Can't install the latest itunes for windows vista basic
I try to download the latest itunes 9, it will tell me to run or save, when i click save it shows that it is downloading but after an hour, it still shows 1%. I've tried this several times but so far i haven't had a error message as I usually shut it down because it takes too long.
Please help! tried following the usual troublshoot solutions but so far nothing works
Save to a different location. Or try a different browser.
Similar Messages
-
I am unable to install the latest iTunes for Windows.
I get an error message that it is trying to open c: runtime incorrectly. So now I am unable to run iTunes on my Windows 7 machine, and get access to my 30,000 songs. Help!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
Can not install the latest itunes on Windows 7 x64
I have recently purchased an Ipad and need to download itunes onto my computer. Its a windows 7 64 bit operating system that was already installed upon the purchase of the computer.
I have downloaded the most recent itunes program from their site and made sure I had the correct file for the 64 bit computer. When I click to run the installation program I get the pop up window that asks if I "want to allow the following program from an unknown publisher to make changes to this computer" I click yes and then nothing happens. I don't get an error code so I can't give you that it just doesn't do anything.
I have tried all the troubleshooting methods suggested by itunes here - http://support.apple.com/kb/HT1926 and even looked to see if I could find a similar situation on the help boards. So far nothing has worked. Can anyone help me?UPDATE: Okay after repeating the troubleshooting steps for what seems to be the 5th time and re-downloading itunes for what seems to be the 6th time I have now managed to install itunes *does happy dance*
Thank you for your support advice and patience. -
I Can't Download The Latest iTunes For Windows.
I go to the site and click download and then it asks me where I want to save the installer and I save it, I go to where I saved it, there is nothing there. How can I get this to work?
Help Me!!!
I Have:
iPad 2
iPhone 5
iPod ClassicSave to a different location. Or try a different browser.
-
I am unable to access the iTunes store for the last two months, I've tried removing the software and re-installing the latest version for Windows XP and still no access; is there a solution that would allow me to get access again?
If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
Hi, Need help. I am trying to download the latest iTunes for Windows application but on running the program it says that it can not be completed as it can not find the folder location of the file "iTunes.msi" . Any clues would be appreciated
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itunes, therefore i can't change playlists or add songs etc. Is this a fault with itunes as it was fine with the older version or is there something i can do. I'm not on IOS yet but would like to backup my phone first but can't do that atm due to not being able to view my phone on itunes!
ThanksHi, jodie_0182.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the above step does not resolve the issue, try all remaining steps in the article.
Cheers,
Jason H. -
I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.
All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC -
I am trying to get iTunes up and running again on my PC. I have followed the "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" I have uninstalled, re installed, made a new user account gone through the system - wide fixes and still no joy. There are 5 Ipod devices in the house and we deperatly need to get this fixed.
Any help would be greatly appreciated
RobertRefer to following articles to remove SC file(s):
Win 7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your Quicktime:
Control Panel >
Win7/Vista - Programs n Features.
WinXP - Add n Remove Programs
Hightlight QUICKTIME and click CHANGE then REPAIR. -
I have had nothing but trouble with syncing my iPhone 5 with iTunes. I have installed the latest version of each and worked with support but no solution. Currently when I connect the iPhone the Terms and conditions appear every time, I agree and sometimes there is a sync and sometimes not. It also tells me I have 5 conflicts but looking at Outlook and the phone there is no conflict. If you tell the system to correct the conflicts it gives a message it cannot access the conflict server. I am running Windows 7.
Any help would be appreciatedMake sure you have your data backed up, then reset sync services per the instructions below.
OS X: Resetting Sync Services
This should take care of the iTunes issue. -
I have downloaded the latest itunes for window 7 but it will not open on my computer
I have downloaded the latest Itunes software but it will not open on my computer
Try this article: TS2363
That may help it out. -
HI! My itunes on windows 7 opens once. If i close it, then it will not open again. I then need to turn computer off and back on and it will open again, once. I have tried troubleshooting with the article 'unexpected quits, freezes or launch problems' but that did not help. I have also tried disabling the Bonjour Service. No change either. Please advise. Thanks.
Refer to following articles to remove SC file(s):
Win 7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your Quicktime:
Control Panel >
Win7/Vista - Programs n Features.
WinXP - Add n Remove Programs
Hightlight QUICKTIME and click CHANGE then REPAIR. -
The latest itunes for windows will not install
I have an old PC running windows and I want to transfer my itunes songs to my ipad. I can't do this until I update iTunes but trying to update does nothing, either from iTunes or from the web page. I've tried rebooting the PC, still doesn't work. How do I get iTunes to update? Or, how do I transfer to the iPad without updating? The version of iTunes I have is older than 10.5, not sure where to find version #. Thanks!
Hi b noir, thanks for offering to help. i documented the whole process:
Itunes transfer from pc to ipad.
1. Connect ipad to PC
2. Pc recognizes ipad as a camera, gives me list of programs to launch, not sure if this has any relevance, no itunes on list, instead its kodak easyshare, ms doc wizard, ms camera sharing, ms word,mp navagator ex, omnipage, photoshop - I ignore this screen
3. Launch itunes, get screen, "ipad requires v 10.5 or later' go to itunes.com. I click ok
4. I get screen, still in itunes, "a new version (10.7) is available." I click download.
5. That screen goes away but nothing happens. No download starts.
6. Checked itunes folder on my hard drive, no sign that anything new has downloaded
7. Launch safari, go to itunes.com, hit download button
8. Nothing seems to be happening.
9. I get "thank you for downloading itunes" screen.
10. Still nothing new in itunes folder.
11. Get AVG screen telling me to restart my pc to finish download process.
12. During shutdown, I get screen,"the instruction at 0x100066dd referenced memory at 0x100066dd. The instruction could not be read." Gave me options to terminate program or debug. I did not choose either. No idea if this is relevant.
13. PC rebooted anyway.
14. Launched itunes
15. Got same message as before - "ipad requires v 10.5 or later' go to itunes.com. I click ok
16. Even though ipad is plugged in all this time, the screen that thinks the ipad is a camera does not come up this time.
17. There is nothing to the left of the itunes interface that lists devices - this is where ipad would appear, right?
18. Ipad appears on My Computer control panel
19. My version of itunes is 10.3.1.55
20. In itunes, i go to Help - Run Diagnostics - run all but Cd/Dvdtest
21. Secure Link to Itunes store failed, everything before that is ok. I click Help. nothing happens. Store appears in itunes so I don't see why this would fail.
22. Since help doesn't work, I move on in test. Two more fail screens: itunes helper not running, no ipad found. help brings up appropriate pages for both. Both recommend removing and reinstalling itunes.
23. Device sync also fails.
If it would be quickest to delete and reinstall itunes, I am willing to do that. My music would not be deleted correct? What about playlists (not as important to me).
I also have all my music backed up to CD. It would be tedious to copy that all to ipad, but if there is a way to do it and no other option, I could do that.
Sally -
I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
BT Sport App Crashes every time i load
Seeing as im paying to use this service i thought i'd ask why i can't view what i want. There was an update this morning for the BT mobile app and since then i've been unable to view any BT Sport channel on my mobile. When i go to load the channel it
-
It appears my battery is not recognized by the computer. In the battery pull down menu, I see an 'X' inside the battery icon, and when I click on the menu, I see a greyed out message 'No batteries available.' If I unplug the AC, the computer shuts do
-
Come on APPLE sort it out!
-
Base table name for fields from Material Master
Hi All, I want base table name which holds all possible values of following column: 1)Material Master : X-plant matl status from tab -basic data 1 2)Material Master: X-distr.chain status from tab -sales org 1 for example: Base table for Prod.hierarch
-
TS1368 Is Apple ever going to address this problem?
For weeks now I cannot connect to iTunes. Nothing that Apple has said works. You are getting more Microsoft-like every day?