Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

Check your Network control panel and turn off Auto-Proxy setting.
This is one of the top #4 "how can they do this' pet-peeve errors.
The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
If auto proxy isn't it, router/modem and DNS settings.

Similar Messages

Can I upgrade my RAM from 4GB to 8GB for my MacBook Pro 13(early 2011 2.7GHz)? And how much would it be?

Can I upgrade my RAM from 4GB to 8GB for my MacBook Pro 13(early 2011 2.7GHz)? And how much would it be?

you can upgrade to 16GB if you wish to do so...
average price for 8GB 1333MHz DDR3 is around $50 - $75 depending on the brand.
why not spend $100 and go with 16GB 1333MHz from Crucial or Corsair.
you can get them from Amazon.com or newegg.com
see image below with 16GB Patriot Mac Series 1333MHz for $100.

HT204032 Can't install SMC firmware update

I'm trying to install the SMC firmware update 1.6 on a mid-2011 Macbook Air. First downloaded it from App Store, and after restart it was stuck at a gray screen with spinning icon, no text or progress indicator-- stayed that way overnight. Tried downloading directly from Apple, same result. Tried resetting SMC, then installing, same result. It won't finish instlaling the update-- any ideas?

Check your system profiler ...if your SMC is up to date it will read: SMC Version 1.4f12. If it is not and you have the first gen. Macbook (CoreDuo) then make certain that you are running 10.4.8 before you begin the update.
Make sure you are following these instructions explicitly...
To update the SMC firmware on your MacBook:
Your computer’s power cord must be connected and plugged into a working power source.
1. Quit all other open applications.
2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.
The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
As the instructions say - you have to restart the machine via the installer. Also, you do not mention but did you have a status bar appear during the update?
Macbook 1.8-) Mac OS X (10.4.8) Week 38 base model w/1G Ram

Help! Stuck in firmware update for new macbook pro

Help! Today software update asked if I wanted to do the firmware update for my 1 month old macbook pro. It did warn there would be a grey screen and not to adjust the power, but 3 hours later I am still staring at a grey screen. What should I do?

Thanks for the links. I followed the instructions to the letter for the firmware upgrade - it was connected to ac power and stayed that way the whole time.
I've got 2 questions -
1. I've got a grey screen - The first link says "In the unlikely case that your computer displays a black screen after starting up, you can restore your computer's firmware back to factory condition. Follow the directions to restore your firmware." Is this still me?
2. If I restore the firmware to factory settings, do I lose my data?
thanks,

HT4407 i can't download windows support driver for my Macbook Pro 13" end 2011

Everytime i tried to download Windows support software from Boot Camp Assistant, i got an error message like "Can't install Windows support Software because you are not connected to the internet". Can someone help me please !!!!

Check your Network control panel and turn off Auto-Proxy setting.
This is one of the top #4 "how can they do this' pet-peeve errors.
The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
If auto proxy isn't it, router/modem and DNS settings.

Should I get Windows 7 or 8 for my Macbook Pro 13" early 2011

Hey All,
I was just wondering if anyone could give me some advice what which version of Windows I should get. My plan is that I wanted to learn some beginning program stuff that might (in the future) progress into more advanced computer programming. I decided for myself that it would be best to start learning on Windows software, but I didn't feel the need to purchase an entirely brand new computer since my macbook pro is so great.
I've been reading on bootcamp stuff, and it seems as though bootcamp does not yet support windows 8.1 (which would have been my first choice). Since I cannot currently use 8.1, what might be the next best solution? Should I just go with the supported windows 8 and just wait to update to 8.1 when bootcamp finally supports it? Or should I perhaps go the safer route and go with the 64 bit version of Windows 7 (which I heard was still good as far as windows goes).
I'm hesitant on the Windows 8 option becasue I had heard a lot of complaints about it, and I don't know how long it would be until Apple updates Bootcamp to support it. My only fear with the Windows 7 option is that it will become outdated much faster than previous versions of windows (just because it seems like there was a big jump from windows 7 to windows 8).
Any thoughts would be helpful. Any specific insight as to which version might be better for me to learn computer programming on is a definite plus. The specs for my mac should be listed below, but I'm also planning on upgrading to a Seagate 1TB solid state hybrid drive SATA 6Gbps 64MB Cache 2.5-inch ST000LM014. Also, I have an Intel HD Graphics 3000 512 MB.
Thanks!!!

Would these be the correct discs to use?: http://www.amazon.com/gp/aw/d/B004Q0PT3I
Seems like a reasonable price....besides "pirate free" of course.

What brand of SSD should i buy for my macbook pro 13 early 2011

im interesting in upgrade my early 2011 macbook pro 13inch ... what brand of memory ram and ssd should i buy? having in consideration speed, and quality, issues free.
thnak you
sorry for my bad english ..

Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
I recommend buying RAM from:
OWC
DataMem
Crucial.com
I would stick to SSDs like the OCZ Vertex 3, Samsung 840, or OWC Mercury 6G. You may also care to look at the DataDoubler from OWC. A bracket that lets you install both an SSD and your existing HDD in the optical bay by removing the DVD drive.

Can't instal SMC firmware update on my MBP 1.83

Hi. I tried installing the new firmware 3 times but my MBP restarts and shows a blinking file folder with a question mark. If i then restart i start right up into OSX. I also have a partition for XP and have no problems booting using the option key. Any ideas? Thanks all!!

Hi,
First go to System Preferences -> Startup Disk -> select your Macintosh Disk, and click the lock to prevent changes.
That should do it.

What SSD should i choose for an macbook pro 17inch early 2011?

i have been hearing great things from the samsung series, and i was going to choose this one
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=84666 39&CatId=5300
Also i have another question, will this also help with heating issues i have sometimes? for example i use programs like final cut pro x and adobe premire, and apple motion, after effects, and if i do intensvie things it will sometimes overheat, causing some lag in the programs, espically if i work on 1920x1080 footage if im just cutting up clips, i use my SMC fan control alot to cool it down and it helps, but it ***** i have to turn it on as soon as i open up a program cause i know the fans will rise
Also my overheating issues sometimes go into the browsers i use, chrome and firefox, if im on a very flashy website or watching videos, it will heat and my vids and websites will lag and glitch, it ***** i have to use safari cause of this, my only qualm with safari it is not quick enough, pages load slower, and images loading up are super slow, but atleast with safari videos play good, and i dont get any heating up, i will say i had no problem using chrome and firefox, before upgrading to mavericks and now it just heats up and lags,
or does this depends on my video card and ram?
Here are my specs
Processor 2.2 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
Serial Number C0******F92
Software OS X 10.9.2 (13C1021)
<Personal Information Edited by Host>

oh and another thing, it doesnt heat up when the programs or browsers set idle, and if im doing not to heavy editing in my programs
thanks in advance

Best Internal Hard Drive Update for Macbook Pro 13" early 2011?

Hey everyone,
I was just wondering if anyone could give me their opinon as to what might be the best hard drive to update on for a Macbook Pro 13" early 2011 model. My budget is about $100, and i'm looking to increase the size of my current hard drive (which is a 320gb hard drive). I know that SSD are out of my budget range as anything even reasonably priced only gives me about 200+ gb of memory. I'm wondering if anyone has had any particular experience with the Seagate 1TB solid state hybrid drive (found here: http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ). It boasts SSD-like speeds at a fraction of the cost, and its right around my budget, but perhaps its too good to be true? I saw the other thread about this hard drive question, but it didn't seem like anyone had any personal experience with it.
Anyways, just wondering if this one here is a truly a good deal, or if anyone has any better suggestions? Thanks in advance!!!
********P.S. Just as a side note, I'm wanting to increase the storage on my computer because i'm wanting to use bootcamp to install windows, and I want an ample amount of space to store movies, games, pictures and music. Not sure if this is even relevant, but i'm wanting to start doing a little bit of beginners programming stuff, so i want to make sure that i'll have enough empty space on my hard drive to do whatever it is i need to do. As it is, I've got about 62gb in movies, 81gb in photos, 41gb in music and 14gb in apps.....I'm really pushing the limits of my storage......*****************

rchu89 wrote:
I'm wondering if anyone has had any particular experience with the Seagate 1TB solid state hybrid drive (found here: http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ). It boasts SSD-like speeds at a fraction of the cost, and its right around my budget, but perhaps its too good to be true?
I have two of those Seagate SSHDs, using one as the internal drive in my primary MBP. Boot and shutoff times are dramatically less than before (using 7200 rpm HGST HDDs). In other respects, I have no complaints regarding the drive performance. I can recommend them based on my limited experience (~3 months). The $99 price does look very attractive.
Note that when you install a HDD of larger capacity in a MBP, it should be reflected in your backup strategy. Do you have a backup drive to accommodate the additional data that you will be able to store on the new internal HDD?
Ciao.

Macbook (late 2006) RSS unable to install SMC firmware update

Hello,
I bought my macbook on the 27th of December, and the first week it worked fine. Then started the RSS. I did some googling and found out some stuff about RSS, tried to install the SMC firmware update but it would just tell me that I don't need the update. After two weeks of constant RSS:ing I called applecare and told the guy about the problem, he told me to try to update the SMC and if I can't do it bring it in for service.
Monday the 15th of January I went to the macstation in downtown Vancouver and told them about the trouble, they tried to boot it, and it actually booted but after like 3 minutes the macbook crashed. For about 10 minutes two guys tried to boot it and so on, but they didn't get it to boot. So they took it in for service and somebody was going to check out the macbook and see if it would need a replacement logic board - which it did. So on Monday they ordered the logic board, and today Monday 22nd of January I got it back. Now the thing that bothers me is that when I now try to update the SMC firmware (my current version is btw 1.13f3) it still just says that This computer does not need this update. oh well - i went to apples support page to try to see if there would be a newer release of the smc and then I noticed that in the bottom of the SMC firmware 1.1 update page it says:
Note: This update is only or the original MacBook, and will not install on a MacBook (Late 2006).
Then I really was like W T F?!
I would assume that people who work for apple would know that the SMC update will not update on a computer from late 2006, but nobody ever mentioned this to me.
I've now had the computer for about an hour and the CPU temperature is at about 50 degrees celcius, with firefox, msn and a terminal open... about 5% cpu load.
What I'm really wondering is that is there anyone who has similar problems with a macbook late 2006? I guess I'll just have to see if it works and just like I told the guy at macstation, if it starts RSS:ing again I'll be banging on their door
macbook 2,1 Mac OS X (10.4.8) rss, unable to install SMC firmware update
macbook 2,1 Mac OS X (10.4.8) rss

See if reviewing the installation instructions provides any help:
http://www.apple.com/support/downloads/macbookefifirmwareupdate10.html

How do I install the firmware update for LinkSys E900 router?

Hi,
I'm using Mac 10.7.5 and a few months back had purchased the E900 wireless router. It has firmware 1.0.03 installed and I noticed there is a 1.0.04 update. I downloaded the update, which is a .bin file, but I do not have a CD burner nor access to a Windows machine. How can I install the firmware update?
Thanks, - Dave
Solved!
Go to Solution.

Simple, with your wired computer (never wireless) just access the GUI in the router and perform the firmware update. Just point to the .bin file and away you go. Make sure to hard reset the router and reconfigure it after you are done.

Can't install EFI Firmware Update

Hello,
i can't install the Firmware Update (EFI 1.1) on my MacBook (Core 2Duo, OS X Version: 10.4.10).
My System is on an GUID partition scheme.
I get a white screen after the "long beep" and after a few minutes the cpu fan start to run.
I disconnected all my peripherals but this does not work either.
Any suggestions?
Regards,
jan

Welcome to Apple Discussions!
This article explains the firmware more in depth and what to do if there is an issue:
http://docs.info.apple.com/article.html?artnum=303364

Has Apple pulled the SMC update for the Macbook Pro Retina from the App Store

Does anyone know if Apple pulled the SMC update for the Macbook Pro Retina? I can no longer see it as an update in the app store. I am refering to the update that enables power nap on the Macbook Pro Retina.

It showed up in my ML App Store.
What is your SMC version?
Mine is
SMC Version (system): 2.3f28
and I don't have the update installed.
Message was edited by: psedog

Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

I have a few of these RAID cards in a couple servers, and then I have an earlier version of the RAID card in a few different servers.
The earlier servers are running non-apple 1.5 TB drives. It will be interesting to learn if this firmware update will indeed allow me to boost the capacity by installing non-apple drives, as the firmware previously has not.
Ohh I'm excited to update and try! This will greatly help out if it does!

Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

Similar Messages

Maybe you are looking for