Can't install OSX

Hello, this is my first time here. My problem is this. I was given a Dual 1 Ghz MDD FIrewire 400 with 2x 512 MB PC2700 memory modules and Radeon 9000. There were no original system installer CDs. When I tried to install a retail copy of OS X (10.4), It boots up, can format the hardrive BUT during the install process, it will stop midway and it will show a warning that OS X can't be installed. The installer seems to be looking at something that it can't find. The OS X install DVD is working, in fact I tried it in my old iBook G3. My friend also tried it in his Powermac MDD FW800. Is it a logicboard or CPU problem? Thank you!
Greetings from Japan,
amy
Message was edited by: amy-amy

Hello amy and welcome!
...retail copy of OS X (10.4)....
The fact that it works on other Macs of different model types certainly suggests that he disks are "righteous" retail disks.
Did you select "Mac Extended (HFS+) Journalled" when you formatted the hard drive? The HFS+ part is mandatory; journalling can be turned on later I think.
Allan

Similar Messages

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Read
https://discussions.apple.com/message/15659267#15659267

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

just bough OSX Mountain Lion, my laptop operating with v10.6.8. Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion.

"Can't install OSX 10.4.2 on this computer"

"Can't install OSX 10.4.2 on this computer" error when trying to move up to "Tiger."

Hi,
I just purchased and received Tiger from Amazon.com via a seller that is a legit make repair biz. The disk they sent me says: Mac OS X Tiger "CPU drop in DVD" also states that the software is part of a hardware bundle. I can not install from this disk it shows up in my startup prefs as "Mac OS X upgrade DVD". Was I sold a bogus DVD? Do I have to buy another version of the install?

Can't install osx on 2009 macbook pro

Hey guys i'm haveing a nightmare getting osx reinstalled on my macbook pro, firstly i have no experance with mac's but have always wanted too so when offered this macbook pro i snapped it up even with a dead HDD thinking it to be a very easy fix, so replaced the drive with a new one and still can't install osx
anyway here's whats going on, i booted the macbook with the instalation dvd it loads up as it should but when you get to the select drive part nothing is there so googled a few things and found the drive has to be set-up first so entered disk utility to partition and format the drive but get an error with whatever i do, i have removed and reseated the HDD cable and memory and have tried booting with only one stick to see if there was an error with one of the sodimm's, i have also tried accessing the AHT but none of the ways i have found work............ please if anyone can help me, please let me know

Thanks for the reply mate, sorry to say i have tried every option in disk util i've even tied a couple of terminal commands to do the same thing with no luck, i have however been able to remove the partition but that's where the good news ends as i can't create a new one..... is there anyway to prep the disk in windows? as i don't have an external case or another mac?
also what are the chances of the HDD cable being at fault? after more googeling i found someone with the same sort of problem's as me and he ended up replacing the cable http://www.mac-forums.com/forums/apple-notebooks/237964-cant-partition-brand-new -hard-drive.html unfortunatly i don't have an apple store anywhere near me so thats not an option but it's something i could do myself, the only problem is i don't have the £18 for a new one right now as i've had to buy a HDD and charger as well as the macbook and it's left me a little skint lol

Can I install osx leopard 10.5.6 on a 2012 mini to run cs2?

can I install osx leopard 10.5.6 on a 2012 mini to run cs2?

is there any way that I can run Adobe Creative Suite 2 on a 2012 mac mini?

I've a macbook black middle 2007, can i install osx mountain lion?

I've a macbook black middle 2007, can i install osx mountain lion?

I'm afraid not > Apple - Upgrade your Mac to OS X Mountain Lion.
Must be a MacBook (Late 2008 Aluminum, or Early 2009 or newer)

I bought an iTunes Card but i can't install OSX Lion from Mac App Store why?

I bought a 25 euros iTunes Card but I can't install OSX Lion why? Could you help me and show me all the passages to downlad lion? please..

Do software update,then go mac app store and sign with your apple id,you need redeem your itunes card so click redeem and enter the code.
Then click buy and after enter your password it shall start download.What's the problem?

Can I install osx 10.6 on iMac6,1, Intel Core 2 Duo, 1GB Ram

For Thisconfiguration of imac
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version: 1.10f2
Serial Number: W86386XAVGN
Can I Install osx 10.6 if yes How?. I tried using my New imac's Install DVD 10.6.2, it say this version of osx cannot be installed on this mac
please tell which version of OSX 10.6 can be install in the above imac

First please don't post your serial number in a public. You should be able to install Mac OS X 10.6 on your system. The DVD you are using must be the original that came with the computer before it will work. What version of Mac OS X do you have on your system. I am thinking it is a higher version then 10.6.2.

Can I install OSX lion on a MacBook 4.1?

Can I install OSX lion on a MacBook 4.1? I'm trying to install iCloud on this computer and I need to install OSX (10.7.4) or higher. I don't see OSX (7) available in the store.

mqanderson wrote:
Can I install OSX lion on a MacBook 4.1?
Yes. Lion is not offered in the App Store, so you must phone Apple on the number shown in the Apple Online Store.
Explain that you want to purchase Lion for your MacBook4,1.
After Apple collects their fee ($20 + tax) they will send you a download code in an encrypted PDF document, and in another email supply the key to unencrypt the PDF.
"Redeem" the code in the App Store to purchase Lion.
Make sure you have enough memory; your Mac can address a maximum 6 GB. Lion's minimum requirement is 2 GB but I recommend at least 4 GB. More is better.

Can you install osx lion with thumb drive from 10.6.3

can you install osx lion with thumb drive from 10.6.3

No. You can install Snow Leopard with a flash drive 10.6.3 installer. However, for Lion you must start with 10.6.8 in order to access the App Store to purchase and download Lion.

How can i install osx now ?

I clean my disk totally by disk utility and now nothing comes up when holding option key. After a while this text comes with a black background, "No Bootable Device -- insert boot disk and press any key".
I think I erase everything, even boot settings!!!
Now, How can i install OSX now on my iMac?

What is the exact iMac model you have, please? If your model can run Snow Leopard then you need to install Snow Leopard from your installer discs. Snow Leopard must then be upgraded to 10.6.8 so you can upgrade to the version of OS X you had installed from the App Store.

Can't install OSX on firewire drive?!?

I have a brand new Mac Mini (specs below) and just purchased an OWC Ministack v2 for extra USB and Firewire ports, with a Hitachi 250GB drive in it.
It's in 1394 mode, hooked up to the Mini, which recognizes it as a firewire drive. I'm able to copy files to it and open them fine, drive passes all tests.
When I insert the Install Disc 1 that came with the Mac Mini, I run the installer, which boots up from the disc and askes for the destination. It sees the firewire drive, but says that I cannot install OSX on that volume.
My question is, does the installer only allow you to install OSX on the Mini drive itself?!? Or is there something wrong with my drive? Anything I can do to get around this?
I have a separate Tiger install CD, but the Mini can't run the installer (presumably because it's pre-Universal Binary?).
THANKS a ton for your feedback, much appreciated.

Aye that was certainly the reason behind the problems I recently had when I was setting up an external drive with my Intel MacBook Pro.
After much testing and a little searching via Google, it would seem that Disk Utility was formatting the drive as an Apple Partition Map (APM) partition rather than a GUID Partition Table (GPT) that is necessary to use an external drive as a startup drive for an Intel Mac.
iFelix

Replaced hard drive can't install OSX

A friend gave me an iBook G3 500 MgHz. I want it to coordinate with my iMac G5 to be able to use same Tiger software. I put in 640 MB of Ram, then installed OSX 10.4. Everything OK but the modem was broke and there was not much room on HD. So I bought new 80Gig Toshiba HD and new modem, did the surgery using excellent iFixit instructions and went to reinstall OSX from my cds. The computer works if I start it with OSX installer cd, and the disk utility and System Profiler show the hard drive properly,
BUT WHEN I START THE INSTALLER THE HARD DRIVE DOESN'T SHOW UP AS THE DESTINATION DRIVE,NOTHING SHOWS UP AS A POSSIBLE DESTINATION DRIVE.
DID I MISS A MAJOR STEP TO PREPARE THE COMPUTER FOR A NEW HD? IS THERE SOMETHING I CAN DO WITH DISK UTILITY TO MAKE IT SHOW UP?
HELP

Hi, and welcome to Apple Discussions.
In a Mac, it's called Open Firmware, and you get there by holding down the Command (Apple) Key + Option + o + f.
If it's a G4 (and it sounds like it is because the G3's have tray-loading optical drives), you may want to try posting in the iBook G4 Forum.
You have posted in the iBook G3 (Dual USB) Forum.
Also, an iBook G4 will not have version OS X 10.1.x (that version of the operating system is too old for an iBook G4), so you may want to check that information.

Big trouble: Tried to do 2 partitions now I can't install OSX.

I had this happen once before on my G5 and it was fixed by rebooting and trying again. Not this time.
I wanted 2 partitions on my new MacBook so I decided to reinstall before I got a whole lot of software on it.
After making both partitions Mac OS Extended (Journaled) and clicking partition I tried to finish setup but both partitions say they can't have OSX installed on them!
I restarted, booted to the CD again, repartitioned back to a single Partition, same problem.
Next I repartitioned again and tried to Zero out the disk, (getting desparate at this point) 45min later. No luck!
HELP!

The problem is the type of partition that you have created.
You are going to need to repartition the disk again. To do this boot from your OS X disk and use disk utility (it is under the "Utilities" menu (i think there is a menu with disk utility for sure.)
Once you have Disk Utility Running go into the partition menu and select options. You need to use the GUID Parition Table to allow you to install OS X on an Intel map. After that then repartition and you should be able to install.

How can I install OSX into a new hard drive without a CD?

I just installed a new hard drive and I don't have a installation CD/DVD to install OSX. How can I go about install a fresh copy?

Are you able to beg or borrow access to another Mac that has access to the internet & is new enough to use the App store?
You can sign in to your App store account & download the appropriate installer (Mavericks or whatever you have in your account). Then you can make a USB bootable copy of the installer (there are many other guides around)…
http://osxdaily.com/2011/07/08/make-a-bootable-mac-os-x-10-7-lion-installer-from -a-usb-flash-drive/
If you can access a Mac but don't want to do the huge download you can use the recovery assistant to create a bootable recovery partition on a USB stick.
https://support.apple.com/kb/DL1433
When you boot your Mac it will download the OS for installation.
Does the original HD still work? It may be quicker to get a cheap 2.5inch case & boot from that just to get an OS downloaded & installed. It will mean you are not wasting cash & time on 10.6 that is only needed for one App store download.
I'd consider a trip to an Apple store if you have one local, they may drop an installer or recovery partition onto a memory stick for you.

Can't install OSX

Similar Messages

Maybe you are looking for