderbolt Display doesn't have a brush lag issue.
I'd be interested to know everyone else's setup who is experiencing this problem.

Can't access admin account after new security update

After installing a security update for OSX 10.4 on my G4 Tower I can no longer log into my main account. The trouble started with Keychain issues, I reset the keycain and now can't log in. I can login using the other account, but not my admin account.

Per solution noted i this topic http://discussions.apple.com/thread.jspa?threadID=1321572&tstart=0

Can't install new Security Update (PPC)

Similar Messages

Maybe you are looking for