Can't install niDAQ 6.9.3 with Labview 8.0?

I'm trying to install the legacy drivers for my new/used DAQCard-1200 for use with Labview 8.0. For reference, I've also installed Labview 8.2 evaluation. I've downloaded both niDAQ and Labview 6.1 eng support and ran setup with it all in one directory. The problem is that the Labview 6.1 Support option has a green checkmark next to it and the description says it "won't be installed", that it is already installed and that the installed version is higher than what I'm trying to install. Any suggestions?

At this point I would recommend attempting to:
1) Make sure that National Instruments Software is not listed under Add/Remove Programs (and if it is, uninstall MAX and go from there). Should look something like this:
I don't mean to harp on this point, however it is very odd that the folder is not there at all...
2) Possibly use System Restore to revert back to a point before you 'manually uninstalled'
3) You could also try to use the Driver CD. That should detect the software on the system and you may be able to remove/modify the software that way.
If this does not work, then we may have to work on this "offline" and have me contact you directly. If you give me permission, I can get your contact information from our web team and we can go from there.
Message Edited by Neal M on 10-23-2007 04:24 PM
Neal M.Applications Engineering National Instruments www.ni.com/support
Attachments:
AddRemovePrograms.JPG ‏115 KB

Similar Messages

How can I install attachments for SAP notes with zip-files ???

How can I install attachments for SAP notes with zip-files ???

Can you elaborate on your question? How exactly is your question related to SAP NetWeaver Portal: Application Integration? If you are really asking how to install attachments contained in SAP notes, there is no automatic/general way and you should ask your question in the Software Support and Maintenance space to begin with. What SAP note(s) are you looking at installing?

Why I can't install Flash Builder 4.6 with a Master Collection Serial Number?

Hi all,
downloaded Flash builder 4.6, i had a Master collection 5.5 suite which includes (obviously) Flash Builder 4.5,1.
I found that I can’t install the 4.6 version with the serial number of the Master Collection.
The Adobe support told me thet I can’t install the single packet but I can upgrade the entire suite of (probably) six months when the 6.0 version will becomes available.
I feel cheated.
I spent a lot of money to buy and upgrade the entire suite and now I can’t upgrade Flash Builder only.
Can you help me?
If there is not a solution I think I'll nerver upgrade the suite anymore, I'will port all of my mobile code in Objective-C and "tanti saluti".

Deeptika's answer is very helpful.
Now, this is how I activated the FB 4.6, using theMaster Collection CS 5.5 serial number:
1.- Uninstalled Flash Builder 4.5 from the MC (Select the 'Delete preferencies'- checkbox).
2.- Deleted and cleaned all program's cache with CCleaner.
3.- Installed Flash Builder 4.6 in TRIAL MODE, and -IMPORTANT!- Be sure that you are selecting the SAME LANGUAGE on wich you installed your Master Collection!!
(I had some troubles because I didn't remember that I installed the MC with "Español", and I tried to install FB 4.6 in "Español (Latinoamerica)").
4.- After a reboot of my PC, I opened Flash Builder 4.6.
5.- It asked me for a serial number, I had to wrote down my Master Collection's serial number.
6.- I was happy because my FB 4.6 serial number was accepted, (after three unsuccesful attempts because of the wrong language installation).
So, everything is about languages.
In the last case, maybe you should uninstall your entire Master Collection (including Flash Builder 4.5) and then reinstall it (without FB 4.5). Then install FB 4.6.
Yep, this is a little annoying, but now I can use the Flash Builder 4.6. It worth the work.
Let us now if you could install your FB 4.6 succesfuly.
Regards!

Am in france how can i install itunes in my laptop with english lenguoges

am in france how can i install itunes in my laptop with english lenguoges

Set your computer language to english.
Cotrol panel > Region and language.

Can I use third party DAQ boards with Labview real time?

I have an Adlink DAQ 2010 card that I curently use with labview. Will this card also work with Labview real time? What requironments are there for 3rd party cards to work with Labview real time?
Thanks!

Hello George,
Here is a great link for you to take a look at: Can I Use a Third-Party Device with LabVIEW RT?
Have a great day,
NathanT

Hi I would be grateful if someone can help me, I have just bought a canon wireless printer, I only have an iPad so I can not install the cd that comes with the new printer yet it says it is compatible. How do I get it working I have a pay as you go 3G sim

I do not use the Internet using wifi I use 3G mobile broadband and if I do need wifi it tells me I have to pay for it, but I can not work out how to install or connect my iPad with my new printer if there is not a cd slot or USB port. I only have an iPad no computer so how on earth do I use my printer with it if it I can't install the printer cd. I though I would be able to use Bluetooth and it would pick it up automatically but I am really confused now and don't know what to do please help.

The iPad uses AirPrint technology to print to a printer. Check this Apple support page to see if your printer is listed as being AirPrint compatible.
http://support.apple.com/kb/ht4356
If your printer works with AirPrint you will need a Wi-Fi network in order to connect. That Wi-Fi network does not need to be connected to the Internet. As James Ward4 says, you'll need a Wi-Fi router to set up your network. Most routers require that a computer be used during the setup process. Perhaps you could use someone's computer to do the setup if you do not had one yourself. Once the router is set up you should be able to print.

Can I install windows 8/8.1 with bootcamp 4?

Hi,
I have a iMac from late 2009 with an intel core 2 duo cpu,According to the apple website I can only install upto win7 on bootcamp 4 & bootcamp 5 in incompaticable. Is there any way I can run win8.1 on my imac without using such softwares as parallells?

If the Apple site said you can't, then why do you think asking here will change the answer?
What makes you think Boot Camp 5 is incompatible? If you can install Mavericks then Boot Camp 5 was installed in the Utilities folder.

Can't install Windows on my iMac with 16 Go !

Hello !
I bought an iMac i7 3.4 GHz SSD + 1TB drive and 4GB of ram. I replaced the 4 GB of RAM with 16 GB purchased from Crucial (4 strips 4GB with a priori the same features as the apple strips which are Samsung ...).
Everything is fine when I use Mac OS 10.6.8. No memory problem.
By cons, can not install Windows 7 32 bit or 64. An error occurs during the installation process : 0x80070570. After a little research on the forums, it is an error that may be due to a corrupted media - for example broken record - but this is not the case : my window installed itself perfectly on another computer.
The experience of other users evokes an error caused by memory. So I reinstalled my original bars of 2 GB. And there, no problem of installation. Windows is working properly. After reinstalling Windows, I replaced my memory with my 4 bars crucial,"and there is the drama." Windows becomes unstable : crashes, errors of registration,software installation... useless... I run a diagnostic memory test that went smoothly ! Obviously, the memory does not seem corrupted, especially since it works well on Mac OS 10.6.8.
So I decided to link the two strips origins (2 GB each) with two crucial strips (4 GBeach), a total of 12 GB of ram. And it works.
Do you have an explanation for this problem? Do you know how I can install Windows with my 16 GB crucial?
Thank you.

You make no mention of how your are attempting to install MS Windows so it's a little tough to help you. If you are using Boot Camp please use Boot Camp Assistant and if you still have problems please post in the Boot Camp forum. If you are using virtualization software (Fusion, Parallels etc.) then use the instructions that came with their software and if you still have difficulty please post in their forums.
Roger

Can you install Tiger onto a drive with data?

Hello,
I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
Its a long story but here is a quick summary of why I am attempting to do this:
I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
One other question:
When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
Thanks for any suggestions.

Thanks scb and Jeff,
Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
Thanks for the new safer direction.
[1] Coolmax (CD-311-SATA Combo)
Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
$69.95
http://store.yahoo.com/directron/35enclosure.html
$53.99 at directron

Can I install Tiger on external drive with OS9 on internal?

I bought and plan to install OS X 10.4.3, but will continue to use OS 9.2.2 about 95% of the time because I can't afford to update all 3rd-party software at this time, so I want to start up in 9.2.2 usually. Can I install 10.4.3 on a partition of my external HD with firewire and leave 9.2.2 on my internal HD, then pick a start-up OS by a key combination or such? How should I do it, and what problems might I encounter? To partition my external HD should I use OS 9.2.2, the original 9.0 CD, or the new 10.4.3 DVD?
I have a Power Mac G4 (AGB Graphics) with an internal 10 GB HD and an almost-empty external 120 GB firewire HD (Iomega). Thanks.

Welcome to Apple Discussions!
Yes you can do that, though I'm not too sure that Iomega's firmware is up to date to do it. Be sure that any data you have on the Iomega is backed up elsewhere before attempting it. Some Firewire drives without up to date firmware from the manufacturer may become invisible and unusable after a software update on Mac OS X 10.3 or later. Also an AGP PowerMac needs its firmware updated while booted from Mac OS 9 before installing Mac OS X 10.2 or later:
http://docs.info.apple.com/article.html?artnum=86117
That said, if after testing you find it does work, you can switch booting between both drives using the Option key booting as described in the Startup Manager article:
http://docs.info.apple.com/article.html?artnum=106178
Leave OS 9.2.2 on your internal, and 10.4 on your external. That will be a lot easier than partitioning. Some information I wrote for others which can help you on your migration to Mac OS X is provided in this link below:
http://www.macmaps.com/macosxnative.html
If you really want to partition, be aware that only third party software is available to partition without erasing the entire drive, and you'll want to make sure additional partitions that will boot Mac OS 9 have Mac OS 9 drivers installed as my link above states. Whatever you do, be sure you have at least two copies of your data at all times:
http://www.macmaps.com/backup.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

How can i install solaris10 on my pc with winxp

hello
i m completely new to this os. can anyone let me know "how can i install solaris10 with winxp on second partion. is it as simple as installing two windows together. how much space will solaris require(i have only 40gb hard disk ).

Fdisk your hard disk and create two partitions
Install Windows as normal onto the first partition
Install Solaris onto the second - Solaris will install a bootloader which will allow you to select which OS to boot if you carry out the installs in that order.

Can't install Creative Media Lite - Clash with Windows XP Home SP

Zen Stone GB. Firmware: .6..
My PC: AMD Athlon 3200+, Windows XP SP3, IE7, Windows Media Player .0.572.5230
Can't install Creative ZEN Stone Starter Pack ..08.
When InstalShield runs I get the following message:
>SetupDLL\SetupDLL.cpp(298)
PAPP:Creative Media Lite
PvVENDOR: Creative Technology Limited (www.creative.com)
PGUID:A99CB37-AEBO-492F-A85A-8A2536D22393
$9..0.429
@Windows XP Service Pack 3 (2600) !E 7.0.6000.6640
Followed by Error Code 5002.
I've check that my system spec. meets Media Lite requirements and suspect a clash with XP SP3.
Any suggestions on how to complete the installation of Media Lite will be much appreciated.

Here's 2 messages from Creative Customer Support. Looks like there may be a clash with SP3 so, 'Come on Guys', let's get it fixed.
I will be forwarding this to our ASG, and we will be looking more into this matter. And we would probably have a patch released for this issue in the near future. Best Regards,Creative Customer Support ServicesCreative Labs Europe
I was able to talk to our Advanced Support Group (ASG) regarding this issue. And according to them, that it might be possible that SP3 would be the reason why you are unable to install the Creative ZEN Stone Starter Pack. According to our ASG, that the main difference between SP2 and SP3 is network security feature called Network Access Protection, which scans the integrity of a computer before connecting to a corporate network, which is absolutely useless for end users at home. As being one more security feature in Windows XP, this can possibly cause various problems with multimedia applications.
Best Regards,Creative Customer Support ServicesCreative Labs Europe

I need ministation air app but i can't install it in app store with my accunt

i need "ministation air" app, but i can't install it with my accunt

If the app is not available in your country app store, then you cannot install the app.

Can't install iWork on iPad mini with retina

I Just bought a iPad mini 2 with iOS 8.1, but I can't install iWork in AppStore
It was said that 'you must update it to iOS 8.0'

If the applications are all showing waiting attempt tapping on one of them to see if it is merely in a paused state. If tapping on the app does not continue the install connect the device to a computer with iTunes and transfer purchases. This may ask you for your Apple ID. Transfer purchases: right click on the device from the sidebar and select transfer purchases or select File>Devices>Transfer purchases from "iPad".
Once the applications are transferred to iTunes attempt to sync the device. If this still does not resolve the issue you may need to navigate to the apps portion of of the device in iTunes and select remove for the applications that are stuck waiting, sync, and then select install and sync again. Hope this helps.

Can't install or update my KMS with KB2885698

Hi!
Hopefully I found my way to the right forum now....
So I'm running Office Pro 2013 using a KMS, this worked great in Windows 8, but after the update to 8.1, it has stopped working...
I've understood that a way to solve this is to install and update the KMS host by the use of this file: KB28885698
However when I'm trying to install it, it says that it is: "not applicable to my computer"....I have tried with versions: x64 windows 8 and x64 windows 8 server 2012...nothing works...
So how can I make my KMS work in Windows 8.1?
Cheers!

Hi
I have my KMS host over Windows Server 2012 R2. However i Can't load keys for Windows 7 and Windows server 2008.
the error that displays is:
error 0xc004f050
@Gary, this is expected.
You cannot, and do not need to, install Win7 nor WS2008 keys into a newer KMShost OS.
If your KMShost computer OS is WS2012R2, you must use the WS2012R2 KMShost product key, which will activate the KMShost OS itself, and also activate the KMShost features for serving all KMSclient OS versions/editions.
A KMShost, when running on WindowsServer OS, will issue activations for all KMSclients at the same OS version/edition and all lower version/editions.
You can only install ONE KMShost product key on a KMShost.
(note that Office KMShost function is a totally different story)
So, if your KMShost OS is WS2012R2, you need a WS2012R2 KMShost product key.
If you don't have a WS2012R2 KMShost product key, and if you aren't entitled for that, you must choose a different OS for your KMShost.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Can't install niDAQ 6.9.3 with Labview 8.0?

Similar Messages

Maybe you are looking for