Can't install the overvoice kit on my ipod nano 5

Hello,
i have ipod nano 5 for several years. i got a new computer and i wanted to transfer songs for my ipod.
i installed itunes and wanted to install the voice over kit. after downloading the kit the installation  faild with an 32 error.
i want to mention that i am a blind user so without the overvoice the i ipod is useless for me.
i tried to reinstall the itunes and it didnt help.
i use windows 7 on a dell laptop.
thanks!

Please tell me that it has NEVER been jailbroke.  If it has not been jailbroke, here are some standard repair procedures:
First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

Similar Messages

  • How can I change the 'Name' associated to my iPod Nano?

    I received an iPod Nano for my birthday and installed it on my girlfriends computer. She already owns an iPod, so when it asked the name of my iPod it defaulted to hers. So now my iPod is identified as "karenj's" iPod. I would prefer a my name, but am having a hard time figuring out how to change it.
    Can someone please help this iPod newbie who made a stupid mistake???
    thanks
    iPod 8GB Nano   Windows XP Pro  

    Have you seen this Apple article on renaming?
    http://docs.info.apple.com/article.html?artnum=60952

  • How can i load the device driver for my ipod nano 7th generation

    When I plug in my ipod nano 7th generation (for the first time), I am getting a message about "unknown device" and "driver not installed  properly".  Can I manually load the device driver some other way?

    Hi there Jen292,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • Can I use the USB cable of my ipod nano with my iPhone 3G?

    Hi,
    I am a new user of Apple. I have a ipod nano and a iPhone 3G. I wonder if I can use the USB cable for the ipod nano with my iPhone 3G. Just want to make sure if it is 100% compatible. Thank you very much.

    Thank you very much!

  • Can I copy the current content of my iPod nano 7 en masse to an iPad, rather than have to replicate the content item by item?

    I've had an iPod Nano 7 (16 GB) for just over a year, and I don't sync my entire music library at once--just a few gigs of favorites plus current podcast episodes and an occasional audiobook. I recently received a second-hand 3rd generation iPad (also 16GB) as a gift, and pondered adding at least a portion of the music I carry on the Nano to the iPad.  Is there a simple method in iTunes to just transfer the content from one to the other, rather than having to go over the list of songs on the Nano and transfer them from my PC to the iPad one by one?  I've already tried copy & paste and drag & drop methods from iPod to iPad directly, and neither of those appear to be options in iTunes.
    Barring that, is there a wired or wireless option for the two devices to communicate directly with each other, and allow the content on the Nano to play through the iPad--essentially using the iPad's sound system as speakers for the Nano, and eliminate the need to carry headphones or a portable speaker for the Nano?  Note that I mean the two linking directly to one another, without using a wi-fi network (as I don't have a portable wi-fi hotspot) or other method of outside connection (the iPad is not cellular-capable).  Just on a lark, I turned the Bluetooth capability on for both devices, and neither device detected the other, so I see that connecting via Bluetooth doesn't seem to be an option.  (You may also note by the above that my understanding of wireless connectivity in general is limited, so feel free to correct me about any misunderstandings that the above may indicate).
    Thanks for taking the time to read.

    The simplest method would have been to use one or more playlists to control what you sync to the iPod nano. You could then sync that same set of playlists to the new device. You cannot sync directly from one device to the other. All content is copied from iTunes. You may be able to export one or more XML playlists from the device, import those back into iTunes, and then add the playlists to your iPad.
    tt2

  • HT5470 How can I get the driver for my new ipod nano 7th gen for windows vista?

    Recently  purchased a Nano 7 to replace my 3rd generation struggling to connect to my windows vista laptop and Im looking for the driver, can anyone help?

    The driver you need to connect your device to Windows is installed during the iTunes installation. So if you already have iTunes installed, verify if it is updated. If it's not, then update, If it is already updated download a new .exe file from the Apple page, and reinstall it:
    http://support.apple.com/kb/HT1923
    Follow this article before removing iTunes and its components.
    Hope this helps!

  • Can i close the music screen on my ipod nano

    when i am not listening to music on my nano, i wanted to use it as a watch however i noticed the default screen will always be the music screen. is there any way i can close the music app and just have the watch stay open?

    Hi, if you swipe left back to the home screen then press sleep button it will default back to the clock. You have to press sleep on the home screen for it to open as a clock.

  • Can´t install voice over kit (error 32)

    I can´t install voice over kit in my ipod shuffle 2GB because I received error 32, I downloaded but then I cant install it.
    The error message: "iTunes can´t install VoiceOver Kit. An unknown error has occurred (32).

    sono andato su C: ho cercato ipodvoiceoversetup e l'ho installato sul pc. ho riprovato e ha funzionato

  • Error when installing the Integration Kit for SAP

    Hello,
    When installing the integration Kit I get the following error:
    The installation of BO XI Integration for SAP Solutions cannot continue because WACS has been installed with BO Enterprise.
    i have seen in BO-SAp Integration Kit Installation Error that I have to had selected the point Install Tomcat application server option, but I was not asked to.
    I'm following the blog BusinessObjects and SAP - Part 1 of 4, and my installation screens are similar but not equal. for example, I fon't have the installation type new, but the quickk type. And I cannot select the database, too.
    Of course the screen asking about the Web Application server with the option of installing the tomcat application server doesn't appear.
    What have I done wrong?
    What is the solution? Reinstalling everything but doing what?
    Thanks and regards,
    Ana.

    Hi Ingo,
    Yes, it is BO Edge.
    I have deinstalled the BO Edge sw and now I have installed it again. This time I have selected the export installation type and I have select the TOMCAT. The installation has finished successfully, but when installing the SAP integration Kit, I have the same problem. The message about the WACS already installed appears again.
    What else can I do?
    Thanks and regards,
    Ana.

  • I can't install the canon irc2380i

    I can't install the canon irc2380i printer on my macBook pro, OS 10.9.4- Thx for help

    The iR series support Canon's proprietary UFR2 printer language by default. So this would be the preferred driver to use if you are not sure if the optional Postscript print kit is installed in the copier.
    The iR C2380 does not support Bonjour, so you will need to know the IP address of the copier to add it to the Mac. So after you install this driver, select to add the printer and press the IP icon in the Add printer window. Then enter the IP address of the iR C2380, set the protocol to HP Jetdirect-Socket (important), leave the queue name blank and select "Canon iR C2380/2550" in the Use menu. Then click Add to complete the printer creation and then see if you can print.

  • Can't Install the X-fi I/O Drive Upgrade

    I've trying to install my X-fi I/O Dri've Upgrade Kit for two days, all i get is the following message "Setup is unable to detect a supported product on your system" when trying to install it. I can't install the software in the CD either, as someone else suggested, it won't install, gives an error message. I've tried everything suggested in the "read first before posting". I've searched troughout the forum, and couldn't find any solution, just more people with the exact same problem, and not a single reply. It would be nice to get a solution that works.

    Where are you connecting pwr? To the card or directly to the bay? If its plugged into the card then disconnect that and then there is a floopy pwr connector on the bay itself and thats where you hook up power. The only time you will connect pwr directly to the card is if you get the break out box as it will get its pwr from the card. If your already set up that way then sorry for intrudingJess

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Download the Brother Mountain Lion drivers here.

  • Hi I would be grateful if someone can help me, I have just bought a canon wireless printer, I only have an iPad so I can not install the cd that comes with the new printer yet it says it is compatible. How do I get it working I have a pay as you go 3G sim

    I do not use the Internet using wifi I use 3G mobile broadband and if I do need wifi it tells me I have to pay for it, but I can not work out how to install or connect my iPad with my new printer if there is not a cd slot or USB port. I only have an iPad no computer so how on earth do I use my printer with it if it I can't install the printer cd. I though I would be able to use Bluetooth and it would pick it up automatically but I am really confused now and don't know what to do please help.

    The iPad uses AirPrint technology to print to a printer. Check this Apple support page to see if your printer is listed as being AirPrint compatible.
    http://support.apple.com/kb/ht4356
    If your printer works with AirPrint you will need a Wi-Fi network in order to connect. That Wi-Fi network does not need to be connected to the Internet. As James Ward4 says, you'll need a Wi-Fi router to set up your network. Most routers require that a computer be used during the setup process. Perhaps you could use someone's computer to do the setup if you do not had one yourself. Once the router is set up you should be able to print.

  • I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

    I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for

  • Unable to find par file in the list in EP 7.0 when i export form NWDS

    Hi All, Can any one help me regarding that. i upload one par file through NWDS by using export.after that when i going to create one iview from par.in the PAR list my par file is not display. but the par file is avilable is the PCD. can any one sugge

  • Scenario File-XI-RFC-File

    hi, I have send a file to a RFC  using XI.The RFC.response is being received by XI correctly in XI Monitor. Now,I need to send this RFC.response to Flat file. For this,What i need to do? The only way is using BPM? ¿all the interfaces should be async?

  • Missing links in Indesign CS6!

    Good morning! Yesterday, my workmate and I did a .indb file in Indesign CS6. That .indb (book) is made of several .indd files (documents). So far so good. Then, after it was ready, we linked all images (using the Links panel) to each .indd and then w

  • Can't create event from iPad mail

    I Am using an iPad 2, with all updates.  When I try to create an event from an email, the right screen pops up, but the right hand side is cut off, so I have no save button.  Also can't change calendars, etc, because there is no save button on those

  • Can't read photos after reinstalling operating system to iOS8 on  iPhone4

    I upgraded my OS to iOS8 on my iPhone4 and since then cannot read new photos as I try to copy images to my PC. Prior to that each time I took a new photo set with my iPhone it would create a new folder in DCIM (or added to the latest), so it was pret