Can't install OS X on new internal HD

I've got a MBP (15"), and have put a new internal drive in it (160 gig). However, when I attempt to reinstall OS X (the version I have for my MBP disks is 10.4.5)it keeps telling me that OS X can not install onto my hard drive. I had kept the previous OS up to date, installed the firmware patches, etc.
Does anyone know what might be going on here? I've tried repartitioning the drive (HFS+Journaled), erasing it, creating 2 smaller partitions, etc. but nothing seems to be working.

Do this:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Once the formatting has completed quit DU and return to the installer. Proceed with the OS X installation.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Similar Messages

  • How can I install logic 9 on new mac 10.8

    how can I install logic 9 on new macBook pro 10.8?
    My Cd rom shows Logic 7 and on the old mashine (MacBook white 10.6) I have Logic pro 9.
    My MacBook pro 10.8 does't accept the Cd Rom...
    Regards
    Paul

    Kerrse,
    ...and it's content?
    While your method will get the app itself across.. the content will present a possible problem, though once it is updated to 9.1.8 the OP could try the "in menu' option to download content but the essential stuff normally gets installed from the DVDs initially with LP9 Boxed set... so it may not be as easy as simply copying across the app only.
    However, worth giving a try.....

  • I can not  install apps in my new ipod touch ios 6

    i can not  install apps in my new ipod touch ios 6
    it is showing appication is failed to installed
    why is this happening
    can any one help me....

    The problem is when i drag n drop downloaded apps from torrentz into itunes n syncronize it add those apps into my itouch ... but the message shown in my i touch is .. that application failed to install..
    in the itunes those appliacations are unchecked automatically ... but i can install apps which are downloaded from the istore .... they are working properly
    but the ones i downloaded from the torrentz are not getting installed..

  • I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    Oliver,
    Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
    Here is some help on activation if this is the issue:
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Pattie

  • How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work

    How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work in CC.

    Your key cannot work in CC, it's newer version, and would require a new purchase.
    Downlaod CS5 here.
    Download CS5 products

  • I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

    I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

    That's easy.
    2 methods:
    1. Change the Startup Disk in System Preferences, then restart:
    2. Hold down the "Option" key while starting or restarting the Mac. Then chosse the partition that you want to startup from.
    The 1st mehtod is the quickest, because you don't have the additional step of choosing the drive. Plus, whatever you have selected in System Preferences becomes the default startup drive.

  • Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"

    Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"

    Have you completed all windows update including service Pack1?  If not, please complete all the windows update then follow steps below to re-install all over.
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime  
    Apple Software Update  
    Apple Mobile Device Support  
    Bonjour  
    Apple Application Support
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Can i install bootcamp on the new iMac late 2012 "27"?

    can i install bootcamp on the new iMac late 2012 "27" without fushion drive?

    You have two possibilities:
    1. Buy the USB SuperDrive and install Windows from a disc.
    2. Use an USB drive with the Windows 7 installer inside.
    Boot Camp isn't compatible with Windows 8, so you will have to wait. Also, the Late 2012 is only compatible with the 64-bit Windows 7 edition

  • Can I install Tiger in my NEW 21.5" iMac ?

    Can I install Tiger on my NEW 21.5" iMac ?
    Machine bought new - Nov. '09.
    While I do like some of the features in Snow Leopard... almost all my existing software plus the Sims 2
    games will apparently NOT run (or run well).

    Rosetta does exactly that. It was created to run MacOS X programs that only ran on PPC macs to run on intel processors. Rosetta would translate PPC machine instructions into intel instrucions on-the fly.
    Classic Mode was a whole separate operating system. Rosetta merely translates PPC to intel so it is generally invisible to the user.
    I have used Quicken '05, iMovie HD, AppleWorks and Microsoft Office under Rosetta with no issues. Photoshop 7 was the only program I have that choked and would not run. I would guess that the Sims program would be most likely to not run. They might have an intel update available, I know that Zoo tycoon 2 had a patch to allow for intel processers, The Sims might, too.
    Some programs have "fat binaries" with both versions. If you are curious, you can see whether you are running intel or PPC-translated by using the activity monitor.
    You don't need to run Rosetta separately, if it is needed it turns itself on, so the programs install normally. In fact, some programs needed Rosetta just to run the installer, the actual software ran on the intels.
    I think I have the same machine as you, I just bought my new 21.5" iMac last month. I love it by they way, a DVD that would have taken all night to burn was done in a little over an hour!

  • Can I install Panther on an extra internal drive to swap into another G5?

    Bear with me on this long explanation...
    I have a G5 that won't boot (lock on grey apple screen and then the fans blow wildly). I can't get the optical drive door to open unless it's in target disk mode with my powerbook -- where the drive door opens fine...but not when trying to boot the G5 on it's own. Unfortunately - this is preventing me from booting from the G5 Panther install discs.
    I used Disk Utility while in target disk mode to verify/repair the disk and the report says the drive is fine (which I know doesn't mean it is free from corruption)...but if I then try to boot the G5 on it's own --- grey screen and I'm stuck. Seems like the G5 startup disk has died.
    Also tried to boot from a FW drive with a cloned copy on it. Holding down option on restart --- I get the icon for an OSX volume (which is the FW drive)... click on the icon to select it (doesn't seem to do anything) but if I then hit the right arrow icon -- it goes back to the frozen grey screen.
    OK -- here is the question:
    Can I use my wife's G5 that runs Tiger to install Panther from my G5's install discs onto an extra internal drive that I can drop into the empty drive bay on the Tiger G5 --- and then install that extra internal drive (hopefully with panther now installed) into my G5 as a brand new start up disk?
    If so -- are there any things that I need to do other than the procedure above?
    Any help would be greatly appreciated.
    Thanks in advance!

    When installing Panther on the extra internal drive using the G5 running Tiger --- can I just insert the install discs into the Tiger G5 optical drive while it is already running and perform the install onto the extra drive
    No. You have to boot from the installer disc to install any OS.
    or would I need to restart the Tiger G5 with the install disc inside the optical drive and hold down c on restart to reboot from the Panther install discs and select the extra drive as the install destination?
    Yes.

  • Installing Snow Leopard on New Internal SSD (without External drive)

    All,
    I have been searching and searching for a sufficient answer for this question, but have come up short thusfar. So any help or direction would be greatly appreciated.
    Basically I have an early 2009 MacBook Air (RevB) with a 128 GB HDD (not SSD). It has been painfully slow the past few months, and with the move to SSD for the new Air's - I've decided to swap my older HD for a new 64GB RunCore SSD (using the online guide from iFixit). However, as the MacBook Air inherently has no DVD drive - and the new HD will completely blank and not allow for the DVD Sharing to take place, I'm a bit stuck.
    Here's where the complication sets in - I do not have (and would really rather not purchase) an external Superdrive or external DVD drive just for this one process. However, I do have a MacBook Pro that I would like to use to install Snow Leopard onto the new blank internal SSD.
    Finally, I would also like to install Snow Leopard cleanly (i.e. not cloning my existing MacBook Air HD first).
    Therefore, my BIG question (in three parts is:
    1) Can I install Snow Leopard onto the new internal SSD before I install the new SSD itself into the MacBook Air (i.e. the new internal SSD comes with an external enclosure to presumably allow for cloning prior to installation). Therefore, can I just install Snow Leopard from my MBP's Superdrive to the new SSD using the new SSD + Enclosure as an external HD?
    2) When complete, and then installed in the MacBook Air, will the new internal SSD boot correctly?
    3) Finally what formats should I go for (GUID, Journalled, etc.) - or is that not really applicable in this case?
    Hopefully that all makes sense...?
    And thanks in advance!
    -Eddie

    Okay just copied this from a tutorial on how to do it.
    *OSX 10.6 method for bootable USB key install*
    Insert your retail DVD into drive.
    Plug in usb key. I recommend getting at least a 16gig drive so you don’t run into capacity issues.
    Open Disk Utitlity. Locatied in Applocations/Utitilties/DiskUtitily.app
    Partition the USB drive and select GUID in the options so it will be bootable on a Mac.
    Select restore and drag the image of the DVD on the left into the input path.
    Drag the USB drive into the destination drive.
    Click the restore button.
    Sit back and relax cause you will be waiting for about 20-30 mins for the key to be formatted properly.
    Hope this helps

  • Can I reformat and partition a new internal hard drive with the Snow Leopard disk?

    I'm planning on installing a new internal hard drive in my 15'' Macbook Pro. Can I format and partition the new drive with the Snow Leopard disk or is it just an upgrade from Leopard? Thanks much.

    You should be able to do that.
    If you want to change the sizes of existing partitions this may help:
    Enlarging a partition

  • Can't install itunes on my new laptop w/ Windows 8 64bit

    So, I am trying to install the newest version of itunes on my Dell with Intel i3 Windows 8- 64 bit system.  I had itunes on my old laptop (running Windows Vista) and it worked just fine, but when I tried to install it on my new dell, I get as far as downloading (itunes64setup.exe) and after it is done downloading and I try to install it, it gives me a pop up that says something along the lines of "this app can not be installed on your system- contact software manufacturer for the correct version for your system"  I spent several hours on the phone yesterday with an apple rep and they weren't able to resolve it either.  They had my delete the itunes that I had just downloaded, turn off my internet protection and try downloading the same one again.  It downloads, it just won't install afterwards.  When that did not work either, she had me try installing the standard 32 bit version, still nothing.  Then she had me install the older itunes 9.2 to see if that would install and then I could just update it afterwards, but that would not install either after downloading.  I tried restarting my computer and then downloading it again, same issue.  I've been using the newest version of Firefox, but I tried downloading and installing it in IE.  Same issue. Tried IE w/out internet protection, same issue.  As a last resort I saved the itunes installation from my old laptop on a flash drive and tried to install it on my new laptop from the flash drive and it almost seemed like it would work, it started the installation wizard, but after a minute it stopped and said that it was a 32bit version and that I needed the 64 bit version for my system.  That is actually the farthest I had gotten with any of my tries.  It would not even get to the installation box with any of the other tries!!! If any one knows a solution for this, I would be so greatful!!! I tried the tips from past discussions and it did not resolve it.  HELP!!!

    http://support.apple.com/kb/HT1926

  • How can I install Aperture on my new Macbook Pro. I am up to date with my Mac Pro, I have the Aperture 1 and installation disks but cant remember how I got to 3. Can anyone help?  Many thanks regards Alf

    I have an up to date version of Aperture on my Mac Pro, and I would like to install it on my new Mac book Pro. I have the original installation disks for Aperture 1 and 2. I cant remember how I got to Aperture 3, I think it was via a web download but not sure. I have checked my purchases in the App Store but there is no indication of me buying an upgrade to Aperture 3.
    Ive tried to download it from the App Store but it wants me to pay again.
    Can anyone help on how to install Aperture 3 on my new Macbook .
    Many thanks regards  Alf

    Then you can download the Trial version of Aperture 3 and unlock it with your serial numbers - you will need all three for all three versions: A current link to the Trial version is in this support document, also instructions on how to reinstall on different systems:
    Aperture 3.4: May quit unexpectedly on launch after updating
    Regards
    Léonie
    BTW: Your Aperture 3 serial number will be displayed in the "About" panel - the panel you see, when you use the command "About Aperture" from the Aperture menu in the main menu bar.

  • How can I install iWork '09 on new MacBook with Lion?

    I have an install DVD for iWork '09 (9.0.3), and I've been running iWork on my iMac for several years without a problem, even after upgrading to Lion. Now I have a new MacBook Air with Lion preloaded and am trying to install iWork on the new machine. I was able to install from the DVD using drive sharing, but when I try to open Pages, Numbers or Keynote, I get a message that says "Pages cannot be opened because of a problem" -- presumably because I need to update iWork for Lion. After downloading the iWork 9.1 update, I tried to open it but get an error message that says "A newer version of Keynote has already been installed."
    This doesn't make sense to me, since the version I installed from the DVD is definitely older. How can I update iWork to run on my new machine?
    By the way, I tried just copying the programs from my iMac with AirDrop, and I get the first error message I mentioned above.

    MN,
    I don't know why the Drive Sharing idea didn't work. I can think of reasons that copying with AirDrop wouldn't work.
    At some point you may just want to give up and purchase Pages using the Mac App Store. It's ridiculously cheap and easy.
    I worry that you have so much inoperable iWork stuff on this computer that it needs a good clean-up, whichever way you decide to go.
    Yvan Koenig has a script to do the purging of old copies of iWork files that you can run before you make any more attempts at installing iWork or any of its components. It the last item on this page as of this writing...
    Script Link
    Jerry

Maybe you are looking for

  • Is there a way to remove files when they are in used

    i got a file in the trash when i restart log of or shut down the files keeps saying in used its a exe fie i would this as a exe file it will not let me delete it and when i move it it stays in there and keeps cloning its self Pls help me as its been

  • How to centre in internet explorer

    I have created a simple site in Muse, and when I preview it in Chrome or Firefox it is perfectly centered as it is in Muse, but when I look at it i any version of internet Explorer it is off centre. The site is at Home Cheers Ian

  • Old .ecs files from Sony Ericsson P900

    Hi Everyone, I saved some voice recordings of my daughter learning to read on my Sony Ericsson P900 ages ago (2005). I have a variety of back-up files for this phone (the files are titled like this: My P910 2005-02-04 23.41.32.ecs). I can't open them

  • Extract Albums and Tags from files and add back to Organizer

    Had problem with computer and had to reload the Photoshop Elements 6 again and pictures located in my files. When asked if I wanted to add the Tags etc I said yes. Although the pictures loaded the Organizer ok the tags and Albums did not load. I see

  • How to Escape % in the JSP href

    I have the floowing string String temp = "<A HREF=\"BasicEmployeeInfo.jsp? EmployeeStatus="+employeeStatus+"&LastName="+lastName+ "&SortOrde r=EmployeeV1.Badge\">Badge</a>" When the lastName = 'smith%', the % sign causes error for me, how do I escape