Can't install OSX on Seagate Barracuda 1TB in Mac Pro1,1. Any ideas?

Hi all
I've got a Mac Pro 1,1 and just installed a new Seagate ST1000DM003 3.5 inch 1TB Barracuda Hard Drive.
I was hoping to install OSX on it but seemingly the OS won't recognise it.
The drive is formatted (Mac OSX Journalled) is GUID, and boots perfectly normally as a storage space.
But for some reason I can't fathom neither my OSX 10.4 disk nor Snow Leopard disk will recognise it at the moment of installation.
Anyone got any ideas? does this sound like a lemon or is it some limitation of the Mac Pro 1,1?
Any info gratefully rec'd!
Cheers
Alex

You mean it mounts normally when used as a data storage volume (not boots perfectly).
So clone the system to it.
Can you check it with Seatools? on a PC or Windows.
Assume it is in bay 1 thru 4.
What and when and how did you manage to format it to GUID w/ HFS+?

Similar Messages

How can I install OSX lion on my completely wiped mac mini?

I have a 2011 mac mini server edition (Without CD drive), and tried to partition it to a RAID0 last night. I reformatted both drives (Just the inner partitions, so It shouldn't have affected the recovery partition), and now it will not boot.
When I turn the computer on, it flashes a question mark folder, and when I boot with option, it gives me a list of wireless networks on a grey screen. When I select my network, it logs into it, but doesn't do anything further. It will not let me boot into the recovery partition at all.
How can I re-install lion on this computer? I do have a firewire cable, so I could do target disc mode if that's even possible.
Thanks!

DopeyBovineMan wrote:
That just isn't practical for me, to be booting off an external.
Would a flash drive work, or something to that effect?
nope, you need a external drive 1TB in size to hold all the data from the 2-500GB's and double as a backup when the RAID 0 fails which they are twice as likely to do.
you can only install OS X on a Mac, so once it's there you clone it to the 1TB, option boot from it, create the RAID and reverse clone.
no Lion Recovery, that's why you need another way to get Lion back, that's why you got to make the Lion Recovery USB first before doing anything.

Can't install OSx 10.3 on my Power Mac G5

My G5's hard drive was wiped clean, and I went out and bought OSx 10.3 Panther. I have been trying to install it on my G5 for quite some time now. Every time I boot the computer it comes up with a gray screen with the apple logo in the center. It sits like that for a minute or so then switches to a screen with a circle with a diagonal line through it. I have tried booting while holding control c, the same thing happens. I have tried booting while holding the option key. This brings up a new screen with the name of the disk on it and two arrow buttons. One seems to restart the disk, and clicking the other sends it to the screen with the circle on it.
Any ideas on what I could try to do to get it to install?

Yes, G5s can run 10.4 or 10.5
Depends which G5 you have as to whether that Disc will work, earliest G5/1.6 came with 10.2.7, last ones came with 10.4.2 & would not be able to boot/install from any 10.3 Disc.
As far as I can tell, that is the Retail version 10.3.3, & for instance the PCI-X G5s came with 10.3.4, so not likely to boot from it either.
One person with the same symptoms but an iBook, was able to boot from it after resetting the PMU...
http://hintsforums.macworld.com/archive/index.php/t-67907.html
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939

Can't install OSX 10.7 Lion on old Mac Pro...

i've got an old mac pro... i think it is 2007 or 2008 vintage... it is the 2.66mghzzz model...
it is so old it can't run OSx 10.8 and up... so I am stuck running 10.7xxx
anyway, system disk died recently...
made an OSX 10.7 install thingy on a 8gb USB drive using my new Macbook Pro...
problem is the install keeps hanging after starting the install... i've attached screenshots showing how far it gets...
i've let it sit for a few hours and no progress... i reckon it should normally finish installing of a USB stick in maybe 30 minutes or so?
is it possible that the 4tb SSHD drive i am installing onto is too big for this machine?
it has been using other 4tb drives so not sure this is an issue?
really stuck here... argh...
thanks

thanks for your reply...
yes, I realize it will only install on older macs... my Mac Pro is the 1,1 model... the 2.66mhz processor is from the 2006-2008 era....
i believe it shipped with 10.4 or 10.5 OSX...
it was previously running 10.7.5 which is the newest OSX that was allowed to be installed on it....
so it should allow 10.7 to be installed? Or do I have to start with the much older osx?
I downloaded Lion 10.7 from the mac app store and it of course wouldn't let me install it on anything, even the 4tb SSHD drive when I connected it via USB/SATA adapter to macbook pro as it is too old for running 10.7 install on this machine but I was apple to use SuperDuper app to make a boot drive of the 10.7 download form the mac app store onto a 8gb USB flash drive and make it bootable...
The 4tb SSHD drive appears to work on system as I can run disk utility and format it and mount it etc etc...
Perhaps there is something wrong with my install USB flash drive I made? I am really stuck here...
thanks for your help...

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Read
https://discussions.apple.com/message/15659267#15659267

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

just bough OSX Mountain Lion, my laptop operating with v10.6.8. Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion.

"Can't install OSX 10.4.2 on this computer"

"Can't install OSX 10.4.2 on this computer" error when trying to move up to "Tiger."

Hi,
I just purchased and received Tiger from Amazon.com via a seller that is a legit make repair biz. The disk they sent me says: Mac OS X Tiger "CPU drop in DVD" also states that the software is part of a hardware bundle. I can not install from this disk it shows up in my startup prefs as "Mac OS X upgrade DVD". Was I sold a bogus DVD? Do I have to buy another version of the install?

Can't install osx on 2009 macbook pro

Hey guys i'm haveing a nightmare getting osx reinstalled on my macbook pro, firstly i have no experance with mac's but have always wanted too so when offered this macbook pro i snapped it up even with a dead HDD thinking it to be a very easy fix, so replaced the drive with a new one and still can't install osx
anyway here's whats going on, i booted the macbook with the instalation dvd it loads up as it should but when you get to the select drive part nothing is there so googled a few things and found the drive has to be set-up first so entered disk utility to partition and format the drive but get an error with whatever i do, i have removed and reseated the HDD cable and memory and have tried booting with only one stick to see if there was an error with one of the sodimm's, i have also tried accessing the AHT but none of the ways i have found work............ please if anyone can help me, please let me know

Thanks for the reply mate, sorry to say i have tried every option in disk util i've even tied a couple of terminal commands to do the same thing with no luck, i have however been able to remove the partition but that's where the good news ends as i can't create a new one..... is there anyway to prep the disk in windows? as i don't have an external case or another mac?
also what are the chances of the HDD cable being at fault? after more googeling i found someone with the same sort of problem's as me and he ended up replacing the cable http://www.mac-forums.com/forums/apple-notebooks/237964-cant-partition-brand-new -hard-drive.html unfortunatly i don't have an apple store anywhere near me so thats not an option but it's something i could do myself, the only problem is i don't have the £18 for a new one right now as i've had to buy a HDD and charger as well as the macbook and it's left me a little skint lol

Can I install osx leopard 10.5.6 on a 2012 mini to run cs2?

can I install osx leopard 10.5.6 on a 2012 mini to run cs2?

is there any way that I can run Adobe Creative Suite 2 on a 2012 mac mini?

I've a macbook black middle 2007, can i install osx mountain lion?

I've a macbook black middle 2007, can i install osx mountain lion?

I'm afraid not > Apple - Upgrade your Mac to OS X Mountain Lion.
Must be a MacBook (Late 2008 Aluminum, or Early 2009 or newer)

I bought an iTunes Card but i can't install OSX Lion from Mac App Store why?

I bought a 25 euros iTunes Card but I can't install OSX Lion why? Could you help me and show me all the passages to downlad lion? please..

Do software update,then go mac app store and sign with your apple id,you need redeem your itunes card so click redeem and enter the code.
Then click buy and after enter your password it shall start download.What's the problem?

Can I install osx 10.6 on iMac6,1, Intel Core 2 Duo, 1GB Ram

For Thisconfiguration of imac
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version: 1.10f2
Serial Number: W86386XAVGN
Can I Install osx 10.6 if yes How?. I tried using my New imac's Install DVD 10.6.2, it say this version of osx cannot be installed on this mac
please tell which version of OSX 10.6 can be install in the above imac

First please don't post your serial number in a public. You should be able to install Mac OS X 10.6 on your system. The DVD you are using must be the original that came with the computer before it will work. What version of Mac OS X do you have on your system. I am thinking it is a higher version then 10.6.2.

Can I install OSX lion on a MacBook 4.1?

Can I install OSX lion on a MacBook 4.1? I'm trying to install iCloud on this computer and I need to install OSX (10.7.4) or higher. I don't see OSX (7) available in the store.

mqanderson wrote:
Can I install OSX lion on a MacBook 4.1?
Yes. Lion is not offered in the App Store, so you must phone Apple on the number shown in the Apple Online Store.
Explain that you want to purchase Lion for your MacBook4,1.
After Apple collects their fee ($20 + tax) they will send you a download code in an encrypted PDF document, and in another email supply the key to unencrypt the PDF.
"Redeem" the code in the App Store to purchase Lion.
Make sure you have enough memory; your Mac can address a maximum 6 GB. Lion's minimum requirement is 2 GB but I recommend at least 4 GB. More is better.

Can you install osx lion with thumb drive from 10.6.3

can you install osx lion with thumb drive from 10.6.3

No. You can install Snow Leopard with a flash drive 10.6.3 installer. However, for Lion you must start with 10.6.8 in order to access the App Store to purchase and download Lion.

How can i install osx now ?

I clean my disk totally by disk utility and now nothing comes up when holding option key. After a while this text comes with a black background, "No Bootable Device -- insert boot disk and press any key".
I think I erase everything, even boot settings!!!
Now, How can i install OSX now on my iMac?

What is the exact iMac model you have, please? If your model can run Snow Leopard then you need to install Snow Leopard from your installer discs. Snow Leopard must then be upgraded to 10.6.8 so you can upgrade to the version of OS X you had installed from the App Store.

Can't install OSX on Seagate Barracuda 1TB in Mac Pro1,1. Any ideas?

Similar Messages

Maybe you are looking for