Can't install snow leo on mac mini

I want to upgrade my mac mini from leopard to snow leopard with the install disc that came with my imac i5.
mac mini specs : 1,83 GHz intel core 2 duo
2 GB 667 MHz ddr2 sd ram
GMA 950 gfx card
500 GB HDD with 245 GB free
According to apples system specs i should be able to install snow leopard on this machine but i get a message when attempting to install that snow leo can't be installed on this system?
I tried this via disc in finder and via push c at startup,both give same warning.
What other options are there?How to install snow leo then?

Hi Red_viking;
Yes that is true. The DVD that comes with a Mac is set up specifically for that Mac and can not be used on another.
Allan

Similar Messages

  • Can't install Snow Leopard on Mac Mini with 10.5.8.

    I'm trying to install an upgrade copy of Snow Leopard from Apple on my Mac Mini running 10.5.8. I bought this system used and the volume says ";" and the error log code is 21. Seems it can't find valid softward ID to continue or the path is different. Not sure where to go with this.

    If your mini meets the specifications for Snow Leopard (an intel processor and 1GB or more of memory)
    then go here to buy snow leopard
    http://store.apple.com/us/product/MC573Z/A
    It's possible that the upgrade disk you have is specific to particular Mac models.

  • Can I install Snow Leopard on Mac Mini Server hardware?

    What I would like to do is buy the Mac Mini Server but I don't need the server OS. I want the desktop OS on the Mac Mini Server. Will installing Snow Leopard on the server hardware be just like installing it on a regular Mac Mini?
    Or should I just wait and see how Lion shakes out?

    Thanks Indy, I already had proceeded the installation according your tip. Just an objection related to the updates: I was able to install the OS updates only while in target mode, as when I made 2 attempts to update the version 10.6.6 to the current one (10.6.7 - the combo one and the MBP version too) it was not permitted. I had to plug the FW cable into the MBP again and update the Mini's OS (using the special MBP version of 10.6.7) in target disc mode. I want to use the Mini as a media server and intend to install Windows 7 on the other HD which now hosts the server OS. However, according to one poster (Sven G) there are some problems (I don't know exactly what they are) related to Boot Camp software. Have you any information about these problems?
    I have maintained both OS (standard and server) living side by side on the Mini, is there any problem with that?
    Again many thanks, you were succinct, right to the point, and your tip just proved itself correct. 
    Cheers
    Marola

  • Need help installing snow leopard on mac mini 10.5.8 intel based

    I need help need help installing snow leopard on mac mini 10.5.8 intel based so if u kno how pls message me thanks
    <Email Edited by Host>

    You need to purchase the upgrade disk (it is a DVD). Then just put it in and run the installer. When it was first released it was $29 USD, do not know if the price has changed or not.
    The usual precautions about backing up your data apply. In fact I would recommend either making a Disk Image of your current boot drive or using something like Carbon Copy Cloner to copy it to an external drive. I upgraded 5 machines from Leopard to Snow Leopard without any issues, but better to be safe than sorry.

  • Installing Snow Leopard on Mac Mini Server

    I recently purchased a 1Tb 4Gb Mac Mini Server, running Snow Leopard Server. I want to use it as a central repository for my other macs: storing music, movies, backup, screen sharing (it's hooked up to my 32-inch TV) but I also want to be able to run Logic Pro, Ableton Live, etc. I also have a Macbook Pro running Snow Leopard Client, which contains all of my programs, plugins, data, etc. I realize that Snow Leopard Server does not have migration assistant, so I have tried to install a retail copy of Snow Leopard onto the secondary drive, but when it gets to the restart stage it crashes every time. I think this is a firmware issue, because the Mac Mini has a different hardware configuration to other macs. I do not have access to the mid-2010 Snow Leopard Client for Mac Mini which would allow me to install Client and use migration assistant from there. What I would like to know is:
    1/ Can I manually migrate my plugins/settings/programs to the server? If so, how? What is most crucial (and what I don't understand) is copying my audio units and audio programs (e.g. Logic Pro, Pro Tools). Because of the firmware issue, it seems more difficult than cloning my MacBook Pro to a time machine HDD and running from there... I would really like to purely clone my MacBook Pro, because I am very happy with the way it is set up.
    2/ Should I just wait for OSX Lion (July/August) which seems to be a combined server/client os, install that on both machines and run migration assistant from there?
    3/ Is there another method I can use? Something I am overlooking?
    Thanks in Advance.

    Thanks for your reply. I talked to the Apple Support again and they told me the server edition could only be used on that OS and if I wanted to use it as something else I could chose not to use the server applications, or buy a regular Mac mini. And that was all they said. Interesting since it was one of their sales persons who told me I could install Snow Leopard.
    Anyway, I got hold of a client disc and it all worked like a charm.

  • Can't Install Lion on a Mac Mini i5 in no way

    Hi, i have got a mac mini 2011 (i5, 4gb ram, 500gb hdd) recently...
    Im trying to boot from a dvd with OS X Lion but im getting a prohibitory sign, i have learn lot of posts on internet about that but no usefull solution.
    I have tried botting from a usb flash drive, but it doesn't work...
    I have tried downloading the system using the recovery client on the mac mini... but download process die at the middle everytime i start it.. so...
    I don't know what to do... i read that OS X Lion 10.7 cannot boot on this kind of mac mini (and macbook air), and i needed to do this with a more recent version like 10.7.2 or 10.7.3... so i've done it with 10.7.3, but the prohibitory is still appearing..
    I don't know what's the problem.. i have got OS X Lion clean install on my macbook pro (2010) without problem.. but i cannot get it working on the mac mini....
    Any help please?
    Regards

    what kind of hardware fault are you talking about?
    Memory or logic board.
    if it was installed, what would be the problem (for you) to be installed again?
    I'm not sure what you mean. I agree that if the machine is in working order, you should be able to install Lion on it. But apparently you can't, despite trying in at least three different ways.

  • Can I install windows on a Mac Mini using a disk copy of my Dell laptop

    I am just aquiring a late 2012 Mac mini to replace my aging Dell laptop.
    My copy of Windows 7 is an U/G copy from Vista, however my Vista copy is an OEM version
    and so will only install on the Dell.
    Can I make a disk copy of the Dell HDD and install on the Mac as though I am installing onto a new Windows HD?
    Any help will be much appreciated as though I have a Mac Book I'm not a Mac expert by any means

    I doubt it. How did you plan to install it?
    Using bootcamp?
    A virtual machine like VirtualBox?
    Those install using a ISO or DVD

  • Install snow leopard on mac mini with broken DVD Drive

    I want to upgrade the OS on my mac mini but the hard drive keeps kicking out the disk - I read that I "might" be able to fix this by using a DVD cleaner but I am not overly optimistic about this fix. I have an external USB drive and a Windows PC to work with so I am wondering if I can use the DVD drive of the PC to copy the install disks to the external drive and then perform the instal from the external drive. I have been reading posts and can find advice on how to copy the Leopard install discs using another Mac or by using the remote disk feature - but since I don't have another Mac, these are not currently options.
    Thanks

    1. Clean your drive and reset the > PRAM, then try upgrading with the Mac Mini's drive.
    2. Try out that external USB DVD drive, some will work if they are not OS X compatible.
    3. Your PC might work, see > DVD or CD sharing: Using Remote Disc

  • Can I install Windows XP on Mac mini 2011?

    I managed to install Windows XP by other means, but......
    Where are the drivers??

    Would almost just run the intel chipset identifier from the site if XP is needed.  Apparently there are a few chipsets for the Sandy Bridge configuration in this processor.  If you ambitious and google alot you can probably break the hardware down to specific drivers. For example:
    http://www.intel.com/support/graphics/intelhdgraphics3000_2000/sb/CS-032057.htm
    Has the GPU driver and:
    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=861&DwnldID=18498& ProductFamily=Chipsets&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+C hipset+Identification+Utility&lang=eng
    Should assist in identifying and applying the chipset drivers.  Although this is all user beware, as I have not done it with this particular mini.  So expect alot of time to be put in and alot of trial and error (and possibly won't work).  May try this on the weekend and will post results if I get the time.

  • Can't install Mavericks on my Mac Mini

    I get this message:
    panic(cpu 1 caller 0xffffff802eb5e045): "Process 1 exec of sbin/launched failed. errno 2"@/SourceCache/xnu/xnu-2050.48.12/bsd/kern/kern_exec.c:3560
    Debugger called: <panic>
    Backtrace (CPU1). Frame : Return Address
    - 7 strings in 7 lines -
    BSD process name corresponding to current thread: init
    Boot args: config="\OS X Install Data\com.apple.Boot"
    Mac OS version:
    not yet set
    Kernel version:
    Darwin Kernel Version et cetera...
    Kernel et cetera...
    et cetera...
    After this message I need to reinstall MOUNTAIN LION.
    I did the installaion by 4 times and I get the same results above.
    Please help me!
    Thanks,
    Z.

    could this thread from Mountain Lion installation failures solve the problem?
    https://discussions.apple.com/thread/4139835?start=0&tstart=0
    by keithfromvirginia beach  on Jul 27, 2012 2:16 PM
    I have resolved the issue. Here is what I did to resolve the issue.
    Cleaned up the PGP removal by following the steps from Symantecs sitehttp://www.symantec.com/business/support/index?page=content&id=TECH149057
    Removed the OS X Install Data Folder (not sure if that was the exact name) from the root of my HD. I noticed it was sitting there and is not normally there. (I think this was the fix)
    I also redownloaded ML install from app store just in case.
    Ran fresh download and install went according to plan and I am typing this from ML now
    Good Luck anyone else with the same issue.

  • How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

    How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

    Hi.
    You simply can't. Snow Leopard is compiled in Intel binary only.
    Good Luck.

  • I have a late 2012 iMac and a late 2009 mac mini.  I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.

    I have a late 2012 iMac and a late 2009 mac mini.  I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.
    According to Cruicial my mac mini could use:
    Module Size: 8GB Kit (4GBx2)
    Package: 204-pin SODIMM
    Feature: DDR3 PC3-8500
    Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64
    Also According to Cruical my iMac uses:
    Module Size: 8GB Kit (4GBx2)
    Package: 204-pin SODIMM
    Feature: DDR3 PC3-12800
    Specs: DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V
    I want to increase the ram in both computers. 
    So,  can I put the iMac ram in my mac mini and then I'd only have to buy ram for my iMac?  Naturally the ulitmate test will be when I actually install it,  but having an expectation of success or failure will allow me to plan on what to spend money on.
    Thanks,
    Bear

    Thanks for the responses.  I probably wont even try as my priority is Ram for the mac mini.  2 is not enough.  8 for my imac is okay for now. 
    Somewhere I thought I'd heard that faster Ram would simply clock at the lower speed.  It seems that I am incorrect.
    Thanks,
    Bear

  • I have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

    i have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

    You can do it. This article from Macworld will be helpful to you:
    http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
    I recommend the "brute-force" method.
    Just make sure you have your data backed up properly!

  • Can't install Snow Leopard on a MacBook

    Hi guys...
    A friend of mine brought me his Macbook to fix it because the hard drive was making sounds and now won't boot.
    The drive in fact is bad, it barely mount, makes noises, etc.
    I've replaced the internal hard drive for a Toshiba 320gb SATA 3.
    The thing is that apparently the DVD doesn't recognize my drive and of course, i can't install Snow Leopard.
    My question is, is this a problem with the new drive?. I believe that being a SATA3 could be causing the problem.
    Second question... Can i install Snow Leopard (somehow) using my Mac mini?
    Thanks so much and i hope you can help me.
    Regards.
    Francisco.

    Hi!!
    >I've used another internal hard drive and installs correctly<
    Using the DVD installer?
    Yes
    So it boots with another hard drive in there but ejects when you put the Toshiba in there?
    Yes but it only make sense if the DVD would create a temporary partition or something in order to install the OS.
    >Could it be that the drive is SATA3? <
    Even so it would be downwards compatible.
    I though so too
    >or maybe the hd is bad?<
    That would make more sense.
    I'm going to clone the installation that went OK in order to see if it's actually my internal drive the problem.
    Could it be the manufacturer?
    Thanks so much and i'll let you know.
    Regards.
    Francisco.

  • Trying to install Windows 7 on Mac Mini Mid2011

    Am trying to install Windows 7 on Mac Mini (Mid 2011) OS X Mountian Lion (10.8.2) - 2.3GHz/i5/4GB/500GB with external optical drive attached. Using Windows 7 Ultimate (on USB Flash Drive) and Windows Support Software (on separate USB Flash Drive), as the external optical drive is not recognized when Boot Camp restarts to begin installation process. Here are some issues I am having:
    Going through BCA, when selecting the new partition to install on (Disk 0 Partition 4 BOOTCAMP), the warning of "cannot be installed...", so I select  Drive Options (advanced)/Format. Drive is reformatted to the NTSF, but loses the BOOTCAMP name. (Reformats to UNTITLED);
    Installation of Windows 7 proceeds, until after its third restart and the color bar with the light burst at its center appears at the bottom of the screen with messages stating "Preparing....". The computer then reboots and starts this endless boot loop.
    As it never gets to the part where the Windows Support Software is engaged, can I have both the Windows 7 Ultimate installation and the WSS on the same USB?
    I have been researching this issue, but with no difinitive solutions (other than snarky "You obviously didn't read the prior post for this issue..." & "Don't people READ previous posts?" responses.), other than one rude reply saying this was a known issues and there is a fix/driver for it, but no reference as to where this fix resides.
    Please if anyone has a solution, I would be very grateful for serious and considerate answers. If you feel the need to be rude/snarky/downright unhelpful, don't reply. This is a community help page, not your venting page.
    Thank you in advance for all serious replies.
    JAMinard

    Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
    I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
    Thanks to BobTheFisherman for the link.
    There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
    Give it a try. You might like it or it may not be your cup of tea.

Maybe you are looking for

  • HT203175 I updated iTunes and now it wont open. Is there a fix that doesn't require re-installing it?

    I did the latest update for iTunes and now it wont open. It says my version is corrupted. Is there a way to fix it without re-installing?

  • Macbook Pro running with lid closed

    hi guys, i am having this problem from the very beginning: my macbook pro 15" non retina is running with the lid closed. when i close the lid it goes to sleep but when i come back a few hours later the fans are running audibly and the mbp is warm, so

  • Exadata and Out of the Box Software

    Hello I would like to know does exadata servers come with 11gR2 software pre-installed ? What about the Grid Control ? Regards Senthil

  • Credit for returns

    Hi Experts, We have created a delivery no. for employee returns. A billing doc was created ( credit for returns ) in VF01 for this delivery. After 2 months, another billing doc was created for this delivery no. When we check the status of delivery no

  • ESS Paystub Payslip extra page

    our paystub on ESS is working fine with a small issue that we its displaying an extra blank page after the paystub. though there is no overflow of paystub. we dont want extra page. we are using ZHR_ESS_PAYSLIP_TO_PDF copied from HR_ESS_PAYSLIP_TO_PDF