Can't install Reader 8.1.2 Microsoft vc80.crt Version Issue?
Hello!
My copy of Adobe reader happily downloaded an upgrade while I was online. When I went to install it there was an error, and the pop-up just said Adobe Reader 8.12 could not be installed. And then the dialog box stated that the install was finished.
In the process of this happening, my old version of Reader has vanished! So I downloaded the installer for 8.1.2 from Adobe and when I try to install it, I get the following message:
"Microsoft vc80.crt, version"8.0.50727.163", type="win32", PublicKeyToken="1fc8b3b9a1e18e3b",Processor Architecture="x86" Please see help and suppor. . ."
And then the install fails and the system does a revision back to its original state (which would have been nice on the automatic upgrade attempt BTW!).
First of all, it would be FANTASTIC is one could simply Copy/Paste such cryptic error messages, and also it would be nice if they actually told you something useful!
I have done a search on the above message, and all I came up with was a post on a forum that I think may have been in Danish with no answer to the original question.
Any help on this one?
My XP Pro system had been telling me it had adobe reader 8.1.1 downloaded and ready to install for quite awhile. I finally decided to go ahead and install it. So far as I could tell it was a normal installation.
Maybe a couple hours later my XP Pro system downloaded 8.1.2 and I decided to install that as well. It was a huge >30MB download. After preparing to install, verifying and attempting to remove some (prior?) application I get "Adobe Reader 8.1.2 Update failed to install." No clues are given as to why it failed. Any ideas?
Similar Messages
-
I can't setup itunes10.5，It says：安装汇编microsoft.VC80.CRT,tupe="win32",version="8.0.50727.6195",publicKeytoke n="1fc8b3b9a1e18e3b",processorArchitecture="x86"时出错。请参照帮助和支持来获得更多信息。HRESULT:0x80 ...
What's the problem? How can I fix it?Its a Issue with your C++ Library on your computer, a way to fix it is to Rebuild your entire C++ Library from uninstalling the highest version to the lowest verision and reinstalling them back in chronological order..
I would suggest to contact apple support, request a Senior advisor they should be able to get that squared away, now if your not in phone support period you will probably have to pay for support.
I'd suggest the apple care if you havent got it yet -
Hi,
I am trying to download the latest 10.0 itunes, however I keep getting this error message. I have a new iphone 4s so when I plugged it into the laptop it said i need to uninstall and reinstall the latest itunes.
I contacted support which they advised me to uninstall the itunes on my dell laptop, which I have done however I keep getting the same error message. "An error occured during the assembly "Microsoft VC80.CRT, version =8.0.50727.4053",type ="win32",publickey Tokens="1fc8b3b9a1e18e3b",process orArchitecture="x86". Please refer to help and support for more information. HRESULT: 0x800736FD.
Please can you advise on what best to do? The laptop is a 32bit windows 7.HRESULT: 0x800736FD.
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736fd, or some other number? (If they're another number, what number are you getting?) -
im trying to down load the new itunes and the old version was was working perfect then when i got my Iphone and Ipod touch for christmas it said i need the new verision of itunes and when i down load itunes it say Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b3 b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x800736FD." i dont understand nor do i know wat too do too fix this
Similar situation to ahmard when trying to down load itunes -
An error occurred during the installation of assembly 'microsoft. VC80.CRT,TYPE='WIN32' VERSION="8.0-50727.6195", PUBLIC KEY TOKEN="ifc8b3b9a1c18e3b", processor ARCHTECTURE="x86"". Please refer to Help and Support for more information. HRESULT:0x800736FD
Can anyone throw any light on this? -
ANYBODY KNOW WHAT TO DO?
IT WAS DOING SAME THING WHILE I WANTED UP on 10.6 verion...:(
Thank you for all answers that might helpeven after getting the new update (10.5.1 - DL1426) i still get the same error: When trying to install itunes 10.5.1 for windows vista 64bits from apple's website it shows:
An error occurred during installation of assembly
'Microsoft.VC80.CRT type="Win32",version="8.0.50727.6195",publicKeyToken="1fc8b3b9a1e18e3b",process
orArchitecture='x86'. Please refer to Help and
Support for more information. HRESULT: 0x80070002
Then I have to cancel it. Then shows: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127).
What should I do?
Tks in advance
Rodrigo (Brazil) -
windows 7...
please help; step by step?These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
does any one know why i am unable to install itunes on windows 7
Did you read threads "more like this" on the right side?
Yes there are issues and tips on resolving install errors. -
I cannot update my Windows 7 desktop with itunes 10.5? .....
Join the club. Luckily, after messing with it for 2 days, I was able to re-install 10.4.1. I'll probably wait until Apple issues a maintenance release with the "undocumented features" fixed.
-
Error occurred during install of assembly policy 8.0.microsoft.vc80.CRT
I've been trying to upgrade to itunes 9 on windows vista system. During the install, it says "error occurred during installation of assembly policy 8.0.microsoft.vc80.CRT, version 8.0.50727.403 type win 32 policy public key token=1fc8b3b901e18e3bprocess architecture=x86 Quicktime installs OK, but Itunes install is interruped -- Apple Support install portion is rolled back after this error pops up. I went thru suggested Apple troubleshooting options, got same error. Ran install as administrator from desktop, also did not work. Tried installing both thru apple software updater and directly from Apple website -- still get error. I asked about this on Microsoft site, they sent me back here. thanks for any solutions.
flabud, here are the next steps that I would suggest.
1) If you haven't done so already, reenable McAfee. I'm guessing that you've already done that though.
2) Create a manual restore point. You can also do this after each of the following steps if they are successful but you don't have to necessarily do it each time. One restore point at the beginning should suffice.
3) Disable Windows Defender so that it no longer has possible conflicts with McAfee. McAfee put out this notice earlier this year because the combination of those two programs were causing problems and that notice describes how to disable WD. You should also uncheck Windows Defender using MSConfig (Startup tab) after disabling it as described in the notice. One of my systems had the exact error message described in the notice and since disabling WD it has encountered no further problems.
4) Check Programs and Features in Control Panel for the following programs and install using the associated links if they do not show up. Restart after each installation and then check to make sure the install was successful in Control Panel.
a) Microsoft Visual C++ 2005 Redistributable Package (x86)
b) Microsoft .NET Framework 3.5 (if MS .NET Framework 3.5 SP1 already exists then do not install this)
{I added this because I had problems with this install at the time of the McAfee/WD conflict}
5) Run Windows Update and install any Important or Recommended updates. The installation of the programs in step 4 should allow the others to complete successfully but if any still fail make a note of them as you did before.
6) If everything completes successfully to this point then reattempt the installation of iTunes using the file that you have in the Downloads folder.
I've written the steps in the order that they should be done so if you run into a snag in any step let us know before proceeding to the next step. -
Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.
it says that Windows Resource Protection could not start the repair service.
Okay. We've got a broken Windows Modules Installer on the PC, then.
It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
Can't install Reader for Pocket PC on HTC Touch Diamond
can't install Reader for Pocket PC on HTC Touch Diamond? why?
Run the installation on your sync pc... the installation application will run only on a pc, then, activesync installs it on your winmobile device on the next connect session.
Beverly Howard [Microsoft MVP Mobile Devices]
(MVP Info at http://mvp.support.microsoft.com/mvpfaqs) -
Why I cant Install itunes in my windows 8? error appears and it says:
error microsoft. vc80.crt type="win32".version="8.0.50727.6195"
please healp meThese ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I can't install I-Tunes 10.6.1.7 on my Windows Vista laptop. Tried it several times. First message: Policy 8.0 Microsoft VC80.CRT..type='win32-policy, etc. Please help
I can't install I-Tunes 10.6.1.7 on my Windows Vista laptop. Tried it several times. First message: Policy 8.0 Microsoft VC80.CRT..type='win32-policy, etc. Please help
-
Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?) -
Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)
Maybe you are looking for
-
Hello all, I have looked through the Flex docs and can't find any reference to what happens if urlRequest.load() is called simultaneously by two separate parts of a single application. For example a button.click() event is being serviced where the ac
-
Elements 7 giving error message
Elements 7 is giving an message that it has stop working and is shuting down. how can I fix this.
-
I dont know if this is going to be a bit of a broad question, but we have some LiveCycle v8.0 developed forms which are distributed out to various people for completetion and sign-off. We have encountered an issue with one form that some people can a
-
Oracle SQL Analyze 9.0.1.0.0 not liking 9i SQL
Hi people, Could someone tell me how to get the OEM SQL Analyze product to deal with the 9i SQL syntax... both the CASE and ANSI "JOIN" syntaxes seem to be failing to parse. As both of these constructs are used in our application we really need to kn
-
Hello We got 3 boxes which as HP-UNIX os, the task is that we need to change GID from 104 to 351 for the WL10 group, please let me know what is the process of changing it & things necessary before changing and what is the restore option if thins dont