Can't install patch to WinProducer

I have tried installing the patch to WinProducer 2, but I always get an error message, which I can't access now, but I think it was something like, "WinProducer invalid version, upgrade failed," which happens after the patch installation appeared to go OK.
Why won't the winproducer patch work? I have all the latest capture and VGA drivers.
. I am running:
athlon 2400
asus a7n8x deluxe (latest drivers downloaded)
corsair 512mb xms llpt (one chip)
seagate barracude 120gb HD with 8mg cache
mitusmi 16x dvdrom
nec 52x24 cdrw
MSI FX5600-VTDR128
Thanks,
Alan

If you are using the MSI version of WinProducer then you are using an OEM version. The patch is probably for the full retail version. It will not work with an OEM vesrion unless the patch is supplied by the OEM version owner it this case MSI.

Similar Messages

Can I install patches from SAP site?

Dear Friends,
I understand that i need some patches are required for my frountend GUI 6.2 for Business Explore and WAD. Somehow the basis support is not good over here.
1) Is there any place, or better way of searching and how to install them on my PC.. I have got my own OSS id, will this be sufficient?
2) Some training software for new Netweavers 2004s BI are available? is this true if so how to download them?
thanks for your time.
regards,
hari

Hi Hari,
Yes. You can download and install the frontend patches. The one thing you need to be careful is that any query you open with the latest patch would not open on any PC with lower patch level.
You can download the patch using your OSS account. The link is:
http://service.sap.com/swdc -> Entry by Application Group -> SAP Netweaver -> ......
Bye
Dinesh

Can't install patches 8.0.1 and 8.0.2 for robohelp 8

I installed Robohelp 8 on an XP workstation and now trying to install (update) patches 8.0.1 and 8.0.2. No errors, they just don't install. Has somebody else encountered this issue?

I asked as I have seen discrepancies but that looks OK.
Has the machine been rebooted since installing RoboHelp?
Is this a first time install of RoboHelp? If not I wonder if there is something old in the registry causing a problem. You could try uninstalling with RevoUninstaller and then reinstalling. Use the Advanced setting in RevoUninstaller but only if you are happy using such programs, otherwise involve IT.
I don't know what else to suggest apart from contacting Tech Support as an installation issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Can't load patch using t-code SPAM .!!??

Hello Gurus,
When i use T-code SPAM to install patch and go to menu
Support Package>Load Packages>From front end. I see the menu as disabled.
In this case how can i install patch???
Thanks and Regards,
Rahul

Hi Rahul,
Dont use sap* or ddic users just create a admin user with the profiles sap_all,sap_new then login to the client 000 using this user,Prior uploading this you have to uncar the support package files,just uncar them using sapcar -xvf xxx.car
then try uploading them using the spam this time you just select upload from application server.Might be the support package would be greater than 10MB so you can not upload it from frontend.Hope this helps.
Reward points if helpfull.
Regards,
Vamshi.

My Earth and Beyond game ran with XP, can't install or run it on 8.1... need patch or driver ???

I have an older PC with XP, my game Earth & Beyond ran fine... this new PC with 8.1 can't install an run. There must be a service pack or patch or driver....

mckaysr wrote:
I have an older PC with XP, my game Earth & Beyond ran fine... this new PC with 8.1 can't install an run. There must be a service pack or patch or driver....
You found and hit the limitation of old software are unable to install on newer O/S. This is software limitation nothing Win8 can do to help you install a XP game or Program on Win8.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Can i install 10.2.0.4 patch set 14 on my client when SERVER is at 10.2.0.4

======================================================
Can i install 10.2.0.4 patch set 14 on my client when SERVER is at 10.2.0.4 patchset 5?
======================================================
We have a customer with DB on windows-2003 64 bit with following homes.
At Server version:-
DB version is 10.2.0.4 patchset 5,
client1 is at 10.2.0.1.(patchset i am not sure)
Client2 is at 10.2.0.4 patchset 5.
Customer running some sqls which are taking more time from CLIENT2(10.2.0.4 patchset5) than CLIENT1(10.2.0.1). offcourse both CLIENTS connecting
same DB. we identified a bug(6350579). This bug was resolved in 10.2.0.4 patch 14(7677781).
Now my question is Can i apply this patch only at client side with out applying at DB level?
I mean i will create one more new client called CLINET3 (with 10.2.0.4 and i will install 10.2.0.4 patchset14) and then run the SQLs from new client CLIENT3. is this supported method or not?
Reason being customer does not want to install 10.2.0.4 patchset14 at DB since Customer is happy with DB performance.
We are getting problem only when we connect to DB from cleint 10.2.0.4 patchset5. if we connect to DB from Client 10.2.0.1, SQL performance is very good.
Please advise me on this.
Regards
Nagendra.

You can upgrade your client with the latest patchset/bug fix (if you have tested it on some other machine and found that your issue has been resolved) but be prepared to handle any unusual errors that might arise due to this combination.
Personally, I never prefer having a client running at a higher version than the server but there are some situations where we need to and we need to make sure that, even though Oracle must have tested certain scenarios, we do not run into errors. So test, test and test before changing anything in production.
Edited by: Satish Kandi on Feb 9, 2009 6:26 PM
Revised a bit.

How can I check the installed patches ?

Hi,
I am using WLS 10.3.2.0 and I need to check the installed patches. What will be the easiest/reliable way to do it ? I can access the console and file system.
Thanks

I was referring to the server log files, named <ServerName>.log, which is located in the directory as you pointed out.
D:\Oracle\11gFusion\user_projects\domains\MyDomain\servers\AdminServer\logs\AdminServer.log
D:\Oracle\11gFusion\user_projects\domains\MyDomain\servers\MyServer\logs\MyServer.log
Please look for log message with messageID, BEA-141107. Search/grep BEA-141107 in your log files.
This log message is generated within the first 10 log messages when the server is started/restarted. If no patches are applied, it will look as below:
<Apr 12, 2012 10:56:38 AM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
If your log file is rotated, then you might find this in one of the rotated log files (AdminServer.log00001).
The idea is to check this message during startup to understand if a patch is picked up by the server or not.
As far as I understand, OPatch can not be used to patch Oracle WebLogic Server.
http://docs.oracle.com/cd/E15586_01/doc.1111/e16793/opatch.htm#CBHCHIDH
You might be applying a patch to one of the overlaying products (FMW) like SOA, WebCenter that run on top of WebLogic Server.
OPatch and BSU are two different tools to apply patches, so BSU can not list the patches applied through OPatch and similarly OPatch will not be able to list the patches applied through BSU.
Regarding using BSU to apply patches: (check the second point about the zip file. We can not directly use the zip file)
If you have access to My Oracle Support (MOS), you can find detailed instructions with examples in KM note ID: 876004.1
Here are the same steps for your reference:
1. Download the patch from My Oracle Support (MOS). For more details, please refer to Master Note: How to Locate and Download Patches for WebLogic Server Using My Oracle Support Note 1302053.1.
2. Extract the contents from the zip file: you will have a jar file and patch-catalog_xxx.xml. A readme file may also be included.
NOTE: If you do not see a <patchID>.jar in the downloaded zip file, it is very likely that it is not a WebLogic Server patch.
3. Copy the files (for example, W6PT.jar) and the patch-catalog_xxx.xml from the zip file to the target machine. You do not need the readme file. Copy the files to the appropriate cache_dir directory for the target system: for example, $MIDDLEWARE_HOME/utils/bsu/cache_dir.
4. Run the $MIDDLEWARE_HOME/utils/bsu/bsu.sh script as shown in the below example to apply the patch
SYNTAX:
./bsu.sh -prod_dir=$WEBLOGIC_HOME -patchlist=<patchID> -verbose -install
FOR EXAMPLE:
./bsu.sh -prod_dir=/opt/oracle/wlserver_10.3 -patchlist=W6PT -verbose -install
If you want an example to test for WLS10.3.2, please use patchNumber 9456759 to test.
Arun

How can check which patch install in oracle 10g

hi experts,
i have use oracle 10g , i hv patch information but how can check which patch install ?

Run following command , it will give you list of patches installed on Oracle Home
cd ORACLE_HOME/OPatch
opatch lsinventory
For patchset and CPU patch , check/query DBA_REGISTRY_HISTORY
Virag

Can't install cc-patches after upgrading to windows 8.1

Hi Adobe-Team,
after upgrading to windows 8.1. I can't install updates and patches of the creative cload programms. I'm able to uninstall programms. I'm able to install programms, but i cant't patche them. Got this message: "Installation erfolgreiche, aber Fehler beim Patch (U44M1I210). I've no idea what to try further more.
Thanks for your help
Andreas

Hi Andreas,
Error Code: U44M1I210 means failed to extract the downloaded ZIP file of update.
Please follow the instructions specified on following kb doc and see if it helps -
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
Let us know if it does not solve your problem.
Regards,

Convergence Patch 145711-06 can't install - missing saveState

Currently running:
Convergence 2-4.01
Went to apply patch 145711-06 and it is failing as shown below:
Checking installed patches...
Executing prepatch script...
-- The patch requires the saveState file from a previous install
-- You can find this file under your factory config area
-- This will typically be in one of the following areas:
-- /u5app/opt/sun/comms/iwc/data/setup/Iwc-config_YYYYMMDDHHMMSS/
-- /u5app/opt/sun/comms/iwc/install/Iwc-config_YYYYMMDDHHMMSS/
-- Please make sure a copy is there and apply the patch again
The prepatch script exited with return code 1.
Patchadd is terminating.
I checked and I don't have a saveState file anywhere under my <iwc_base> directory. Is there a way I can recreate a saveState file so I can apply this patch? Or any other suggestions?

You may redo a init-config. Then a saveState file should be created. What I am wondering is, why there has not been created one in your initial init-config.
When doing it, be shure to have a file with all your config changes, which you can replay after reinitialization.

Can't install 620 patch

Hi all!!!
When I start the file to install patch i have an error:
Error occured while opening the XML document "c:\documents and settings\...\sappatch.xml" Document not found, line 0.
I've check this file - it exists!
Can't solve this problem, help pls!!!!

This is how I was able to successfully install the Lenovo Patch Utility:
1) Enable if necessary and log into the built-in Administrator account.
2) Run System Update. Download and install the Lenovo Patch Utility (unsure if this is a necessary step,)
3) At this point, the Lenovo Patch Utility is not installed. The previous version of the Lenovo Patch Utility will display in Programs and Features.
4) Run System Update under an administrator account. Download and install the Lenovo Patch Utility (I ran this under a user-created Administrator account; unsure if works under built-in Administrator account..) Lenovo Patch Utility will no longer appear in Programs and Features. This indicates it has been succesfully installed.
5) Disable built-in Administrator account if desired for security reasons.

IMac G3 ? How can I install BSD darwin PPC 8.0.1 ?

I've got an old used 2nd hand or 3rd hand malfunctioning iMac,
No CD was delivered, only hardware, mouse and keyboard,
I think it is ok, but I never seen it started or running,
it is supposed to be impossible to log in,
because one of the prior users
==> "has forgotten the password".
It is this computer model
http://en.wikipedia.org/wiki/IMac_G3
At least this one looks exactly equal to mine.
Computer Model
imac
serial # YM0*****J74
Eternet ID
00 30 65 84 E0 16
350 MHz / 512 K / L2 64 MB / 6 GB / 24 CD / 56k
well the hard disk inside displays on attempt to install linux for PowerPC approx 40 GB.
I don't know if that has been replaced,
my family Number M5521
supplied handbook,
mac OSX 10.2
I have downloaded darwin BSD PPC 8.0.1
which matches Mac OSX 10.4
On attempt to install I saw some kernel panic.
I did try with OpenBSD and I did see
something like
#: type name length base ( size )
1: Applepartitionmap Apple 63 @ 1
2: Apple_Driver43*Macintosh 54 @ 64
3: Apple_Driver43*Macintosh 74 @ 118
4: AppleDriverATA*Macintosh 54 @ 192
5: AppleDriverATA*Macintosh 74 @ 246
6: Apple_FWDriver Macintosh 200 @ 320
7: AppleDriverIOKit Macintosh 512 @ 520
8: Apple_Patches Patch Partition 512 @ 1032
9: Apple_HFS untitled 2142310 @ 1544 ( 1.0G)
10: Apple_HFS untitled 2 4120589 @ 2143854 ( 2.0G)
11: Unused untitled 3 6330517 @ 6264443 ( 3.0G)
But on attempt to install darwin BSD PPC 8.0.1
It started, then it hang, froze,
and after several attempts I could read
kernel panic.
Can I install darwin or mac osx without the original CDs?
Can I boot from usb memory stick ?
I know how to use the 'c' key to boot from CD-ROM.
I don't know if DVDs are supported,
Can I connect an external USB DVD reader ?
How can i boot darwin from a USB memory stick?
Do i need to create a certain partition scheme
How do I create it ?
fdisk is known,
pdisk is still new to me.
Can I also compile and install the latest version of darwin or mac osx?
I'd like to get one of these installed
and I know how to use a c compiler.
http://www.opensource.apple.com/darwinsource/
Which one will fit on the hardware given?
Please ?
<Edited by Moderator>

"has forgotten the password"
From the information supplied, I'd guess that the machine has been loaded with OS X 10.2 (Jaguar). You need the 10.2 installation disc to reset the password.
It is not wise to buy any Mac without all the original installation discs, and any discs required for a later OS which may have been installed.
It won't boot from a USB stick or USB drive. It may be possible to boot from a firewire external drive running OS X 10.2 or later, or in firewire target mode from another OS X Mac. It won't boot from an external DVD drive.
That model originally shipped with OS9 and either OS X 10.0 or 10.1 (neither of which was worth installing).
<350 MHz / 512 K / L2 64 MB / 6 GB / 24 CD / 56k>
Presumably this is the specification printed on the underside of the casing, in which case 6GB is the original HD size. The model did later ship with up to 40GB however, and it's certainly possible that it may have been replaced.
One caveat; some 6GB models could only be booted from a 6GB or smaller partition, so any upgrade would have to be partitioned accordingly.
If you get hold of a retail OS X disc 10.2 or later (but not 10.5), BSD is available from the installer as an optional installation (with the main OS). It's unlikely the previous owner would have installed it however.
Can't help you much further than that I'm afraid, but I'm sure there'll be another bus along in a minute
Message was edited by: noondaywitch

Install patch in obiee 11g

Anyone tell me how to install patch in obiee 11g.
Basically this is the first time i need to install it in obiee 11g.
anyone please explain me clearly? how to install patch to windows server 32 bit env.

Thanks Kalyan for sent me the document and gave me the clarification
I have followed way it is in the document. But I have made it till step5 only.
Later if I type opatch command on the dos prompt it is throwing error that 'is not recognized as an internal or external command,operable program or batch file'
In my server is structure like this.....
Obiee installed in E drive
It has subfolder like 'mw_home'
Under that folder I have instances, jdk116_18,jrockit....,logs,modules,oracle_bi1,oracle_common,user_projects,utils,wlserver.
Under oracle_bi1 I have admin,asoneofftool,assistants,atgpf,.....
Under oracle_common I have admin,admin server registration,bc4j .....
Can anybody give the exact commands which are applicable for my server.... from importing zip from the oracle site and where I will have to place and where I will have to install... Anybody give me all the commands to get my patch install?
can you tell me my steps will going to impact anything further? if i stop it in the middle..
Thanks in advance
Edited by: user12077461 on May 16, 2011 8:10 PM

Can i install Oracle ADF Essentials 11.1.2.3 on weblogic 10.6 ?

can i install Oracle ADF Essentials 11.1.2.3 on weblogic 10.6 ?
what the difference between ADF Essentials 11.1.2.3 and Application Development Run time 11.1.1.6 ?
can i use ADF Essentials 11.1.2.3 instead of Application Development Run time 11.1.1.6 to deploy application (contains many jsf pages with rich faces and many taskflows and BC4J) ??
i'm using jdeveloper 11.1.2.3.0 and weblogic 10.6 installed on the Linux server

Hi,
JDeveloper 11g R1 (11.2.3) supported as ADF essentials and running on WebLogic 10.3.6 are the same releases. The difference is that a path is needed if you want to deploy the software on WLS 10.3.6. Quoting the release notes:
+"The ADF Runtime will be installed into a standalone application server by applying an Opatch bundle on top of a 11.1.1.6 version of the Application Developer Runtime environment. In the event that additional patches are needed or desired in addition to the 11.1.2.3.0 patch (for example, if an additional patch is needed for another component in the Application Development Runtime installation), those patches will need to be installed separately.+
+Important note: The patch is intended to be applied to an Application Developer Runtime installation. Applying the patch to a different installation type (for example, Oracle SOA Suite or Oracle WebCenter) is not supported."+
Release Notes: http://www.oracle.com/technetwork/developer-tools/jdev/11gr2update3-1851251.html
For Glasssfish you don't need to patch the server and only install the ADF runtime libraries - also explained in the Release notes.
Frank

Can't install Acrobat 8.1.2 on Leopard

Hi,
I can't use Acrobat 8 with Leopard and in an attempt to fix the problem I can't install the fix patch. When it asks for an application then the Distiller and Acrobat Pro applications are 'greyed out'
Please Help!!
Chris

I hope everyone realizes that Aandi is trying to be humouros. ;-)
In word2004 you click on the little PDF Maker icon and it will works but it takes forever and two days to work.
Heres the squence of events.
File checked for errors
Documents converted to PS File.
File checked for errors
If error found a retry and error check performed again, up to 3 times.
File Converted to PDF
File checked for Errors
If errors found, retried and rechecked up to 3 more times.
If File is okay File is actually written to ahrd Drive.
same check and recheck sequence
If everything Okay hidden .ps file is trashed.
PDFMaker quits.
Word2008
PDFMaker does not work, it is written using VBA. VBA has been completely stripped from Office 2008.
To create a PDF. do as follows.
save document as Doc or DocX file.
Then go to Save As... and look for save as PDF.
Word Document is directly converted from Word Format to PDF on a file that amounts to 108K Pdf takes about 10 seconds or less. Same file size using Office 2004 using PDFMaker about 3 minutes or more.

Can't install patch to WinProducer

Similar Messages

Maybe you are looking for