Can't install PSE in new OS

I had PSE 6 on both my laptop and my desktop. I upgraded my desktop from Vista to Win 7 prox64 and have the original install DVD. When I try to install in my new OS it installs properly but on first use it asks for serial number. I type the correct number and it says "The number that you entered is not valid...." I suspect that it may not allow because of the registration of my old installation.
How many computers are allowed? Do I need to deactivate the software on my laptop (the only other computer with the same PSE serial number)? If so, can I reactivate on my laptop when I need the software in the field??

Most versions of photoshop elements 6 don't have activation and if yours did, you'd probaly get a different message like that you have pse 6
activated on two other computers.
There are 24 numbers in the serial plus the dashes between each set of four numbers, so you would type
(the X's below represent numbers)
1057-XXXX-XXXX-XXXX-XXXX-XXXX

Similar Messages

? help - Can't install PSE 9 on my new MAC

I can't install PSE 9 on my new MAC. Accepted PW first time but not the second.

It is prompting for your adminstrator password. Please work with your I.T. department or Apple if you need to have your administrator password reset.

I bought the photoshop cs2 cs3 cs5 and lightroom and lightroom 4. i can't install on may new macbookpro 13inch?

i bought the photoshop cs2 cs3 cs5 and lightroom and lightroom 4. i can't install on may new macbookpro 13inch?

On which operating system are you trying to install these Adobe apps?
Please specify the operating system name and version.
If you have purchased new Macbook Pro, then you should have atleast Mac OSX 10.9 or later. However, i doubt you will be able to install most of these apps on it as they are pretty old apps except CS5 & Lr4.
Still you can give it a shot and check.
What happens when you try to install them?
Do you get any error message? An error screenshot or full text of the error, should be helpful.
~ Arpit

I threw up the box before installing photoshop elements 13 and now i can not installed my brand new photoshop because i do not have a serial number

I threw up the box before installing photoshop elements 13 and now i can not installed my brand new photoshop because i do not have a serial number

When you buy software, the serial number is really what you're buying, since the software is typically downloadable. So don't throw it away in the future.
If you registered the software before you threw away your serial number, then Adobe may have a record of your purchase.
You could try chatting with a Support Agent:
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html

I can't install Premiere Elements {new purchase} because of "Error 2350. 'FDI Server Error.'"

I can't install Premiere Elements {new purchase} because of "Error 2350. 'FDI Server Error.'" I cannot "ignore" I can only abort. Adobe says that my purchase is not supported even though it's new. Help anyone?

Locoba
What is the computer operating system involved? Can we assume Premiere Elements 12 as the new purchase? And, are you trying to install from an installation disc or from purchased online downloaded installation files?
I have not run into Error 2350. FDI Server Error before, but here are some links that talk about Error 2350. Please see if any of them apply to your situation.
http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html
Not Adobe, Error 2350. FDI Server Error.
http://feedback.bizagi.com/suite/en/responses/error-2350-fdi-server-error
More details on your situation may help in fine tuning the issue specific to your situation.
How are you installing?
Are you installing to default location?
Is antivirus and firewalls disabled?
ATR

Can I install PSE 10-13 Win7-8 without the Organizer (uses a lot of resources)?

Can I install PSE 10-13 Win7-8 without the Organizer (uses a lot of resources)?

You can't install them separately, but it is easy to place unique shortcuts on the desktop for organizer and for editor.
In Organizer, go to Edit>Preferences>Auto Analyzer options and uncheck analyzer and people recognition if you don't use them - may improve resource utilization.

Can I install PSE 13 on both my desktop & laptop??

Can I install PSE 13 on both my desktop & laptop??

Yes, you are allowed two installations. If a download, they need to be the same operating system (either Windows or Mac). If from the disc, then it doesn't matter which operating system.

Can I install Pse 4.0 on my windows 8 computer?

Can I install Pse 4.0 on my windows 8 computer? If so, how? Will there be problems/glitches running it??

you can probably install it: http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithUp datedFilters?TempOsid=win8&Type=Both&CurrentPage=0&TotalPages=6&SortCriteria=Relevance&Sho wCriteria=2&Compatibility=All&TextSearch=Photoshop&ProductName=Photoshop&LastRequested=7&L ocale=en-us
but you'll need to use compatibility mode.

My laptop has broken and I want to migrate to a mac. Is my creative suite for Windows can be installed on my new Mac?

My laptop has broken and I am decided to migrate to a Mac. Is my Creative suite for Windows can be installed on my new Mac?

if you have cc, yes.
if you have cs6, you need a cross-grade, Order product | Platform, language swap
otherwise, no.

Can I install again my new software after 2-3 months when I buy a new Computer?Thank you

Can I install again my new software after 2-3 months when I buy a new Computer?Thank you

Yes. Also, you are allowed to have the software installed and active on two machines, so if you like you can continue to have it on the original machine. If you want to remove it from the original machine be sure to deactivate it first.

Can't Install PSE 9

I've tried 3 times to install PSE 9 from new disc just purchased from Adobe. No luck. Error message: The wizard was interrupted before Adobe PSE 9 could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again. I have Windows 7 (64 bit). Thanks.

Hi joe,
Can you please explain at what instance is the installer failing?? Whether it starts the installation progress? Whether it goes through the stage of installing Elements Organizer or Elements STI or before even reaching these stages??
Following link is a general troubleshooting document, you might want to refer this as well:
http://kb2.adobe.com/cps/858/cpsid_85843.html
Keep us updated.
Regards,
Ankush

Installing PSE on New PC

Hi
This has probably been answered elsewhere, if so apologies
I have PSE 9 installed on old Win XP PC
I wish to install it on my new Win 7 pro (64bit) PC
1/- I can't find the Serial Number. My copy of PSE 9 came as part of a bundle included with my Epson v750 Scanner 2 years ago. I must have installed the s/n when I first installed the Software, but I cannot now find the install disc/box or any email. So is there any way for me to proceed ( I didn't register the product at the time so it's not listed on my online a/c - therefore can't cut and paste it.)
2/ If I can recover the s/n will it be valid for the current version of PSE 12 ? or is there a way of installing ver 9 on my new PC.
I'm trying to avoid having to re-purchase
Thanks for your help

1/- I can't find the Serial Number.
Try running Belarc Advisor - it usually digs up valid serial numbers from the deep recesses of Windows
http://www.belarc.com/free_download.html
2/ If I can recover the s/n will it be valid for the current version of PSE 12 ?
No. PSE12 is a paid for upgrade which requires a new serial number.
You can re-download PSE 9
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html
Install then enter your PSE9 serial number.

Can't Install OS on new Hard Drive

I just got a brand new iMac G5 with a bad Hard Drive. Apple sent a new hard drive but after I installed it I can't install the OS 10.4. I ran Disk First Aid and it says Invalid extent entry, Volume check failed, ERROR: The underlying task reported failure on exit, 1 HFS volume checked, 1 volume could not be repaired because of an error. I also can not run the Apple Care disc because I have a wireless mouse. I have installed no hardware upgrades.

Like Mike said, erase fixes that type of error a lot of times. I have also had a lot of success using a program called DiskWarrior. It rebuilds the directory files and usually fixes errors like that without data loss.

Can't install(format?) new hard drive

I recently purchased a Wetern Digital Scorpio 250GB PATA HD for my Toshiba M35X-S114. This was the drive recommened on the Toshiba Laptop Accessories page. I physically instaled the new drive but can't figure out how to get it started. I used the System Recovery DVD for my computer thinking I could install the original software on the new hard drive. The guy on the tech support phoneline said I could. When I tried to use the recovery disc I got all the wall to the message where it prompts me to "press C for continue or A to abort". When I press C, the cursor moves right below the prompt and just blinks. The tech support line said the process may take several hours but I let it do this for for 3.5 hours and the cursor was still just blinking below the continue/abort message. Is this normal? Do I just need to be patient? When I used the recovery disk on the old, original hard drive my computer was completely recovered in 45 minutes. Oh, BIOS reads "none" next to hard disk. I hope this helps.

I emailed Hitachi support and got this response.
It works. Just a pain!!
Hard drives of SATA type interface does not have jumpers to configure. You
can still use a SATA 3.0Gb/s drive (set to 3.0Gb/s) in your system, but it
will only work at 1.5Gb/s.
If your have a PC system, you can temporarily install the drive internally
and use our utility called Feature Tool that'll allow you to change various
ATA settings. This utility has the diskette and CD version. If you do not
have a floppy drive and are unable to create a Feature Tool diskette, you
can select the Feature Tool CD image. The fourth download link is for the
image file. This file will allow you to create a bootable CD version of
Feature Tool when a floppy diskette drive is unavailable. For instructions
on how to properly use this file, please refer to the documentation
included with your CD burning software.
If you have any questions regarding the usage of Feature Tool, please refer
to the User's Guide (see page 17 on how to change the drive capacity). The
Feature Tool and User's Guide can be downloaded from the following URL:
http://www.hitachigst.com/hdd/support/download.htm#FeatureTool
Before running Feature Tool, ensure that your system boot sequence (in your
system BIOS) is set to boot to your CD ROM drive as the first device.
Insert the bootable Feature Tool diskette or CD that you created and let
the system boot to this CD.

Can I install PSE on mac osx 10.6

Can I

Well, that depends on which version you mean. You can install PSE 6 through 11 just fine. For PSE 12 the editor works but not the organizer, and PSE 13 requires at least 10.8.

Can't install PSE in new OS

Similar Messages

Maybe you are looking for