Can't install NI-DAQ 6.6

Hi.
I have bought DAQCard-1200 and I can not install NI-DAQ 6.6 for work with
LabVIEW from CD. I have Win 98 SE.
The first stage of installation passes normally, after that the computer is
restarted and the installation a component for LabVIEW 5.0.1f begins. I do
not see the text in dialogue windows.
Help please.

Hello,
This is a problem I've had a few times, untill I discovered what it was.
You have to change your Local/Region Settings to America (or US).
Try this and you will notice it will work!
Koen Hoogstoel
National Instruments Belgium
Vadim Gnatkovsky wrote in message
news:[email protected]..
>

Similar Messages

I can't install my DAQ in Windows

I have an AT-MIO-16XE-10. I saw ways to install the AT-MIO-16E-10 in widnwos, bu nothing about the XE. It doesnot appear in the add hardware list along with all the other types of boards. I have installed the newest drivers...
Can anyone help me?

Keegan,
According to the NI-DAQ compatibility page, the AT-MIO-16XE-10 is also known as the NI 6030E: http://www.ni.com/support/daq/versions.htm. Note also that it will not work with NI-DAQmx or on Windows XP.
To ensure proper installation of the driver and your board, make sure you follow these step-by-step instructions: http://www.ni.com/support/install/
Have a great day!

Can not install Ni Daq 7.2

I downloaded the files from the web for 7.2
When I start setup it tells me that instmsia.exe and instmsiw.exe are not in the correct folder. However they do exist in my temporary folder where i downloaded the software

Was there an error number associated with this error message? It's possible that you may need to reinstall your Microsoft installer software. This is discussed more in the knowledge base linked below. Also note that NI-DAQ 7.2 is not supported by Windows 9x, ME operating systems. Respond if you still experience difficulties after following directions in the KB.
Installation Errors

How can i control the DAQ directly from VB

Actually, it is my first trial to use Visual Basic to get signal from DAQ.
And i don't how to interface them. I have read an article to use DataSocket.
However, it demostrated the OPC demo in OPC sever only, and so i didn't know
how to get the signal directly from DAQ card to monitor the real-time
signal.
Also, i have tried to build a .dll from my VI file which is used to monitor
the DAQ signal. However, the .dll file didn't have any return value or
argument, did it mean i can use this method?
And how can i interface the DAQ using VB?and my ADC model is AT-MIO-16E-2!
Thank you very much

Hi Sen,
Are you using Measurement Studio ? If so then you can use the DAQ activeX controls.
If not and you are using VB directly, then NI-Daq installs with examples for visual basic ( if you chose the option while installing- if not do a custom install and choose VB support). If so then you should find them under Program Files ->National Isntruments->NI-DAQ->Examples->VisualBasic. These may help you.
Essentially NI-DAQ ships with a .bas file that contains the "declares" for the NI-DAQ dll functions. These files should be in
Program Files ->National Isntruments->NI-DAQ->Includes (look for the .bas files) You can add these to your project to get access to the DAQ functions..
On the second question, do you mean you are using labVIEW to create your dll ? If this
is the case, then when you create your dll (in labVIEW's applciation builder) you have to set the parameters for the function (VI) and also the VI's return values. This will ensure that you can make use of your VI ..If you don't set a return value you really can't use it...Once you set the return value ,and create a dll, then you can use it like any other dll in Visual basic.
Hope this helps...
This link may help you
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/5052ad60f1accc3d862568a100717fd1?OpenDocument
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

Error 1406 when installing Ni-DAQ 6.8.1

Hi,
I get and error 1406 when trying the install Ni-DAQ 6.8.1 on a Winfows 95
machine. Registry key access is not being allowed when the installation
tries to update the registry keys
Any ideas what causes this. I can find no reference to this error code
Thanks
Neville.

Neville;
There is a limit to the number of entries in the HKLM\Software\Microsoft\Windows\CurrentVersion\SharedDLLs key, at least on Win95. By removing some other entries, the problem will probably be solved.
Hope this helps.
Filipe Altoe
Applications Engineer
National Instruments

Error when install NI-DAQ 7.4

When I install NI-DAQ 7.4 I got this message : ''Developer Erorr :The following errors where found in your ini file :
1. Specified file not found: [MsiEngine] Win9xPath = suppfiles\instmsia.exe
2. Specified file not found: [MsiEngine] WinNTPath = suppfiles\instmsiw.exe
Exception code: E06D7363 ()
Fault address: 77E738B2 0001:000128B2 C:\WINDOWS\system32\kernel32.dll ''
Can anyone help me to install this software???....... please.
Note: I had Traditional NI-DAQ (Legacy) Version 6.9.2 but I uninstall it because it does not support the NI DAQ Assistant.

Hello rammo,
Are you trying to install this from a cd or did you download the file from our website?
If it is from a cd, I would recommend copy the contents of your cd to your hard drive and then installing it from there.
If it is from our website, I would try to download it again, or try the
installation on a nother computer. It is possible that the file
somehow became corrupted when you were trying to download it.
Just out of curiosity, are you installing NI-DAQ 7.4 Traditional? If you want the newest version of NI-DAQmx, it is version 7.5!
Eric
DE For Life!

LabVIEW can't find NI-DAQ driver (error 10240).

NI-DAQ is installed, and all the tests in the configuration utility work
fine with the PCI 1200 card. I can see a sine wave from a function
generator, so NI-DAQ works. But no DAQ VIs run, neither the examples
included with LabVIEW nor test programs I've written myself. Error message
10240 is always displayed: "NI-DAQ: LV can't find NI-DAQ driver."
I am working with an older setup, trying to recover an experiment from years
ago. It's a Power Macintosh 7500 with a 100MHz 601 processor and a PCI 1200
DAQ card. LabVIEW 4.0 installed. I've tried downloading several versions
of NI-DAQ from the NI site, but I can't find any support for LabVIEW 4.0.
Currently NI-DAQ 6.6.1 is installed, the version recommen
ded on the site for
Power Macs.
Does this version of NI-DAQ not work with LabVIEW 4.0? If not, what version
of NI-DAQ will work? Is there some way to tell LabVIEW where the NI-DAQ
driver is?
Upgrading LabVIEW or the hardware is a last resort. I just want to get this
experiment running as soon as possible.
My email address is [email protected]

Thanks. But the version of NI-DAQ that was installed when I wrote the email
was NI-DAQ 6.6, and still the error message appeared. I've since pulled the
card and put it into a PC with a more recent version of Lab VIEW and it
works.
"Ryan M" wrote in message
news:[email protected]..
> The latest version of NI-DAQ supporting LabVIEW 4.0 is NI-DAQ 6.6.
> More information regarding this can be found in National Instrument's
> Knowledge Base at:
>
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/d8d43c0b1b
881101862569eb005cda39?OpenDocument
>
> Ryan Mosley
> National Instruments, Applications Engineer
> http://www.ni.com/exchange

How many computers can I install my Creative Cloud apps on?

You can install the apps available in Creative Cloud on your primary computer and one backup computer, as long as they are not running at the same time. You will have access to both the Mac OS and Windows versions, so if you have a Mac at home and a PC at work, for example, you can install your applications on both. See the product license agreements page for more information.
Read more in the Creative Cloud FAQ

Jeff,
Here is a concern I have. I called sales support yesterday and asked the following questions.   I have 3 computers (1) PC tower, (1) iMac and (1) MacBook Pro.   When I first started using Adobe all the way through CS5 Master Collection I always owned the Windows Box Versions. I have been waiting for months for this to come out so I could move my workflow over to MacOS X.    Since the Creative Cloud supports both MAC and Windows installs the question I asked was can I install it on both my 2 Mac Computers. Then if I need to use it on my PC can I simply deactivate and then activate on it for use?
The answer your support person gave was "YES" So the answer in this topic don't even flow with the answers from calling the 800 number!
So now reading this forum topic I am really confused.   I like many others have definate reasons why I may want to flip flop the machine I am using the software on (1) I have $4500 worth of AE plug-ins. $2000 worth of these are platform specific. So they only run on a windows machine. Even, though I intend on my primary workflow to be used on a MAC there may come a time when I need to use one of these plug-ins and then would have to switch my activation to the PC to use it.
Another scenario, Let's face it Apple has not been to keen on upgrading the Mac Pro system's. iMac's are great but have their limitations with graphics cards, drives, and memory. So if you go a complicated AE render to do,iIt makes a lot more sense to run it on a PC at this time for me. So my hope here is I would de-activate one of my MAC's activate my PC then render away.
I like many others completely understand that we are only suppose to operate our software on 1 machine at a time. I am cool with you checking this. Other posters have asked what if I forget to turn one machine off leave with my MacBook Pro and then fire it up. Will I be in trouble? Not sure how you handle this if you don't have a connection. But Spotify the music streaming company license their software to me the user. If I fire up one machine, Then grab my iPhone and try to listen it turns it off on the other machine. Apps in the app store like MotionX Drive do the same thing.
I am an Electrical Automation Engineer by day and a Graphic/Video Designer Enthusiast at night.   In all the programming software that every vendor provides they provide a licensing server software service that sits locally within the location. It manages concurrent licenses, without the need for online connections. Any computer needing to run simply pulls the license from the network connected license server software service. When the program is done it releases the license. The only issues with this is if your license server crashes. It can be a bit of a headache with support to get your license back.   Others simply have an online site (like Apple) Where you simply log in and de-activate devices as needed. (Heck even Hulu, and Netflix offer this.)
I think if Adobe wants the Cloud thing to take off then they need to re-evaluate this. The license needs to follow the user not the device. The user should have a painless simple way to activate and de-activate their license back to their Adobe ID.

HT4722 How many computers can you install Final Cut on

How many computers can you install Final Cut on with one license or purchase?

This is an excerpt from the FCPX license, available here.
http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
2. Permitted License Uses and Restrictions.
A. Mac App Store License. Subject to the terms and conditions of this License and as permitted by the Mac App Store Product Usage Rules set forth in the App Store Terms and Conditions (http:// www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non- exclusive license:
to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
(ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library.

How many computers can you install software on

I have elements 10 installed on one computer can I install it on another?

I am pretty sure you can put on two computers. I think after you put the serial number in, Adobe will let you know whether you can put another copy on or not. It keeps track of how many times you've installed it. I hope that makes sense.

How many times can i install?

Well guys this is the problem, i've got parallels and boot camp and i am looking at getting windows xp home sp2 to run on my mac but then i realized you can only install it on one computer. Does installing it in bootcamp and parallels count as two computers or one? If they count as two, does anyone know a way to install on both?
hope this makes sense!
Tom

That is correct, but i am wanting to install separately because there are some features disabled by this.
But thank you for replying!
Also can i add that i am able to use VM ware if that helps in any way.
Message was edited by: iMac are the best

How many laptops can I install on with only one lightroom 6 license? (not cc version)

I read from somewhere that one creative cloud account can be used on two different devices, but what about the lightroom 6 version?
If I pay $149 for lightroom 6, how many laptops can I install on? I now have one windows laptop and one mac.
Thanks for helping.

I selected yours as the correct answer because of the webpage you provided, but I cannot understand that what "only use it on one computer at a time".
If the software is for offline use, how does it know if I'm running it on another computer?

How many machines can I install on with one Mountain Lion download?

I want to upgrade to Mountain Lion, but I have both an iMac and a MacBook Pro. Do I have to buy two Mountain Lion downloads - one for each, or can I somehow download twice after paying once?
Judy

Actually, having made the same claim a couple of days ago and being proven completely wrong, I have a certain responsibility to correct you by mentioning that there is no limit to how many machines ML can be installed on, as long as you own or control those machines.
See section 2B(i): http://images.apple.com/legal/sla/docs/OSX108.pdf

How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first

Please help!!
How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?

Thank you for your answers, it helps me a lot.
But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images.

Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!

Sean L. wrote:
I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!
The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
Printer on, and if networked, use a static IP address
Print & Scan
IP
Provide printer static IP address
Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
Add
Configure Driver under Options and Supplies
I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
Hopefully, you have already sorted this out.

Can't install NI-DAQ 6.6

Similar Messages

Maybe you are looking for