Can't Install Powe Pivot

Hello,
I have Office 2010,32 bit, Standard Version and I need to install Power Pivot for Excel 2010. I have tried to install de 32 bit version (SQL Server 2008), but it says that I need to install Office Shared Features and Excel 2010, which are already installed.
I have tried with other versions of Power Pivot, but I can't neither. I have also installed Visual Studio Tools for Office Runtime (also 32 bit), but I still can't install Powe Pivot, for SQL Server 2012 version.
Even more, I've been searching the solution in this forum, with persons that have the same problem as me, and when I try to implement the solution, it doesn't result.
Please help me to solve this problem.

Hi,
In regarding of the issue, please provide us more information to assist you better.
DO you mind telling us your Hardware/Software information?
Where did you download the Power Pivot for Excel 2010?
Would you like to share us the whole error message?
Based on the information that you mentioned above, we need to use the 32bit "Microsoft SQL Server 2008 R2 - PowerPivot for Microsoft Excel 2010 - RTM" with 32bit Excel
2010. We could see the information in "Install Instruction", I copied here:
>>Important : If you choose a custom installation of the Microsoft Office 2010, you must install both Excel 2010 and Office Shared Features in order to use PowerPivot for Excel.<< Please go to control panel to check Office Shared
Features is enabled:
Then, if you did meet the Prerequisites, then delete the power pivot and re-download it and follow the steps in the link and video:
http://msdn.microsoft.com/en-us/library/gg413462(v=sql.105).aspx
http://technet.microsoft.com/en-us/sqlserver/dn151340.aspx
Tips:
Please installed the prodcut release by runnuing the CMD line as admin.
Similar issue:
https://social.technet.microsoft.com/Forums/en-US/451eef18-5bf2-44bd-90e3-5507a9e834f2/installing-power-pivot?forum=sqlkjpowerpivotforexcel
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
Office programs.

Similar Messages

How I can change a power pivot without change the power charts that are suing that power pivot as source?

Hi All
My issues using an Example,
I've a power pivot with 3 related tables, (two dimension tables and one measure table), then I created a pivot chart using
that 3 tables as source...
The pivot chart is a little complex... it takes some time to rebuild from the scratch... I have added 3 measures to the chart,
M1, M2, M3... but due to a business changes I need to refresh the measures M1, M2, M3 with information from a different source...
i.e. I need to drop the 3 measures from the Power Pivot, then I need to add them again with the same names, but when I drop
them from the power pivot table the pivot Chart Fields Values disappear and the chart obviously is refreshed without the 3 measures... :S
Question: How can I drop a column from a power pivot table, then add it again with the same name without affect the Pivot
Chart Fields... i.e. only when I do the refresh manually the charts are affected... but once the name of the columns are the same.. the charts don't change the layout....
Thanks Very Much!!!
Luis

Luis,
Any luck with this?
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

How can I install Power PC designed application in Intel Mac Machine?

I tried to install an application which was written for the old Power PC Mac Machine in my new Intel Mac Machine. The system released a message that Power PC application is no longer supported. How can I install the old Power PC program? Thanks for your help.
Ronald

You can't.
Lion does not support ANY software written for a PPC Mac.
Time to update the software!

Can't save power pivot report back to power pivot gallery...file is read only

Hi eb
I have developed an excel pivot report in a power pivot gallery (all in 2013).
Next time i open that report from the power pivot gallery and attempt to save it again to the gallery
I am blocked with a msg: we cant save http://........./powerpivot gallery/myPwerPvt.xslx file is read only.
To keep your changes you'll need to save the woorkbook with a new name or different location.
Please help!
TIA
Rea

Hi Rea,
When you try to edit the PowerPivot workbook, are you open it as read-only mode? Please see the screenshot below:
The "Read Only" mode will not be able to save any changes to the workbook you are loading.
In addition, is it work for you while you save the PowerPivot workbook with a new name?
Regards,
Elvis Long
TechNet Community Support

Power Pivot SharePoint 2010 uninstallations left over entries in config DB .can we delete them? How to delete Power Pivot left over objects in DB?

Name Status Version Properties
MSOLAP$POWERPIVOT 0 0x000000000021CF50 <object type="Microsoft.AnalysisServices.SharePoint.Integration.EngineServiceProxy, Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"><fld name="m_Versions" type="null" /><fld name="m_UpgradeContext" type="null" /><fld type="System.Collections.Hashtable, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" name="m_UpgradedPersistedFields" /><fld name="m_Properties" type="null" /><sFld type="String" name="m_LastUpdatedUser">Domain\USername</sFld><sFld type="String" name="m_LastUpdatedProcess">PSCONFIG (11884)</sFld><sFld type="String" name="m_LastUpdatedMachine">ServerName</sFld><sFld type="DateTime" name="m_LastUpdatedTime">2014-02-21T17:39:25</sFld></object>
PowerPivotServiceApplication1_c17206969d204609ac63fe5fb1e84d77 0 0x000000000021D09B <object type="Microsoft.AnalysisServices.SharePoint.Integration.GeminiServiceDatabase, Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"><fld name="m_Username" type="null" /><fld name="m_Password" type="null" /><fld name="m_FailoverServiceInstance" type="null" /><fld name="m_Snapshots" type="null" /><sFld type="Boolean" name="m_MultiSubnetFailover">False</sFld><fld name="m_Versions" type="null" /><fld name="m_UpgradeContext" type="null" /><fld type="System.Collections.Hashtable, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" name="m_UpgradedPersistedFields" /><fld name="m_Properties" type="null" /><sFld type="String" name="m_LastUpdatedUser">Domain\USername</sFld><sFld type="String" name="m_LastUpdatedProcess">w3wp (992)</sFld><sFld type="String" name="m_LastUpdatedMachine">ServerName</sFld><sFld type="DateTime" name="m_LastUpdatedTime">2014-02-21T17:58:21</sFld></object>
I am having issues with power pivot uninstallation. These two objects are left over after uninstallation.
How to deal with it?
Is there any way to delete these entries in the config DB?
As i Know we should not delete anything manullay from config Database?
Is there any powershell script or stsdam comand to delete these entries from the config database and re install power pivot for sharePOoint
Ravi

Hi Trevor,
I have Reviewed uls logs.. It shows follwoing messages.
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='Domain\USername',
UPN='UserName@domain'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.Security.SecurityAccessDeniedException: Access is denied. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String upn, Int32 pid)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)
at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity().
Error 2:
MossHost.TryGetWindowsIdentity: Failed to get WindowsIdentity from IClaimsIdentity. SPSecurityContext.GetWindowsIdentity() threw exception: System.InvalidOperationException: Could not retrieve a valid Windows identity. ---> System.ServiceModel.Security.SecurityAccessDeniedException:
Access is denied. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String upn, Int32 pid)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)
at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity() -
-- End of inner exception stack trace ---
at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity()
at Microsoft.Office.Excel.Server.MossHost.MossHost.<>c__DisplayClass8.<TryGetWindowsIdentity>b__6()
Error 3:
CredentialsProvider.GetCredentials: Failed to get WindowsIdentity.
Credential delegation failed because Excel Services Application was unable to obtain a Windows Identity.
COuld you please share some ideas for it.
Thanks
Ravi
Ravi

Getting an "unable to Load the tables in the power pivot window" error

Hello,
I have 2 worksheets in a excel file and would like to load both into a power pivot table. When I click the 'create linked table' in the pwer pivot ribbon, The powerpivot window open and looks like its about to load the data but then I get
a popup dialogue box with the following error:
Unable to load the tables in the powerpivot window
============================
Error Message:
============================
The given key was not present in the dictionary.
============================
Call Stack:
============================
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at Microsoft.AnalysisServices.Modeler.SheetTabs.PopulateSheetList(String selKey)
   at Microsoft.AnalysisServices.Modeler.SheetTabs.SetSelectedSheet(String key)
   at Microsoft.AnalysisServices.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
When I try again, there is a meesage saying the table is already linked but I dont see any data.
has Anyone seen this error before and know what to do?
Thanks,
Nathan

Hi
I get first the same error as above but after I look into the details I see the following error message:
in translation the error message is: There is already a item with the same key added.
I can open the power pivot window in diagram view. And after I refresh the data in one of the tables I can open it in the table view. I have already searched for "!" signs in the calculations and searched for calculations with same name but that
is not the problem.
Also I can't open the synonym window. I think this has something to do with it because I've made changes in the synonyms.
============================
Foutbericht:
============================
Er is al een item met dezelfde sleutel toegevoegd.
============================
Aanroepstack:
============================
   bij System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
   bij Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(Tuple`2 measure, SynonymCollection synonyms)
   bij Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
   bij Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
   bij Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
   bij Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
Thanks,
Leo

Excel 2013 Standalone - Power Pivot Plug-in not visible or available for activation

Dear Microsoft Team
According to your blog, the Excel 2013 standalone SKUs have now been updated to include Power Pivot and Power View. (follow this link: http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/02/27/unable-to-use-excel-2010-powerpivot-workbooks-in-excel-2013.aspx)
I've just bought Excel 2013 standalone (non-commercial, SKU AAA-01350) from the MS Store and cannot see either Power Pivot or Power View among the list of the COM Add-ins available. The corresponding sections don't appear in the Excel ribbon.
Are you aware of any glitches in the Office 2013 installation logic that might have caused such a problem? My PC runs Windows 8 (32-bit), with both Office 2010 and Excel 2013 Standalone installed.
Thanks
Svviss

Hi Ron
Thanks for your prompt reply. Unfortunately, that didn't make much difference. I had a dialog shown to me reading the following:
Update for Microsoft Excel 2013 (KB2817425): There are no products affected by this package installed on this system.
I've since done some digging around and there seem to be other accounts of the newly updated Excel 2013 Standalone not installing Power Pivot. Here is the link (scroll all the way down, to the most recent comments):
http://www.powerpivotpro.com/2013/08/power-pivot-power-view-now-available-in-2013/
Any other ideas or workarounds?
Thanks,
Svviss

HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
It might have happened when I was accessing my camera bypassing the lock screen!
All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
Thanks folks

You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

Power Pivot Bug: Can't Save Edits to Power Pivot Query without checking Teradata Connection's "Save my password" Option

Can't edit and re-Save Power Pivot query with Teradata connection (using LDAP security mechanism) unless "Save my password" option was checked. Without this option I receive this error upon attempt to Save changes made to the query ...
The following exception occurred while the managed IDbConnection interface was being used: [TeraGSS Security Library] [115022] Exception occurred in TERAGSS layer. See inner exception for details.;TdgssAuthenticationTokenExchange delegate threw an exception.
See the inner exception for details.
ErrorCode: -452984642 Severity: Error Facility: DotNet
[Teradata Database] [8017] The UserId, Password or Account is invalid..
A connection could not be made to the data source with the DataSourceID of '6a06124c-496f-4887-bf39-d2582173d499', Name of 'Teradata fsltdprd'.
An error occurred while processing table 'Query'.
The current operation was cancelled because another operation in the transaction failed.

Sorry you're right, the Office category isn't currently accepting bug reports in which case Olaf's suggestion to use the smiley face is the way to go. In Excel please go to File > Options > Trust Centre > 'Trust Centre Settings...' and check
that the Feeeback Tool is enabled.
If the option is greyed out like this...
... then you should be able to enable it by changing the value of the 'Enabled' registry key from a 0 to a 1 which you will find under: HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\Feedback. You will then need to close all Office applications
and re-launch Excel 2013.
Once the Feeback Tool has been enabled, you should see the smile face(s) in the top right hand corner of the Excel window and be able to send your feedback.
Regards,
Michael
Please remember to mark a post that answers your question as an answer...If a post doesn't answer your question but you've found it helpful, please remember to vote it as helpful :)
Website: nimblelearn.com, Blog:
nimblelearn.com/blog, Twitter:
@nimblelearn

Power Manager 3.05 - Can't Install on Windows 7

Anyone have a suggestion on how to install Power Manager 3.05 on Win 7. I've tried several times to manually install from download and from System Update (4.x) to no avail. System update says I have no previous version installed... although I have a battery gauage on my taskbar.. just that none of the menu items work. System Update log claims to have a successful install and asks to reboot, but I get the same result.
The manual install from download says: "Warning. Cannot run on this system." This is true with both 3.05 and 3.01a.
When I bring up the Control Panel, I get an error "Power Manager. An error occurred while loading resource DLL."
There is no Power Manager software listed in the "Uninstall Programs" listing - so I can't find a way to uninstall the previous version (whatever version it is, I don't know.)
I have a t400 & W7 32bit
I currently have Hotkey installed (On Screen Display 5.32.00; Thinkpad Full Screen Magnifier 2.10)
I have PM Driver 1.55 installed - downloaded from lenovo.com.
This seems to be the last remaining issue since my upgrade to W7. Any suggestions greatly appreciated!
Solved!
Go to Solution.

Problem solved! Turns out the version I had installed was 1.6. I used regedit to remove all references to PWRMGR and disabled the service startup. Rebooted and ran the setup for 3.05 and it installed successfully.

I can't install Rosetta Stone onto my new Mac OSX (version 10.7.5). It says it "can't open application because Power PC applications are no longer supported." Is there any way to install?

I can't install Rosetta Stone onto my new Mac OSX (version 10.7.5)
Any suggestions?
The message says "can't open application because Power PC applications are no longer supported."
Thanks!

Thank you... spoke to Rosetta Stone and they said the same thing, and the give a nice discount when upgrading.
Normally 5 levels of a language run about $479. When upgrading, you can get the same 5 levels for $199.
Fewer levels costs even less.

Can I install Mac OS X version 10.5 on my Power PC G5 Tan Tower?

Can I install Mac OS X version 10.5 on my PowerPC G5 Tan Tower, with a single 1.6 processor, 4 GB DDR SDRAM. I am running version 10.4.11 and want to update to 10.5
I also need to know where I can find the software to buy, they don't seem to have it in the apple store.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Can't Install Powe Pivot

Similar Messages

Maybe you are looking for