Can't install the software for the HP Photosmart

I'm tryin g to install a network printer , The printer is on the network but when I try to add it to my printerer i get the following message
Can't install the software for the HP Photosmart Plus B209a-m because it is not currently available from the Software Update server.

I followed another thread  and recieved this advice
That means you go here:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
to get the latest HP drivers.
Once I installed the drivers and SHUT DOWN the computer and printer it finally recognize the printer. I had no luck installing the drivers until I restarted the computer

Similar Messages

  • Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Download the Brother Mountain Lion drivers here.

  • TS3147 Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server.

    Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server???
    I am using mac osx 10.8 and now cant get print software for epson R2000 printer.

    After system update, my Epson Stylus SX 535WD was ''gone''. I tried in vain to add it as an IP printer (got the IP-address from the printer). The printer model is correctly recognized, software download starts -- but then  the "software ... is not currently available..."
    Resetting  the printing system did not help. Downloading Epson Printer Drivers v2.15.1 from  here
    did not help either, downloading Epson Printer Drivers.
    In the end, I re-installed the printer software from the original CDs. After that the printer showed up as a Bonjour Printer, and I could add it without problem.
    But note: although the printer is installed now and working properly, I still get the old error message (...software ..not available...) if I try to add the printer as an IP printer !?

  • HT204135 Can't install the software for the Brother HL-4070CDW series because it is not currently available from the Software Update server.

    I keep recieving this message for months since I upgraded to the Retina MacBook Pro, "Can't install the software for the Brother HL-4070CDW series because it is not currently available from the Software Update server."  I am unable to install my Brother HL-4070CDW Printer.  I have manually downloaded all the software directly from Brother as well as the Brother Printer Drivers from Apple, but still can not install

    That means you go here:
    http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
    to get the latest HP drivers.

  • When I try to install my Samsung printer i get the following - Can't install the software for the Samsung ML-2525W because it is not currently available from the Software Update server.

    I've downloaded samsung drivers from apple and still no luck. Whenever i try to install my samsung ml-2525w i get the following "Can't install the software for the Samsung ML-2525W because it is not currently available from the Software Update server." The printer is on the network and is on the list of available printers.

    For OS X 10.8 or later:
    OS X Mountain Lion: Reset the printing system
    For earlier versions of OS X:
    Mac OS X: How to reset the printing system

  • HT3669 What does this mean?  Can't install the software for the HP Photosmart A510 series because it is not currently available from the Software Update server."  My Imac finds the printer b ut when I go to install it, I get this error.  Please help.

    Can't install the software for the HP Photosmart A510 series because it is not currently available from the Software Update server.

    That means you go here:
    http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
    to get the latest HP drivers.

  • Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server.

    This is the the alert I keep getting when i try to add this new printer
    "Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server."
    Im am having BIG problems getting my printer to be recognized

    water bar wrote:
    I am getting the identical error message for an HP Officejet 7200 series printer.
    First there is a message that software is available from Apple.  You click to get it.  Then it tells you that it is not currently available from the software update server.
    I am running OS 10.8.2.  Printer is on my home network (not USB).
    I went to the Apple Software Dowload site and re-downloaded the latest "HewlettPackard Printer Drivers" (v.2.12) and installed them (twice).  No dice.
    Anybody found a way around this problem?
    I solved all print related issues by avoiding HP, worst software I ever saw, this may not work for you though.

  • Can't install the software for the Brother HL-2040 series because it is not currently available from the Software Update server.

    I suddenly can't use my printer!  It stopped working, so I followed apple's advice and deleted the printer, downloaded a new driver, now I get this message when I try to install it:
    Can't install the software for the Brother HL-2040 series because it is not currently available from the Software Update server.
    How do I get my printer working again??

    Where did you download the new driver from ?

  • Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server.

    I'm trying to setup my Canon MX870 USB ink jet printer plugged into my Airport Extreme's USB port.  However, I keep getting a message of; "Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server."  And then I have to click cancel.
    The "Print & Scan" from System Preferences, can see the printer as it has the NAME: Canon MX870 series,  and the LOCATION: 'the name of my network',  and USE: MX870 series.  But after clicking "Add", it tries to install the software (I've already installed the latest drivers however on my Mac Pro) and that's when I get this message;
    "Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server."
    Any ideas, help would be greatly appreciated!
    Marty

    Hello Marty,
    It sounds like you are not able to add your Canon printer in System Preferences.  I found an article with steps you can take to resolve this:
    Resolution
    USB printers and Bonjour-enabled network printers
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    You can find the full article here:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • "Can't install the software for the HP Officejet 6300 series because it is not currently available from the Software Update server" when I try to install a HP 6300 printer.

    Hi there
    I am trying to install a HP 6300 printer. I can see it when I look to install initially. Then click on installa nd the process starts and I get a message saying it is searching for the software. However after 20 seconds or so I get the message: Can't install the software for the HP Officejet 6300 series because it is not currently available from the Software Update server. This has happned over and over. I have updated the OSx and am 10.8.5. It works on my Mac Book Pro and did once work on the Mac Book Air but stopped so I unistalled and tried to reintsall but no joy. How can i gte the right drivers onto the laptop so that the seach finds them and connects the printer that it already sees?
    Many thanks
    Rob

    Hello there. I understand you are experiencing issues installing your printer on Mac 10.8.5. This document will provide multiple methods on performing this task: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03378792
    Please let me know if you have any other questions or concerns.
    I work on behalf of HP

  • TS3694 Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out.

    Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!

    Error -3259 is a network timeout error, usually. This article might help:
    http://support.apple.com/kb/TS2799

  • HT4623 I tried to update my ipad air to IOS 7.1 but it shows error that "The software for the iphone was corrupted during download" How can I fix this problem ?

    I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
    How can I fix this error ?

    I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
    In the terminal (it kept failing to download in Safari):
    curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
    Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
    Quit and relaunch iTunes.
    Should now work for you.

  • HT4972 I can't update my iPad I keep getting a message that the software for the I pad was corrupted during download and err=1403.  Any suggestions

    I can't update my iPad. The message says, the software for the iPad was corrupted during download.  Err=1403

    What did iTunes Support say when you contacted them ? If it's been more than 48 hours since you contacted them and you haven't had a reply then contact them again.
    If you haven't yet contacted them, then to do so :
    - go to http://www.apple.com/support/itunes/ww
    - click on your country's flag
    - click on the Contact Support at the bottom of the left-hand column
    - click on Contact iTunes Store Support on the right-hand side of the page
    - then Purchases, Billing & Redemption

  • PLEASE HELP! Does anyone have the software for the old 20" cinema display?

    CAN ANYONE HELP?! Does anyone have the software for the old 20" cinema display model number M88932M/A? (brought early 2004- the version with no control button) I can't find my manual or software CD for my Apple Display anywhere - I can't remember if the screen was even shipped with them. Because do not have this software I can't control anything to do with my screen e.g the brightness/contrast etc.
    I can't find the link to download the software anywhere on the apple website! (I have spent hours looking). If you know the link, I'd be really grateful if you could email it to to me. Or does anyone have the software CD that I could borrow and then return immediately? Please get in touch if you do. Many thanks! email address: [email protected]

    Hi Nathan,
    Thank you so much that was very kind of you! You must have the same screen as me as mine is the clear fronted on too.
    I have downloaded the OS X version, When I went to install it, but I got a message up saying the software was already on my machine. It must part of the Tiger OS, becuase I haven't installed anything.
    I have a quick question for you . . . Should the software you put up for me enable to me run "Display Calibrator Assistant" in the System preference or is the software from the CD hidden something else and I am looking in the wrong place on my mac?
    I did read somewhere when I got under the apple menu there should be a "monitor" menu - I don't have that but that maybe a classic thing?
    Many thanks for you help I really appreciate it!
    Purplecrazymoo

  • I have been trying to update to iOS 5 and every time I hit update it says, " There was a problem downloading the software for the iPhone. The network connection could not be established."  What do I need to do to update to solve this problem?

    I have been trying to update my iPhone 4 with iOS 5 for about 30 minutes and I keep getting the same thing. It says,"There was a problem downloading the software for the iPhone. The network connection could not be established." What do I need to do to solve this problem?

    iOS: Resolving update and restore alert messages
    For error -50: See error 13 and 14: 
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

Maybe you are looking for