Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

just bough OSX Mountain Lion, my laptop operating with v10.6.8.  Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion.

Similar Messages

  • Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

    Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

    Read
    https://discussions.apple.com/message/15659267#15659267

  • Can't install MAC OS X Lion - Macintosh HD "This disk cannot be used to start up your computer."

    I downloaded OS X Lion this morning and when I went to install it I got a "Screen - Select the disk where you want to install OS X."  -- Had two disk my Macintosh HD and my Time Machine (both are 1TB).  The top and most important is the Macintosh HD (999.86GB - 739.75GB available states "This disk cannot be used to start up your computer".  What do I need to do to install OS X Lion?

    Create a Backup Lion Bootable 10.7  Disk
    Purchaseand download Lion from the Mac App Store on any Lion compatible Macrunning Snow Leopard.
    Right click on “Mac OS X Lion”     installer and choose the option to “Show Package Contents.”
    Inside the Contents folder that     appears you will find a SharedSupport folder and inside the     SharedSupport folder you will find the “InstallESD.dmg.” This is     the Lion boot disc image we have all been waiting for.
    Copy “InstallESD.dmg” to     another folder like the Desktop.
    Launch Disk Utility and click the     burn button.
    Select the copied “InstallESD.dmg” as the image to burn,     insert a standard sized 4.7 GB DVD, and wait for your new Lion Boot     Disc to come out toasty hot.
    With this disc you can boot any Lion compatible Mac, and install10.7 just like you installed previous version of Mac OS X. You caneven use Disk Utility's Restore function to image your Lion boot discimage onto a external drive suitable for performing a clean installon a optical-drive-less MacBook Air, or Mac mini server.
    If your using Mac's in a mission critical type environment or have third party hardware or software you must rely upon working correctly. It's advised to wait until all the bugs, driver updates, third party software updates and other issues are resolved before upgrading. This might take several months. Then if you do so, do one machine at a time and carefully test everything before full deployment.
    It's also highly advised to backup all one's data either manually to a external powered drive in addition to TimeMachine and Hold option bootable Carbon Copy Clones etc.

  • Install error : disk cannot be used to start up your computer [or] MediaKit reports partition (Map) too small

    Greetings,
    I am aware that this problem has been discussed, but in long and vague discussions that I had to sift deeply to find an answer. Therefore I am posting a clear message, as this problem can be very troublesome for someone who just received a Mac OS installation disk and cannot install it.
    Situation : you cannot install/update your new system because the installer does not consider your volume.
    Error message : this disk cannot be used to start up your computer.
    Version française : Ce disque ne peut pas être configuré pour démarrer votre ordinateur.
    Also discussed below error: "MediaKit reports partition (Map) too small"
    Note : although this occurred with a Snow Leopard (10.6) install DVD, it can alo occur with Lion (10.7) according to discussions on Apple web site.
    IF YOUR CONDITIONS ARE AS FOLLOWS :
    - You are using an official Apple installation DVD of Mac OS 10.6 (Snow Leopard) [or 10.7 Lion] or an official download/upgrade of those systems.
    - Your main Mac partition scheme is in GUID as it should be (check with Disk Utility). That partition contains a Mac system that can start-up.
    - Your volume format is: Mac OS Extended (journaled) [the format should not be Case Sensitive.]
    - You have the hardware requirements to install Mac OS 10.6 (Intel processor; internal or external DVD drive or a linked DVD drive; 1 GB of RAM; a screen controlled by your computer graphics card; at least 5 GB space on the hard disk or 7 GB if you install all components).
    - Using Disk Utility, you of course tried the disk Repair Tool and the Repair Permissions tool.
    - Your hard disk does not have a file called Backups.backupdb (if it does, this means Time Machine has once used this hard disk for its back-ups). Anyhow, if it were the case, the installation would give a different error message (with the word TimeMachine). This file may block the installation: Apple Support suggest to place it in the garbage, *without* deleting it, and placing it back on the disk later. Mind you, if you do not use this hard disk as such to save your Time Machine back-ups, you can simply delete this file.
    HOW TO FIX :
    1. Boot with the 10.6 install DVD (Tip: you can either select Mac 10.6 as the boot DVD in your Start-up Preferences or simply press down c during the start-up).
    2. Above the install screen, you have a Utilities tab from where you can run Disk Utility. Select your hard disk and select the Partition tab. Resize the primary Mac partition (don't add a new one) by decreasing it by about 5 GB.
    It will look like this http://i.imgur.com/jHTbr.jpg
    ( That image shows only one partition, but the same principle applies even if you have two or more partitions on your disk.)
    Also see the official Apple how to: http://support.apple.com/kb/TS3926
    Version française: http://support.apple.com/kb/TS3926?viewlocale=fr_FR
    3. Commit the change by hitting "Apply"
    3.b. If you get the error "MediaKit reports partition (Map) too small", this is a rare error where the partition that follows (for example Bootcamp) is slightly overlapping your main Mac partition. You will need to reduce that other following partition. Once you have reduced the other partition, you will probably need to return to step 2 and 3 and try again.
    [ For example, in my case, I had resized my Bootcamp with CampTune software and it would seem that the file system ended-up somehow larger than the actual partition container. I simply asked CampTune to reduce the partition a bit (barely 2 GB) and that fixed it.]
    4. Reboot, again into the 10.6 install DVD.
    5. You can then install 10.6.
    6. Once 10.6 is installed, use the Disk Utility on the desktop (you can boot into the primary HD at this point) to resize the primary partition back to its original or maximum size.
    SOURCE (main fix): http://forums.macrumors.com/showthread.php?t=774410 [and] http://support.apple.com/kb/TS3926
    SOURCE (explaination for MediaKit error): some Apple discussion post.
    nb: in my case, it was on a MacBook Pro (late 2008).

    GasMan4932 wrote:
    When I click on the icon for this drive, the warning message below states "Mac OS X cannot be installed on 'iMac HD', because this disk cannot be used to start up your computer." Obviously that's not true, since that's where the OS is installed.
    How did you partition this drive, if you did that? Does it contain start up or utility partitions for any other OS (for instance Linux)? There have been reports that the "cannot be used to start up your computer" message will appear if a third party utility was used to create a 'triple boot' system or such, apparently because SL is picky about the format GUID partition scheme table info & how partitions are allocated space on the drive by other formatting/partition methods.
    For some users with these partitions, the fix has been as simple as "tickling" (slightly changing) the partition size of some partition with Disk Utility, which apparently updates the GUID partition scheme table info so that the SL installer accepts it as safe to use with SL.( In this sense, the message may be trying to say the installer thinks the disk can't be used to reliably start up your computer with SL, not in general.)
    See the discussions topic Cannot install Snow Leopard over 10.5.8 for more about this.

  • Can't install:  "this disk cannot be used to start up your computer"

    After making sure that my current startup disk for 10.5 was imaged to another hard drive, I inserted the Snow Leopard install disk and double-clicked the Install icon. Everything worked fine till I got to "Select the disk where you want to install Mac OS X." All of the disk partitions had warning triangles, including the one for my original startup disk, which has worked perfectly for the 10.5 pre-installed on my new iMac (identifier 9,1). When I click on the icon for this drive, the warning message below states "Mac OS X cannot be installed on 'iMac HD', because this disk cannot be used to start up your computer." Obviously that's not true, since that's where the OS is installed. No other programs were running except Finder.
    I used Disk Utility to check the disk and repair permissions: no change in the installation program's message. I quit the installation program and reinserted the DVD. It certainly does a lot of churning of the DVD before you ask it to do anything. With all external hard disks disconnected, it still gives the same error message.
    Where do I go from here? I thought Snow Leopard was "The world's most advanced operating system. Finely tuned." It can't even install itself and recognize a bootable internal hard drive on an iMac.

    GasMan4932 wrote:
    When I click on the icon for this drive, the warning message below states "Mac OS X cannot be installed on 'iMac HD', because this disk cannot be used to start up your computer." Obviously that's not true, since that's where the OS is installed.
    How did you partition this drive, if you did that? Does it contain start up or utility partitions for any other OS (for instance Linux)? There have been reports that the "cannot be used to start up your computer" message will appear if a third party utility was used to create a 'triple boot' system or such, apparently because SL is picky about the format GUID partition scheme table info & how partitions are allocated space on the drive by other formatting/partition methods.
    For some users with these partitions, the fix has been as simple as "tickling" (slightly changing) the partition size of some partition with Disk Utility, which apparently updates the GUID partition scheme table info so that the SL installer accepts it as safe to use with SL.( In this sense, the message may be trying to say the installer thinks the disk can't be used to reliably start up your computer with SL, not in general.)
    See the discussions topic Cannot install Snow Leopard over 10.5.8 for more about this.

  • Mountain Lion wont install on macbook. "This disk cannot be used to start up your computer"

    Basically, when I try to install the mountain lion update onto my Snow Leapard OS, I get the above message. Something must be wrong with my hd configuration.
    I think the problem was caused when I tried to install linux on a partition before this and failed miserably time after time; I think the problem was that reFIT wasn't recognizing the proper partitions to boot into. Anyway, I also noticed that even after deleting the defunct linux partitions using Disk Utility, the linux drives still showed up in the reFit startup menu. Did I screw up my HD? Is that what is preventing me from installing Mountain Lion? If so, how can I fix it?
    Thanks.

    Go to System Preferences > Startup Disk and press Macintosh HD. Open > http://support.apple.com/kb/TS3926

  • Mac OS X cannot be installed on "Macintosh HD", because this disk cannot be used to start up your computer

    I have a macbook pro with snow leopard on it. I am giving it away to a family members, but would like to erase the disk before giving it away. When I put my snow leopard dvd in, and click "install", I get a screen asking me to select the hard drive to install on. When I click the only one listed: "Macintosh HD", I get the message:
    Mac OS X cannot be installed on "Macintosh HD", because this disk cannot be used to start your computer
    If I try to boot from the dvd, my mac just hangs on the gray screen that shows the apple logo. Basically I put the dvd in, shut down the computer, when I turn it on, I hold the "C" key, and it just hangs.
    How should I go about erasing everything on the computer, and re-installing the OS, I just want it to look like it did when it came from the factory. Any help would be much appreciated.
    Note: I lost my original install dvd, so I called Apple and asked for a replacement, they charged me $20 and sent the Snow Leopard disk that I am using as my replacement.
    Thanks.

    It's possible you got a disk from Apple you can't use. What you should have gotten were gray disks based on the Mac's serial number so you would get disks which were identical to the ones it came with.
    If the disk you received has a picture of a Snow Leopard on it, then they sent you a 10.6.3 retail disk, which will not have any of the bundled iLife apps on it.
    Much more important is the point release. If your Mac originally came with 10.6.4 or some later point release of Snow Leopard, then 10.6.3 will not install on that Mac. The necessary hardware drivers are not on the retail disk.

  • When I try to authorize my computer I receive a message saying you cannot authorize 5 computers at once. I only have one computer

    I have made several purchases from the Apple Store, But when I tried to access them I receive a message that says 'Your computer is not authorized to play this track/album'. So I try to authorize and another message says 'You cannot authorize 5 computers at once.' What does this mean? I only have this one computer.

    At some point other computers were autorized on your account.
    Open iTunes and go to the iTunes store > Accounrs (in Quick Links section on the right) > sign in > From the you can use the Deauthorize All option. Apple limits use of this to once a year. After all are deauthorized you will be able to authorize your computer.

  • Mavericks won't install because Macintosh HD "cannot be used to start up your computer"

    I've searched around, but I haven't found a solution yet. Any ideas?

    Thanks for the quick response. I had already found this while searching for a solution, and it unfortunately didn't solve the problem. I'm in the process of backing up right now, I wanted to avoid reformatting and reinstalling, but it's looking like that might be my only option.

  • I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.   My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.   We only have one copy of iTunes and we have been sharing t

    I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.
    My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.
    We only have one copy of iTunes and we have been sharing the account. (She doesn't really use the computer for anything beyond writing the odd weekend assignment.)
    Would I be better off setting her up with her own and making her as a separate user on the computer? Would this require much work?
    In recent times with updates, we have a few problems with the duplication of texts and that sort of thing. Both of our texts are stored on the computer and that sort of thing. Also, sometimes texts I send her are sent through to me  from her, if that makes any sense.
    Anyway, I don't really want to overly complicate matters when it comes to accounts etc, but I wanted to know if a fresh Apple ID would be the best thing or even a new user?
    Any tips etc would be greatly appreciated
    Thanks in advance
    MacBook
    I have this question too (0) Reply

    Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac"   maybe thats why nobody answered you.
    It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
    since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well.   I prefer to keep things simple, but...........you and yours,  I dont know.......
    http://support.apple.com/kb/PH11468

  • I keep getting notified I have an update available but when I try to update I get the following msg ,"You have updates available for other accounts". I only have one account with apple and purchased the software when I got my macbook in Aug 2012.

    I keep getting notified I have an update available but when I try to update I get the following msg ,"You have updates available for other accounts To update this application, sign in to the account you used to purchase it.". I only have one account with apple and the software was preinstalled when I purchased my macbook in Aug 2012 with that account. Has anyone had this problem or know how to find out what account apple needs?

    You log into the App store using the same Apple ID you used to set the computer up, verify that none of your apps are hidden and that they have all be accepted and then download and install the update
    for help contact the App store support - link is on the right ot the App store window
    LN

  • Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message:  "this iPhone cannot be used because the Apple Mobile Device service is not started".  What does this mean? I have had this phone for over a year..

    Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message:  "this iPhone cannot be used because the Apple Mobile Device service is not started".  What is the issue, had this phone over a year??

    I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
    You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
    If this doesn't work, I would look into your anti-virus' settings. Good Luck!

  • I just got an iphone and am trying to connect it to my itunes account.  Getting the message " This iphone cannot be used because the Apple Mobile Device service is not started.  How do I start it?  Have already been back to the store with it and no change

    I just got an iphone and am trying to connect it to my itunes account.  Getting the message " This iphone cannot be used because the Apple Mobile Device service is not started.  How do I start it?  Have already been back to the store with it and no change.

    http://tinyurl.com/3hs3g2u

  • I am unable to sync with my computer, I get a message ; This iphone cannot be used because the Apple Mobile Device service is not started.e

    I am all of a sudden unable to sync my iphone with my computer. I get the following error message: This iphone cannot be used because The Apple Mobile Device service is not started.

    my iphone with my computer
    Windows?
    Instructions here >   iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • When I try to sync my iPhone with my computer I get this message "This iPhone cannot be used because the Apple mobile device service is not started" What does this mean and how can I fix it?

    When I try to sync my iPhone 4S with my computer, I get this message: "This iPhone cannot be used because the Apple mobile device service is not started" What does this mean, and how can I fix it?

    means that apple mobile device service needs to be started try this article to get it turned back on
    Restart apple mobile device service

Maybe you are looking for

  • Licensing and Version

    What is the current release state and licensing issue with using XML Beans? Is the product still in beta? Is the code generated free of any limitations for use w/in my applications or is this just a trial service? Is there a plan to release the compi

  • Error: Service Of Directory

    somebody would know with deciding this problem? It was not possible to connect to the directory for the following reason: error of directory service It verifies if the supplied information are correct or enter in contact with the administrator of the

  • Pricematch vs Cancel Order + Repurchase

    Hey guys. I'm new to the forum (so be easy and if there is a thread where this should be, don't call me a newbie because I already know I am one, and just point me in the right direction. Thanks!) and I have a question that requires immediate attenti

  • Password not recognizd

    password not recognizd

  • Can't get Office365. Error message

    Hi all, I got this flyer about a free Office365, and when I tried to download it I got this message " ERROR An error occurred while processing your request. Please contact your helpdesk or user ID office for assistance. This service requires cookies.